ON MC100LVEP05 2.5v / 3.3v ecl 2-input differential and/nand Datasheet

MC100LVEP05
2.5V / 3.3V ECL 2-Input
Differential AND/NAND
Description
The MC100LVEP05 is a 2-input differential AND/NAND gate.
The MC100LVEP05 is the low voltage version of the MC100EP05
and is functionally equivalent to the EL05 and LVEL05 devices. With
AC performance much faster than the LVEL05 device, the
MC100LVEP05 is ideal for low voltage applications requiring the
fastest AC performance available.
The 100 Series contains temperature compensation.
http://onsemi.com
MARKING DIAGRAMS*
8
8
1
Features
•220 ps Typical Propagation Delay
•Input Clock Frequency > 3 GHz
•0.2 ps Typical RMS Random Clock Period Jitter
•LVPECL Mode Operating Range: VCC = 2.375 V to 3.6 V
TSSOP-8
DT SUFFIX
CASE 948R
with VEE = 0 V
•NECL Mode Operating Range: VCC = 0 V
with VEE = -2.375 V to -3.6 V
•Open Input Default State
•Q Output Will Default LOW with Inputs Open
•These are Pb-Free Devices*
1
KU05
ALYWG
G
1
DFN8
MN SUFFIX
CASE 506AA
K
M
A
L
= MC100
= Date Code
= Assembly Location
= Wafer Lot
4
6N MG
G
Y = Year
W = Work Week
G = Pb-Free Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
*For additional information on our Pb-Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2007
May, 2007 - Rev. 0
1
Publication Order Number:
MC100LVEP05/D
MC100LVEP05
Table 1. PIN DESCRIPTION
D0
D0
D1
1
8
2
7
6
3
Pin
VCC
Q
Function
D0*, D1*, D0**, D1**
ECL Data Inputs
Q, Q
ECL Data Outputs
VCC
Positive Supply
VEE
Negative Supply
EP
Exposed pad must be connected to a
sufficient thermal conduit. Electrically
connect to the most negative supply
or leave floating open.
Q
* Pins will default LOW when left open.
**Pins will default to VCC/2when left open.
D1
4
5
VEE
Table 2. TRUTH TABLE
Figure 1. 8-Lead Pinout (Top View) and Logic
Diagram
D0
D1
D0
D1
Q
Q
L
L
H
H
L
H
L
H
H
H
L
L
H
L
H
L
L
L
L
H
H
H
H
L
Table 3. ATTRIBUTES
Characteristics
Value
Internal Input Pulldown Resistor
75 kW
Internal Input Pullup Resistor
37.5 kW
ESD Protection
Human Body Model
Machine Model
Charged Device Model
Moisture Sensitivity, Indefinite Time Out of Drypack (Note 1)
TSSOP-8
DFN8
Flammability Rating
Oxygen Index: 28 to 34
Transistor Count
> 4 kV
> 200 V
> 2 kV
Pb Pkg
Level 1
Level 1
Pb-Free Pkg
Level 3
Level 1
UL 94 V-0 @ 0.125 in
167 Devices
Meets or exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
1. For additional information, see Application Note AND8003/D.
http://onsemi.com
2
MC100LVEP05
Table 4. MAXIMUM RATINGS
Rating
Unit
VCC
Symbol
PECL Mode Power Supply
Parameter
VEE = 0 V
Condition 1
Condition 2
6
V
VEE
NECL Mode Power Supply
VCC = 0 V
-6
V
VI
PECL Mode Input Voltage
NECL Mode Input Voltage
VEE = 0 V
VCC = 0 V
6
-6
V
V
Iout
Output Current
Continuous
Surge
50
100
mA
mA
TA
Operating Temperature Range
-40 to +85
°C
Tstg
Storage Temperature Range
-65 to +150
°C
qJA
Thermal Resistance (Junction-to-Ambient)
0 lfpm
500 lfpm
TSSOP-8
TSSOP-8
185
140
°C/W
°C/W
qJC
Thermal Resistance (Junction-to-Case)
Standard Board
TSSOP-8
41 to 44
°C/W
qJA
Thermal Resistance (Junction-to-Ambient)
0 lfpm
500 lfpm
DFN8
DFN8
129
84
°C/W
°C/W
Tsol
Wave Solder
3 sec @ 260°C
265
°C
VI VCC
VI VEE
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
Table 5. 100EP DC CHARACTERISTICS, PECL VCC = 2.5 V, VEE = 0 V (Note 2)
-40 °C
Symbol
Characteristic
25°C
85°C
Min
Typ
Max
Min
Typ
Max
Min
Typ
Max
Unit
15
25
32
17
27
36
19
28
38
mA
1355
1480
1605
1355
1480
1605
1355
1480
1605
mV
730
730
730
IEE
Power Supply Current
VOH
Output HIGH Voltage (Note 3)
VOL
Output LOW Voltage (Note 3)
555
900
555
900
555
900
mV
VIH
Input HIGH Voltage (Single-Ended)
1355
1620
1355
1620
1355
1620
mV
VIL
Input LOW Voltage (Single-Ended)
555
900
555
900
555
900
mV
VIHCMR
Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Notes 4, 5)
1.2
2.5
1.2
2.5
1.2
2.5
V
IIH
Input HIGH Current
150
mA
IIL
Input LOW Current
150
D
D
0.5
-150
150
0.5
-150
0.5
-150
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
2. Input and output parameters vary 1:1 with VCC. VEE can vary +0.125 V to -1.3 V.
3. All loading with 50 W to VCC - 2.0 V.
4. Single-ended input CLK pin operation is limited to VCC 3.0 V in PECL mode.
5. VIHCMR min varies 1:1 with VEE, VIHCMR max varies 1:1 with VCC. The VIHCMR range is referenced to the most positive side of the differential
input signal.
http://onsemi.com
3
MC100LVEP05
Table 6. 100EP DC CHARACTERISTICS, PECL VCC = 3.3 V, VEE = 0 V (Note 6)
-40 °C
Symbol
Characteristic
25°C
85°C
Min
Typ
Max
Min
Typ
Max
Min
Typ
Max
Unit
15
25
32
17
27
36
19
28
38
mA
IEE
Power Supply Current
VOH
Output HIGH Voltage (Note 7)
2155
2280
2405
2155
2280
2405
2155
2280
2405
mV
VOL
Output LOW Voltage (Note 7)
1355
1530
1700
1355
1530
1700
1355
1530
1700
mV
VIH
Input HIGH Voltage (Single-Ended)
2075
2420
2075
2420
2075
2420
mV
VIL
Input LOW Voltage (Single-Ended)
1355
1675
1355
1675
1355
1675
mV
VIHCMR
Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 8)
1.2
3.3
1.2
3.3
1.2
3.3
V
IIH
Input HIGH Current
150
mA
IIL
Input LOW Current
150
D
D
0.5
-150
150
0.5
-150
0.5
-150
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
6. Input and output parameters vary 1:1 with VCC. VEE can vary +0.3 V to -2.2 V.
7. All loading with 50 W to VCC - 2.0 V.
8. VIHCMR min varies 1:1 with VEE, VIHCMR max varies 1:1 with VCC. The VIHCMR range is referenced to the most positive side of the differential
input signal.
http://onsemi.com
4
MC100LVEP05
Table 7. 100EP DC CHARACTERISTICS, NECL VCC = 0 V, VEE = -2.375 V to -3.6 V (Note 9)
-40 °C
Symbol
Characteristic
25°C
85°C
Min
Typ
Max
Min
Typ
Max
Min
Typ
Max
Unit
15
25
32
17
27
36
19
28
38
mA
IEE
Power Supply Current
VOH
Output HIGH Voltage (Note 10)
-1 145
-1020
-895
-1 145
-1020
-895
-1 145
-1020
-895
mV
VOL
Output LOW Voltage (Note 10)
-1945
-1770
-1600
-1945
-1770
-1600
-1945
-1770
-1600
mV
VIH
Input HIGH Voltage (Single-Ended)
-1 165
-880
-1 165
-880
-1 165
-880
mV
VIL
Input LOW Voltage (Single-Ended)
-1945
-1600
-1945
-1600
-1945
-1600
mV
VIHCMR
Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 11)
0.0
V
IIH
Input HIGH Current
150
mA
IIL
Input LOW Current
VEE+1.2
0.0
VEE+1.2
0.0
150
D
D
0.5
-150
VEE+1.2
150
0.5
-150
mA
0.5
-150
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
9. Input and output parameters vary 1:1 with VCC.
10. All loading with 50 W to VCC - 2.0 V.
11. VIHCMR min varies 1:1 with VEE, VIHCMR max varies 1:1 with VCC. The VIHCMR range is referenced to the most positive side of the differential
input signal.
Table 8. AC CHARACTERISTICS VCC = 0 V; VEE = -2.375 V to -3.6 V or VCC = 2.375 V to 3.6 V; VEE = 0 V (Note 12)
-40 °C
Symbol
Min
Characteristic
fmax
Maximum Frequency
(Figure 2)
3.0
tPLH,
tPHL
Propagation Delay to
Output Differential
160
tJITTER
RMS Random Clock Jitter fin (Figure 2)
VPP
Input Voltage Swing
(Differential Configuration)
tr
tf
Output Rise/Fall Times
(20% - 80%)
Max
Min
Typ
85°C
Max
3.0
210
260
0.2
1
150
800
1200
70
120
170
3.0 GHz
Q
Typ
25°C
170
Min
Typ
Max
3.0
220
270
0.2
1
150
800
1200
80
130
180
210
Unit
GHz
260
320
ps
0.2
1.5
ps
150
800
1200
mV
100
150
200
ps
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
12. Measured using a 750 mV source, 50% duty cycle clock source. All loading with 50 W to VCC - 2.0 V.
http://onsemi.com
5
MC100LVEP05
10
VOUTamplitude (mVpp)
850
9
750
8
3.3 V
7
650
6
550
5
4
450
3
2
350
1
250
1.0
0
1.5
2.0
2.5
FREQUENCY (GHz)
3.0
Figure 2. Fmax @ 255C
Q
Zo = 50 W
D
Receiver
Device
Driver
Device
Q
Zo = 50 W
D
50 W
50 W
VTT
VTT = VCC - 2.0 V
Figure 3. Typical Termination for Output Driver and Device Evaluation
(See Application Note AND8020/D - Termination of ECL Logic Devices.)
http://onsemi.com
6
MC100LVEP05
ORDERING INFORMATION
Package
Shipping†
MC100LVEP05DTG
TSSOP-8
(Pb-Free)
100 Units / Rail
MC100LVEP05DTR2G
TSSOP-8
(Pb-Free)
2500 / Tape & Reel
MC100LVEP05MNTXG
DFN8
(Pb-Free)
1000 / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
Resource Reference of Application Notes
AN1405/D
-
ECL Clock Distribution Techniques
AN1406/D
-
Designing with PECL (ECL at +5.0 V)
AN1503/D
-
ECLinPSt I/O SPiCE Modeling Kit
AN1504/D
-
Metastability and the ECLinPS Family
AN1568/D
-
Interfacing Between LVDS and ECL
AN1672/D
-
The ECL Translator Guide
AND8001/D
-
Odd Number Counters Design
AND8002/D
-
Marking and Date Codes
AND8020/D
-
Termination of ECL Logic Devices
AND8066/D
-
Interfacing with ECLinPS
AND8090/D
-
AC Characteristics of ECL Devices
http://onsemi.com
7
MC100LVEP05
PACKAGE DIMENSIONS
TSSOP-8
DT SUFFIX
PLASTIC TSSOP PACKAGE
CASE 948R-02
ISSUE A
8x
0.15 (0.006) T U
K REF
0.10 (0.004)
S
2X
L/2
8
1
PIN 1
IDENT
S
T U
V
S
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A DOES NOT INCLUDE MOLD FLASH.
PROTRUSIONS OR GATE BURRS. MOLD FLASH
OR GATE BURRS SHALL NOT EXCEED 0.15
(0.006) PER SIDE.
4. DIMENSION B DOES NOT INCLUDE INTERLEAD
FLASH OR PROTRUSION. INTERLEAD FLASH OR
PROTRUSION SHALL NOT EXCEED 0.25 (0.010)
PER SIDE.
5. TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
6. DIMENSION A AND B ARE TO BE DETERMINED
AT DATUM PLANE -W-.
S
5
0.25 (0.010)
B
-U-
L
0.15 (0.006) T U
M
M
4
A
-V-
F
DETAIL E
C
0.10 (0.004)
-T-
SEATING
PLANE
D
-WG
DETAIL E
http://onsemi.com
8
DIM
A
B
C
D
F
G
K
L
M
MILLIMETERS
MIN
MAX
2.90
3.10
2.90
3.10
0.80
1.10
0.05
0.15
0.40
0.70
0.65 BSC
0.25
0.40
4.90 BSC
0_
6_
INCHES
MIN
MAX
0.114
0.122
0.114
0.122
0.031
0.043
0.002
0.006
0.016
0.028
0.026 BSC
0.010
0.016
0.193 BSC
0_
6_
MC100LVEP05
PACKAGE DIMENSIONS
DFN8
CASE 506AA-01
ISSUE D
D
A
NOTES:
1. DIMENSIONING AND TOLERANCING
PER ASME Y14.5M, 1994 .
2. CONTROLLING DIMENSION:
MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED
TERMINAL AND IS MEASURED
BETWEEN 0.25 AND 0.30 MM FROM
TERMINAL.
4. COPLANARITY APPLIES TO THE
EXPOSED PAD AS WELL AS THE
TERMINALS.
B
PIN ONE
REFERENCE
2X
0.10 C
2X
ÇÇÇÇ
ÇÇÇÇ
ÇÇÇÇ
0.10 C
E
DIM
A
A1
A3
b
D
D2
E
E2
e
K
L
TOP VIEW
A
0.10 C
MILLIMETERS
MIN
MAX
0.80
1.00
0.00
0.05
0.20 REF
0.20
0.30
2.00 BSC
1.10
1.30
2.00 BSC
0.70
0.90
0.50 BSC
0.20
--0.25
0.35
8X
0.08 C
SEATING
PLANE
(A3)
SIDE VIEW
A1
C
D2
e
e/2
4
1
8X
L
E2
K
8
5
8X
b
0.10 C A B
0.05 C
NOTE 3
BOTTOM VIEW
ECLinPS is a trademark of Semiconductor Components Industries, LLC (SCILLC).
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer
purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800-282-9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81-3-5773-3850
http://onsemi.com
9
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MC100LVEP05/D
Similar pages