NKK M2122LEW03 General specification Datasheet

A
Electrical Capacity (Resistive Load)
Power Level (silver):
Logic Level (gold):
Programmable Illuminated PB
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Angle of Throw:
Materials & Finishes
Bushing:
Housing:
Mounting Bracket:
Movable Contacts:
Stationary Contacts:
Lamp Contacts:
Base:
Switch Terminals:
Lamp Terminals:
Environmental Data
Operating Temp Range:
Humidity:
Vibration:
Shock:
Tilt
Tactiles
Slides
Rotaries
Keylocks
Other Ratings
Installation
Touch
Mounting Torque:
Soldering Time & Temp:
Cleaning:
Standards & Certifications
Flammability Standards:
UL:
Accessories
Indicators
LED Tipped Toggles
General Specifications
Pushbuttons
Rockers
Toggles
Series M2100
Supplement
CSA:
A80
6A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
10 milliohms maximum for silver; 20 milliohms maximum for gold
1,000 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
50,000 operations minimum
25,000 operations minimum
On-to-On Position
Off-to-On Position
Single Pole
3.19N
3.92N
Double Pole
4.41N
7.06N
20°
Brass with nickel plating
Stainless steel
Steel with tin plating
Silver alloy or silver alloy with gold plating
Silver with silver plating or copper or brass with gold plating
Phosphor bronze
Diallyl phthalate (UL94V-0)
Copper with silver or gold plating
Brass with silver or gold plating
–10°C through +55°C (+14°F through +131°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
1.47Nm (13 lb•in) for double nut; .67Nm (6 lb•in) for single nut
Wave Soldering (PC version): See Profile B in Supplement section.
Manual Soldering: See Profile B in Supplement section.
Note: Lever must be in center position while soldering.
PC mountable device is not process sealed. Hand clean locally using alcohol based solution.
UL94V-0 base
File No. E44145 - Recognized only when ordered with marking on switch.
Add “/U” to end of part number to order UL recognized switch.
Single pole with synchronous circuits & single color LEDs & solder lug or PC recognized at
6A @ 125V AC.
File No. 023535_0_000 - Certified only when ordered with marking on switch.
Add “/C” to end of part number to order CSA certified switch.
All single pole with synchronous circuits & single color LEDs certified at 6A @ 125V AC.
www.nkkswitches.com
3/13/17
A
Rockers
Distinctive Characteristics
Toggles
Series M2100
LED Tipped Toggles
Pushbuttons
Industry’s first LED illumination at tip of toggle switches.
Programmable Illuminated PB
Single color LEDs of red, yellow, and green, plus bicolor red/green,
to meet varied design requirements.
LEDs can operate independently from or synchronously with
switching operation.
Antijamming feature to protect contacts from damage due
to excessive downward force on the toggle.
Keylocks
High torque bushing prevents the bushing from rotating
or separating from the metal frame during installation.
Rotaries
Stainless steel frame resists corrosion.
Slides
Silver contacts are of specially composed alloy for
hardness.
High insulating barriers protect against crossover
in double pole devices.
Tactiles
Terminals are molded in and epoxy sealed to lock
out flux, dust, and other contaminants.
Tilt
1,500V dielectric strength between switch contacts
and case is accomplished by clinching the frame
away from the terminals.
Supplement
Accessories
Indicators
Touch
Actual Size
www.nkkswitches.com
A81
A
LED Tipped Toggles
TYPICAL SWITCH ORDERING EXAMPLE
M21
Pushbuttons
Rockers
Toggles
Series M2100
1
2
Programmable Illuminated PB
Poles
1
SPDT
*2
DPDT
T
L
Isolated
T
Synchronous
Circuits
W
Contact Materials
& Ratings
LED Circuits &
Actuator Types
* Available only with
Terminals 01, 02, 03
Keylocks
C
W
Silver; Rated
6A @ 125V AC
G
Gold; Rated 0.4VA max
@ 28V AC/DC max
LED Colors
2
ON
NONE
ON
3
ON
OFF
ON
Single Color
Rotaries
6mm Thread
(Metric)
01
Solder Lug with Threaded Bushing
02
Quick Connect with Threaded Bushing
E
Yellow
03
Straight PC with Threaded Bushing
F
Green
30
Right Angle PC with Smooth Bushing
(available with gold contacts only)
Slides
Red/Green
Switches are supplied without UL & CSA marking unless specified.
UL & CSA recognized only when ordered with marking on the switch.
Specific models, ratings, & ordering instructions are noted on the
General Specifications page.
Tilt
Tactiles
/M
1/4–40 Thread
(Inch)
Terminals & Mounting Types
IMPORTANT:
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
Touch
M2112TCW01
Red LED
Synchronous LED Circuit
in Actuator
Indicators
No
Code
Red
CF
SPDT
ON-NONE-ON
Switch Circuit
Accessories
Threaded Bushings
C
Bicolor
Supplement
Silver Contacts with
6-Amp Rating
A82
01
www.nkkswitches.com
1/4–40 Threaded Bushing
Solder Lug Terminals
A
POLES & CIRCUITS & LED ILLUMINATION
Toggle Position &
Terminal Numbers
ON
4-6
Synchronous Single Color LED
Connected LED Terminals
ON
4-6
NONE
NONE
OFF
OPEN
Synchronous Bicolor LED
Connected LED Terminals
Red
5-6
NONE
NONE
Green
5-4
ON
2-3
OFF
OPEN
ON
2-1
SPDT
LED Circuit
Isolated LEDs (see schematics)
Connected LED Terminals
ON
4-6
ON
4-6
ON
4-6
Synchronous Single Color LED
Connected LED Terminals
ON
4-6
OFF
OPEN
ON
4-6
Synchronous Bicolor LED
Connected LED Terminals
Red
5-6
OFF
OPEN
Green
5-4
ON
2-3 5-6
NONE
NONE
ON
2-1 5-4
Isolated LEDs (see schematics)
Connected LED Terminals
ON
7-9
NONE
NONE
ON
7-9
Synchronous Single Color LED
Connected LED Terminals
ON
7-9
NONE
NONE
OFF
OPEN
Synchronous Bicolor LED
Connected LED Terminals
Red
8-9
NONE
NONE
Green
8-7
ON
2-3 5-6
OFF
OPEN
ON
2-1 5-4
M2122
DPDT
LED Circuit
Connected Power Terminals
M2123
DPDT
LED Circuit
Connected Power Terminals
Isolated LEDs (see schematics)
Connected LED Terminals
ON
7-9
ON
7-9
ON
7-9
Synchronous Single Color LED
Connected LED Terminals
ON
7-9
OFF
OPEN
ON
7-9
Synchronous Bicolor LED
Connected LED Terminals
Red
8-9
OFF
OPEN
Green
8-7
L(+)
3
1
L(-)
4
6
2 (COM)
Red
Green
Isolated
Bicolor LED
3
1
6 COM
(+) Red
4 ( ) Green
2 (COM)
Synchronous
Single Color
LED
L(+)
3
1
L(-)
4
6
2 (COM)
Synchronous
Bicolor LED
Red
Green
3
1
6
5 COM (+)
4
External Connection
Isolated
Single Color
LED
2 (COM)
5
L(+)
3
1
6
4
2 (COM)
Isolated
Bicolor LED
Synchronous
Single Color
LED
3
5
1
3
1
4
9 COM
(+) Red
7 ( ) Green
5
6
2 (COM)
Synchronous
Bicolor LED
9
Red
Green
6
2 (COM)
L(-)
7
4
7
L(+)
5
9
L(-)
Red
Green
3
1
6
4
9
8 COM (+)
7
External Connection
Supplement
LED Circuit
M2113
Connected Power Terminals
Rockers
NONE
NONE
Pushbuttons
ON
4-6
Programmable Illuminated PB
Isolated LEDs (see schematics)
Connected LED Terminals
2 (COM)
Isolated
Single Color
LED
Keylocks
ON
2-1
SPDT
Rotaries
NONE
NONE
M2112
Connected Power Terminals
Slides
ON
2-3
Keyway
Notes: Terminal numbers are not actually on the
switch.
LEDs require an external power source.
Tactiles
Up
Tilt
Center
Touch
Down
Indicators
Pole & Throw
Accessories
Model
Schematics
Toggles
Series M2100
LED Tipped Toggles
www.nkkswitches.com
A83
A
The electrical specifications shown are determined at a basic temperature of 25°C. LED circuit is isolated
and requires an external power source. If the source voltage exceeds the rated voltage, a ballast resistor
is required. The resistor value can be calculated by using the formula in Supplement Section.
Single Color
Bicolor
C
E
F
CF
Color
Red
Yellow
Green
Red/Green
Units
Programmable Illuminated PB
The LED is an integral part of the switch
and not available separately.
Maximum Forward Current
I FM
30
30
30
25
mA
Typical Forward Current
IF
20
20
20
10
mA
Forward Voltage
VF
2.2
2.1
2.2
1.7/2.0
V
Maximum Reverse Voltage
VRM
4
4
4
–––
V
Current Reduction Rate Above 25°C
∆I F
0.38
0.38
0.38
0.33/0.33
mA/°C
Keylocks
Pushbuttons
LED Tipped Toggles
LED COLORS & SPECIFICATIONS
Rockers
Toggles
Series M2100
Ambient Temperature Range
Bicolor LED is translucent white when unlit.
–10° ~ +55°C
Rotaries
LED CIRCUIT, TOGGLE, & MOUNTING TYPE COMBINATIONS
L
Toggle with Isolated LED Circuit
Slides
T
Toggle with Synchronous LED Circuit
(5.0) Dia
.197
(14.7)
.579
(14.7)
.579
(6.2) Dia
.244
1/4-40 Thd
Standard Hardware: 2 AT513H
Hex Nuts, 1 AT507H Locking Ring,
1 AT509 Lockwasher Standard &
optional hardware details in
Accessories & Hardware section.
Threaded Bushing
combines with Terminal
codes 01, 02, & 03.
Smooth Bushing
combines with
Terminal code 30.
(6.5) Dia
.256
(2.2) Dia
.087
(6.1)
.240
Max. Panel
Thickness without
Locking Ring
.134” (3.4mm)
(6.5) Dia
.256
(5.8)
.228
(0.6)
.024
Tilt
Tactiles
Finish: Brushed aluminum
Max. Panel
Thickness with
Standard Hardware
.102” (2.6mm)
20°
20°
(5.0) Dia
.197
Solder Lug
(4.8)
.189
1/4-40 Thd
20°
(2.5) Dia
.098
(5.0) Dia
.197
Accessories
Supplement
Single Pole
Keyway
Indicators
Touch
TYPICAL SWITCH DIMENSIONS
M2112TCFW01
A84
(12.7)
.500
(0.8) Typ
.031
(4.7) Typ
.185
(14.7)
.579
(8.0)
.315
(0.9)
.035
(20.3)
.799
(6.35)
.250
Single color LED switch does not have terminal 5.
www.nkkswitches.com
(1.17) Typ
.046
6
3
5
2
4
1
(4.8)
.189
(13.0)
.512
(2.0) Typ
.079
A
TYPICAL SWITCH DIMENSIONS
Solder Lug
Rockers
Double Pole
Toggles
Series M2100
LED Tipped Toggles
(17.5)
.689
(14.7)
.579
(0.9)
.035
(8.0)
.315
(20.3)
.799
6
3
8
5
2
7
4
1
(2.0) Typ
.079
(4.8) Typ
.189
(1.17) Typ
.046
(6.35)
.250
(13.0)
.512
M2122TCFW01
Single color LED switch does not have terminal 8.
(2.5) Dia
.098
(6.2) Dia
.244
(5.0) Dia
.197
(2.9)
.114
(1.4)
.055
4
5
6
1
2
3
(12.7)
.500
Slides
Keyway
Right Angle PC
Rotaries
Single Pole Only
(4.3)
.169
(5.1)
.201
(13.0)
.512
(14.7)
.579
(7.6)
.299
(0.4)
.016
(1.1)
.043
(16.4)
.646
Single color LED switch does not have terminal 5.
(1.27) Typ
.050
(3.81)
.150
(0.8) Typ
.031
(4.7) Typ
.185
Gold contact material only
Tactiles
(2.5) Dia
.098
(5.0) Dia
.197
(4.7) Typ
.185
9
Pushbuttons
20°
(0.8) Typ
.031
Programmable Illuminated PB
(4.8)
.189
1/4-40 Thd
Keylocks
Keyway
M2112TCFG30
Silver over Silver
Power Level
6A @ 125V AC & 3A @ 250V AC
G
Gold over Brass or Copper
Logic Level
0.4VA maximum @ 28V AC/DC maximum
Accessories
Indicators
W
Touch
CONTACT MATERIALS & RATINGS
Tilt
(6.35)
.250
Supplement
Complete explanation of operating range in Supplement section.
www.nkkswitches.com
A85
TERMINALS
01
Solder Lug with
Turret LED Terminal
(6.35) (4.8)
.250 .189
Quick Connect
(6.35) (4.8)
.250 .189
(2.0)
.079
(1.1)
.043
(1.17)
.046
03
Straight PC with
Turret LED Terminal
Single Pole
(4.8)
.189
3
(6.35) (4.8)
.250 .189
Epoxy Seal
(1.17) Typ
.046
(4.8)
.189
Thk = (0.8) Typ
.031
2
1
Double Pole
Single color LED
& isolated bicolor
LED switches do not
have terminal 5.
6
5
Epoxy Seal
(1.57) Typ
.062
(4.8)
.189
Thk = (0.8) Typ
.031
(4.8)
.189
Thk = (0.8) Typ
.031
(4.7) Typ
.185
4
3
6
9
2
5
8
1
4
7
(4.8) Typ
.189
(4.7) Typ
.185
Single color LED
& isolated bicolor
LED switches do not
have terminal 8.
(1.8) Dia Typ
.073
(1.8) Dia Typ
.073
Single Pole
30
(4.7) Typ
.185
Right Angle PC
6
5
4
3
2
1
LED terminals
only available
in brass with
silver plating
(3.81)
.150
(16.4)
.646
Single color LED
& isolated bicolor
LED switches do not
have terminal 5.
(1.8) Dia Typ
.073
(2.54) Typ
.100
Tactiles
Slides
Rotaries
02
(2.0)
.079
(4.0)
.157
Epoxy Seal
Keylocks
Programmable Illuminated PB
LED Tipped Toggles
A
Pushbuttons
Rockers
Toggles
Series M2100
Touch
Tilt
STANDARD MOUNTING HARDWARE
AT513H Hexagon Nut
(2 per switch)
AT507H Locking Ring
(1 per switch)
AT509 Lockwasher
(1 per switch)
Material:
Brass with nickel plating
Material:
Steel with chromate over zinc
Material:
Steel with chromate over zinc
(6.35) Dia
.250
Indicators
1/4-40 Thd
(8.0)
.315
(12.0) Dia
.472
(2.0)
.079
(6.4) Dia (10.2) Dia
.252
.402
Accessories
(5.8)
.229
(9.0)
.354
(1.5)
.059
(1.7)
.067
(0.8)
.031
Supplement
Optional Hardware: Knurled nuts, dress nuts, and ON-OFF plates are available;
see details in Accessories & Hardware section.
A86
www.nkkswitches.com
(0.5)
.020
Similar pages