High Value / High Voltage Resistors Type HB Series Key Features I Up to 15kV Element Voltage • Unique specification for the most demanding applications I High Ratio of Size to Power • The solution to your PCB population problems I 1kW to 1GW • Coupled with 1% tolerance gives ultimate design flexibility I Established Product with Proven Reliability I Low Inductance • For the fastest switching speeds Applications I High Voltage I Voltage Divider I Surge I Filter I Balancing I Inrush Limiting TE Connectivity (TE) is a leading supplier of standard and custom designed high value/high voltage resistors for high voltage, industrial, control, medical and general-purpose use. The HB is a tough epoxy coated high voltage resistor, with axial or radial leads, values up to 1G Ohm and an operational voltage to 20kV as standard and 30kV to order. The resistors are made from quality materials for optimum reliability and stability. TE can test resistors to conform to relevant international, MIL or customer specifications. TE is happy to advise on the use of resistors for high frequency applications and to supply information for high voltage use. Characteristics - Electrical Power Dissipation - Power @ 20°C (W): @ 70°C: Ohmic Value - Min (Ohms): Max: Resistance Tolerance (%) (Tighter By Request): Maximum Working Voltage - DC or ACrms (Volts): Insulation Resistance - Epoxy Coated, @500V dc (Ohms): Load Stability - 1000hr’s @ 70°C (%): Temp. Rapid Change - -55°C to 125°C for 5 cycles (ΔR): Endurance - 1000 Hours @ 200°C (ΔR): Resistance to Soldering Heat - 350°C for 3.5seconds (ΔR): Temperature Coefficient (ppm/°C): (±20ppm/°C available to special order) Voltage Coefficient: HBA 0.8 0.4 1K 120M 1%, 2%, 5% 1kV >106MΩ ±0.5% ±0.1% <=2% 0.05% ±100ppm/°C HB1 2.0 1.0 10K 1G 1%, 2%, 5% 7.5kV >106MΩ ±0.5% ±0.1% <=2% 0.05% ±100ppm/°C Negligible up to 100K Increasing to 0.02ppm/Volt at 800K Increasing to 1.0ppm/Volt at 5M0 Increasing to 2.0ppm/Volt at 50M Increasing to 8.0ppm/Volt at 1000M Ambient Temperature Range (°C): Long Term Damp Heat (%): (Steady state 56 Days 95% RH at 40°C) Noise (Quantech) Dependent on Resistor Type and Value: Encapsulation: Solvent Resistance: Lead Material: Lead Length: Lead Diameter: 1773310 CIS BI 06/2011 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. -55 to 125 0.25% -55 to 125 0.25% HB3 4.0 2.0 10K 1G 1%, 2%, 5% 15kV >106MΩ ±0.5% ±0.1% <=2% 0.05% ±100ppm/°C Negligible up to 200K Increasing to 0.01ppm/Volt at 1M0 Increasing to 1.0ppm/Volt at 10M Increasing to 2.0ppm/Volt at 100M Increasing to 8.0ppm/Volt at 1000M -55 to 125 0.25% -20dB (0.1μ V/V) at lower values +10dB (3.3μ V/V) at higher values Epoxy coating (Optional) Print will withstand the action of all commonly used industrial solvents. Tinned copper wire Minimum 20mm Nominal 0.6 ± 0.05mm For email, phone or live chat, go to: te.com/help High Value / High Voltage Resistors Type HB Series Dimensions Type HBA, HB1 & HB3 (Radial) Type HB1 & HB3 (Axial) C B F A D G H E Type HBA HB1 HB3 A B C D E F G H I Uncoated 10.2 7 1.75 60.2 5.0 – – – – Epoxy Coated 12.5 8 2.6 60.5 5.0 – – – – Uncoated 8.4 26 1.5 33.8 22.9 26 66 1.5 8.4 Epoxy Coated 10.4 26.5 3.0 35.8 22.9 26.3 66 3 9.2 Uncoated 8.4 51.1 1.5 33.8 48.3 51.1 91.1 1.5 8.4 Epoxy Coated 10.4 52 3.0 35.8 48.3 53.5 91.1 3 9.6 Surface Temperature Rise Derating Curve 100 4.5 HB3 90 Surface Temp. Rise (°C) 4 Power (W) 3.5 3 2.5 HB1 2 1.5 HBA 1 HBA 80 HB3 HB1 70 60 50 40 30 20 10 0.5 0 0 0 20 40 60 80 100 Ambient Temperature (degC) 120 0 140 0.5 1 1.5 2 2.5 3 Power Dissipation (Watts) 3.5 4 How to Order HB Common Part HB- High Value / High Voltage Resistor 3 1K0 Power Rating Resistance Value @ 70°C 1Kohm A - 0.4W 1 - 1.0W 3 - 2.0W (1000Ω) 1K0 1Mohm (1000000Ω) 1M0 J Z R E Tolerance Temp. Coefficient of Resistance Lead Style Coating Styles R - Radial Leads F - 1% G - 2% J - 5% Z - 100ppm A - Axial Leads (HB1, HB3 only for Axial Leads) E - Epoxy Blue Coating TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Other logos, product and Company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.