FS14NS Surface Mount Schottky Rectifier Reverse Voltage 40V Forward Current 1A Features • • • • • • • • Super Low VF Schottky barrier diodes Very low profile - typical height of 1.0 mm Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 AEC-Q101 qualified High temperature soldering guaranteed: 260℃/10 seconds Halogen-free according to IEC 61249-2-21 definition eSGA (SOD‐123FL) Typical Applications For use of fast swiching in RF module, lighting, cellular phone, portable device, power supplies and other consumer applications. Maximum Ratings (TA = 25 °C unless l otherwise th i noted) t d) Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction temperature range Symbol FS14NS Unit VRRM VRMS VDC IF(AV) 40 28 40 1.0 V V V A IFSM 25 A TJ -55 to +125 °C TSTG - 55 to + 150 °C Storage temperature range Electrical Characteristics Parameter Test Conditions Symbol Instantaneous forward voltage 0.5A,TA=25℃ 1 A ,TA=25℃ Reverse current at rated DC TA=25℃ blocking voltage TA=100℃ Typical junction capacitance 4.0 V, 1 MHz Typical thermal resistance (TA = 25 °C unless otherwise noted) 1) juntion to ambient juntion to case juntion to mount VF IR Typ. Max Unit 0.43 - 0.52 Volts - 0.50 - 30 CJ 46 RθJA RθJC RθJM 95 mA pF 60 ℃/W 30 Note:1),The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB www.goodark.com 1/4 2014.04-Rev.A FS14NS Surface Mount Schottky Rectifier Reverse Voltage 40V Forward Current 1A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current Figure 1.Forward Current Derating Curve Figure 3. Typical Reverse Characteristics Figure 4. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance www.goodark.com 2/4 2014.04-Rev.A FS14NS Surface Mount Schottky Rectifier Reverse Voltage 40V Forward Current 1A Package Outline Dimensions in inches (millimeters) Unit: mm DIM Unit: inch MIN MAX MIN MAX A 00.99 11.08 08 0.035 0 035 0.043 0 043 A1 0 0.1 0.000 0.004 B 0.85 1.05 0.033 0.041 C 0.1 0.25 0.004 0.010 D 1.7 2 0.067 0.079 E 2.9 3.1 0.114 0.122 L 0.43 0.83 0.017 0.033 HE 3.5 3.9 0.138 0.154 Soldering footprint Packing Information Packing quantities: 3000 pcs/Reel, 40 Reels/Box; 8mm Tape, 7" Reel Tape & Reel Specification www.goodark.com 3/4 2014.04-Rev.A FS14NS Surface Mount Schottky Rectifier Reverse Voltage 40V Forward Current 1A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, rights or any other rights, rights belonging to Suzhou Good-Ark Good Ark Electronics Co., Co Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou GoodArk Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies inacc racies or typographical t pographical errors. errors Suzhou S ho Good-Ark Good Ark Electronics Co., Co Ltd. Ltd assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce d in i whole h l or in i partt these th materials. t i l Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.04-Rev.A