Diodes AP7315D-135FS4-7B 150ma high psrr low noise ldo with enable Datasheet

AP7315
150mA HIGH PSRR LOW NOISE LDO WITH ENABLE
Description
Pin Assignments
The AP7315 is a low dropout regulator with high output voltage
accuracy, low RDS(ON), high PSRR, low output noise and low
quiescent current. This regulator is based on a CMOS process.
NEW PRODUCT
The AP7315 includes a voltage reference, error amplifier, current limit
circuit and an enable input to turn it on and off. With the integrated
resistor network fixed output voltage versions can be delivered.
With its low power consumption and line and load transient response,
the AP7315 is well suited for low power handheld communication
equipment.
The AP7315 is packaged in X2-DFN1010-4, SOT23 and SOT25
packages and allows for smallest footprint and dense PCB layout.
Pin 1 – VOUT, Pin 2 – GND, Pin 3 – EN, Pin 4 – VIN
(Top View)
Features

Low VIN and Wide VIN Range: 1.7V to 5.25V


Guarantee Output Current,150mA
VOUT Accuracy ±1%






Ripple Rejection 75dB at 1kHz
Low Output Noise, 60µVrms from 10Hz to 100kHz
Quiescent Current as Low as 35µA
VOUT Fixed 1.1V to 3.3V
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free, Green Device (Note 3)
(Top View)
GND
VIN
3
3
1
2
1
2
VIN
VOUT
GND
VOUT
SOT23 (SA)
(Top View)
VOUT
NC
Applications







SOT23 (SR)
5
Smart Phone/PAD
RF Supply
Cameras
Portable Video
Portable Media Player
Wireless Adapter
Wireless Communication
1
VIN
4
2
3
GND EN/NC
SOT25
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free,"Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
AP7315
Document number: DS38352 Rev. 1 - 2
1 of 23
www.diodes.com
December 2015
© Diodes Incorporated
AP7315
Typical Applications Circuit
VIN
VOUT
VIN
VOUT
AP7315
NEW PRODUCT
CCIN
IN
0.47µF
0.47uF
EN
COUT
COUT
0.47uF
0.47µF
GND
Pin Descriptions
Pin
Name
Pin Number
X2-
SOT25
DFN1010-4
VOUT
1
GND
2
2
EN
3
—
VIN
4
1
—
Thermal
PAD
EN/NC
NC
Function
SOT23 (SA) SOT23 (SR)
5
2
2
Power output pin
3
1
Ground
—
—
Enable pin. Active high
1
3
Power input pin
—
—
—
In PCB layout, prefer to use large copper area to cover this pad for better thermal
dissipation, then connect this area to GND or leave it open. However, do not use it
as GND electrode function alone.
—
3
—
—
Enable pin. Active high/ NC, No connection
—
4
—
—
No connection
Functional Block Diagram
VOUT
VIN
VOUT
VIN
-
-
+
+
VREF
VREF
Current Limit
EN
Current Limit
GND
EN
AP7315 (Non Discharge)
AP7315
Document number: DS38352 Rev. 1 - 2
GND
AP7315D (With Discharge)
2 of 23
www.diodes.com
December 2015
© Diodes Incorporated
AP7315
Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.)
NEW PRODUCT
Symbol
Ratings
Unit
VIN
Input Voltage
6.0
V
VEN
Input Voltage EN
6.0
V
VOUT
Output Voltage
-0.3 to VIN +0.3
V
IOUT
Output Current
300
mA
PD
Power Dissipation
400
mW
TA
Operating Ambient Temperature
-40 to +85
°C
Storage Temperature
-55 to +125
°C
TSTG
Note:
Parameter
4. a). Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and
functional operation of the device at these conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect
device reliability.
b). Ratings apply to ambient temperature at +25°C. The JEDEC High-K board design used to derive this data is a 2in. x 2in. multi-layer board with 1oz.
internal power and ground planes and 2oz. copper traces on the top and bottom of the board.
Recommended Operating Conditions (@TA = +25°C, unless otherwise specified.)
Symbol
Parameter
VIN
Input Voltage
IOUT
Output Current
TA
Operating Ambient Temperature
AP7315
Document number: DS38352 Rev. 1 - 2
3 of 23
www.diodes.com
Min
Max
Unit
1.7
5.25
V
0
150
mA
-40
+85
°C
December 2015
© Diodes Incorporated
AP7315
Electrical Characteristics
(VEN = VIN = VOUT +1.0V, CIN = COUT = 0.47µF, IOUT = 1.0mA @TA = +25°C, unless otherwise specified.)
Parameter
Input Voltage
Conditions
TA = -40°C to +85°C
VOUT ≥ 2.0V, VIN = VOUT+1V, TA = +25°C
Output Voltage Accuracy (Note 11)
NEW PRODUCT
VOUT < 2.0V, VIN = VOUT+1V, TA = +25°C
Min
Typ
Max
Units
1.7
—
5.25
V
VOUT
*0.99
VOUT 20mV
VOUT
VOUT
VOUT
*1.01
VOUT +
20mV
V
V
Line Regulation (dVOUT/dVIN/VOUT) VIN = (VOUT – Nom + 1.0V) to 5.25V, IOUT = 1.0mA
—
0.02
0.1
%/V
Load Regulation
(dVOUT/VOUT/dIOUT)
VIN = VOUT - Nom + 1.0V, IOUT = 1mA to 150mA
—
0.5
1.0
%/A
Quiescent Current
IOUT = 0mA
20
35
60
(Note 6)
IOUT = 150mA
30
60
100
ISTANDBY
VEN = 0V (Disabled)
—
0.01
1.0
μA
Output Current
—
150
—
—
mA
Fold-back Short Current (Note 7)
VOUT Short to Ground
—
55
—
mA
PSRR (Note 8)
VIN = (VOUT+1V)VDC + 0.2Vp-pAC,
VOUT ≥ 1.8V,
IOUT = 30mA
—
75
—
dB
Output Noise Voltage (Notes 8, 9)
BW = 10Hz to 100kHz, IOUT = 30mA
µVrms
Dropout Voltage
(Note 5)
IOUT = 150mA
f = 1kHz
—
60
—
1.1V ≤ VOUT < 1.5V
—
0.50
0.64
1.5V ≤ VOUT < 1.7V
—
0.38
0.49
1.7V ≤ VOUT < 2.0V
—
0.34
0.44
2.0V ≤ VOUT < 2.5V
—
0.28
0.38
2.5V ≤ VOUT < 2.8V
—
0.22
0.32
2.8V ≤ VOUT ≤ 3.3V
—
0.21
0.29
μA
V
Output Voltage Temperature
Coefficient
IOUT = 30mA, TA = -40°C to +85°C
—
±30
—
ppm/°C
EN Input Low Voltage
—
0
—
0.5
V
EN Input High Voltage
—
1.3
—
5.25
V
EN Input Leakage
VEN = 0, VIN = 5.0V or VEN = 5.0V, VIN = 0V
-1.0
—
+1.0
µA
On Resistance of N-channel for
Auto-Discharge (Note 10)
VIN = 4.0V VEN = 0V (Disabled)
—
30
—
Ω
Notes:
5. Dropout voltage is the voltage difference between the input and the output at which the output voltage drops 2% below its nominal value.
6. Quiescent current is defined here is the difference in current between the input and the output.
7. Short circuit current is measured with VOUT pulled to GND.
8. This specification is guaranteed by design.
9. To make sure lowest environment noise minimizes the influence on noise measurement.
10. AP7315 has 2 options for output, built-in discharge and non-discharge.
11. Potential multiple grades based on following output voltage accuracy.
AP7315
Document number: DS38352 Rev. 1 - 2
4 of 23
www.diodes.com
December 2015
© Diodes Incorporated
AP7315
Typical Characteristics
Output Voltage vs. Output Current
Output Voltage vs. Output Current
AP7315-25
AP7315-18
1.8
Output Voltage VOUT (V)
Output Voltage VOUT (V)
3.0
VIN=2.8V
VIN=3.6V
VIN=4.2V
VIN=5V
VIN=5.5V
1.5
1.2
0.9
0.6
2.5
VIN=3.5V
VIN=4.2V
VIN=5V
VIN=5.5V
2.0
1.5
1.0
0.5
0.3
0.0
0.0
0
100
200
300
400
Output Current IOUT (mA)
500
0
100
200
300
400
Output Current IOUT (mA)
500
Output Noise (AP7315-33)
Output Voltage vs. Output Current
AP7315-33
Output Voltage VOUT (V)
3.5
3.0
VIN=4.3V
VIN=5V
VIN=5.5V
2.5
2.0
1.5
1.0
0.5
0.0
0
100
200
300
400
Output Current IOUT (mA)
500
Output Voltage vs. Intput Voltage
Output Voltage vs. Intput Voltage
AP7315-33
AP7315-25
3.5
3.5
3.0
3.0
Output Voltage V OUT (V)
Output Voltage VOUT (V)
NEW PRODUCT
2.1
2.5
2.0
1.5
1.0
IOUT=1mA
IOUT=30mA
IOUT=50mA
0.5
2.5
2.0
1.5
1.0
IOUT=1mA
IOUT=30mA
IOUT=50mA
0.5
0.0
0.0
0
1
2
3
Input Voltage VIN (V)
AP7315
Document number: DS38352 Rev. 1 - 2
4
0
5
5 of 23
www.diodes.com
1
2
3
Input Voltage VIN (V)
4
5
December 2015
© Diodes Incorporated
AP7315
Typical Characteristics (Cont.)
Supply Current vs. Input Voltage
Supply Current vs. Input Voltage
AP7315-25
40
Supply Current ISS (μA)
Supply Current ISS (μA)
AP7315-33
50
30
20
10
40
30
20
10
0
0
0
1
2
3
Input Voltage VIN (V)
4
5
0
1
4
5
AP7315-33
AP7315-25
2.55
3.35
2.54
3.34
2.53
3.33
Output Voltage VOUT (V)
Output Voltage VOUT (V)
2
3
Input Voltage VIN (V)
Output Voltage vs. Temperature
Output Voltage vs. Temperature
2.52
2.51
2.50
2.49
2.48
2.47
3.32
3.31
3.30
3.29
3.28
3.27
3.26
2.46
3.25
2.45
-50
-25
0
25
50
Temperature Topt (℃)
75
-50
100
AP7315-25
0
25
50
Temperature Topt (℃)
75
100
AP7315-33
40
Supply Current Iss (µA)
40
-25
Supply Current vs. Temperature
Supply Current vs. Temperature
AP7315-33
Supply Current vs. Temperature
Supply Current vs. Temperature
AP7315-25
Supply Current Iss (µA)
NEW PRODUCT
50
38
36
34
32
38
36
34
32
30
30
-50
-25
0
25
50
Temperature Topt (℃)
AP7315
Document number: DS38352 Rev. 1 - 2
75
100
6 of 23
www.diodes.com
-50
-25
0
25
50
Temperature Topt (℃)
75
100
December 2015
© Diodes Incorporated
AP7315
Typical Characteristics (Cont.)
Dropout Voltage vs. Output Current
Dropout Voltage vs. Output Current
AP7315-33
AP7315-25
300
Dropout Voltage VDIF (mV)
Dropout Voltage VDIF (mV)
85℃
25℃
-40℃
250
200
150
100
85℃
25℃
-40℃
250
200
150
100
50
50
0
0
0
25
50
75
100
Output Current IOUT (mA)
125
0
150
Dropout Voltage vs. Temperature
25
50
75
100
Output Current IOUT (mA)
150
AP7315-33
450
450
150mA
100mA
50mA
350
150mA
100mA
50mA
400
Dropout Voltage VDIF (mV)
400
Dropout Voltage VDIF (mV)
125
Dropout Voltage vs. Temperature
AP7315-25
300
250
200
150
100
50
350
300
250
200
150
100
50
0
0
-50
-25
0
25
50
Temperature Topt (℃)
75
100
-50
0
25
50
Temperature Topt (℃)
75
100
AP7315-25
AP7315-18
100
120
IOUT=1mA
IOUT=30mA
IOUT=150mA
IOUT=1mA
IOUT=30mA
IOUT=150mA
90
Ripple Rejection RR (dB)
100
-25
Ripple Rejection vs. Frequency
Ripple Rejection vs. Frequency
Ripple Rejection RR (dB)
NEW PRODUCT
300
80
60
40
20
80
70
60
50
40
30
20
10
0
100
0
100
1000
10000
100000
1000000
1000
10000
100000
1000000
Frequency f (Hz)
Frequency f (Hz)
AP7315
Document number: DS38352 Rev. 1 - 2
7 of 23
www.diodes.com
December 2015
© Diodes Incorporated
AP7315
Typical Characteristics (Cont.)
Ripple Rejection vs. Frequency
AP7315-33
Ripple Rejection RR (dB)
IOUT=1mA
IOUT=30mA
IOUT=150mA
100
80
60
40
20
0
100
1000
10000
100000
1000000
Frequency f (Hz)
AP7315-33
AP7315-25
6
Output Voltage
2.520
2.500
Output Voltage VOUT (V)
3
Input Voltage VIN (V)
Output Voltage VOUT (V)
4
Input Voltage
4
Input Voltage
Output Voltage
3.320
3.300
Input Voltage VIN (V)
5
5
3.280
2.480
0
0
20
40
60
80
20
40
60
80
100
100
Time t (µs)
Time t (µs)
VIN=3.5V
tr=tf=0.5µs
AP7315-33
VIN=4.3V
tr=tf=0.5µs
150
150
100
0
2.55
2.50
Output Voltage
2.45
Output Voltage VOUT (V)
50
Output Current
50mA  100mA
Output Current IOUT (mA)
100
Output Current
50mA  100mA
50
0
3.35
3.30
3.25
Output Current IOUT (mA)
AP7315-25
Output Voltage VOUT (V)
NEW PRODUCT
120
Output Voltage
3.20
0
2.40
0
20
40
60
80
20
40
60
80
100
100
Time t (µs)
Time t (µs)
AP7315
Document number: DS38352 Rev. 1 - 2
8 of 23
www.diodes.com
December 2015
© Diodes Incorporated
AP7315
Typical Characteristics (Cont.)
VIN=3.5V
tr=tf=0.5µs
AP7315-33
VIN=4.3V
tr=tf=0.5µs
300
300
2.70
2.50
Output Current
1mA  150mA
0
3.50
3.30
Output Voltage
3.10
Output Voltage
2.90
0
20
40
60
20
40
80
AP7315-25
IOUT=0mA
3
IOUT=150mA
3
2
2
CE Input Voltage
CE Input Voltage
1
0
3
2
1
Output Voltage
0
40
80
120
160
Output Voltage VOUT (V)
CE Input Voltage VCE (V)
Output Voltage VOUT (V)
1
0
0
3
2
1
Output Voltage
0
0
200
40
80
120
160
AP7315-33
AP7315-33
IOUT=0mA
3
IOUT=150mA
3
2
2
CE Input Voltage
CE Input Voltage
1
3
2
1
Output Voltage
40
80
120
160
Output Voltage VOUT (V)
0
CE Input Voltage VCE (V)
1
0
0
3
2
1
Document number: DS38352 Rev. 1 - 2
Output Voltage
0
0
200
40
80
120
160
200
Time t (µs)
Time t (µs)
AP7315
200
Time t (µs)
Time t (µs)
0
100
Time t (µs)
Time t (µs)
AP7315-25
60
100
80
CE Input Voltage VCE (V)
0
100
CE Input Voltage VCE (V)
2.10
Output Voltage VOUT (V)
0
150
Output Current IOUT (mA)
Output Voltage VOUT (V)
Output Current
1mA  150mA
2.30
Output Voltage VOUT (V)
NEW PRODUCT
150
Output Current IOUT (mA)
AP7315-25
9 of 23
www.diodes.com
December 2015
© Diodes Incorporated
AP7315
Typical Characteristics (Cont.)
IOUT=0mA
AP7315D-18
6
IOUT=150mA
6
4
4
CE Input Voltage
CE Input Voltage
Output Voltage
1
0
40
80
120
160
4
0
3
2
Output Voltage
1
0
200
0
40
Time t (µs)
AP7315D-33
80
120
160
AP7315D-33
IOUT=0mA
IOUT=150mA
6
4
4
CE Input Voltage
CE Input Voltage
2
3
2
Output Voltage
1
0
80
120
160
200
Output Voltage VOUT (V)
0
2
CE Input Voltage VCE (V)
4
40
4
0
3
2
Output Voltage
1
0
0
Time t (µs)
AP7315
Document number: DS38352 Rev. 1 - 2
200
Time t (µs)
6
0
CE Input Voltage VCE (V)
3
2
Output Voltage VOUT (V)
0
2
CE Input Voltage VCE (V)
Output Voltage VOUT (V)
4
0
Output Voltage VOUT (V)
NEW PRODUCT
2
40
80
120
160
CE Input Voltage VCE (V)
AP7315D-18
200
Time t (µs)
10 of 23
www.diodes.com
December 2015
© Diodes Incorporated
AP7315
Application Information
Output Capacitor
An output capacitor (COUT) is needed to improve transient response and maintain stability. The AP7315 is stable with very small ceramic output
capacitors. The ESR (equivalent series resistance) and capacitance drives the selection. If the application has large load variations, it is
recommended to utilize low-ESR bulk capacitors. It is recommended to place ceramic capacitors as close as possible to the load and the ground
pin and care should be taken to reduce the impedance in the layout.
To prevent the input voltage from dropping during load steps it is recommended to utilize an input capacitor (C IN). A minimum 0.47μF ceramic
capacitor is recommended between VIN and GND pins to decouple input power supply glitch. This input capacitor must be located as close as
possible to the device to assure input stability and reduce noise. For PCB layout, a wide copper trace is required for both VIN and GND pins.
Enable Control
The AP7315 is turned on by setting the EN pin high, and is turned off by pulling it low. If this feature is not used, the EN pin should be tied to VIN pin
to keep the regulator output on at all time. To ensure proper operation, the signal source used to drive the EN pin must be able to swing above and
below the specified turn-on/off voltage thresholds listed in the Electrical Characteristics section.
Short Circuit Protection
When VOUT pin is short-circuit to GND, short circuit protection will be triggered and clamp the output current to approximately 60mA. This feature
protects the regulator from over-current and damage due to overheating.
Layout Considerations
For good ground loop and stability, the input and output capacitors should be located close to the VIN, VOUT, and GND pins of the device. The
regulator GND pin should be connected to the external circuit ground to reduce voltage drop caused by trace impedance. Ground plane is generally
used to reduce trace impedance. Wide trace should be used for large current paths from VIN to VOUT, and load circuit.
ESR vs. Output Current
Ceramic type output capacitor is recommended for this series; however, the other output capacitors with low ESR also can be used. The relations
between IOUT (Output Current) and ESR of an output capacitor are shown below. The stable region is marked as the hatched area in the graph.
Measurement conditions:
Frequency Band: 10Hz to 2MHz, Temperature: -40°C to +85°C
ESR vs. Output Current
ESR vs. Output Current
AP7315-33
AP7315-18
100
100
10
10
-40°C
85°C
1
ESR (Ω)
ESR (Ω)
NEW PRODUCT
Input Capacitor
Stable Range
0.1
-40°C
85°C
1
Stable Range
0.1
0.01
0.01
0.001
0.001
0
25
50
75
100
125
0
150
Document number: DS38352 Rev. 1 - 2
50
75
100
125
150
Output Current IOUT (mA)
Output Current IOUT (mA)
AP7315
25
11 of 23
www.diodes.com
December 2015
© Diodes Incorporated
AP7315
Ordering Information (Note 12)
AP7315X - XXX XXX - XX
Output Voltage
Package Code
Packing
Blank: Non Discharge
D: Discharge
11 : 1.1V
12 : 1.2V
135 : 1.35V
15 : 1.5V
18 : 1.8V
185 : 1.85V
22 : 2.2V
23 : 2.3V
25 : 2.5V
26 : 2.6V
28 : 2.8V
285 : 2.85V
29 : 2.9V
295 : 2.95V
30 : 3.0V
31 : 3.1V
32 : 3.2V
33 : 3.3V
FS4: X2-DFN1010-4
W5: SOT25
SA: SOT23
SR: SOT23
7B: Tape & Reel
7: Tape & Reel
NEW PRODUCT
Output Discharge
Part Number
Package
Code
Packaging
AP7315-XXXFS4-7B
AP7315D-XXXFS4-7B
AP7315-XXXW5-7
AP7315D-XXXW5-7
AP7315-XXXSA-7
AP7315-XXXSR-7
FS4
FS4
W5
W5
SA
SR
X2-DFN1010-4
X2-DFN1010-4
SOT25
SOT25
SOT23
SOT23
Note:
Quantity
7” Tape and Reel
Part Number Suffix
10000/Tape & Reel
10000/Tape & Reel
3000/Tape & Reel
3000/Tape & Reel
3000/Tape & Reel
3000/Tape & Reel
-7B
-7B
-7
-7
-7
-7
12. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
AP7315
Document number: DS38352 Rev. 1 - 2
12 of 23
www.diodes.com
December 2015
© Diodes Incorporated
AP7315
Marking Information
(1)
X2-DFN1010-4
( (Top
Top View)
View )
XXX
NEW PRODUCT
YWX
Part Number
XXX : Identification Code
Y : Year : 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : Internal Code
Package
Identification Code
AP7315-11FS4-7B
X2-DFN1010-4
15A
AP7315-12FS4-7B
X2-DFN1010-4
15B
AP7315-135FS4-7B
X2-DFN1010-4
15C
AP7315-15FS4-7B
X2-DFN1010-4
15D
AP7315-18FS4-7B
X2-DFN1010-4
15E
AP7315-185FS4-7B
X2-DFN1010-4
15F
AP7315-22FS4-7B
X2-DFN1010-4
15G
AP7315-23FS4-7B
X2-DFN1010-4
15H
AP7315-25FS4-7B
X2-DFN1010-4
15J
AP7315-26FS4-7B
X2-DFN1010-4
15K
AP7315-28FS4-7B
X2-DFN1010-4
15M
AP7315-285FS4-7B
X2-DFN1010-4
15N
AP7315-295FS4-7B
X2-DFN1010-4
15P
AP7315-30FS4-7B
X2-DFN1010-4
15R
AP7315-31FS4-7B
X2-DFN1010-4
15S
AP7315-32FS4-7B
X2-DFN1010-4
15T
AP7315-33FS4-7B
X2-DFN1010-4
15U
AP7315D-11FS4-7B
X2-DFN1010-4
5DA
AP7315D-12FS4-7B
X2-DFN1010-4
5DB
AP7315D-135FS4-7B
X2-DFN1010-4
5DC
AP7315D-15FS4-7B
X2-DFN1010-4
5DD
AP7315D-18FS4-7B
X2-DFN1010-4
5DE
AP7315D-185FS4-7B
X2-DFN1010-4
5DF
AP7315D-22FS4-7B
X2-DFN1010-4
5DG
AP7315D-23FS4-7B
X2-DFN1010-4
5DH
AP7315D-25FS4-7B
X2-DFN1010-4
5DJ
AP7315D-26FS4-7B
X2-DFN1010-4
5DK
AP7315D-28FS4-7B
X2-DFN1010-4
5DM
AP7315D-285FS4-7B
X2-DFN1010-4
5DN
AP7315D-29FS4-7B
X2-DFN1010-4
5DP
AP7315D-295FS4-7B
X2-DFN1010-4
5DR
AP7315D-30FS4-7B
X2-DFN1010-4
5DS
AP7315D-31FS4-7B
X2-DFN1010-4
5DT
AP7315D-32FS4-7B
X2-DFN1010-4
5DU
AP7315D-33FS4-7B
X2-DFN1010-4
5DV
AP7315
Document number: DS38352 Rev. 1 - 2
13 of 23
www.diodes.com
December 2015
© Diodes Incorporated
AP7315
Marking Information (Cont.)
(2)
SOT25
(Top View)
4
7
5
NEW PRODUCT
XXX
YWX
1
Part Number
2
3
XXX : Identification Code
Y : Year 0 to 9
W : Week : A to Z : 1 to 26 week;
a to z : 27 to 52 week; z represents
52 and 53 week
X : Internal Code
Package
Identification Code
AP7315-11W5-7
SOT25
15A
AP7315-12W5-7
SOT25
15B
AP7315-135W5-7
SOT25
15C
AP7315-15W5-7
SOT25
15D
AP7315-18W5-7
SOT25
15E
AP7315-185W5-7
SOT25
15F
AP7315-22W5-7
SOT25
15G
AP7315-23W5-7
SOT25
15H
AP7315-25W5-7
SOT25
15J
AP7315-26W5-7
SOT25
15K
AP7315-28W5-7
SOT25
15M
AP7315-285W5-7
SOT25
15N
AP7315-295W5-7
SOT25
15P
AP7315-30W5-7
SOT25
15R
AP7315-31W5-7
SOT25
15S
AP7315-32W5-7
SOT25
15T
AP7315-33W5-7
SOT25
15U
AP7315D-11W5-7
SOT25
5DA
AP7315D-12W5-7
SOT25
5DB
AP7315D-135W5-7
SOT25
5DC
AP7315D-15W5-7
SOT25
5DD
AP7315D-18W5-7
SOT25
5DE
AP7315D-185W5-7
SOT25
5DF
AP7315D-22W5-7
SOT25
5DG
AP7315D-23W5-7
SOT25
5DH
AP7315D-25W5-7
SOT25
5DJ
AP7315D-26W5-7
SOT25
5DK
AP7315D-28W5-7
SOT25
5DM
AP7315D-285W5-7
SOT25
5DN
AP7315D-29W5-7
SOT25
5DP
AP7315D-295W5-7
SOT25
5DR
AP7315D-30W5-7
SOT25
5DS
AP7315D-31W5-7
SOT25
5DT
AP7315D-32W5-7
SOT25
5DU
AP7315D-33W5-7
SOT25
5DV
AP7315
Document number: DS38352 Rev. 1 - 2
14 of 23
www.diodes.com
December 2015
© Diodes Incorporated
AP7315
Marking Information (Cont.)
(3)
SOT23
(Top View)
3
XXX
YWX
NEW PRODUCT
1
Part Number
2
XXX : Identification Code
Y : Year 0 to 9
W : Week : A to Z : 1 to 26 week;
a to z : 27 to 52 week; z represents
52 and 53 week
X : Internal Code
Package
Identification Code
AP7315-11SA-7
SOT23
15A
AP7315-12SA-7
SOT23
15B
AP7315-135SA-7
SOT23
15C
AP7315-15SA-7
SOT23
15D
AP7315-18SA-7
SOT23
15E
AP7315-185SA-7
SOT23
15F
AP7315-22SA-7
SOT23
15G
AP7315-23SA-7
SOT23
15H
AP7315-25SA-7
SOT23
15J
AP7315-26SA-7
SOT23
15K
AP7315-28SA-7
SOT23
15M
AP7315-285SA-7
SOT23
15N
AP7315-295SA-7
SOT23
15P
AP7315-30SA-7
SOT23
15R
AP7315-31SA-7
SOT23
15S
AP7315-32SA-7
SOT23
15T
AP7315-33SA-7
SOT23
15U
AP7315-11SR-7
SOT23
5DA
AP7315-12SR-7
SOT23
5DB
AP7315-135SR-7
SOT23
5DC
AP7315-15SR-7
SOT23
5DD
AP7315-18SR-7
SOT23
5DE
AP7315-185SR7
SOT23
5DF
AP7315-22SR-7
SOT23
5DG
AP7315-23SR-7
SOT23
5DH
AP7315-25SR-7
SOT23
5DJ
AP7315-26SR-7
SOT23
5DK
AP7315-28SR-7
SOT23
5DM
AP7315-285SR-7
SOT23
5DN
AP7315-295SR-7
SOT23
5DR
AP7315-30SR-7
SOT23
5DS
AP7315-31SR-7
SOT23
5DT
AP7315-32SR-7
SOT23
5DU
AP7315-33SR-7
SOT23
5DV
AP7315
Document number: DS38352 Rev. 1 - 2
15 of 23
www.diodes.com
December 2015
© Diodes Incorporated
AP7315
Package Outline Dimensions
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
(1)
Package Type: X2-DFN1010-4
NEW PRODUCT
A3
A1
A
Seating Plane
D
C0
.25
L1
.18
C0
(
3x
)
e
E
E2
L
Z
AP7315
Document number: DS38352 Rev. 1 - 2
D
L2
2
b
16 of 23
www.diodes.com
X2-DFN1010-4
Dim
Min
Max
Typ
A
0.40
0.39
A1
0.00
0.05
0.02
A3
0.13
b
0.20
0.30
0.25
D
0.95
1.05
1.00
D2
0.38
0.58
0.48
E
0.95
1.05
1.00
E2
0.38
0.58
0.48
e
0.65
L
0.20
0.30
0.25
L1
0.27
0.37
0.32
L2
0.02
0.12
0.07
Z
0.050
All Dimensions in mm
December 2015
© Diodes Incorporated
AP7315
Package Outline Dimensions (All dimensions in mm.)
(2)
Package Type: SOT23
3.0 °
7.0°
NEW PRODUCT
0.500(0.020)
0.700(0.028)
2.0°
1.050(0.041)REF
0.0°~10.0°
0.010(0.0004)
0.100(0.004) 0.200(0.008)MIN
Document number: DS38352 Rev. 1 - 2
7.0°
0.080(0.003)
0.180(0.007)
0.550(0.022)REF
1.200(0.047)
1.400(0.055)
2.300(0.091)
2.500(0.098)
AP7315
R0.100(0.004)
0.900(0.035)
1.100(0.043)
2.800(0.110)
3.000(0.118)
0.890(0.035)
1.030(0.041)
0.100(0.004) GAUGE PLANE
4×R0.100(0.004)
0.300(0.012)
0.510(0.020)
1.900(0.075)REF
17 of 23
www.diodes.com
December 2015
© Diodes Incorporated
AP7315
Package Outline Dimensions (All dimensions in mm.)
(3)
Package Type: SOT25
0.300(0.012)
0.600(0.024)
0.100(0.004)
0.200(0.008)
1.500(0.059)
1.700(0.067)
3.000(0.118)
2.650(0.104)
NEW PRODUCT
2.820(0.111)
3.100(0.122)
0.200(0.008)
0.700(0.028)
REF
0.300(0.012)
0.500(0.020)
0°
8°
1.800(0.071)
2.000(0.079)
0.000(0.000)
MAX
1.450(0.057)
0.950(0.037)
TYP
0.150(0.006)
0.900(0.035)
1.300(0.051)
AP7315
Document number: DS38352 Rev. 1 - 2
18 of 23
www.diodes.com
December 2015
© Diodes Incorporated
AP7315
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
(1)
Package Type: X2-DFN1010-4
X2
C
Dimensions
NEW PRODUCT
Y2
Y1
Y3
X3
Y4
X1
Y5
Y
C
X
X1
X2
X3
Y
Y1
Y2
Y3
Y4
Y5
Value
(in mm)
0.650
0.250
0.480
0.900
0.070
0.400
0.470
0.220
0.480
1.300
0.180
X
AP7315
Document number: DS38352 Rev. 1 - 2
19 of 23
www.diodes.com
December 2015
© Diodes Incorporated
AP7315
Suggested Pad Layout (Cont.)
(2)
Package Type: SOT23
NEW PRODUCT
Grid placement courtyard
Y
Z
G
Y
X
E
Dimensions
Z
(mm)/(inch)
G
(mm)/(inch)
X
(mm)/(inch)
Y
(mm)/(inch)
E
(mm)/(inch)
Value
2.900/0.114
1.100/0.043
0.800/0.031
0.900/0.035
0.950/0.037
AP7315
Document number: DS38352 Rev. 1 - 2
20 of 23
www.diodes.com
December 2015
© Diodes Incorporated
AP7315
Suggested Pad Layout (Cont.)
Package Type: SOT25
NEW PRODUCT
(3)
E2
G
Z
E1
Y
X
Dimensions
Z
(mm)/(inch)
G
(mm)/(inch)
X
(mm)/(inch)
Y
(mm)/(inch)
E1
(mm)/(inch)
E2
(mm)/(inch)
Value
3.600/0.142
1.600/0.063
0.700/0.028
1.000/0.039
0.950/0.037
1.900/0.075
AP7315
Document number: DS38352 Rev. 1 - 2
21 of 23
www.diodes.com
December 2015
© Diodes Incorporated
AP7315
Tape Orientation
NEW PRODUCT
For AP7315-XXXFS4-7B & AP7315D-XXXFS4-7B
Note:
13. The taping orientation of the other package type can be found on our website at http://www.diodes.com/datasheets/ap02007.pdf.
AP7315
Document number: DS38352 Rev. 1 - 2
22 of 23
www.diodes.com
December 2015
© Diodes Incorporated
AP7315
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
NEW PRODUCT
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2015, Diodes Incorporated
www.diodes.com
AP7315
Document number: DS38352 Rev. 1 - 2
23 of 23
www.diodes.com
December 2015
© Diodes Incorporated
Similar pages