LIGITEK LFDBK2060-HV48-O-PF High voltage led lamp Datasheet

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
HIGH VOLTAGE LED LAMPS
Pb
Lead-Free Parts
LFDBK2060/HV48-O-PF
DATA SHEET
DOC. NO :
QW0905-:LFDBK2060/HV48-O-PF
REV
:
A
DATE
:
05 - Mar. - 2010
發行
立碁電子
DCC
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 1/5
PART NO. LFDBK2060/HV48-O-PF
Package Dimensions
□0.5
TYP
3.0
4.0
4.2
5.2
11.0±2
29.6MIN
Pyrocondensation Cannula
2.54TYP
+
-
Note : 1.All dimension are in millimeter tolerance is ± 0.25mm unless otherwise noted.
2.Specifications are subject to change without notice.
Features:
1. Built-in IC chip manufactured by CMOS technology
2. A wide range of operating voltage:+5V~+48V
3. LED will blink 64 times before going stedy when power on.
4. Duty cycle 50%
5. Blink 64 times spend 25~60 seconds.
6. Input current is around 7.3mA@Voltage=48V
7. Luminous intensity at +48V is 65mcd MIN and 120mcd TYP.
8. LED emitting color is blue, lens of LED is blue.
Applications:
Direct connect it to telephone circuits
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 2/5
PART NO. LFDBK2060/HV48-O-PF
Absolute Maximum Ratings at Ta=25 ℃
Symbol
Ratings
UNIT
Forward Voltage
FV
50
V
Reverse Voltage
Vr
0.4
V
Operating Temperature
Topr
-0 ~ +85
℃
Storage Temperature
Tstg
-20 ~ +85
℃
Parameter
Typical Electrical & Optical Characteristics (Ta=25 ℃)
PART NO
COLOR
MATERIAL
Emitted
LFDBK2060/HV48-O-PF
InGaN/GaN Blue
Dominant
wave
length
λDnm
Spectral
halfwidth
△λ nm
Lens
Blue Diffused
470
30
Pulse
rate(Hz)
volt=48v
Luminous
intensity
volt=48V
(mcd)
Operating
voltage
Min. Max. Min.
Typ. Min. Max.
1.6
120
Note : The luminous intensity data did not including ±15% testing tolerance.
2.5
65
5.0
50
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 3/5
PART NO. LFDBK2060/HV48-O-PF
Typical Electro-Optical Characteristics Curve
DBK CHIP
Fig.1 Forward current vs. Forward Voltage
Fig.2 Relative Intensity vs. Forward Current
3.0
Relative Intensity
Normalize @20mA
Forward Current(mA)
1000
100
10
1
01
2.5
2.0
1.5
1.0
0.5
0.0
1.0
2.0
3.0
4.0
5.0
1
10
1.2
1.1
1.0
0.9
0.8
0
20
40
60
80
100
Fig.5 Relative Intensity vs. Wavelength
1.0
0.5
0.0
400
450
500
Wavelength (nm)
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-40
-20
0
20
40
60
80
Ambient Temperature( ℃)
Ambient Temperature(℃)
Relative Intensity@20mA
Fig.4 Relative Intensity vs. Temperature
Relative Intensity@20mA
Normalize @25 ℃
Forward Voltage@20mA
Normalize @25℃
Fig.3 Forward Voltage vs. Temperature
-20
1000
Forward Current(mA)
Forward Voltage(V)
-40
100
550
100
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 4/5
PART NO. LFDBK2060/HV48-O-PF
Soldering Condition(Pb-Free)
1.Iron:
Soldering Iron:30W Max
Temperature 350°C Max
Soldering Time:3 Seconds Max(One time only)
Distance:2mm Min(From solder joint to body)
2.Wave Soldering Profile
Dip Soldering
Preheat: 120°C Max
Preheat time: 60seconds Max
Ramp-up
2°C/sec(max)
Ramp-Down:-5°C/sec(max)
Solder Bath:260°C Max
Dipping Time:3 seconds Max
Distance:2mm Min(From solder joint to body)
Temp(°C)
260°C3sec Max
260°
5°/sec
max
120°
25°
0° 0
2°/sec
max
Preheat
60 Seconds Max
50
100
Note: 1.Wave solder should not be made more than one time.
2.You can just only select one of the soldering conditions as above.
150
Time(sec)
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 5/5
PART NO. LFDBK2060/HV48-O-PF
Reliability Test:
Test Item
Test Condition
Description
Reference
Standard
Operating Life Test
1.Under Room Temperature
2.If=20mA
3.t=1000 hrs (-24hrs, +72hrs)
This test is conducted for the purpose
of detemining the resistance of a part
in electrical and themal stressed.
MIL-STD-750: 1026
MIL-STD-883: 1005
JIS C 7021: B-1
High Temperature
Storage Test
1.Ta=105 ℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance of
the device which is laid under condition
of high temperature for hours.
MIL-STD-883:1008
JIS C 7021: B-10
Low Temperature
Storage Test
1.Ta=-40 ℃±5 ℃
2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance
of the device which is laid under
condition of low temperature for hours.
High Temperature
High Humidity Test
1.Ta=65 ℃±5 ℃
2.RH=90 %~95%
3.t=240hrs ±2hrs
The purpose of this test is the resistance
of the device under tropical for hours.
1.Ta=105 ℃±5℃&-40 ℃±5℃
(10min) (10min)
2.total 10 cycles
The purpose of this is the resistance of
the device to sudden extreme changes
in high and low temperature.
MIL-STD-202: 107D
MIL-STD-750: 1051
MIL-STD-883: 1011
Solder Resistance
Test
1.T.Sol=260 ℃±5 ℃
2.Dwell time= 10 ±1sec.
This test intended to determine the
thermal characteristic resistance
of the device to sudden exposures
at extreme changes in temperature
when soldering the lead wire.
MIL-STD-202: 210A
MIL-STD-750: 2031
JIS C 7021: A-1
Solderability Test
1.T.Sol=230 ℃±5 ℃
2.Dwell time=5 ±1sec
This test intended to see soldering well
performed or not.
MIL-STD-202: 208D
MIL-STD-750: 2026
MIL-STD-883: 2003
JIS C 7021: A-2
Thermal Shock Test
JIS C 7021: B-12
MIL-STD-202:103B
JIS C 7021: B-11
Similar pages