ETC2 HA1EV2S1R L6 series miniature switches and pilot device Datasheet

Switches & Pilot Devices
ø16mm - L6 Series
L6 Series — Miniature Switches and Pilot Devices
Switches & Pilot Lights
Key features of the 5/8” L6 Series include:
•
•
•
•
•
•
•
5/8” (16mm) mounting holes
Locking lever removable contact blocks
Solder terminal or PCB terminal options
Available assembled or as sub-components
Worldwide approvals
Incandescent or LED illumination
Snap action contacts
CSA Certified
File No. LR21451
Display Lights
UL Recognized
File No. E55996
Conforming to Standards
EN60947-1, EN60947-5-1, VDE0660-200, UL508, CSA C22-2 N0.14
Operating Temperature
Operation: –25 to +55°C (without freezing), 45 to 85% RH
Storage: -30 to +80°C (without freezing)
Vibration Resistance
5 to 55Hz, 1.0 peak-peak amplitude max
Shock Resistance
Operating limit: 100 m/sec2 (approximately 10G)
Damage limit: 1000 m/sec2 (approximately 100G)
Mechanical Life
Momentary pushbuttons 2,000,000 operations minimum
All others: 250,000 operations minimum
IP65 (conforming to IEC 60529)
Dielectric Strength
Switch unit: between live and ground: 2500 volt AC, 1 minute
between terminals of different poles: 2500 volt AC, 1 minute
between terminals of same pole: 1000 volt AC, 1 minute
Illumination unit: between live part and ground: 2500 volt AC, 1 minute
Insulation Resistance
100MΩ minimum (using 500V DC megger)
Rated Insulation Voltage
250V AC/DC
Rated Thermal Current
Gold Contacts (pcb): 3A
Silver Contacts (solder): 5A
Contact Resistance
50Ω maximum initial value
Silver Contacts
(Solder Terminals)
30V
125V
250V
—
5A
2A
—
2A
1.5A
3A
0.4A
—
1A
0.2A
—
Minimum Recommended Load (reference value for silver
contacts)
5V AC/DC, 1mA
Terminal Style
0.110” Solder Tab /PCB
Contact Form
Snap Action, Double Throw
Gold Clad Contacts
(PCB terminals)
30V
125V
AC inductive
0.1A
DC resistive
0.1A
—
Solder Tab: Pure Silver /PCB: Gold Plated Silver
Electrical Life (at full load)
Momentary pushbuttons: 100,000 operations minimum (1800 operations / hour)
All others: 100,000 operations minimum (1200 operations / hour)
Lamp Current Draw
5V DC LED: 8mA
6V AC/DC LED: 7mA
12V AC/DC LED: 8mA
24V AC/DC LED: 8mA
120V AC = 8mA
Lamp Life
Incandescent: 2000 hours./LED 50,000 hours. (on pure DC, half-life intensity)
USA: 800-262-IDEC
Circuit Breakers
Contact Material
Terminal Blocks
AC resistive
AC inductive
DC resistive
DC inductive
Timers
Degree of Protection
Rated Operating Current
Lamp Ratings
Relays & Sockets
Contact Ratings
Registration No. R9551089 (E-stops)
Registration No. J9551458 (all other switches)
Registration No. R95650511 (Pilot Lights)
6V AC/DC incandescent: 100 mA
12V AC/DC incandescent: 50 mA
24V AC/DC incandescent: 25 mA
Canada: 888-317-IDEC
471
Switches & Pilot Devices
ø16mm - L6 Series
Switches & Pilot Lights
Built-in LED Lamp Ratings
Model
LFTD-5k
LFTD-1k
5V DC
12V AC/DC
Lamp Base
Display Lights
LFTD-H2k
SX6S/8x5.4
Rated Voltage
Operating Voltage
Current Draw
24V AC/DC
120V AC
5V DC ±5%
12V AC/DC ±10%
24V AC/DC ±10%
120V AC ±5%
AC
—
9mA
9mA
8mA
DC
8mA
8mA
8mA
—
Color Code k
Specify a color code in place of k in the Part No: A (amber), G (green), R (red), S (blue), W (white), Y (yellow)
Lamp Base Color
Same as illumination color
Voltage Marking
Stamped on the lamp base
Life (reference value)
Approx. 50,000 hours
A, R, W, Y
(+)
A, R, W, Y
(–)
LED Chip
Internal Circuit
G, S
(+)
Relays & Sockets
LFTD-2k
Protection Diode
G, S
Zener Diode
(–)
Non-Illuminated Pushbuttons (Assembled)
Non-Illuminated Pushbuttons
Style
Operation
Round
Momentary
Maintained
Square
Timers
Momentary
Maintained
Rectangular
Momentary
Maintained
Terminal Blocks
Oversize Round Flush
Momentary
Maintained
Contact
Terminal Style
Solder Tab
PCB
SPDT
LA1B-M1C5-j
LA1B-M1C1V-j
DPDT
LA1B-M1C6-j
LA1B-M1C2V-j
SPDT
LA1B-A1C5-j
LA1B-A1C1V-j
DPDT
LA1B-A1C6-j
LA1B-A1C2V-j
SPDT
LA2B-M1C5-j
LA2B-M1C1V-j
DPDT
LA2B-M1C6-j
LA2B-M1C2V-j
SPDT
LA2B-A1C5-j
LA2B-A1C1V-j
DPDT
LA2B-A1C6-j
LA2B-A1C2V-j
SPDT
LA3B-M1C5-j
LA3B-M1C1V-j
DPDT
LA3B-M1C6-j
LA3B-M1C2V-j
SPDT
LA3B-A1C5-j
LA3B-A1C1V-j
DPDT
LA3B-A1C6-j
LA3B-A1C2V-j
SPDT
HA1B-M1C5-j
HA1B-M1C1V-j
DPDT
HA1B-M1C6-j
HA1B-M1C2V-j
SPDT
HA1B-A1C5-j
HA1B-A1C1V-j
DPDT
HA1B-A1C6-j
HA1B-A1C2V-j
Style
Oversize Round
Extended
Operation
Momentary
Maintained
Oversize Square Flush
Momentary
Maintained
Oversize Square
Extended
Momentary
Maintained
Mushroom
Momentary
Maintained
Circuit Breakers
1. In place of j specify Button Color Code from table.
2. Illuminated (translucent) style lenses also available, specify as such: instead of LA1B-M1C5-j use LA1B-M1C5L-k in place of k
(specify Lens Color Code from next page.)
3. PCB terminal models also available with silver contacts (change “1” or “2” to “5” or “6” respectively, ie LA1B-M1C1V-j becomes
LA1B-M1C5V-j).
jButton Color Codes
472
Color
Code
Color
Code
Black
B
Blue
S
Green
G
White
W
Red
R
Yellow
Y
www.idec.com
Contact
Terminal Style
Solder Tab
PCB
HA1B-M2C5-j
HA1B-M2C1V-j
DPDT
HA1B-M2C6-j
HA1B-M2C2V-j
SPDT
HA1B-A2C5-j
HA1B-A2C1V-j
DPDT
HA1B-A2C6-j
HA1B-A2C2V-j
SPDT
HA2B-M1C5-j
HA2B-M1C1V-j
DPDT
HA2B-M1C6-j
HA2B-M1C2V-j
SPDT
HA2B-A1C5-j
HA2B-A1C1V-j
DPDT
HA2B-A1C6-j
HA2B-A1C2V-j
SPDT
HA2B-M2C5-j
HA2B-M2C1V-j
DPDT
HA2B-M2C6-j
HA2B-M2C2V-j
SPDT
HA2B-A2C5-j
HA2B-A2C1V-j
DPDT
HA2B-A2C6-j
HA2B-A2C2V-j
SPDT
HA1B-M3C5-j
HA1B-M3C1V-j
DPDT
HA1B-M3C6-j
HA1B-M3C2V-j
SPDT
HA1B-A3C5-j
HA1B-A3C1V-j
DPDT
HA1B-A3C6-j
HA1B-A3C2V-j
SPDT
Switches & Pilot Devices
ø16mm - L6 Series
Non-Illuminated Pushbuttons (Sub-Assembled)
Operators
Style
+
Operator
+
Button
Buttons/Lenses
Momentary
Maintained
Style
Contacts
Button
LA1L-AO
Square
Terminal Style
Lens
Appearance
Round
LA1L-MO
Complete Part
AB6M-BK2-j
AL6M-LK2-k
AB6Q-BK2-j
AL6Q-LK2-k
Contacts
Solder
Tab
PCB
SPDT
DPDT
HA-C1
HA-C2
HA-C1V
HA-C2V
SPDT
DPDT
HA-C5
HA-C6
HA-C5V
HA-C6V
Display Lights
Round
=
Gold
Safety Lever Lock
Silver
+
Switches & Pilot Lights
Contact
Square
LA2L-MO
LA2L-AO
Rectangular
Safety Lever Lock
Appearance
LA3L-MO
LA3L-AO
Relays & Sockets
Rectangular
AB6H-BK2-j
Part Number
AL6H-LK2-k
HA9Z-LS
Oversize Round
Oversize Round
Flush
HA1B-MO
HA1B-AO
j Button Color Code
HA1A-B1-j
HA1A-L1-k*
HA2B-MO
HA2B-AO
Oversize Round
Extended
HA1A-B2-j
–
Mushroom
Code
Black
B
Green
G
Red
R
Blue
S
White
W
Yellow
Y
Timers
Oversize Square
Color
k Lens Color Code
HA1B-A0L
HA2A-B1-j
1. In place of j specify Button Color Code from table
on right.
2. In place of k specify Lens Color Code from table
on right.
3. *requires HA1L-M0 or HA1L-A0 operator instead
of HA1B-M0 or HA1B-A0.
4. **requires HA2L-M0 or HA2L-A0 instead of
HA2B-M0 or HA2B-A0.
HA2A-L1-k**
Oversize Square
Extended
–
HA1A-B3-j
HA1A-L3-k
Code
Amber
A
Green
G
Red
R
Blue
S
Yellow
Y
White
W
Circuit Breakers
HA2A-B2-j
Color
Terminal Blocks
HA1B-MOL
Oversize Square
Flush
Mushroom
USA: 800-262-IDEC
Canada: 888-317-IDEC
473
Switches & Pilot Devices
ø16mm - L6 Series
Switches & Pilot Devices
HA1B/HA1E Stop Switch
Key features:
PCB or Solder Terminals
Locking Lever Removable Contact Blocks
Positive Action Contacts
1 or 2 form B (SPST-NC) Contacts
IP65 Protection
16mm Mounting Hole
Tamper Proof Construction
CSA
File No. LR21451
File No. DK95-00138
UL Recognized
File No. E55996
Specifications
Nameplates
PCB or Solder Terminal
Contact Material
Silver
Applicable Standards
EN60947-5-1, UL508, CSA 22.2. No. 14
Rated Insulation Voltage
250V AC/DC
Degree of Protection
IP65
Conditional Short-Circuit Current and
Short-Circuit Protective Device
50 A (at 250V) 10A 250V Fuse, operation
class M according to IEC269-1 and IEC269-2
Positive opening travel
HAAV–Yellow Plastic
ø43mm
1 or 2 form B (SPST-NC)
Termination
3.4mm
10.3 N (2 form B contacts)
Maximum travel including travel beyond the
minimum travel position
5.5mm
Maximum frequency of actuation
1,200 operations/hour
Pollution Degree
Marking
Part Number
Blank
HAAV-0
Timers
Minimum force required to achieve positive
opening operation of all break contacts.
Relays & Sockets
Contact Form
Positive
Opening
Operation
Direct
Opening
Action
Signaling Lights
•
•
•
•
•
•
•
3
Positive Action Stop Switch
Style
Accessories: Shroud
Operation
Pushlock/
Turn Reset
Contact
DPST(NC) (2 form B)
Short Body
SPST-NC (1 form B)
DPST-NC (2 form B)
Solder Tab
PCB
HA1B-V2E2R
HA1BV2E2VR
HA1E-V2S1R
HA1E-V2S2R
—
Style
Part Number
Applicable Standards
XA9Z-KG1
SEMI S2 Compliant
(Approved by TUV)
Contactors
Stop
Switch
Terminal Style
1. Button is non-removable, available in red and as complete assembled unit only.
2. Stop Switch does not come with safety lever lock.
Buzzer Ratings
Terminal Style
Operating Voltage
6V AC/DC ± 10%
12V to 24 AC/DC ± 10%
Solder/
Tab
LA3Z-1X2
LA3Z-1X4
PCB
LA3Z-1X2V
LA3Z-1X4V
800-262-IDEC (4332) • USA & Canada
Frequency 2 khz ± 500 HZ
Amplitude
80db @ 0.1m (at rated voltage)
Operating Voltage
6V AC/DC or 12 - 24V AC/DC ± 10%
Adjustable Cycle
55 to 600 cycles per minute
Current Draw
DC: 7mA
AC: 20mA
Life
1000 hrs. minimum
Insulation Voltage
60V AC/DC
Operating Temperature
-20 to 55ºC (no freezing), 45 to 85%
RH
Degree of Protection
IP40
Circuit Breakers
Buzzer-Rectangular
Style
Terminal Blocks
Buzzers (IP40)
505
Switches & Pilot Devices
ø16mm - L6 Series
Pilot Lights (Assembled)
Switches & Pilot Lights
Pilot Lights
kLens/LED Color Codes
Style
Terminal Style
Solder Tab
PCB
Round
LA1P-1C0l-k
LA1P-1C0lV-k
Color
Code
Amber
A
Green
G
Red
R
Blue
S
White
W
Yellow
Y
Display Lights
lVoltage/Lamp Code
Square
Voltage
LA2P-1C0l-k
LA2P-1C0lV-k
Rectangular
LA3P-1C0lV-k
HA1P-1C0l-k
HA1P-1C0lV-k
HA2P-1C0l-k
HA2P-1C0lV-k
HA1P-1l-k
—
1
6V AC/DC LED
2
12V AC/DC LED
3
24V AC/DC LED
4
120V AC LED
8
6V AC/DC Incandescent
5
12V AC/DC Incandescent
6
24V AC/DC Incandescent
7
Relays & Sockets
LA3P-1C0l-k
Code
5V DC LED
Oversize Round
Timers
Oversize Square
Terminal Blocks
Oversize Round Unibody
Oversize Square Unibody
—
USA: 800-262-IDEC
Canada: 888-317-IDEC
475
Circuit Breakers
HA2P-1l-k
1. In place of k specify Lens/LED Color Code
from table.
2. In place of l specify Voltage Code from
table.
3. Lamps also available in 5VDC, 6V AC/DC, 12V
AC/DC or 120V AC, change “4” or “7” using
Voltage/Lamp Codes (ie LA1P-1C03-k uses
12V AC/DC LED).
4. Light independent of switch position.
Switches & Pilot Devices
ø16mm - L6 Series
Switches & Pilot Lights
Pilot Lights (Sub-Assembled)
Terminals
+
Safety Lever Lock
Operators
+
Lamp Holder
+
Lamp
+
Lenses
Style
Part Number
Display Lights
Round
+
Lens
=
Completed Unit
Lamps
Style
Part Number
Round
Style
LED
AL6M-LK3-k
LA1P-0
Voltage
Part Number
5V DC
6V AC/DC
12V AC/DC
24V AC/DC
120 V AC
LFTD-5k
LFTD-6k
LFTD-1k
LFTD-2k
LFTD-H2k
6V AC/DC
12V AC/DC
24V AC/DC
LH-06
LH-14
LH-28
Incandescent
Square
Square
Operator
AL6Q-LK3-k
Relays & Sockets
LA2P-0
In place of k specify LED color code from table below.
Rectangular
Rectangular
AL6H-LK3-k
Terminals
Appearance
LA3P-0
Solder Tab
PCB
HA-C00
HA-C00V
Oversize Round
Oversize Round
HA1A-P1-k
HA1P-0
Not required for unibody operators.
Timers
Oversize Square
Oversize Square
HA2A-P1-k
Lamp Holder
Appearance
Part Number
HA2P-0
HA9Z-AH
Terminal Blocks
In place of k specify lens color code.
Oversize Round Unibody
Safety Lever Lock
Appearance
Part Number
HA1P-00
HA9Z-LS
Oversize Square Unibody
k Lens/LED Color Codes
Circuit Breakers
HA2P-00
476
www.idec.com
Color
Code
Amber
A
Green
G
Red
R
Blue
S
Yellow
Y
White
W
Switches & Pilot Devices
ø16mm - L6 Series
Illuminated Pushbuttons (Assembled)
Style
Switches & Pilot Lights
Illuminated Pushbuttons
kLens Color Codes
Operation
Round
Momentary
Contact
SPDT
DPDT
Terminal Style
Solder Tab
PCB
LA1L-M1C5l-k
LA1L-M1C6l-k
LA1L-M1C1lV-k
LA1L-M1C2lV-k
SPDT
DPDT
LA1L-A1C5l-k
LA1L-A1C6l-k
LA1L-A1C1lV-k
LA1L-A1C2lV-k
Momentary
SPDT
DPDT
LA2L-M1C5l-k
LA2L-M1C6l-k
LA2L-M1C1lV-k
LA2L-M1C2lV-k
Square
Maintained
Rectangular
Momentary
SPDT
DPDT
LA3L-M1C5l-k
LA3L-M1C6l-k
LA2L-A1C1lV-k
LA2L-A1C2lV-k
LA3L-M1C1lV-k
LA3L-M1C2lV-k
LA3L-A1C5l-k
LA3L-A1C6l-k
LA3L-A1C1lV-k
LA3L-A1C2lV-k
Momentary
SPDT
DPDT
HA1L-M1C5l-k
HA1L-M1C6l-k
HA1L-M1C1lV-k
HA1L-M1C2lV-k
Maintained
SPDT
DPDT
HA1L-A1C5l-k
HA1L-A1C6l-k
HA1L-A1C1lV-k
HA1L-A1C2lV-k
Momentary
SPDT
DPDT
HA2L-M1C5l-k
HA2L-M1C6l-k
HA2L-M1C1lV-k
HA2L-M1C2lV-k
Maintained
SPDT
DPDT
HA2L-A1C5l-k
HA2L-A1C6l-k
HA2L-A1C1lV-k
HA2L-A1C2lV-k
Momentary
SPDT
DPDT
HA1L-M3C5l-k
HA1L-M3C6l-k
HA1L-M3C1lV-k
HA1L-M3C2lV-k
Maintained
SPDT
DPDT
HA1L-A3C5l-k
HA1L-A3C6l-k
HA1L-A3C1lV-k
HA1L-A3C2lV-k
Oversize Round
Oversize Square
Mushroom
G
Red
R
Blue
S
Yellow
Y
White
W
lVoltage/Lamp Code
Voltage
Code
5V DC LED
1
6V AC/DC LED
2
12V AC/DC LED
3
24V AC/DC LED
4
120 V AC LED
8
6V AC/DC Incandescent
5
12V AC/DC Incandescent
6
24V AC/DC Incandescent
7
Terminal Blocks
SPDT
DPDT
Green
Timers
Maintained
A
Relays & Sockets
SPDT
DPDT
LA2L-A1C5l-k
LA2L-A1C6l-k
Code
Display Lights
Maintained
Color
Amber
USA: 800-262-IDEC
Canada: 888-317-IDEC
477
Circuit Breakers
1. In place of k specify Lens Color Code from
table.
2. In place of l specify Voltage Code from
table.
3. Lamps also available in 5V DC, 6V AC/DC,
12V AC/DC or 120V AC, change “4” or “7”
using voltage/lamp codes (ie LA1P-1C03-k
uses 12V AC/DC LED).
4. PCB terminal models also available with
silver contacts change “1” or “2” to “5” or “6”
respectively, (ie LA1L-M1C14V-j becomes
LA1L-M1C54V-j).
5. Light independent of switch position.
Switches & Pilot Devices
ø16mm - L6 Series
Switches & Pilot Lights
Illuminated Pushbuttons (Sub-Assembled)
Terminals
+
Safety Lever Lock
+
Operators
+
Lamp
+
Lenses
Style
Display Lights
Lamp Holder
Momentary
Maintained
LA1L-MO
+
Lens
=
Completed Unit
Lamps
Style
Part Number
Style
LED
Round
Round
Operator
LA1L-AO
AL6M-LK2-k
Voltage
Part Number
5V DC
6V AC/DC
12V AC/DC
24V AC/DC
120 V AC
LFTD-5k
LFTD-6k
LFTD-1k
LFTD-2k
LFTD-H2k
6V AC/DC
12V AC/DC
24V AC/DC
LH-06
LH-14
LH-28
Incandescent
Square
Square
LA2L-AO
AL6Q-LK2-k
Contacts
LA3L-MO
LA3L-AO
Contacts
Solder
Tab
PCB
Gold
Terminal Style
Rectangular
Rectangular
SPDT
DPDT
HA-C10
HA-C20
HA-C10V
HA-C20V
Silver
Relays & Sockets
LA2L-MO
Appearance
SPDT
DPDT
HA-C50
HA-C60
HA-C50V
HA-C60V
AL6H-LK2-k
Oversize Round
Oversize Round
Timers
HA1L-MO
HA1L-A0
HA1A-L1-k
Lamp Holder
Oversize Square
HA2L-MO
Terminal Blocks
Appearance
Oversize Square
HA2L-AO
Part Number
HA9Z-AH
HA2A-L1-k
Safety Lever Lock
Mushroom
Mushroom
HA1B-MOL
Appearance
HA1B-AOL
HA1A-L3-k
Circuit Breakers
k Lens/LED Color Codes
478
Color
Code
Amber
A
Green
G
Red
R
Blue
S
Yellow
Y
White
W
In place of k specify lens color code.
www.idec.com
Part Number
HA9Z-LS
Switches & Pilot Devices
ø16mm - L6 Series
Selector Switches (Assembled)
Contact Operations
Position
90˚ 2 -Position
Style
Round
Maintained
Spring return
from right
Contact
L
L
Terminal Style
Solder Tab
PCB
R
DPDT
LA1S-2C6
LA1S-2C2V
R
DPDT
LA1S-21C6
LA1S-21C2V
L
R
DPDT
LA1S-3C6
LA1S-3C2V
Spring return
from right
L
R
DPDT
LA1S-31C6
LA1S-31C2V
Left
2-Way spring
return
L
R
DPDT
LA1S-32C6
LA1S-32C2V
R
DPDT
LA1S-33C6
LA1S-33C2V
R
DPDT
LA2S-2C6
LA2S-2C2V
Left
C
45˚ 3-Position
C
L
Spring return
from right
L
Maintained
L
Spring return
from right
L
Spring return
from left
L
2-Way spring
return
R
DPDT
LA2S-21C6
LA2S-21C2V
R
DPDT
LA2S-3C6
LA2S-3C2V
R
DPDT
LA2S-31C6
LA2S-31C2V
R
DPDT
LA2S-32C6
LA2S-32C2V
L
R
DPDT
LA2S-33C6
LA2S-33C2V
L
R
DPDT
LA3S-2C6
LA3S-2C2V
Spring return
from right
L
R
DPDT
LA3S-21C6
LA3S-21C2V
Maintained
L
R
DPDT
LA3S-3C6
LA3S-3C2V
Spring return
from right
L
R
DPDT
LA3S-31C6
LA3S-31C2V
Spring return
from left
L
R
DPDT
LA3S-32C6
LA3S-32C2V
2-Way spring
return
L
R
DPDT
LA3S-33C6
LA3S-33C2V
L
R
DPDT
HA1S-2C6
HA1S-2C2V
Spring return
from right
L
R
DPDT
HA1S-21C6
HA1S-21C2V
Maintained
L
R
DPDT
HA1S-3C6
HA1S-3C2V
Spring return
from right
L
R
DPDT
HA1S-31C6
HA1S-31C2V
Spring return
from left
L
R
DPDT
HA1S-32C6
HA1S-32C2V
2-Way spring
return
L
R
DPDT
HA1S-33C6
HA1S-33C2V
C
Left
Right
Contact Contact
NO NC NO NC
C
3-pos.
(DPDT)
Center
C
Left
Right
Contact Contact
NO NC NO NC
C
Right
C
Left
Right
Contact Contact
NO NC NO NC
C
C
As viewed from front of switch.
C
Timers
90˚ 2 -Position
Left
Right
Contact Contact
NO NC NO NC
C
C
Rectangular
C
C
L
Maintained
Left
Right
Contact Contact
NO NC NO NC
C
2-pos.
(DPDT)
Right
Spring return
from left
Maintained
Operator Position and
Contact Operation
Contacts
Relays & Sockets
90˚ 2 -Position
Maintained
(for all selectors)
Display Lights
45˚ 3-Position
C
Square
Switches & Pilot Lights
Selector Switches
Maintained
C
Terminal Blocks
C
C
C
C
USA: 800-262-IDEC
Canada: 888-317-IDEC
1. All assembled selector switches use DPDT
contacts.
2. For SPDT contacts see sub-components on
next page.
3. PCB terminal models also available with
silver contacts change “1” or “2” to “5” or
“6” respectively, (ie LA1S-21C2V becomes
LA1S-21C6V).
Circuit Breakers
45˚ 3-Position
Oversize Round
90˚ 2 -Position
45˚ 3-Position
C
479
Switches & Pilot Devices
ø16mm - L6 Series
Switches & Pilot Lights
Selector Switches (Sub-Assembled)
Contact
+
Safety Lever Lock
+
Operator
Operators
Rectangular
Part Number
Maintained
Spring from right
LA1S-21Y
3
Maintained
Spring from right
Spring from left
Spring from both
LA1S-3Y
LA1S-31Y
LA1S-32Y
LA1S-33Y
2
Maintained
Spring from right
LA2S-2Y
LA2S-21Y
3
Maintained
Spring from right
Spring from left
Spring from both
LA2S-3Y
LA2S-31Y
LA2S-32Y
LA2S-33Y
2
Maintained
Spring from right
LA3S-2Y
LA3S-21Y
3
Maintained
Spring from right
Spring from left
Spring from both
LA3S-3Y
LA3S-31Y
LA3S-32Y
LA3S-33Y
2
Maintained
Spring from right
HA1S-2Y
HA1S-21Y
3
Maintained
Spring from right
Spring from left
Spring from both
HA1S-3Y
HA1S-31Y
HA1S-32Y
HA1S-33Y
Terminal Blocks
Circuit Breakers
480
LA1S-2Y
www.idec.com
Terminal Style
Contacts
Solder
Tab
PCB
Gold
Function
2
Timers
Oversize Round
Position
SPDT
DPDT
HA-C1
HA-C2
HA-C1V
HA-C2V
Silver
Display Lights
Relays & Sockets
Square
Complete Part
Contacts
Style
Round
=
Appearance
SPDT
DPDT
HA-C5
HA-C6
HA-C5V
HA-C6V
1. All assembled switches listed on previous page
use DPDT contacts.
2. SPDT Contacts for use on 2 position selector
switch only
Safety Lever Lock
Appearance
Part Number
HA9Z-LS
Switches & Pilot Devices
ø16mm - L6 Series
Key Switches (Assembled)
Contact Operations
Position
90˚ 2 -Position
Style
Round
Maintained
Spring return
from right
Contact
L
R
L
R
Terminal Style
Solder Tab
PCB
DPDT
LA1K-2C6l
LA1K-2C2Vl
DPDT
LA1K-21C6B
LA1K-21C2VB
L
Spring return
from right
L
DPDT
LA1K-3C6l
LA1K-3C2Vl
R
DPDT
LA1K-31C6l
LA1K-31C2Vl
Left
Right
2-Way spring
return
L
R
DPDT
LA1K-32C6l
LA1K-32C2Vl
R
DPDT
LA1K-33C6D
LA1K-33C2VD
R
DPDT
LA2K-2C6l
LA2K-2C2Vl
Spring return
from right
L
Maintained
L
Left
R
DPDT
LA2K-21C6B
LA2K-21C2VB
R
DPDT
LA2K-3C6l
LA2K-3C2Vl
R
DPDT
LA2K-31C6l
LA2K-31C2Vl
R
DPDT
LA2K-32C6l
LA2K-32C2Vl
C
3-pos.
(DPDT)
Center
45˚ 3-Position
Spring return
from left
L
2-Way spring
return
L
R
DPDT
LA2K-33C6D
LA2K-33C2VD
L
R
DPDT
LA3K-2C6l
LA3K-2C2Vl
R
DPDT
LA3K-21C6B
LA3K-21C2VB
R
DPDT
LA3K-3C6l
LA3K-3C2Vl
45˚ 3-Position
Spring return
from left
90˚ 2 -Position
As viewed from front of switch.
C
L
L
C
L
R
DPDT
LA3K-31C6l
R
DPDT
LA3K-32C6l
Code
A
B
Key retained in right position only
C
Key retained in left position only
D
Key retained in left and right
(3 position only)
E
Key retained in center only
(3 position only)
G
Key retained right and center
(3 position only)
H
Key retained left and center
(3 position only)
LA3K-32C2Vl
C
L
L
Spring return
from right
L
Maintained
L
Spring return
from right
L
DPDT
LA3K-33C6D
LA3K-33C2VD
DPDT
HA1K-2C6l
HA1K-2C2Vl
R
DPDT
HA1K-21C6B
HA1K-21C2VB
R
DPDT
HA1K-3C6l
HA1K-3C2Vl
R
DPDT
HA1K-31C6l
HA1K-31C2Vl
R
DPDT
HA1K-32C6l
HA1K-32C2Vl
R
DPDT
HA1K-33C6D
HA1K-33C2VD
R
R
Description
Key not retained in any position
(removable in all positions)
LA3K-31C2Vl
C
L
l Key Retention Option Codes
Key cannot be removed from a
spring-return position.
C
C
C
Spring return
from left
L
2-Way spring
return
L
C
USA: 800-262-IDEC
Canada: 888-317-IDEC
1. In place of l specify Key Retention Code
from next page.
2. All assembled key switches have DPDT
contacts. For SPDT see sub-assembled on
next page.
3. PCB terminal models also available with
silver contacts change “1” or “2” to “5” or
“6” respectively, (ie LA1K-2C2Vl becomes
LA1K-2C6Vl).
Circuit Breakers
45˚ 3-Position
Oversize Round
Maintained
C
Terminal Blocks
2-Way spring
return
C
C
C
Spring return
from right
Left
Right
Contact Contact
NO NC NO NC
Timers
90˚ 2 -Position
L
Maintained
C
C
Spring return
from right
Spring return
from right
Right
C
Left
Right
Contact Contact
NO NC NO NC
C
C
Rectangular
C
Left
Right
Contact Contact
NO NC NO NC
C
L
C
Left
Right
Contact Contact
NO NC NO NC
C
C
L
Maintained
Left
Right
Contact Contact
NO NC NO NC
C
2-pos.
(DPDT)
C
Spring return
from left
Maintained
R
Operator Position and
Contact Operation
Contacts
Relays & Sockets
90˚ 2 -Position
Maintained
(for all selectors)
Display Lights
45˚ 3-Position
C
Square
Switches & Pilot Lights
Key Switches
481
Switches & Pilot Devices
ø16mm - L6 Series
Switches & Pilot Lights
Selector Switches (Sub-Assembled)
Contact
+
Safety Lever Lock
+
Operator
Relays & Sockets
Complete Part
Contacts
Position
Square
Function
Terminal Style
Part Number
2
Maintained
Spring from right
LA1K-2l
LA1K-21B
3
Maintained
Spring from right
Spring from left
Spring from both
LA1K-3l
LA1K-31l
LA1K-32l
LA1K-33D
2
Maintained
Spring from right
LA2K-2l
LA2K-21B
3
Maintained
Spring from right
Spring from left
Spring from both
LA2K-3l
LA2K-31l
LA2K-32l
LA2K-33D
Contacts
Solder
Tab
PCB
Gold
Style
Round
SPDT
DPDT
HA-C1
HA-C2
HA-C1V
HA-C2V
Silver
Display Lights
Operators
=
Appearance
SPDT
DPDT
HA-C5
HA-C6
HA-C5V
HA-C6V
1. All assembled switches listed on previous page
use DPDT contacts.
2. SPDT Contacts for use on 2 position selector
switch only
Safety Lever Lock
Appearance
Part Number
HA9Z-LS
Timers
Rectangular
2
LA3K-2l
LA3K-21B
l Key Retention Option Codes
Code
3
Terminal Blocks
Maintained
Spring from right
Oversize Round
2
Circuit Breakers
3
Maintained
Spring from right
Spring from left
Spring from both
Maintained
Spring from right
Maintained
Spring from right
Spring from left
Spring from both
LA3K-3l
LA3K-31l
LA3K-32l
LA3K-33D
HA1K-2l
HA1K-21B
HA1K-3l
HA1K-31l
HA1K-32l
HA1K-33D
1. In place of l specify key removable code from table on right.
2. Operator includes two keys.
482
www.idec.com
Description
A
Key not retained in any position
(removable in all positions)
B
Key retained in right position only
C
Key retained in left position only
D
Key retained in left and right
(3 position only)
E
Key retained in center only
(3 position only)
G
Key retained right and center
(3 position only)
H
Key retained left and center
(3 position only)
Key cannot be removed from a
spring-return position.
Switches & Pilot Devices
ø16mm - L6 Series
Illuminated Selector Switches (Assembled)
Round
Position
90˚ 2 -Position
Style
Maintained
Spring return
from right
Contact
Terminal Style
Solder Tab
PCB
L
R
DPDT
LA1F-2C6l-k
LA1F-2C2lV-k
L
R
DPDT
LA1F-21C6l-k
LA1F-21C2lV-k
90˚ 2 -Position
Maintained
L
Spring return
from right
L
DPDT
LA1F-3C6l-k
LA1F-3C2lV-k
R
DPDT
LA1F-31C6l-k
LA1F-31C2lV-k
Operator Position and
Contact Operation
Contacts
Left
Right
Contact Contact
NO NC NO NC
Left
C
2-pos.
(DPDT)
C
C
L
2-Way
spring return
R
DPDT
LA1F-32C6l-k
LA1F-32C2lV-k
L
R
DPDT
LA1F-33C6l-k
LA1F-33C2lV-k
L
R
DPDT
LA2F-2C6l-k
LA2F-2C2lV-k
R
DPDT
LA2F-21C6l-k
LA2F-21C2lV-k
R
DPDT
LA2F-3C6l-k
LA2F-3C2lV-k
R
DPDT
LA2F-31C6l-k
LA2F-31C2lV-k
R
DPDT
LA2F-32C6l-k
LA2F-32C2lV-k
Left
Maintained
L
Spring return
from right
L
Spring return
from left
L
2-Way
spring return
L
R
DPDT
LA2F-33C6l-k
LA2F-33C2lV-k
L
R
DPDT
LA3F-2C6l-k
LA3F-2C2lV-k
Left
Right
Contact Contact
NO NC NO NC
3-pos.
(DPDT)
Center
C
Left
Right
Contact Contact
NO NC NO NC
45˚ 3-Position
90˚ 2 -Position
Right
C
C
As viewed from front of switch.
C
C
L
C
DPDT
LA3F-21C6l-k
LA3F-21C2lV-k
R
DPDT
LA3F-3C6l-k
LA3F-3C2lV-k
R
DPDT
LA3F-31C6l-k
LA3F-31C2lV-k
R
k Lens/LED Color Codes
Color
Code
Color
Code
Amber
Green
A
Blue
S
G
Yellow
Y
Red
R
White
W
Timers
Spring return
from right
C
C
Relays & Sockets
L
C
C
Rectangular
C
Left
Right
Contact Contact
NO NC NO NC
C
Spring return
from right
Maintained
C
Left
Right
Contact Contact
NO NC NO NC
Right
C
Spring return
from left
Maintained
R
(for all selectors)
Display Lights
45˚ 3-Position
C
Square
Switches & Pilot Lights
Contact Operations
Illuminated Selector Switches
C
L
Spring return
from right
L
Spring return
from left
L
2-Way
spring return
L
Maintained
Spring return
from right
C
C
R
DPDT
LA3F-32C6l-k
LA3F-32C2lV-k
l Voltage/Lamp Code
Voltage
Code
5V DC LED
1
6V AC/DC LED
2
12V AC/DC LED
3
24V AC/DC LED
4
120V AC LED
8
6V AC/DC Incandescent
5
12V AC/DC Incandescent
6
24V AC/DC Incandescent
7
C
R
L
R
L
DPDT
DPDT
LA3F-33C6l-k
HA1F-2C6l-k
LA3F-33C2lV-k
HA1F-2C2lV-k
R
DPDT
HA1F-21C6l-k
HA1F-21C2lV-k
R
DPDT
HA1F-3C6l-k
HA1F-3C2lV-k
R
DPDT
HA1F-31C6l-k
HA1F-31C2lV-k
R
DPDT
HA1F-32C6l-k
HA1F-32C2lV-k
R
DPDT
HA1F-33C6l-k
HA1F-33C2lV-k
Terminal Blocks
C
Maintained
L
Spring return
from right
L
Spring return
from left
L
2-Way
spring return
L
C
C
C
USA: 800-262-IDEC
Canada: 888-317-IDEC
1. In place of k specify Lens/LED Color Code
from table above.
2. In place of l specify Voltage Code from
table above.
3. Lamps also available in 5V DC, 6V AC/DC, 12
V AC/DC or 120V AC, change “4” or “7” using
voltage/lamp codes (ie LA1F-2C63-k uses
12V AC/DC LED).
4. All switches listed have DPDT contacts. For
SPDT see sub-assembled on next page.
5. PCB terminal models also available with
silver contacts change “1” or “2” to “5” or
“6” respectively, (ie LA1F-2C24V-k becomes
LA1F-2C64V-k).
6. Light independent of switch position.
483
Circuit Breakers
45˚ 3-Position
Oversize Round
90˚ 2 -Position
45˚ 3-Position
Maintained
Switches & Pilot Devices
ø16mm - L6 Series
Illuminated Selector Switches (Sub-Assembled)
Switches & Pilot Lights
Contacts
+
Safety Lever Lock
+
Lamp Holder
+
Lamp
+
Operators
Display Lights
+
Lens/Handle
=
Completed Unit
Safety Lever Lock
Style
Position
Part Number
2
LA1F-20
LA1F-210
3
Maintained
Spring from right
Spring from left
Spring from both
LA1F-30
LA1F-310
LA1F-320
LA1F-330
2
Maintained
Spring from right
LA2F-20
LA2F-210
3
Maintained
Spring from right
Spring from left
Spring from both
LA2F-30
LA2F-310
LA2F-320
LA2F-330
2
Maintained
Spring from right
LA3F-20
LA3F-210
3
Maintained
Spring from right
Spring from left
Spring from both
LA3F-30
LA3F-310
LA3F-320
LA3F-330
2
Maintained
Spring from right
HA1F-20
HA1F-210
3
Maintained
Spring from right
Spring from left
Spring from both
HA1F-30
HA1F-310
HA1F-320
HA1F-330
Round
Rectangular
Timers
Oversize
Round
Function
Maintained
Spring from right
Square
Relays & Sockets
Operator
Appearance
Part Number
HA9Z-LS
Lamp Holder
Appearance
Part Number
HA9Z-AH
Lamps
Style
LED
Voltage
Part Number
5V DC
6V AC/DC
12V AC/DC
24V AC/DC
120V AC
LFTD-5k
LFTD-6k
LFTD-1k
LFTD-2k
LFTD-H2k
6V AC/DC
12V AC/DC
24V AC/DC
LH-06
LH-14
LH-28
Incandescent
In place of k specify LED color code from table below.
Contacts
Contacts
Terminal Blocks
Gold
Appearance
SPDT
DPDT
Terminal Style
Solder
Tab
HA-C10
HA-C20
PCB
HA-C10V
HA-C20V
k Lens/LED Color Codes
Lenses/Handles
Color
Code
Appearance
Amber
A
Green
G
Red
R
Blue
S
Part Number
Standard
Silver
LA1A-F-k
SPDT
DPDT
HA-C50
HA-C60
HA-C50V
HA-C60V
Oversize
Circuit Breakers
All assembled selectors on previous pages use DPDT
contacts. SPDT contacts are for use only on two position selectors.
HA1A-F-k
In place of k specify lens color code from table.
484
www.idec.com
Yellow
Y
White
W
Switches & Pilot Devices
ø16mm - L6 Series
Pushbutton Selectors (Assembled)
j Button Color Codes
Terminal Style
Style
2 Position
3 Position
Color
Code
Color
Code
Solder Tab
PCB
Amber
A
Blue
S
HA1R-2C6-j
HA1R-2C2V-j
Green
G
Yellow
Y
Red
R
White
W
HA1R-3C6-j
HA1R-3C2V-j
1. In place of j specify Button Color Code.
2. PCB terminal models also available with silver contacts (change “1” or “2” to “5” or “6”
respectively, ie HA1R-2C2V-j becomes HA1R-2C6V-j).
3. Pushed position, momentary only.
Contact Operation
Contacts
Operator Position and Contact Information
2 Position
Left
Center
Normal
Pushed
Left
Right
Contact Contact
NO NC NO NC
Right
Left
Contact Contact
NO NC NO NC
C
Left
Right
Contact Contact
NO NC NO NC
C
C
Normal
Pushed
Left
Right
Contact Contact
NO NC NO NC
Left
Right
Contact Contact
NO NC NO NC
—
2-pos.
(DPDT)
C
Left
Right
Contact Contact
NO NC NO NC
C
Left
Right
Contact Contact
NO NC NO NC
C
C
3-pos.
(DPDT)
Left
Right
Contact Contact
NO NC NO NC
Blocked
C
C
Spring Return
from Bottom
C
All models
C
C
C
Left
Right
Contact Contact
NO NC NO NC
C
C
C
Left
Right
Left
Right
Left
Right
Contact Contact Contact Contact Contact Contact
NO NC NO NC NO NC NO NC NO NC NO NC
C
C
C
C
Left
Right
Contact Contact
NO NC NO NC
C
C
Left
Right
Contact Contact
NO NC NO NC
C
C
Right
Pushed
—
C
C
Normal
Maintained
Spring from Top
Up
Left
Right
Contact Contact
NO NC NO NC
C
C
C
C
Relays & Sockets
3 Position
2-pos.
(DPDT)
Operator Position
Center
Left
Right
Contact Contact
NO NC NO NC
C
As viewed from front of switch.
C
Lever Switches
Style
Operation
Contacts
Display Lights
Down
Contact Operation
Style
Switches & Pilot Lights
Pushbutton Selectors
Terminal Type
Solder Tab
PCB
DPDT
LA1T-2C6
LA1T-2C2V
DPDT
LA1T-21C6
LA1T-21C2V
DPDT
LA1T-22C6
LA1T-22C2V
DPDT
LA1T-3C6
LA1T-3C2V
DPDT
LA1T-31C6
LA1T-31C2V
DPDT
LA1T-32C6
LA1T-32C2V
DPDT
LA1T-33C6
LA1T-33C2V
U
Maintained
Timers
2 -Position
D
U
Spring return from top
D
U
Spring return from bottom
D
U
Maintained
C
Terminal Blocks
D
3-Position
U
Spring return from top
C
D
U
Spring return from bottom
C
D
U
Spring return from both
C
D
USA: 800-262-IDEC
Canada: 888-317-IDEC
Circuit Breakers
1. PCB terminal models also available with silver contacts (change “1” or “2” to “5” or “6” respectively, ie LA1T-2C2V becomes
LA1T-2C6V).
2. Terminology: U = up, D = down, C = center.
485
Switches & Pilot Devices
ø16mm - L6 Series
Display Lights
Switches & Pilot Lights
Switch Engraving Order Form – L6 Series
Copy this order form and use it to specify Letter Height, Maximum Number of Lines and Text to be engraved.
To insure engraving accuracy, fax it to your IDEC representative or Distributor.
Your Company:
Telephone:
Name:
Fax:
Address:
Email:
PO:
Part Number to be Engraved:
Please check one of the boxes below to indicate your choice of engraving options:
Relays & Sockets
Rectangular
Switch
Round
Switch
Square
Switch
# of Lines
Letter
Height
Max. Characters
Per Line
# of Lines
Letter
Height
Max. Characters
Per Line
1
5/32
6
1
5/32
5
Letter
Height
Max. Characters
Per Line
5/32
3
1/8
3
1
5/32
6
2
3
5/32
5
1/8
6
2
Custom*
1/8
6
3
Custom*
4
N/A
2
1/8
6
1/8
6
4
N/A
3
4
N/A
Timers
*Engraving is possible, but character size will be
smaller than standard sizes.
1.
2.
3.
4.
Above mentioned specifications hold true for standard size pushbuttons (round, square and rectangular).
Oversize pushbuttons and pilot lights allow you to engrave 1 additional character.
Engraving is done on the button itself for non-iIlluminated push buttons and on marking plate for illuminated pushbuttons and pilot lights.
Please enter text exactly how you want it engraved, take care to emphasize capital or small letters.
Sample Letter Sizes
Enter text to be engraved:
Terminal Blocks
1/8 Letters:
Line 1:
5/32 Letters:
Line 2:
Line 3:
Line 4:
Circuit Breakers
# of
Lines
For IDEC Internal Use Only:
Work Order #:
486
www.idec.com
Switches & Pilot Devices
ø16mm - L6 Series
Accessories
Specifications
Part Number
Notes
Made of metal
MT-001
Used for tightening the plastic locking ring when installing the L6 series unit on a panel.
Tightening torque should not exceed 9kgf cm when
tightening the locking ring.
Lamp Holder Tool
(Made of Rubber)
Made of rubber. Used for removing and replacing
LED and incandescent lamps in illuminated units.
OR-44
Rubber tool used for replacing LED and incandescent
lamps.
Lens Removal Tool
For Illuminated pushbuttons and pilot lights.
MT-101
Used for removing the lens or button from the housing.
LED Lamp
5V DC
6V AC/DC
12V AC/DC
24V AC/DC
120V AC
Incandescent Lamp
6V AC/DC
12V AC/DC
24V AC/DC
Switch Guard
Dust-proof Cover
Terminal Cover
180 degrees
opening,
spring return
LH-06
LH-14
LH-28
Round/Square
AL-K6
Rectangular
AL-KH6
Round/Square
AL-K6SP
Rectangular
AL-KH6SP
Oversize Round/Sq
HA9Z-K1
For round units
AL-D6
For square units
AL-DQ6
For rectangular units
AL-DH6
Made of white nylon
All removable contacts
H6-VL2
Unibody Pilot Lights
H6-PVL
Prevents inadvertent switch operation. IP40 dust-tight
rated.
Prevents inadvertent switch operation. IP65 oiltight
rated.
Provides extra level of sealing for “front-panel” portion
of switches. (Not applicable for units with oversize
lenses or buttons).
Covers terminals to prevent possible electric shock.
Aluminum
AL-BM6
Fills unused panel cutouts. Made of aluminum. Screwon locking ring from inside of panel. IP65 (oiltight) rated.
for LA1K, LA2K, LA3K (#132)
AS6-SK
for HA1K (#231) – oversize
KG9Z-SK
Replacement Keys
Timers
Fills unused panel cutouts. Made of nitrile rubber. Pushin installation from front of panel. IP65 (oiltight) rated.
Mounting Hole Plug
Pair of keys.
All models
Terminal Blocks
Round
Square
Rectangle
Oversize Round
Oversize Square
Mushroom
Replacement
Engraving Inserts
AL6M-W
AL6Q-W
AL6H-W
HA9Z-P1-W
HA9Z-P2-W
HA9Z-P13-W
HA9Z-LN
L6 standard
AL6-LP
L6 oversize
HA9Z-LP
Replacement
Selector Inserts
HA9Z-HC1-j
Replacement
Safety Lever Lock
Prevents rotation of switches in panel. (included with all
assembled switches)
Applicable to round oversize selectors only
j = (G, R, S, W, Y)
HA9Z-LS
USA: 800-262-IDEC
Canada: 888-317-IDEC
487
Circuit Breakers
Replacement
Anti-Rotation Ring
0.5W, T 1-3/4 miniature flange base
AL-B6
Rubber
Replacement
Locking Ring
T 1-3/4 miniature flange base. In place of j specify LED
Color Code (A, G, R, S, W, Y).
Relays & Sockets
90 degrees
opening maintained
LFTD-5k
LFTD-6k
LFTD-1k
LFTD-2k
LFTD-H2k
Display Lights
Ring Wrench
Switches & Pilot Lights
Part
Switches & Pilot Devices
ø16mm - L6 Series
Switches & Pilot Lights
Appearance
Description
Used With
Part Number
ø24mm round, metal (aluminum color), panel cut-out ø20.2mm
Pushbuttons, pilot lights, illuminated
pushbutton, selector switches, key selector
switches and illuminated selector switches.
LA9Z-SM61
ø24mm round, plastic (black), panel cut-out ø20.2mm
LA9Z-S61B
L6 Switch
Flush Bezel
+
LA9Z-S71B
Display Lights
024mm square, plastic (black), panel cut-out 020.2mm
Flush Bezel
24 x 30mm rectangular, plastic (black), panel cut-out ø20.2 x
26.2mm
Switch Guard
w/ Flush Bezel
(spring return)
=
Rectangular, plastic (black)
LA9Z-S81B
LA9Z-KS8
Flush Switch
Dimensions (mm)
Pilot Lights (LA*P,) Pushbuttons (LA*B)
Illuminated Pushbuttons (LA*L)
7.85
Panel Thickness 0.5 to 6
Gasket
Locking Ring
6.4
6.8
1.45
1.45
Note:
1. Pushbuttons do not have lamp terminals.
2. Pilot lights have only lamp terminals.
Anti-rotation Ring
R15.5
0.6
Round
Tab Terminal Width 2.8×0.5t
PC Board Terminal
Width 0.8×0.5t
Square
Rectangular
NO
C
5
6
5
6
NC
X1
NC
X2
NO
X2
C
ø
1.2
ø21
15.8
1
1
K
C
LO
2
17.8
1
2.6
5.5
PC Board Terminal
13.5
36
24
18
9
Solder/Tab Terminal
Lever Switches (LA1T)
Terminal Blocks
10.5
9
8
ø1
Buzzer (LA3Z)
PC Board Terminal
0.8W×0.5t
R15.5
2-R0.6
Tab Terminal
2.8W×0.5t
Panel Thickness
0.5 to 6
LO
C
K
8
2.7
18
X1
6
24
2
17.8
5.5
1.2
ø21
X2
15.8
ø1
10.8
6
Timers
5.7
LOCK
T OP
6.8
Relays & Sockets
Flush bezels not applicable for oversize units.
1
2.6
10.5
9
36
Emergency Stop Switch (HA1B)
K
"
.61 )
RO
m
.5m
(15
Circuit Breakers
Rubber Washer
LOC
Panel Thickness
0.02"-0.24" (0.5~6.0mm)
Stopper
Locking Ring
"
98 )
0. m
Ø .9m
4
(2
PCB Terminal
0.34"
+
(8.7mm)
NC
NC
-
0.21"
(5.4mm)
ø0.70"
ø0.83"
(21mm)
488
(17.8mm)
0.20"
0.41"
(5.2mm)
(10.5mm)
0.62"
(15.8mm)
1.42" (36mm)
0.53"
(13.5mm)
0.43"
(11mm)
0.98" (25mm)
www.idec.com
24
13.5
9
Switches & Pilot Devices
ø16mm - L6 Series
Emergency Stop Switch (HA1E) - Short Body Style
Switches & Pilot Lights
Selector Switches (LA*S,) Illuminated Selector Switches (LA*F,) Key Selector Switches (LA*K)
Panel Thickness 0.5 to 6
6.4
Display Lights
Gasket
Locking Ring
LOCK
1.45
6.8
T OP
Anti-rotation Ring
Round
Tab Terminal Width 2.8×0.5t
Square
Rectangular
ø1
8
PC Board Terminal
Width 0.8×0.5t
LO
R15.5
0.6
C
6
1.2
NO
C
5
18
6
NC
X1
X2
NO
X2
C
ø21
5
2.6
1
10.5
9
5.5
PC Board Terminal
13.5
9
24
18
36
Relays & Sockets
15.8
NC
1
1
K
2
17.8
17
Solder/Tab Terminal
Square
Rectangular
18
ø1
8
Round
9
24
18
26
Timers
PC Board Drilling Layout (Bottom View)
Panel Cut-Out
ø16.2
Illuminated Pushbuttons,
Illuminated Selector Switches
+0.2
0
6.4
Pilot Lights, Selector Switches,
Key Selector Switches
Pushbutton Lever Switches
7.85
6.8
6.8
1.45
5
5
5
24
5
5
5
1
1
1
1.45
Ho
.2
Ho
Ho
ø1
.2
24
le
ø1
ø
Terminal Blocks
le
le
2
1.
HA1B E-Stop
PCB Mounting Pattern
0.21"
(5.3mm)
0.21"
(5.3mm)
USA: 800-262-IDEC
Circuit Breakers
Ø
(1 0
.2 .0
m 5"
m
)
0.34"
0.21"
(5.4mm) (8.7mm)
Canada: 888-317-IDEC
489
Switches & Pilot Devices
ø16mm - L6 Series
NC
NC
X1
Switches & Pilot Lights
Oversize Flush Pushbutton and Pilot Lights
X2
NO
NO
X2
C
C
1.02 [25.9]
0.94 [24.0]
0.43 [11.0]
NO
C
NC
NO
C
NC
Display Lights
Oversize Extended Non-Illuminated Pushbutton
0.59 [15.1]
Relays & Sockets
Oversize Unibody Pilot Lights
1.48 [37.5]
C
NC
NO
NO
C
NC
Timers
Mushroom Pushbuttons
NC
NC
NO
NO
C
Oversize Selector Switch
C
Terminal Blocks
1.18 [30.0]
0.79 [20.0]
Circuit Breakers
0.94 [23.8
0.77 [19.5]
490
www.idec.com
Switches & Pilot Devices
ø16mm - L6 Series
NO
NO
C
C
NC
Switches & Pilot Lights
NC
Oversize Key Switch
1.54 [39.0]
NC
NC
NO
C
Display Lights
NO
Lever Switch
0.94 [23.8]
Relays & Sockets
Flush Bezel
Flush Bezel with Switch
Panel Thickness 0.5 to 5
14.8
8
ø2
4
18
20
Selector Switches
Illuminated &
Non-illuminated
Key
2
18.1
2
10
2
17
26
27.4
24
30
23
Lever
24
18
2
20
21.4
43
Timers
8.5
Rectangular
9
2
24
8.5
21.4
Square
ø1
ø2
4
8
ø1
0.9
0.8
9.8
Plastic
Metal
ø 20
22.6
Round
Flush
Bezel
Gasket
ø21.4
Mounting
Bracket
Terminal Blocks
9.3
2
Flush Bezel Mounting Hole Layout
Square
+
– 0 0.2
.1
Round
Rectangular
26.2 +0.2
– 0.1
24 min.∗
24 min.∗
24 min.∗
24 min.∗
USA: 800-262-IDEC
Circuit Breakers
24 min.∗
+0.2
20.2 -0.1
ø2
0.
2
20.2 +0.2
– 0.1
30 min.∗
Canada: 888-317-IDEC
491
Switches & Pilot Devices
Terminal Configurations
Non Illuminated Pushbutton
AL-K6SP
Illuminated Pushbuttons
Pilot Lights
TOP
Buzzer
TOP
X2
X1
Steady Slow Quick
Input
Terminal
(X1)
Buzzer
Sound
Switch
C
C
X2
C
X2
NC
Input
Terminal
(X2)
Lamp Terminal
(−)
X2
Lamp Terminal
(−)
NO
NC
X2
NO
X1
Lamp Terminal
(+)
X1
NC
NO
Lamp Terminal
(+)
X2
NC
NO
X1
TOP
C
Switches & Pilot Lights
ø16mm - L6 Series
AL-KH6SP
18
24
10.5
Panel Thickness 0.5 to 5
R2
13
23.5
13
45.5 minimum
33
2
45.5 minimum
23.5
10.5
Display Lights
34
14
H6-VL2
30
AL-B6
47
2
TOP
ø18
AL-DH6
24
6
ø16.5
AL-DQ6
ø24
17.6
AL-D6
19 minimum
24
Relays & Sockets
25 minimum
4
Timers
AL-BM6
0.3
7.5
13
21
Waterproof gasket
for dust cover
Waterproof gasket
for dust cover
LFTD
LED Lamp
Internal Circuit
12
ø17.8
2.5
7.5
13
Waterproof gasket
for dust cover
0.3
0.3
13
7.5
15
Gasket
Locking Ring
Terminal Blocks
Panel Thickness 0.5 to 6
LED Chip
Protective Diode
Zener Diode
AL-B6
Circuit Breakers
ø18
6
ø16.5
2
492
www.idec.com
Switches & Pilot Devices
ø16mm - L6 Series
General Instructions
Switches & Pilot Lights
Pushbutton Assembly
Lamp Installation
Lamps can be replaced in two ways:
1. If contacts are accessible (or pushbutton not installed in a panel) then it is
easiest to first remove the contacts from the operator. This will allow easy
access to the lamp/lamp-holder assembly. Grab lamp, depress slightly, and
turn counter clockwise. Lamp can then be removed by pushing it back through
the lamp holder.
Display Lights
2. If contacts are not accessible, then the lamp can be replaced by first removing
the lens from the operator. Just pull lens straight out either with a fingernail
or optional lens removal tool (MT-101). Lamp/lamp-holder assembly can then
be removed with lamp removal tool (OR-44). Insert lamp removal tool through
operator, depress slightly, turn counter clockwise, then pull lamp/lamp-holder
assembly out. Lamp can then be removed by pushing it back through the lamp
holder.
Engraving Lenses
Fitting Grooves
Grooves
Relays & Sockets
All buttons and lenses can be engraved directly on the outside surface. Illuminated lenses also allow for engraving on a plate that is underneath the colored
section of the lens. Remove the colored section of the lens by pulling on the
edge while simultaneously unhooking it from the latches on the lens holder. The
marking plate will then be accessible. It can then be engraved or a thin marked
insert (such as mylar or paper) can be sandwiched between the marking plate
and colored section of the lens.
Engraving
Surface
Color Lens
Marking Plate
Lens Holder
Panel Mounting
Timers
Before any unit can be mounted into a panel, the contact block must be removed. Slide metal locking lever and pull contact off. Loosen and remove the locking ring
and square anti-rotation ring from the operator and insert operator through panel cutout from the front of the panel. Slide on anti-rotation ring and tighten locking
ring, using locking ring wrench (MT-001). Slide contact block onto operator, observing TOP marking on both parts. Slide metal locking lever in direction indicated by
LOCK. The yellow plastic safety lever lock can then be snapped onto the locking lever; this will prevent vibration or maintenance actions from releasing the contact
from the operator.
PCB Mounting
Terminal Blocks
Being able to separate the contacts from the operator allows for assembly of the
front panel components (operator and lens) to be performed in tandem with the
PC board assembly and soldering. For applications where multiple rows of pushbuttons are mounted closely together, or where other components may obstruct
access to the contact locking lever, be sure to include access holes in the PC
board (refer to PC board layout dimensions for location). Also be sure to allow for
space above and to the side of contact to ensure that no components block the
contact block locking lever. PC board pins are designed to rest on the PCB, take
this into consideration to ensure that pins do not short closely spaced traces.
Circuit Breakers
USA: 800-262-IDEC
Canada: 888-317-IDEC
493