Panasonic EXBE10C103J Chip resistor network Datasheet

Chip Resistor Networks
Chip Resistor Networks
Type: EXBD
EXBE
EXBA
EXBQ
Features
●
●
●
●
High density placing for digital signal circuits
· Bussed 8 or 15 resistors for pull up/down circuits
EXBD: 3.2 mm × 1.6 mm × 0.55 mm, 0.635 mm pitch
EXBE: 4.0 mm × 2.1 mm × 0.55 mm, 0.8 mm pitch
EXBA: 6.4 mm × 3.1 mm × 0.55 mm, 1.27 mm pitch
EXBQ: 3.8 mm × 1.6 mm × 0.45 mm, 0.5 mm pitch
· Available direct placing on the bus line by means of half pitch spacing without through-holes on PWB
(“High density placing” is shown below)
High speed mounting using conventional placing machine
Reference Standard…IEC 60115-9, JIS C 5201-9, EIAJ RC-2130
RoHS compliant
[High density placing]
Pull up resistors
Direct placement on the bus line
VCC
EXBE10C
EXBA10P
VCC
VCC
IC
IC
IC
IC
IC
IC
No through hole
Through holes
0.4 mm pitch
0.635 mm pitch
■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
Product Code
Thick Film
Resistor
Network
1
2
3
4
5
6
7
8
9
10
11
E
X
B
E
1
0
C
1
0
3
J
Dimension Code of
Chip Resistor Network
Code
D
E
A
Q
Inch
1206
1608
2512
1506
Dimensions
3.2 mm×1.6 mm
4.0 mm×2.1 mm
6.4 mm×3.1 mm
3.8 mm×1.6 mm
Number of
Terminals
10(EXBD,E,A)
16(EXBQ)
Circuit Configuration
Code
C
P
P
E
Common Terminal Position
Center common circuit
(EXBD, EXBE)
Diagonal common circuit
(Terminal 5 and Terminal 10)
(EXBA)
One side common circuit
(Terminal 16)
(EXBQ)
Diagonal common circuit
(Terminal 1 and Terminal 6)
(EXBA)
Resistance Value
The first two digits are
significant figures of
resistance value and
the third one denotes
the number of zeros
following.
Resistance
Tolerance
±5 %
J
12
Suffix for Special
Requirements
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
Chip Resistor Networks
Construction (Example : EXBD)
Protective coating
Protective coating
Electrode
(Inner)
Alumina substrate
Electrode (Outer)
Thick film
resistive element
Electrode (Between)
Electrode (Inner)
Alumina substrate
Thick film
resistive element
Dimensions in mm (not to scale)
0.35±0.15
0.35±0.15
0.55±0.10
1.27±0.10
6.4±0.2
472
1.6±0.2
3.1±0.2
I03
0.5±0.1
0.55±0.10
0.5±0.2
0.35±0.20
EXBA10P
0.45±0.10
3.8±0.2
EXBA10E
0.30±0.15
0.4±0.2
I03
0.15 +0.15
–0.05
0.3±0.1
0.15 +0.15
–0.05
0.8±0.1
4.0±0.2
0.3±0.2 0.3±0.2
0.25±0.20
0.25±0.20
0.5±0.2
0.35±0.20
I03
f0.3 +0.1
–0.2
0.5±0.2 0.5±0.2
0.25±0.10
0.40±0.15
0.3±0.1
0.25±0.10
0.55±0.10
0.3±0.2
0.5±0.2
0.635±0.10
3.20±0.15
0.2±0.1
0.40±0.15
0.2±0.1
1.60±0.15
0.3±0.2
EXBQ
0.2±0.1
0.4±0.2
0.4±0.2
0.2±0.1
EXBA
0.7±0.2
0.25±0.15
EXBE
0.5±0.2
f0.3 +0.1
–0.2
2.1±0.2
EXBD
0.33±0.15
f0.2±0.1
0.2±0.1
0.15 +0.20
–0.05
I03
Mass (Weight)[1000 pcs.] : 10 g Mass (Weight)[1000 pcs.] : 16 g Mass (Weight)[1000 pcs.] : 40 g Mass (Weight)[1000 pcs.] : 9 g
Circuit Configuration
EXBD, EXBE
EXBA
10
9
8
7
1
EXBQ
EXBA10E
EXBA10P
10
9
8
7
6
10
9
8
7
6
16 15 14 13 12 11 10 9
1
2
3
4
5
1
2
3
4
5
1
6
2
3
4
5
2
3 4
5
6
7
8
Ratings
Item
Series
Resistance Range
Resistance Tolerance
Number of Terminals
Number of Resistors
Power Rating at 70 °C
(1)
Limiting Element Voltage
(2)
Maximum Overload Voltage
T. C. R.
Category Temperature Range
Specifications
EXBE
EXBA
47 Ω to 1 MΩ (E12)
±5%
10 terminals
8 element
0.05 W/element
0.063 W/element
25V
50 V
50 V
100 V
–6
±200 × 10 / °C
–55 °C to +125 °C
EXBD
EXBQ
100 Ω to 470 kΩ (E6 series)
16 terminals
15 element
0.025 W/element
25V
50 V
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
Rated Load (%)
(1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Value, or Limiting Element Voltage
listed above, whichever less.
(2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determinedfrom SOTV=2.5 × RCWV✽ or Maximum Overload Voltage listed above
whichever less.
100
–55 °C
70 °C
80
60
40
20
125 °C
0
–60 –40 –20 0 20 40 60 80 100120140160180
Ambient Temperature (°C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
Similar pages