TDK MPZ1608S331ATA00 Chip beads for power line Datasheet

E M C
C o m p o n e n t s
February 2015
Chip Beads
For power line
MPZ Series
MPZ1608 Type
MPZ1608
1608[0603 inch]*
* Dimensions Code JIS[EIA]
(2/11)
E M C
C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20150209 / beads_commercial_power_mpz1608_en.fm
(3/11)
E M C
C o m p o n e n t s
Chip Beads
Product compatible with RoHS directive
Halogen-free
Compatible with lead-free solders
For power line
Overview of MPZ1608 Type
FEATURES
Noise reduction solution for power line.
Compared to the MMZ Series, has low direct current resistance for compatibility with large currents, optimal for low power consumption.
Various frequency characteristics with 5 materials of different features for countermeasures against everything from general signals to
high-speed signals.
Performs well even in signal lines where low direct current resistance is required.
APPLICATION
Noise removal for mobile devices such as smartphones and tablet terminals, and various modules.
Noise removal for PCs and recorders, household appliances such as STBs, smart grids, and industrial equipment.
PART NUMBER CONSTRUCTION
MPZ
Series name
1608
L×W×T Dimensions
(mm)
1.6×0.8x0.6
1608
1.6×0.8x0.8
B
Material name
S
Y
B
R
D
471
A
Impedance
(:) at 100MHz
260
26
471
470
Characteristic
type
A
B
T
A00
Packaging style
Internal code
T
Taping
A00
AH0
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Operating
Storage
temperature
temperature
(°C)
(°C)
t=0.6mm
–55 to +125
–55 to +125
MPZ1608
t=0.8mm
–55 to +125
–55 to +125
The Storage temperature range is for after the circuit board is mounted.
Package quantity
Individual weight
(pieces/reel)
4,000
4,000
(mg)
3
4
Type
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150209 / beads_commercial_power_mpz1608_en.fm
(4/11)
E M C
C o m p o n e n t s
MPZ1608 Type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T: Temperature
T4
T3
T2
T3
t3
T1
t1
t2
t: Time
Preheating
Temp.
T1
T2
150°C
180°C
Time
t1
60 to 120s
Soldering
Temp.
Time
T3
t2
230°C
30 to 60s
Peak
Temp.
T4
250 to 260°C
Time
t3
10s
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150209 / beads_commercial_power_mpz1608_en.fm
(5/11)
E M C
C o m p o n e n t s
MPZ1608 Type
MATERIAL CHARACTERISTICS
B material: This type is perfectly suited for fast digital signals. By equalizing R components and X components that beads possess at a
frequency of 5MHz, it is able to suppress overshooting, undershooting and ringing of fast digital signals.
R material: For wide frequency applications calling for broad impedance characteristics.
For digital signal line applications calling requiring good waveform integrity. Impedance values selected for effectiveness at 10
to 200MHz.
S material: Standard type that features impedance characteristics similar to those of a typical ferrite core.
For signal line applications in which the blocking region is near 100MHz. Impedance values selected for effectiveness at 40 to
300MHz.
Y material: High frequency range type intended for the 100MHz region and above.
For signal line applications in which the signal frequency is far from the cutoff frequency. Impedance values selected for
effectiveness at 80 to 400MHz.
D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequencies.
Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications.
TYPICAL MATERIAL IMPEDANCE CHARACTERISTICS
2500
D
2000
Impedance(Ω)
Y
1500
1000
R
S
500
B
0
10
100
Frequency(MHz)
1000
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150209 / beads_commercial_power_mpz1608_en.fm
(6/11)
E M C
C o m p o n e n t s
MPZ1608 Type
SHAPE & DIMENSIONS
T
0.8±0.15
1.6±0.15
Thickness(T)
0.6±0.15mm
0.8±0.15mm
0.3±0.2
Dimensions in mm
0.8
RECOMMENDED LAND PATTERN
0.6
0.8
0.6
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150209 / beads_commercial_power_mpz1608_en.fm
(7/11)
E M C
C o m p o n e n t s
MPZ1608 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Impedance
[100MHz]
(: )
470
26
30
60
100
120
180
220
330
470
600
1000
390
60
100
150
220
30
60
100
Tolerance
±25%
±25%
±10:
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±10:
±25%
±25%
DC resistance
Rated current
Thickness T
Part No.
(: )max.
0.150
0.007
0.010
0.020
0.030
0.045
0.050
0.050
0.080
0.150
0.150
0.300
0.120
0.030
0.040
0.050
0.100
0.060
0.100
0.150
(A)max.
1.0
6.0
5.0
3.5
3.0
2.0
2.0
2.2
1.7
1.0
1.0
0.8
1.2
2.3
2.0
1.8
1.5
1.8
1.2
1.0
(mm)
0.8
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
MPZ1608B471ATA00
MPZ1608S260ATAH0
MPZ1608S300ATAH0
MPZ1608S600ATAH0
MPZ1608S101ATAH0
MPZ1608S121ATAH0
MPZ1608S181ATAH0
MPZ1608S221ATA00
MPZ1608S331ATA00
MPZ1608S471ATA00
MPZ1608S601ATA00
MPZ1608S102ATA00
MPZ1608R391ATA00
MPZ1608Y600BTA00
MPZ1608Y101BTA00
MPZ1608Y151BTA00
MPZ1608Y221BTA00
MPZ1608D300BTA00
MPZ1608D600BTA00
MPZ1608D101BTA00
Please refer to the graph of Rated current vs. temperature characteristics (derating) about the rating current at 85°C or more in temperature of the product.
○ Measurement equipment
Measurement item
Product No.
Impedance
E4991A+16192A
DC resistance
Type-7556
* Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Yokogawa
○ Rated current vs. temperature characteristics (derating)
7
Rated current (A)
6
5
4
3
2
1
0
–55 –35
–15
5
25
45
65
Temperature (°C)
85
105
125
S260A
S300A
S600A
S101A
Y600B
S221A
S121A,S181A,Y101B
S331A
Y221B
Y151B,D300B
R391A,D600B
B471A,S471A,S601A,D101B
S102A
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150209 / beads_commercial_power_mpz1608_en.fm
(8/11)
E M C
C o m p o n e n t s
MPZ1608 Type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
MPZ1608B SERIES
MPZ1608S SERIES
500
1200
MPZ1608B471A
MPZ1608S331A
MPZ1608S221A
MPZ1608S181A
900
MPZ1608S121A
800 MPZ1608S101A
MPZ1608S600A
700 MPZ1608S260A
MPZ1608S300A
MPZ1608R SERIES
500
MPZ1608S102A
MPZ1608R391A
1000
300
200
400
MPZ1608S471A
Impedance (Ω)
Impedance (Ω)
Impedance (Ω)
400
MPZ1608S601A
600
500
400
300
200
300
100
100
200
100
0
1
10
100
1000
Frequency (MHz)
0
1
10000
MPZ1608Y SERIES
100
1000
Frequency (MHz)
600
0
1
10
100
1000
Frequency (MHz)
10000
MPZ1608D101B
MPZ1608Y221B
300
500
MPZ1608Y151B
Impedance (Ω)
250
MPZ1608Y101B
200
150
100
400
MPZ1608D600B
300
200
100
50
MPZ1608Y600B
0
10000
MPZ1608D SERIES
350
Impedance (Ω)
10
1
10
100
1000
Frequency (MHz)
10000
0
1
10
MPZ1608D300B
100
1000
10000
Frequency (MHz)
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150209 / beads_commercial_power_mpz1608_en.fm
(9/11)
E M C
C o m p o n e n t s
MPZ1608 Type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MPZ1608B471ATA00
MPZ1608S260ATAH0
R
100
X
10
100
1000
Frequency (MHz)
10000
MPZ1608S600ATAH0
Impedance (Ω)
Impedance (Ω)
Z
60
R
40
20
0
X
1
10
100
1000
Frequency (MHz)
10000
100
50
10
100
1000
Frequency (MHz)
Z
10
100
1000
Frequency (MHz)
MPZ1608R391ATA00
Impedance (Ω)
400
Z
300
R
100
0
X
1
10
R
100
1000
Frequency (MHz)
10000
10
100
1000
Frequency (MHz)
Z
100
10000
R
50
X
800
700
600
500
400
300
200
100
0
1
140
120
100
80
60
40
20
0
0
X
1
10
100
1000
Frequency (MHz)
10000
1
10
100
1000
Frequency (MHz)
10000
450
400
350
300
250
200
150
100
50
0
Z
R
X
1
10
100
1000
Frequency (MHz)
10000
MPZ1608S102ATA00
1200
1000
Z
R
X
10
100
1000
Frequency (MHz)
800
Z
600
R
400
200
0
10000
MPZ1608Y600BTA00
500
200
Z
50
0
10000
1
MPZ1608S331ATA00
MPZ1608S601ATA00
R
X
150
10000
100
10000
X
1
100
1000
Frequency (MHz)
150
Impedance (Ω)
700
600
500
400
300
200
100
0
10
200
X
MPZ1608S471ATA00
Impedance (Ω)
1
250
R
R
X
MPZ1608S221ATA00
Z
Z
MPZ1608S121ATAH0
R
300
1
10000
Z
250
150
100
1000
Frequency (MHz)
40
35
30
25
20
15
10
5
0
200
300
0
Impedance (Ω)
160
140
120
100
80
60
40
20
0
Impedance (Ω)
Impedance (Ω)
MPZ1608S181ATAH0
200
10
MPZ1608S101ATAH0
100
80
X
Impedance (Ω)
1
R
Impedance (Ω)
0
Z
Impedance (Ω)
200
Impedance (Ω)
Z
300
40
35
30
25
20
15
10
5
0
1
X
1
10
100
1000
Frequency (MHz)
10000
MPZ1608Y101BTA00
200
Impedance (Ω)
400
Impedance (Ω)
Impedance (Ω)
500
MPZ1608S300ATAH0
Z
R
10
100
1000
Frequency (MHz)
Z
100
R
50
X
X
1
150
10000
0
1
10
100
1000
Frequency (MHz)
10000
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150209 / beads_commercial_power_mpz1608_en.fm
(10/11)
E M C
C o m p o n e n t s
MPZ1608 Type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MPZ1608Y151BTA00
MPZ1608Y221BTA00
Z
200
150
R
100
50
0
X
1
10
100
1000
Frequency (MHz)
10000
250
Z
R
X
1
10
100
1000
Frequency (MHz)
10000
200
150
Z
100
50
0
X
1
10
100
1000
Frequency (MHz)
R
10000
MPZ1608D101BTA00
600
350
300
250
200
150
100
50
0
Impedance (Ω)
Impedance (Ω)
MPZ1608D600BTA00
350
300
250
200
150
100
50
0
Impedance (Ω)
250
Impedance (Ω)
Impedance (Ω)
300
MPZ1608D300BTA00
Z
X
R
500
400
200
100
0
1
10
100
1000
Frequency (MHz)
10000
Z
300
1
10
R
X
100
1000
Frequency (MHz)
10000
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150209 / beads_commercial_power_mpz1608_en.fm
(11/11)
E M C
C o m p o n e n t s
MPZ1608 Type
PACKAGING STYLE
REEL DIMENSIONS
ø60min.
2.0±0.5
1.0
8.4 +2.0
–0.0
ø13±0.2
ø21±0.8
14.4max.
ø180±2.0
Dimensions in mm
4.0±0.1
B
A
8.0±0.3
2.0±0.05
3.5±0.05
1.5 +0.1
0
1.75±0.1
TAPE DIMENSIONS
P1
K
Dimensions in mm
Type
MPZ1608
40 to 80
Drawing direction
A
1.1±0.2
Taping
B
1.9±0.2
P1
4.0±0.1
K
1.1max.
200min.
300min.
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150209 / beads_commercial_power_mpz1608_en.fm
Similar pages