CDE FCA Acrylic stacked metallized film capacitors for filtering and noise attenuation Datasheet

Type FCA Acrylic Surface Mount Film Capacitors
Acrylic Stacked Metallized Film Capacitors for Filtering and Noise Attenuation
Type FCA acrylic film chips are non-inductive
stacked metallized film capacitors which
feature large capacitance values in standard
surface mount case sizes.
Highlights
•
•
•
•
•
Smallest film chips
No piezoelectric effect
Non-polarized, non-magnetic
Low ESR
1.0 µF/10V in 1206 case
Filtering • Decoupling • Noise Attenuation • Distortion Free Audio
Type FCA acrylic film capacitors offer high
capacitance values in standard surface mount
case sizes. They excel in attenuating DC power
bus noise, and as ripple filters in dc to dc power
conversion circuits. As coupling capacitors in
audio circuits, they yield distortion free sound
and better high frequency filtering. The 1.0
µF 10 Vdc rating offers a film capacitor that
is a direct replacement for tantalum “A” case
capacitors. The nonpolar FCA capacitor has
lower ESR and lower DCL than an equivalent
tantalum capacitor, and in high frequency
applications it takes a tantalum capacitor with
ten times the capacitance to perform as well
as the FCA capacitor.
The capacitor is constructed of noninductive
stacked layers of metallized acrylic resin film
with lead free solder (Sn/Ag/Cu) plated copper
alloy terminals.
Specifications
Capacitance Range:
Capacitance Tolerance:
Rated Voltage:
AC Voltage Rating:
Operating Temperature Range:
Dissipation Factor:
Dielectric Strength:
Insulation Resistance (IR):
0.10 µF to 1.0 µF
±20% @ 1 kHz and +20 ºC
16 Vdc [1.0 µF in 1206 case, 10 Vdc]
12 Vrms
–40 ºC to +85 ºC
0.015 @ 1 kHz and +20 ºC
175% of rated voltage for 5 seconds
After 1 minute @10 Vdc; +20 ºC
IR >1000 MΩ (C ≤0.33 µF)
IR > 300 MΩ•µF (C >0.33 µF)
Resistance to Soldering: The capacitor can withstand being heated in
an oven at 235 ºC for 200 seconds
RoHS Compliant
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type FCA Acrylic Surface Mount Film Capacitors
Specifications
Life Test:
Moisture Resistance:
After 500 hours with rated voltage applied at +40 ºC and
90 to 95% RH, the capacitor will meet the following limits:
∆C = +20/–3% of the initial measured value
DF ≤2.25% (at 1 kHz)
IR > 100MΩ (C ≤0.33 µF)
IR > 30MΩ•µF(C > 0.33 µF)
Dielectric Strength: Capacitor will withstand 130%
of the rated voltage for 1 minute.
Apply 125% of the rated DC working voltage at 85 ºC
for 1000 hours, and then stabilize them to +20 ºC.
Capacitors will meet the following limits:
C = +7%/–20% of the initial measured value
DF ≤1.65% (at 1 kHz)
IR > 300MΩ (C ≤0.33 µF)
IR > 100MΩ•µF(C > 0.33 µF)
Ratings
Maximum Current
Catalog Part
Capacitance
Number
(µF)
dv/dt
10kHz
20kHz
50kHz
100kHz
200kHz
500kHz
1MHz
(V/µs) (Arms)
(Arms)
(Arms)
(Arms)
(Arms)
(Arms)
(Arms)
1.05
1.220
1.35
1.43
1.43
10 Vdc
1.00
FCA1206A105M-H3
3
0.60
0.76
16 Vdc
.10
FCA0805C104M-J2
19
0.15
0.21
0.3
0.375
0.46
0.58
0.65
.15
FCA1206C154M-H1
15
0.21
0.28
0.37
0.450
0.54
0.62
0.68
.22
FCA1206C224M-H1
13
0.25
0.33
0.45
0.550
0.66
0.76
0.84
.33
FCA1206C334M-H2
10
0.35
0.45
0.61
0.740
0.84
0.94
1.00
.47
FCA1206C474M-H3
7
0.39
0.52
0.71
0.860
1.00
1.10
1.17
.68
FCA1206C684M-H3
5
0.48
0.625
0.85
1.040
1.19
1.31
1.34
1.00
FCA1210C105M-G2
3
0.60
0.78
1.05
1.250
1.38
1.46
1.46
H
S
Outline Drawing
Outline Dimensions
Part Number
Case
Suffix
Code
Inches
L
W
Millmeters
H
S
L
W
(±.008in.) (±.008in.) (±.008in.) (±.012in.) (±0.2mm) (±0.2mm) (±0.2mm) (±0.3mm)
J2
0805
0.079
0.049
0.039
0.018
2.0
1.25
1.0
0.45
H1
1206
0.126
0.063
0.032
0.026
3.2
1.60
0.8
0.65
H2
1206
0.126
0.063
0.039
0.026
3.2
1.60
1.0
0.65
H3
1206
0.126
0.063
0.055
0.026
3.2
1.60
1.4
0.65
G2
1210
0.126
0.098
0.055
0.026
3.2
2.50
1.4
0.65
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type FCA Acrylic Surface Mount Film Capacitors
Temperature Characteristics
Frequency Characteristics
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type FCA Acrylic Surface Mount Film Capacitors
Typical Applications
Coupling Capacitor for Audio:
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type FCA Acrylic Surface Mount Film Capacitors
Typical Applications
Filtering Performance:
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the
“Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming
and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at
the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without
any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain
applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of
operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute
any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any
guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation,
or operating environment. The Information is intended for use only by customers who have the requisite experience and capability
to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided
by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell
Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier
strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light
of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high
degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not
result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed,
the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety
measures may not be required.
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Similar pages