NICHIA NVSW119C Built-in esd protection device Datasheet

NICHIA STS-DA1-3562A <Cat.No.150602>
NICHIA CORPORATION
SPECIFICATIONS FOR WHITE LED
NVSW119CT
● Pb-free Reflow Soldering Application
● Built-in ESD Protection Device
● RoHS Compliant
NICHIA STS-DA1-3562A <Cat.No.150602>
SPECIFICATIONS
(1) Absolute Maximum Ratings
Symbol
Absolute Maximum Rating
Unit
Forward Current
Item
IF
1800
mA
Pulse Forward Current
IFP
2400
mA
Allowable Reverse Current
IR
85
mA
Power Dissipation
PD
5.94
W
Operating Temperature
Topr
-40~100
°C
Storage Temperature
Tstg
-40~100
°C
Junction Temperature
TJ
150
°C
* Absolute Maximum Ratings at TS=25°C.
* IFP conditions with pulse width ≤10ms and duty cycle ≤10%.
(2) Initial Electrical/Optical Characteristics
Item
Symbol
Forward Voltage
Rnn
R70
R8000
Chromaticity Coordinate
VF
Luminous Flux
Φv
Luminous Intensity
Iv
Color Rendering Index
Ra
Luminous Flux
Φv
Luminous Intensity
Iv
Color Rendering Index
Ra
Luminous Flux
Φv
Luminous Intensity
Iv
Color Rendering Index
Typ
Max
2.98
-
IF=350mA
2.83
-
IF=700mA
325
-
IF=350mA
179
-
IF=700mA
93
-
IF=350mA
61
-
IF=700mA
-
-
IF=700mA
322
-
IF=350mA
174
-
IF=700mA
92
-
IF=350mA
60
-
IF=700mA
73
-
Unit
V
lm
cd
lm
cd
-
IF=700mA
280
-
IF=350mA
151
-
IF=700mA
83
-
IF=350mA
55
-
Ra
IF=700mA
83
-
-
-
IF=700mA
0.3447
-
-
-
IF=700mA
0.3553
-
-
RθJS
-
4.2
6.4
°C/W
x
y
Thermal Resistance
Condition
IF=700mA
lm
cd
* Characteristics at TS=25°C.
* Luminous Flux value as per CIE 127:2007 standard.
* Chromaticity Coordinates as per CIE 1931 Chromaticity Chart.
* RθJS is Thermal Resistance from junction to TS measuring point.
1
NICHIA STS-DA1-3562A <Cat.No.150602>
RANKS
Item
Rank
Condition
Min
Max
3.1
3.3
2.9
3.1
L1
2.7
2.9
D320
320
340
D300
300
320
M1
Forward Voltage
Luminous Flux
Color Rendering Index
IF=700mA
L2
D280
280
300
D260
IF=700mA
260
280
D240
240
260
Unit
V
lm
Rnn
Ra
-
-
-
R70
Ra
70
-
-
80
-
-
0
-
-
Ra
R8000
IF=700mA
R9
Color Ranks
The color rank has a chromaticity range within a 3-step MacAdam ellipse.
Center Point
x
Rank
Rank
Rank
sm503
sm573
sm653
0.3447
0.3287
0.3123
y
0.3553
0.3417
0.3282
a
0.003555
0.003087
0.002709
Major Axis
b
0.008418
0.007809
0.006561
Ellipse Rotation Angle
Φ
-31.78
-31.56
-32.35
Minor Axis
The color rank has a chromaticity range within a 5-step MacAdam ellipse.
Rank
Rank
Rank
sm505
sm575
sm655
x
0.3447
0.3287
0.3123
y
0.3553
0.3417
0.3282
Minor Axis
a
0.005925
0.005145
0.004515
Major Axis
b
0.014030
0.013015
0.010935
Ellipse Rotation Angle
Φ
-31.78
-31.56
-32.35
Center Point
The color rank has a chromaticity range within a 7-step MacAdam ellipse.
Rank
Rank
Rank
sm507
sm577
sm657
x
0.3447
0.3287
0.3123
y
0.3553
0.3417
0.3282
a
0.008295
0.007203
0.006321
Major Axis
b
0.019642
0.018221
0.015309
Ellipse Rotation Angle
Φ
-31.78
-31.56
-32.35
Center Point
Minor Axis
* Ranking at TS=25°C.
* Forward Voltage Tolerance: ±0.05V
* Luminous Flux Tolerance: ±7%
* Color Rendering Index Ra Tolerance: ±2
* Color Rendering Index R9 Tolerance: ±6.5
* The R9 value for the above rank shall be greater than 0.
* Chromaticity Coordinate Tolerance: ±0.005
* LEDs from the above ranks will be shipped.
The rank combination ratio per shipment will be decided by Nichia.
2
NICHIA STS-DA1-3562A <Cat.No.150602>
Luminous Flux Ranks by Color Rank, Color Rendering Index Rank
Ranking by
Luminous Flux
Ranking by
D240
D260
D280
D300
D320
Color Coordinates,
Color Rendering Index
sm503,sm505,sm507
sm573,sm575,sm577,
sm653,sm655,sm657
Rnn,R70
R8000
R70
3
NICHIA STS-DA1-3562A <Cat.No.150602>
CHROMATICITY DIAGRAM
0.40
黒体放射軌跡
Blackbody Locus
sm577
sm575
sm507
sm573
0.35
sm505
sm503
sm657
y
sm655
sm653
5000K
0.30
5700K
6500K
0.25
0.25
0.30
0.35
0.40
x
4
NICHIA STS-DA1-3562A <Cat.No.150602>
3.2
2
3.5
OUTLINE DIMENSIONS
5
NICHIA STS-DA1-3562A <Cat.No.150602>
SOLDERING
• Recommended Reflow Soldering Condition(Lead-free Solder)
1 to 5°C per sec
• Recommended Hand Soldering Condition
Temperature
350°C Max
Soldering Time
3sec Max
260°CMax
10sec Max
Pre-heat
180 to 200°C
60sec Max
Above 220°C
120sec Max
3.5
● Recommended Soldering Pad Pattern
* This LED is designed to be reflow soldered on to a PCB. If dip soldered, Nichia cannot guarantee its reliability.
* Reflow soldering must not be performed more than twice. Hand soldering must not be performed more than once.
* Avoid rapid cooling. Ramp down the temperature gradually from the peak temperature.
* Nitrogen reflow soldering is recommended. Air flow soldering conditions can cause optical degradation,
caused by heat and/or atmosphere.
* Since the silicone used in the encapsulating resin is soft, do not press on the encapsulant resin.
Pressure can cause nicks, chip-outs, encapsulant delamination and deformation, and bump breaks, decreasing reliability.
When using automatic pick and place machine, use a pick up nozzle which does not directly apply stress
to the encapsulation of the LEDs.
Recommended conditions:
Using a nozzle designed for the LEDs is recommended. (See Figure below)
* The nozzle must not have any direct contact with the encapsulating resin.
1.9
0.4
0.5
Direct contact with the encapsulating resin may result in internal disconnections causing the LED not to illuminate.
6
NICHIA STS-DA1-3562A <Cat.No.150602>
* Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable,
a double-head soldering iron should be used.
It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
* When soldering, do not apply stress to the LED while the LED is hot.
* The recommended soldering pad pattern is designed for attachment of the LED without problems.
When precise mounting accuracy is required, such as high-density mounting, ensure that the size and shape of the pad
are suitable for the circuit design.
* Consider factors such as the reflow soldering temperature, hand soldering temperature, etc. when choosing the solder.
* When flux is used, it should be a halogen free flux. Ensure that the manufacturing process is not designed in a manner
where the flux will come in contact with the LEDs.
* Make sure that there are no issues with the type and amount of solder that is being used.
* All of the electrode pads are on the backside of this product; solder connections will not be able to be seen nor confirmed
by a normal visual inspection. When using the product, ensure that there are no issues with the soldering conditions.
7
NICHIA STS-DA1-3562A <Cat.No.150602>
TAPE AND REEL DIMENSIONS
テーピング部 Tape
1.75±0.1
2±0.05 4±0.1
5.5±0.05
Cathode Mark
Nxxx119x
STS-DA7-6929
(単位 Unit: mm)
0.35±0.05
3.7±0.1
8±0.1
12+0.3
-0.1
Φ1.5+0.1
-0
管理番号 No.
2.25±0.1
-0
Φ 1.5+0.2
3.7±0.1
エンボスキャリアテープ
Embossed Carrier Tape
トレーラ部/リーダ部 Trailer and Leader
トップカバーテープ
Top Cover Tape
引き出し方向
Feed
Direction
トレーラ部最小160mm(空部)
Trailer 160mm MIN(Empty Pockets)
LED装着部
Loaded Pockets
リーダ部最小400mm
Leader without Top Cover Tape 400mm MIN
リール部 Reel
17.5±1
13.5±1
±2
* 数量は1リールにつき 3500個入りです。
Reel Size: 3500pcs
Φ100±1
8
* JIS C 0806電子部品テーピングに準拠しています。
Φ
Φ
21 ±
0.
13 ±
0.
2
330
ラベル
Label
引き出し部最小100mm(空部)
Leader with Top Cover Tape
100mm MIN(Empty Pocket)
The tape packing method complies with JIS C 0806
(Packaging of Electronic Components on Continuous Tapes).
* 実装作業の中断などでエンボスキャリアテープをリールに巻き取る場合、
エンボスキャリアテープを強く(10N以上)締めないで下さい。
LEDがカバーテープに貼り付く可能性があります。
When the tape is rewound due to work interruptions,
no more than 10N should be applied to
the embossed carrier tape.
The LEDs may stick to the top cover tape.
8
NICHIA STS-DA1-3562A <Cat.No.150602>
PACKAGING - TAPE & REEL
9
NICHIA STS-DA1-3562A <Cat.No.150602>
LOT NUMBERING CODE
Lot Number is presented by using the following alphanumeric code.
YMxxxx - RRR
Y - Year
Year
Y
2014
E
2015
F
2016
G
2017
H
2018
I
2019
J
M - Month
Month
M
Month
M
1
1
7
7
2
2
8
8
3
3
9
9
4
4
10
A
5
5
11
B
6
6
12
C
xxxx-Nichia's Product Number
RRR-Ranking by Color Coordinates, Ranking by Luminous Flux, Ranking by Forward Voltage, Ranking by Color Rendering Index
10
NICHIA STS-DA1-3562A <Cat.No.150602>
DERATING CHARACTERISTICS
NVSx119C
管理番号 No. STS-DA7-6910
周囲温度-許容順電流特性
Ambient Temperature vs
Allowable Forward Current
Derating1
はんだ接合部温度(カソード側)-許容順電流特性
Solder Temperature(Cathode Side) vs
Allowable Forward Current
Derating2
RθJA =10°C/W
RθJA =20°C/W
RθJA =30°C/W
2000
(100, 1800)
(100, 1590)
1500
許容順電流
許容順電流
(0, 1590)
Allowable Forward Current(mA)
2000
(93, 1800)
1000
(100, 795)
500
(100, 530)
0
20
40
60
1000
500
80
100
120
0
20
40
60
80
100
周囲温度
はんだ接合部温度(カソード側)
Ambient Temperature(°C)
Solder Temperature(Cathode Side)(°C)
デューティー比-許容順電流特性
Duty Ratio vs
Allowable Forward Current
Duty
10000
Allowable Forward Current(mA)
1500
0
0
許容順電流
Allowable Forward Current(mA)
(37, 1800)
120
T A =25°C
2400
1800
1000
100
1
10
100
デューティー比
Duty Ratio(%)
11
NICHIA STS-DA1-3562A <Cat.No.150602>
OPTICAL CHARACTERISTICS
NVSW119C
管理番号 No. STS-DA7-6911A
* 本特性は参考です。
All characteristics shown are for reference only and are not guaranteed.
発光スペクトル
Spectrum
TA =25°C
IFP=700mA
Spectrum
1.0
相対発光強度
Relative Emission Intensity(a.u.)
0.8
0.6
0.4
0.2
0.0
350
400
450
500
550
600
650
700
750
波長
Wavelength(nm)
Directivity1
指向特性
Directivity
-10°
0°
TA =25°C
IFP=700mA
10°
-20°
20°
30°
-30°
40°
放射角度
Radiation Angle
-40°
50°
-50°
-60°
60°
70°
-70°
80°
-80°
-90°
90°
1
0.5
0
0.5
1
相対照度
Relative Illuminance(a.u.)
* 本特性は演色性ランクRnnに対応しています。
The graphs above show the characteristics for Rnn LEDs of this product.
12
NICHIA STS-DA1-3562A <Cat.No.150602>
OPTICAL CHARACTERISTICS
NVSW119C
管理番号 No. STS-DA7-6912A
* 本特性は参考です。
All characteristics shown are for reference only and are not guaranteed.
発光スペクトル
Spectrum
TA =25°C
IFP=700mA
Spectrum
1.0
相対発光強度
Relative Emission Intensity(a.u.)
0.8
0.6
0.4
0.2
0.0
350
400
450
500
550
600
650
700
750
波長
Wavelength(nm)
Directivity1
指向特性
Directivity
-10°
0°
TA =25°C
IFP=700mA
10°
-20°
20°
30°
-30°
40°
放射角度
Radiation Angle
-40°
50°
-50°
-60°
60°
70°
-70°
80°
-80°
-90°
90°
1
0.5
0
0.5
1
相対照度
Relative Illuminance(a.u.)
* 本特性は演色性ランクR70に対応しています。
The graphs above show the characteristics for R70 LEDs of this product.
13
NICHIA STS-DA1-3562A <Cat.No.150602>
OPTICAL CHARACTERISTICS
NVSW119C
管理番号 No. STS-DA7-6913A
* 本特性は参考です。
All characteristics shown are for reference only and are not guaranteed.
発光スペクトル
Spectrum
TA =25°C
IFP=700mA
Spectrum
1.0
相対発光強度
Relative Emission Intensity(a.u.)
0.8
0.6
0.4
0.2
0.0
350
400
450
500
550
600
650
700
750
波長
Wavelength(nm)
Directivity1
指向特性
Directivity
-10°
0°
TA =25°C
IFP=700mA
10°
-20°
20°
30°
-30°
40°
放射角度
Radiation Angle
-40°
50°
-50°
-60°
60°
70°
-70°
80°
-80°
-90°
90°
1
0.5
0
0.5
1
相対照度
Relative Illuminance(a.u.)
* 本特性は演色性ランクR8000に対応しています。
The graphs above show the characteristics for R8000 LEDs of this product.
14
NICHIA STS-DA1-3562A <Cat.No.150602>
FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS
NVSW119C
管理番号 No. STS-DA7-6914A
* 本特性は参考です。
All characteristics shown are for reference only and are not guaranteed.
順電圧-順電流特性
Forward Voltage vs
Forward Current
周囲温度-順電圧特性
Ambient Temperature vs
Forward Voltage
VfIf
TA =25°C
TaVf
IFP=700mA
4.0
10000
順電圧
Forward Voltage(V)
順電流
Forward Current(mA)
3.5
2400
1000
700
3.0
2.5
100
2.0
2.0
2.5
3.0
3.5
4.0
-60
-40
順電圧
Forward Voltage(V)
順電流-相対光束特性
Forward Current vs
Relative Luminous Flux
-20
0
20
40
60
80
100 120
周囲温度
Ambient Temperature(°C)
周囲温度-相対光束特性
Ambient Temperature vs
Relative Luminous Flux
IfIv
TA =25°C
TaIv
IFP=700mA
1.4
3.5
相対光束
Relative Luminous Flux(a.u.)
相対光束
Relative Luminous Flux(a.u.)
3.0
2.5
2.0
1.5
1.0
1.2
1.0
0.8
0.5
0.6
-60
0.0
0
500
1000
1500
2000
順電流
Forward Current(mA)
2500
-40
-20
0
20
40
60
80
100 120
3000
周囲温度
Ambient Temperature(°C)
15
NICHIA STS-DA1-3562A <Cat.No.150602>
FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS
NVSW119C
管理番号 No. STS-DA7-6915A
* 本特性は参考です。
All characteristics shown are for reference only and are not guaranteed.
順電流-色度 特性
Forward Current vs
Chromaticity Coordinate
Ifxy
TA =25°C
0.38
100mA
0.37
350mA
0.36
y
700mA
0.35
1800mA
0.34
2400mA
0.33
0.32
0.33
0.34
0.35
0.36
0.37
x
周囲温度-色度 特性
Ambient Temperature vs
Chromaticity Coordinate
Taxy
IFP= 700mA
0.38
0.37
100°C
0.36
y
25°C
0.35
0°C
0.34
-40°C
0.33
0.32
0.33
0.34
0.35
0.36
0.37
x
* 本特性は演色性ランクRnnに対応しています。
The graphs above show the characteristics for Rnn LEDs of this product.
16
NICHIA STS-DA1-3562A <Cat.No.150602>
FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS
NVSW119C
管理番号 No. STS-DA7-6916A
* 本特性は参考です。
All characteristics shown are for reference only and are not guaranteed.
順電流-色度 特性
Forward Current vs
Chromaticity Coordinate
Ifxy
TA =25°C
0.37
100mA
350mA
0.36
y
700mA
0.35
1800mA
0.34
0.33
0.32
2400mA
0.33
0.34
0.35
0.36
x
周囲温度-色度 特性
Ambient Temperature vs
Chromaticity Coordinate
Taxy
IFP= 700mA
0.37
0.36
100°C
y
25°C
0°C
0.35
0.34
0.33
0.32
-40°C
0.33
0.34
0.35
0.36
x
* 本特性は演色性ランクR70に対応しています。
The graphs above show the characteristics for R70 LEDs of this product.
17
NICHIA STS-DA1-3562A <Cat.No.150602>
FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS
NVSW119C
管理番号 No. STS-DA7-6917A
* 本特性は参考です。
All characteristics shown are for reference only and are not guaranteed.
順電流-色度 特性
Forward Current vs
Chromaticity Coordinate
Ifxy
TA =25°C
0.38
y
0.37
0.36
0.35
0.34
0.32
100mA
350mA
700mA
1800mA
2400mA
0.33
0.34
0.35
0.36
x
周囲温度-色度 特性
Ambient Temperature vs
Chromaticity Coordinate
Taxy
IFP= 700mA
0.38
y
0.37
-40°C
0.36
0°C
25°C
0.35
100°C
0.34
0.32
0.33
0.34
0.35
0.36
x
* 本特性は演色性ランクR8000に対応しています。
The graphs above show the characteristics for R8000 LEDs of this product.
18
NICHIA STS-DA1-3562A <Cat.No.150602>
RELIABILITY
(1) Tests and Results
Reference
Test
Standard
Resistance to
Test
Test Conditions
Duration
JEITA ED-4701
Tsld=260°C, 10sec, 2reflows,
300 301
Precondition: 30°C, 70%RH, 168hr
Solderability
JEITA ED-4701
Tsld=245±5°C, 5sec,
(Reflow Soldering)
303 303A
Lead-free Solder(Sn-3.0Ag-0.5Cu)
JEITA ED-4701
-40°C(30min)~25°C(5min)~
100 105
100°C(30min)~25°C(5min)
Moisture Resistance
JEITA ED-4701
25°C~65°C~-10°C, 90%RH,
(Cyclic)
200 203
24hr per cycle
High Temperature
JEITA ED-4701
Storage
200 201
Temperature Humidity
JEITA ED-4701
Storage
100 103
Low Temperature
JEITA ED-4701
Storage
200 202
Soldering Heat
(Reflow Soldering)
Temperature Cycle
Failed/Tested
0/22
#2
0/22
100cycles
#1
0/22
10cycles
#1
0/22
TA=100°C
1000hours
#1
0/22
TA=60°C, RH=90%
1000hours
#1
0/22
TA=-40°C
1000hours
#1
0/22
1000hours
#1
0/22
1000hours
#1
0/22
500hours
#1
0/22
1000hours
#1
0/22
48minutes
#1
0/10
#1
0/22
TA=25°C, IF=1000mA
Operating Life
Test board: See NOTES below
High Temperature
TA=100°C, IF=400mA
Operating Life
Test board: See NOTES below
Temperature Humidity
60°C, RH=90%, IF=700mA
Operating Life
Test board: See NOTES below
Low Temperature
TA=-40°C, IF=700mA
Operating Life
Test board: See NOTES below
Electrostatic Discharges
#
Units
#1
Room Temperature
Vibration
Failure
Criteria
JEITA ED-4701
200m/s2, 100~2000~100Hz,
400 403
4cycles, 4min, each X, Y, Z
JEITA ED-4701
HBM, 2kV, 1.5kΩ, 100pF, 3pulses,
300 304
alternately positive or negative
NOTES:
1) Test board: FR4 board thickness=1.6mm, copper layer thickness=0.07mm, RθJA≈30°C/W
2) Measurements are performed after allowing the LEDs to return to room temperature.
(2) Failure Criteria
Criteria #
#1
#2
Items
Conditions
Failure Criteria
Forward Voltage(VF)
IF=700mA
>Initial value×1.1
Luminous Flux(ΦV)
IF=700mA
<Initial value×0.7
Solderability
-
Less than 95% solder coverage
19
NICHIA STS-DA1-3562A <Cat.No.150602>
CAUTIONS
(1) Storage
Conditions
Storage
Temperature
Humidity
Time
Before Opening Aluminum Bag
≤30°C
≤90%RH
Within 1 Year from Delivery Date
After Opening Aluminum Bag
≤30°C
≤70%RH
≤168hours
65±5°C
-
≥24hours
Baking
● Product complies with JEDEC MSL 3 or equivalent. See IPC/JEDEC STD-020 for moisture-sensitivity details.
● Absorbed moisture in LED packages can vaporize and expand during soldering, which can cause interface delamination
and result in optical performance degradation. Products are packed in moisture-proof aluminum bags
to minimize moisture absorption during transportation and storage.
Included silica gel desiccants change from blue to red if moisture had penetrated bags.
● After opening the moisture-proof aluminum bag, the products should go through the soldering process
within the range of the conditions stated above. Unused remaining LEDs should be stored with silica gel desiccants
in a hermetically sealed container, preferably the original moisture-proof bags for storage.
● After the “Period After Opening” storage time has been exceeded or silica gel desiccants are no longer blue,
the products should be baked. Baking should only be done once.
● Although the leads or electrode pads (anode and cathode) of the product are plated with gold,
prolonged exposure to a corrosive environment might cause the gold plated the leads or electrode pads to tarnish,
and thus leading to difficulties in soldering. If unused LEDs remain, they must be stored in a hermetically sealed container.
Nichia recommends using the original moisture-proof bag for storage.
● Do not use sulfur-containing materials in commercial products. Some materials, such as seals and adhesives, may contain sulfur.
The contaminated plating of LEDs might cause an open circuit. Silicone rubber is recommended as a material for seals.
Bear in mind, the use of silicones may lead to silicone contamination of electrical contacts inside the products,
caused by low molecular weight volatile siloxane.
● To prevent water condensation, please avoid large temperature and humidity fluctuations for the storage conditions.
● Do not store the LEDs in a dusty environment.
● Do not expose the LEDs to direct sunlight and/or an environment where the temperature is higher than
normal room temperature.
(2) Directions for Use
● When designing a circuit, the current through each LED must not exceed the Absolute Maximum Rating.
Operating at a constant current per LED is recommended. In case of operating at a constant voltage, Circuit B is recommended.
If the LEDs are operated with constant voltage using Circuit A, the current through the LEDs may vary due to the variation
in Forward Voltage characteristics of the LEDs.
...
...
● This product should be operated using forward current. Ensure that the product is not subjected to
either forward or reverse voltage while it is not in use. In particular, subjecting it to continuous reverse voltage
may cause migration, which may cause damage to the LED die. When used in displays that are not used for a long time,
the main power supply should be switched off for safety.
● It is recommended to operate the LEDs at a current greater than 10% of the sorting current to stabilize the LED characteristics.
● Ensure that excessive voltages such as lightning surges are not applied to the LEDs.
● For outdoor use, necessary measures should be taken to prevent water, moisture and salt air damage.
20
NICHIA STS-DA1-3562A <Cat.No.150602>
(3) Handling Precautions
● Do not handle the LEDs with bare hands as it will contaminate the LED surface and may affect the optical characteristics:
it might cause the LED to be deformed and/or the bump to break, which will cause the LED not to illuminate.
● When handling the product with tweezers, be careful not to apply excessive force to the resin.
Otherwise, The resin can be cut, chipped, delaminate or deformed, causing bump-bond breaks and catastrophic failures.
● Dropping the product may cause damage.
● Do not stack assembled PCBs together. Failure to comply can cause the resin portion of the product to be cut, chipped,
delaminated and/or deformed. It may cause bump to break, leading to catastrophic failures.
(4) Design Consideration
● PCB warpage after mounting the products onto a PCB can cause the package to break.
The LED should be placed in a way to minimize the stress on the LEDs due to PCB bow and twist.
● The position and orientation of the LEDs affect how much mechanical stress is exerted on the LEDs placed near the score lines.
The LED should be placed in a way to minimize the stress on the LEDs due to board flexing.
● Board separation must be performed using special jigs, not using hands.
● If an aluminum PCB is used, customer is advised to verify the PCB with the products before use.
Thermal stress during use can cause the solder joints to crack.
● Volatile organic compounds that have been released from materials present around the LEDs (e.g. housing, packing,
adhesive, secondary lens, lens cover, etc.) may penetrate the LED lens and/or encapsulating resin.
If the LEDs are being used in a hermetically sealed environment, these volatile compounds can discolor after being exposed
to heat and/or photon energy and it may greatly reduce the LED light output and/or cause a color shift.
In this case, ventilating the environment may improve the reduction in light output and/or color shift.
Perform a light-up test of the chosen application for optical evaluation to ensure that there are no issues,
especially if the LEDs are planned to be used in a hermetically sealed environment.
(5) Electrostatic Discharge (ESD)
● The products are sensitive to static electricity or surge voltage. ESD can damage a die and its reliability.
When handling the products, the following measures against electrostatic discharge are strongly recommended:
Eliminating the charge
Grounded wrist strap, ESD footwear, clothes, and floors
Grounded workstation equipment and tools
ESD table/shelf mat made of conductive materials
● Ensure that tools (e.g. soldering irons), jigs and machines that are being used are properly grounded and
that proper grounding techniques are used in work areas. For devices/equipment that mount the LEDs,
protection against surge voltages should also be used.
● If tools or equipment contain insulating materials such as glass or plastic,
the following measures against electrostatic discharge are strongly recommended:
Dissipating static charge with conductive materials
Preventing charge generation with moisture
Neutralizing the charge with ionizers
● The customer is advised to check if the LEDs are damaged by ESD
when performing the characteristics inspection of the LEDs in the application.
Damage can be detected with a forward voltage measurement or a light-up test at low current (≤1mA).
● ESD damaged LEDs may have current flow at a low voltage or no longer illuminate at a low current.
Failure Criteria: VF<2.0V at IF=0.5mA
21
NICHIA STS-DA1-3562A <Cat.No.150602>
(6) Thermal Management
● Proper thermal management is an important when designing products with LEDs. LED die temperature is affected
by PCB thermal resistance and LED spacing on the board. Please design products in a way that the LED die temperature
does not exceed the maximum Junction Temperature (TJ).
● Drive current should be determined for the surrounding ambient temperature (TA) to dissipate the heat from the product.
● The following equations can be used to calculate the junction temperature of the products.
1) TJ=TA+RθJA・W
2) TJ=TS+RθJS・W
*TJ=LED junction temperature: °C
TA=Ambient temperature: °C
TS=Soldering temperature (cathode side): °C
RθJA=Thermal resistance from junction to ambient: °C/W
RθJS=Thermal resistance from junction to TS measuring point: °C/W
W=Input power(IF×VF): W
(7) Cleaning
● The LEDs should not be cleaned with water, benzine, and/or thinner.
● If required, isopropyl alcohol (IPA) should be used. Other solvents may cause premature failure to the LEDs
due to the damage to the resin portion. The effects of such solvents should be verified prior to use.
In addition, the use of CFCs such as Freon is heavily regulated.
● When dust and/or dirt adheres to the LEDs, soak a cloth with Isopropyl alcohol (IPA), then squeeze it before wiping the LEDs.
● Ultrasonic cleaning is not recommended since it may have adverse effects on the LEDs
depending on the ultrasonic power and how LED is assembled.
If ultrasonic cleaning must be used, the customer is advised to make sure the LEDs will not be damaged prior to cleaning.
(8) Eye Safety
● In 2006, the International Electrical Commission (IEC) published IEC 62471:2006 Photobiological safety of lamps
and lamp systems, which added LEDs in its scope.
On the other hand, the IEC 60825-1:2007 laser safety standard removed LEDs from its scope.
However, please be advised that some countries and regions have adopted standards
based on the IEC laser safety standard IEC 60825-1:20112001, which still includes LEDs in its scope.
Most of Nichia's LEDs can be classified as belonging into either the Exempt Group or Risk Group 1.
High-power LEDs, that emit light containing blue wavelengths, may be classified as Risk Group 2.
Please proceed with caution when viewing directly any LEDs driven at high current, or viewing LEDs
with optical instruments which may greatly increase the damages to your eyes.
● Viewing a flashing light may cause eye discomfort. When incorporating the LED into your product,
please be careful to avoid adverse effects on the human body caused by light stimulation.
(9) Others
● The LEDs described in this brochure are intended to be used for ordinary electronic equipment (such as office equipment,
communications equipment, measurement instruments and household appliances).
Consult Nichia's sales staff in advance for information on the applications in which exceptional quality
and reliability are required, particularly when the failure or malfunction of the LEDs may directly jeopardize life or
health (such as for airplanes, aerospace, submersible repeaters, nuclear reactor control system, automobiles,
traffic control equipment, life support systems and safety devices).
● The customer shall not reverse engineer by disassembling or analysis of the LEDs without having prior written consent
from Nichia. When defective LEDs are found, the customer shall inform Nichia directly before disassembling or analysis.
● The specifications and appearance of this product may change without notice;
Nichia does not guarantee the contents of this specification. Both the customer and Nichia
will agree on the official specifications of supplied products before the volume production of a program begins.
22
Similar pages