AZ683 MINIATURE POWER RELAY FEATURES • • • • • • • • AC coils Dielectric strength 5000 Vrms Low cost Flux tight package 10 Amp switching - single pole contacts Isolation spacing greater than 8mm Molded materials: all 94V-0 UL and Canadian file E43203 GENERAL DATA CONTACTS Arrangement SPST (1 Form A) SPDT (1 Form C) Ratings Resistive load: Max. switched power: 300 W, 2500 VA Max. switched current: 10 A Max. switched voltage: 150 VDC/400 VAC Inductive load: (cosØ =0.4) Max. switched power: 150W or 1875VA Max. Switched current: 10A Max. switched voltage: 125VDC or 400 VAC Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR 10 A 250 VAC, resistive 1/ HP 277 VAC 2 Min. Load 5 VDC, .01 A Material Silver alloy Resistance 30 milliohms initially (6V, 1A method) COIL Power At Pickup Voltage (typical) Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at rated load Operate Time (typical) 8 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance 1000 megohms min. at 20°C, 500 VDC 50% RH Dropout Greater than 30% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) Vibration 0.062" DA at 10–55 Hz Shock 10 g Enclosure PC (94V-0) Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) 576 mW Max. Continuous Dissipation 1.5 W at 20°C (68°F) ambient 1.2 W at 40°C (104°F) ambient Max. Solder Time 5 seconds Temperature Rise 36°C (65°F) at nominal coil voltage Weight 17 grams Temperature Max. 105°C (221°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. www.marelcom.ch AZ683 RELAY ORDERING DATA COIL SPECIFICATIONS - AC Coil Nominal Coil VAC 6 Must Operate VAC 4.8 ORDER NUMBER Max. Continuous VAC 7.8 Nominal Current mA ±10% 150.0 Coil Resistance ±10% 16 Form A (SPST) AZ683-1A-6A Form C (SPDT) AZ683-1C-6A 12 9.6 15.6 75.0 65 AZ683-1A-12A AZ683-1C-12A 24 19.2 31.2 37.5 260 AZ683-1A-24A AZ683-1C-24A 50 40.0 65.0 18.0 1130 AZ683-1A-50A AZ683-1C-50A 110 88.0 143.0 10.6 4600 AZ683-1A-110A AZ683-1C-110A 220 176.0 286.0 5.3 20200 AZ683-1A-220A AZ683-1C-220A MECHANICAL DATA .023 (0.58) x .023 (0.58) 0.016 (0.4) x 0.040 (1.015) .035 Dia. (0.9) 2 places (2 places Form A (3 places Form C) Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" www.marelcom.ch