ZETTLER AZ6963-1CE-48D 10 amp subminiature power relay Datasheet

AZ6963
10 AMP SUBMINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
•
High sensitivity, 120 mW pickup
Dielectric strength 5000 Vrms
Isolation spacing greater than 10 mm
Proof tracking index (PTI/CTI) 250
10 Amp switching capability
Epoxy sealed version available
Reinforced insulation, EN 60730-1 (VDE 0631, part 1)
EN 60335-1 (VDE 0700, part 1)
• UL, CUR file E43203
• VDE file 40021878
GENERAL DATA
CONTACTS
Arrangement
SPDT (1 Form C), DPDT (2 Form C)
SPST (1 Form A)
Ratings
Resistive load:
Max. switched power: 240 W or 2500 VA
(2 Form C: 150 W or 1250 VA)
Max. switched current: 10 A
(2 Form C: 5 A)
Max. switched voltage: 240 VDC* or 440 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Rated Load
UL, CUR
VDE
10 A at 250 VAC resistive
10 A at 30 VDC resistive
2 Form C:
5 A at 250 VAC resistive
8 A at 250 VAC resistive
10 A at 250 VAC resistive
(1 Form C)
(1 Form A)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 8 A 250 VAC res.
Operate Time (typical)
7 ms at nominal coil voltage
Release Time (typical)
3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.) 2500 Vrms between contact sets
1000 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Insulation
(according to
DIN VDE 0110,
IEC 60664-1)
C250
Overvoltage category: III
Pollution degree: 3
Nominal voltage: 250 VAC
Dropout
Greater than 10% of nominal coil voltage
Material
Silver tin oxide or silver nickel,
gold plating available.
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 105°C (221°F)
Resistance
< 100 milliohms initially
Vibration
Break Contact: 5 g at 10 …500 Hz
Make Contact: 20 g at 10…500 Hz
Shock
10 g
Enclosure
P.B.T. polyester, UL94 V-O
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
8 grams
Packing unit in pcs
20 per plastic tube / 1000 per carton box
COIL
Power
At Pickup Voltage
(typical)
120 mW (up to 24 VDC coil)
140 mW (48 VDC and 60 VDC coil)
Max. Continuous
Dissipation
1.2 W at 20°C (68°F) ambient
Temperature Rise
20°C (36°F) at nominal coil voltage
Temperature
Max. 130°C (266°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
ZETTLER
electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
[email protected]
www.ZETTLERelectronics.com
2007-08-28
AZ6963
RELAY ORDERING DATA
COIL SPECIFICATIONS
ORDER NUMBER*
Nominal Coil
VDC
5
Must Operate
VDC
3.5
Max. Continuous
VDC
11.6
6
4.2
14.0
9
6.3
20.8
12
8.4
18
24
48
Coil Resistance
Ohm
113 ± 10%
1 Form A
(SPST-NO)
AZ6963–1AE–5D
1 Form C
(SPDT)
AZ6963–1CE–5D
164 ± 10%
AZ6963–1AE–6D
AZ6963–1CE–6D
360 ± 10%
AZ6963–1AE–9D
AZ6963–1CE–9D
27.2
620 ± 10%
AZ6963–1AE–12D
AZ6963–1CE–12D
12.6
39.4
1,295 ± 10%
AZ6963–1AE–18D
AZ6963–1CE–18D
16.8
53.1
2,350 ± 10%
AZ6963–1AE–24D
AZ6963–1CE–24D
33.6
98.0
8,000 ± 15%
AZ6963–1AE–48D
AZ6963–1CE–48D
*Suffix “E” at “1AE” or “1CE” indicates silver tin oxide contacts. Substitute suffix “B” in place of “E” at “1AE” or “1CE” for silver nickel contacts.
Substitute “2C” in place of “1C” for 2 Form C relay.
Add suffix “E” at the end of order number for sealed version. Add suffix “A” at the end of order number for gold plated contacts.
MECHANICAL DATA
Coil Temperature Rise
FORM A VERSION
1.134 max
[28.8 max]
1.134 max
[28.8 max]
.398
[10.1]
.398
[10.1]
.492
[12.5]
.012
[0.3]
.492
[12.5]
.012
[0.3]
.142
[3.6]
2 x ø .020
[ø 0.5]
3 x .016
[0.4]
2 x ø .020
[ø 0.5]
.142
[3.6]
2 x .016
[0.4]
3 x .031
[0.8]
*
Coil Temperature Rise °C
FORM C VERSION
2 x .031
[0.8]
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
0
10A
0A
60% 80% 100% 120% 140% 160% 180% 200% 220%
*
Percent of Nominal Coil Voltage at 20°C
*
* Not used on 1 Form C relay
PC BOARD LAYOUT
5 x ø .051
[ø 1.3]
.300
[7.62]
CIRCUIT DIAGRAM
.062
[1.57]
.870
[22.1]
1
.050
[1.3]
1 FORM C
Maximum Switching Capacity
4
(1 Form A and 1 Form C)
1 FORM C
10.0
3
2
4
.062
[1.57]
8
7
6
.3
.2
.050
[1.3]
VIEWED TOWARD TERMINALS
4
5
VIEWED TOWARD TERMINALS
1000
3
400
500
600
700
800
900
2
300
.126
[3.2]
200
.1
.126
[3.2]
100
2 FORM C
50
60
70
80
90
2 FORM C
.9
.8
.7
.6
.5
.4
1
.300
[7.62]
1.0
40
.744
[18.9]
AC Resistive
Load
30
8 x ø .051
[ø 1.3]
1 FORM A
20
.198
[5.04]
3.0
3
2.0
.050
[1.3]
1 FORM A
DC Resistive
Load
4.0
.116
[2.95]
.744
[18.9]
1
.300
[7.62]
9.0
8.0
7.0
6.0
5.0
5
CURRENT
4 x ø .051
[ø 1.3]
2
.126
[3.2]
10
.126
[3.2]
VOLTAGE
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
ZETTLER
electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
[email protected]
www.ZETTLERelectronics.com
2007-08-28
Similar pages