Abracon AWSCR-3.58MGD-T4 7.4 x 3.4 x 1.8mm built-in capacitance ce ramic resonator Datasheet

7.4 x 3.4 x 1.8mm BUILT-IN CAPACITANCE CERAMIC RESONATOR
AWSCR-MGD
Obselete/End of Life Date: 10/26/2016 - Please consider AWSCR - CP as an alternative
AWSCR-MGD
RoHS/RoHS II Compliant
Moisture Sensitivity Level (MSL) – This product is not Moisture Sensitive - MSL = 1
FEATURES:
• Low resonant impedance
• Built-in load capacitors
• Suitable for RoHS compliant reflow
• Low cost solution for cost sensitive applications
Pb in ceramic, exemption (7c-I)
7.4 x 3.4 x 1.8mm
| | | | | | | | | | | | | |
|
APPLICATIONS:
• Remote controls, Microprocessor clocks,
DVD & CD-ROMs, Electric appliances
• Consumer electronics
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Minimum
1.84
Typical
33 – 20%
33
Maximum
8
100
100
50
30
33 + 20%
22 – 20%
22
22 + 20%
Resonant Impedance (Ro)
Standard Built-in Capacitance (C1=C2)
Frequency Tolerance
Frequency Stability
-0.5
-0.3
Withstanding Voltage
(1) D.C.Voltage
Rating Voltage
(2) A.C. Voltage
Insulation Resistance
Operation Temperature
Storage Temperature
Aging Rate (Fosc) (10 years)
50
100
-25
-55
Units
MHz
Ω
pF
0.5
0.3
%
%
V
6
15
V
Vp-p.
MΩ
ºC
ºC
%
85
85
0.3
-0.3
Notes
1.84 MHz - 2.39 MHz
2.40 MHz - 2.99 MHz
3.00 MHz - 3.49 MHz
3.50 MHz - 8.00 MHz
1.84 MHz - 2.39 MHz
2.40 MHz - 2.99 MHz
3.00 MHz - 3.49 MHz
3.50 MHz - 8.00 MHz
-25ºC to +85ºC
DC , 1 min
10V, 1min
TEST CIRCUIT:
X: Ceramic Resonator
1. Input
2. Ground
3. Output
Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) unless
the standard condition (Temp: 25±3°C, Humidity: 65±10% R.H.) is regulated to measure
OPTIONS AND PART IDENTIFICATION:
(Left blank if standard)
AWSCR – X.XX
Frequency
Load Capacitance
Contact ABRACON
for Built-in
Capacitance options
Frequency in MHz
ABRACON IS
LLC
Packaging
T: 1000pcs/Reel
T4: 4000pcs/Reel
5101 Hidden Creek Lane Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sale, please visit:
www.abracon.com
REVISED: 12.16.2016
ABRACON IS
ISO9001-2008
CERTIFIED
7.4 x 3.4 x 1.8mm BUILT-IN CAPACITANCE CERAMIC RESONATOR
AWSCR-MGD
Obselete/End of Life Date: 10/26/2016 - Please consider AWSCR- CP as an alternative
AWSCR-MGD
RoHS/RoHS II Compliant
Pb in ceramic, exemption (7c-I)
7.4 x 3.4 x 1.8mm
| | | | | | | | | | | | | |
OUTLINE DRAWING:
Recommended Land Pattern
Dimension: mm
TAPE & REEL:
T: 1000pcs/reel
T4: 4000pcs/reel
Reel
Quantity
1000 (T)
4000 (T4)
ФA
ФB
W
T
179±2
330±3
60 typ.
80 min
16.4 min
16.4 min
22.4 max
22.4 max
Pieces per
reel
1000 typ.
4000 typ.
Carrier tape
size
16
16
Dimension: mm
Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the
product will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging
according to MSL 1 requirements to maintain solderability.
ABRACON IS
LLC
5101 Hidden Creek Lane Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sale, please visit:
www.abracon.com
REVISED: 12.16.2016
ABRACON IS
ISO9001-2008
CERTIFIED
|
7.4 x 3.4 x 1.8mm BUILT-IN CAPACITANCE CERAMIC RESONATOR
AWSCR-MGD
Obselete/End of Life Date: 10/26/2016 - Please consider AWSCR- CP as an alternative
AWSCR-MGD
RoHS/RoHS II Compliant
Pb in ceramic, exemption (7c-I)
7.4 x 3.4 x 1.8mm
| | | | | | | | | | | | | |
REFLOW PROFILE:
Dimension: mm
CAUTION:
• Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause
damage to the component.
• This component is not hermetically sealed. Do not clean or wash the component.
• Reflow soldering: Do not use strong acidity flux,such as flux with chlorine content of greater than 0.2wt% during reflow Soldering.
• Do not expose the component to open flame.
• This specification applies to the functionality of the component as a single unit. Customers are advised to insure that the component is thoroughly
evaluated in the particular application.
• Storage conditions: If the product is to be stored for a period greater than six months after the delivery date, it is recommended that customers confirm
the solderability and characteristics for the product prior to use.
• This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other high-reliability, life-dependant
application. Contact Abracon Corporation prior to using this product when in doubt.
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
CE R
LLC
5101 Hidden Creek Lane Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sale, please visit:
www.abracon.com
REVISED: 12.16.2016
ABRACON IS
ISO9001-2008
CERTIFIED
|
Similar pages