NDK NT2016SC Temperature compensated crystal oscillator Datasheet

Crystal Oscillator
NT2016SC
Temperature Compensated Crystal Oscillator(TCXO)
with two outputs of same frequency and E/D function
■ Main Application
Smartphone / Mobile phone, Wireless module, and GPS / GNSS module, etc.
■ Features
● Supports low power supply voltage. (Supports DC +1.7V to +3.3V. Standard
specification : +1.8V)
● Ultra-compact and light with a height, cubic volume, and weight of Max. 0.8 mm,
0.0022 cm3, and 0.008 g, respectively.
● A surface-mount crystal oscillator. (Reflow soldering is possible.)
● Lead-free. Meets the requirements for re-flow profiling using lead-free solder.
● With Enable / Disable function (This function can be used for both output1 and 2).
● It is possible to choose the AFC function instead of the Enable/Disable function for
output 2.
■ Specifications
Model
Item
NT2016SC
Nominal Frequency Range (MHz)
10 to 52
Standard Frequency (MHz)
26
38.4
Supply Voltage [VCC] (V)
52
+1.8
Load Impedance
10 kΩ//10 pF
Current Consumption (mA) (Two outputs)
Max. 2.0
Max. 2.2
Output Voltage
Max. 2.4
Min. 0.8 V(p-p) (DC Coupling *1)
Frequency/Temperature Characteristics
Max. ±2.0×10–6 (Max. ±0.5×10–6 available)
Operating Temperature Range (°C)
–30 to +85
Storage Temperature Range (°C)
–40 to +85
Frequency/Voltage Coefficient
Max. ±0.1×10–6/+1.8 V±5 %
Frequency/Load Coefficient
Max. ±0.1×10–6/(10 kΩ//10 pF) ±10 %
Long-term Frequency Stability
Max. ±1.0×10–6/year
Specification Number
NSA3502B
NSA3502C
NSA3502D
• Frequency setting conditions : Frequencies are set at normal temperatures (+25±2 °C).
*1. A DC-cut capacitor is not embedded in this crystal oscillator. Connect a DC-cut capacitor (1,000 pF) to the line-out terminal of the oscillator.
■ Dimensions
#6
#5
Terminal land connections
#4
1.6±0.1
#1
#2
2.0±0.1
#3
#3
Control
Voltage input
(Enable/
Enable/Disable
or
Disable)
output2
AFC forfor
output2
Output2 (Analog)
GND
#4
Output1 (Analog)
#5
Control
Voltage (Enable/
Enable/Disable
input
for output1
Disable)
for output1
#6
VCC
#6
#5 0.5
#4
0.4±0.1
(0.5)
(0.6)
(1.2)
(0.6)
(0.45)
#3
0.6±0.1
#2
0.4±0.05
1.2±0.05
#1
(0.8) (0.4) (0.8)
0.7±0.1
#1
#2
mm
1803D_NT2016SC_e
Similar pages