ON EFCP1313-4CC-037 General-purpose switching device application Datasheet

Ordering number : ENA1477
ON Semiconductor
DATA SHEET
N-Channel Silicon MOSFET
EFC4612R
General-Purpose Switching Device
Applications
Features
•
•
•
•
2.5V drive.
Built-in gate protection resistor.
Best suited for LiB charging and discharging switch.
Common-drain type.
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Source-to-Source Voltage
Gate-to-Source Voltage
Source Current (DC)
Source Current (Pulse)
Total Dissipation
Symbol
Conditions
Ratings
VSSS
VGSS
IS
ISP
Channel Temperature
PT
Tch
Storage Temperature
Tstg
Unit
24
V
±12
V
6
A
PW≤10μs, duty cycle≤1%
60
A
When mounted on ceramic substrate (5000mm2×0.8mm)
1.6
W
150
°C
--55 to +150
°C
Electrical Characteristics at Ta=25°C
Parameter
Symbol
Ratings
Conditions
min
Source-to-Source Breakdown Voltage
V(BR)SSS
ISSS
IS=1mA, VGS=0V
VSS=20V, VGS=0V
Test Circuit 1
Zero-Gate Voltage Source Current
Gate-to-Source Leakage Current
IGSS
VGS=±8V, VSS=0V
Test Circuit 2
Cutoff Voltage
VGS(off)
Test Circuit 3
Forward Transfer Admittance
| yfs |
VSS=10V, IS=1mA
VSS=10V, IS=3A
Marking : FN
© 2011, SCILLC. All rights reserved.
Jan-2011, Rev. 0
typ
24
V
Test Circuit 1
Test Circuit 4
Unit
max
0.5
1
μA
±10
μA
1.3
3.1
V
S
Continued on next page.
www.onsemi.com
Publication Order Number:
EFC4612R/D
EFC4612R
Continued from preceding page.
Parameter
Symbol
RSS(on)1
Ratings
Conditions
min
typ
max
Unit
IS=3A, VGS=4.5V
IS=3A, VGS=4.0V
Test Circuit 5
24
39
45
mΩ
RSS(on)2
Test Circuit 5
25
41
48
mΩ
RSS(on)3
IS=3A, VGS=3.7V
Test Circuit 5
27.5
43
50
mΩ
RSS(on)4
IS=3A, VGS=3.1V
Test Circuit 5
31.5
48
57
mΩ
RSS(on)5
IS=3A, VGS=2.5V
Test Circuit 5
33.5
58
72
mΩ
Turn-ON Delay Time
td(on)
See specified Test Circuit.
Test Circuit 7
20
ns
Rise Time
tr
See specified Test Circuit.
Test Circuit 7
230
ns
Turn-OFF Delay Time
td(off)
See specified Test Circuit.
Test Circuit 7
130
ns
Fall Time
tf
See specified Test Circuit.
Test Circuit 7
210
ns
Total Gate Charge
Qg
VSS=10V, VGS=4.5V, IS=6A
7
nC
Forward Source-to-Source Voltage
VF(S-S)
IS=3A, VGS=0V
Static Source-to-Source On-State Resistance
Package Dimensions
0.8
Test Circuit 6
1.2
V
Electrical Connection
unit : mm (typ)
7064-001
1
1.26
4
3
Rg
1.26
2
Rg
2
3
0.15
0.22
1
Rg=200Ω
0.65
2
1 : Source1
2 : Gate1
3 : Gate2
4 : Source2
0.65
1
4
3
0.3
SANYO : EFCP1313-4CC-037
Rev. 0 | Page 2 of 5 | www.onsemi.com
4
1 : Source1
2 : Gate1
3 : Gate2
4 : Source2
EFC4612R
Test circuits are example of measuring FET1 side
Test Circuit 1
VSSS / ISSS
Test Circuit 2
IGSS(+) / (--)
S2
S2
G2
G2
G1
G1
S1
S1
IT11565
Test Circuit 3
VGS(off)
IT11566
Test Circuit 4
| yfs |
S2
S2
G2
G2
10V 1mA
G1
G1
S1
S1
IT11567
Test Circuit 5
RSS(on)
IT11568
Test Circuit 6
VF(S-S)
S2
S2
4.5V
G2
G2
G1
G1
S1
S1
IT11569
IT11570
Test Circuit 7
td(on), tr, td(off), tf
VDD=10V
IS=3A
RL=3.33Ω
V
S2 OUT
VIN
G2
PW=10μs
D.C.≤1%
G1
S1
* Note: Connect the mesurement terminal reversely
if you want to measure the FET2 side.
Rev. 0 | Page 3 of 5 | www.onsemi.com
EFC4612R
IS -- VSS
VSS=10V
5
3.5
V SS=1.5V
3.0
2.5
2.0
1.5
4
3
2
1
1.0
0.5
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
Source-to-Source Voltage, VSS -- V
Static Source-to-Source
On-State Resistance, RSS(on) -- mΩ
100
80
60
40
20
0
2
4
6
8
IS -- VF(S-S)
0.01
0
0.2
0.4
0.6
0.8
1.0
Forward Source-to-Source Voltage, VF(S-S) -- V
VGS -- Qg
2.5
2.0
1.5
1.0
0.5
1
2
3
4
3A
.0V, I S=
V GS=4
--40 --20
0
20
40
5
6
Total Gate Charge, Qg -- nC
7
60
80
100
120
140
5
160
IT14683
SW Time -- IS
VSS=10V
VGS=4.5V
3
td(off)
2
tf
100
7
tr
5
3
td(on)
2
2
3
5 7 0.1
2
3
2
5 7 1.0
3
100
7
5
3
2
10
7
5
3
2
ISP=60A
PW≤10μs
10
0μ
s
1m
s
IS=6A
1.0
7
5
3
2
0.1
7
5
3
2
5 7 10
IT14685
ASO
2
3.0
0
20
Source Current, IS -- A
3.5
0
40
IT14684
VSS=10V
IS=6A
4.0
60
10
0.01
1.2
Source Current, IS -- A
Gate-to-Source Voltage, VGS -- V
4.5
=3A
V, I S
=2.5
=3A
S
VG
V, I S
=3.1
VGS
A
, I S=3
=4.5V
VGS
Ambient Temperature, Ta -- °C
Switching Time, SW Time -- ns
Ta=7
5°C
25°C
--25°C
Source Current, IS -- A
3
2
3
2
=3.7
VGS
80
7
1.0
7
5
2.0
IT14681
=3A
V, I S
100
1000
3
2
1.5
120
IT14682
VGS=0V
0.1
7
5
1.0
RSS(on) -- Ta
0
--60
10
Gate-to-Source Voltage, VGS -- V
10
7
5
0.5
Gate-to-Source Voltage, VGS -- V
140
Ta=25°C
IS=3A
120
0
0
IT14720
RSS(on) -- VGS
140
0
2.0
Static Source-to-Source
On-State Resistance, RSS(on) -- mΩ
0
25°C --25°C
4.0
Ta=7
5°C
4.5
Source Current, IS -- A
Source Current, IS -- A
5.0
4.0V 3.1V
5.5
IS -- VGS
6
2.5V
10.0V 4.5V
6.0
10
ms
1
DC 00m
op s
era
tio
n
Operation in this area
is limited by RSS(on).
Ta=25°C
Single pulse
When mounted on ceramic substrate (5000mm2×0.8mm)
0.01
0.01
IT14686
Rev. 0 | Page 4 of 5 | www.onsemi.com
2 3
5 7 0.1
2 3
5 7 1.0
2 3
5 7 10
Source-to-Source Voltage, VSS -- V
2 3
5
IT14721
EFC4612R
PT -- Ta
1.8
When mounted on ceramic substrate
(5000mm2×0.8mm)
Total Dissipation, PT -- W
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
0
20
40
60
80
100
120
Ambient Temperature, Ta -- °C
140
160
IT14722
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any
products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of
the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. SCILLC strives to supply
high-quality high-reliability products and recommends adopting safety measures when designing equipment to avoid accidents or malfunctions. Such measures include but are not limited to
protective circuits and error prevention circuits for safe design, redundant design, and structural design. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications
can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals,” must be validated for each customer application by customer’s
technical experts. SCILLC shall not be held liable for any claim or suits with regard to a third party’s intellectual property rights which has resulted from the use of the technical information and
products mentioned above. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components
in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create
a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part.
SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800-282-9855 Toll Free
USA/Canada.
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81-3-5773-3850
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
EFC4612R/D
Similar pages