Vishay MKP1848512454K2 Metallized polypropylene film capacitors dc capacitor mkp type Datasheet

MKP 1848 DC-Link
Vishay Roederstein
Metallized Polypropylene Film Capacitors
DC Capacitor MKP Type
FEATURES
W
• Compliant to RoHS Directive 2002/95/EC
• AEC-Q200 qualified
I
RATED CAPACITANCE
1 µF to 400 µF
h
CAPACITANCE TOLERANCE
±5%
6-1
Ø dt
P1 ± 0.4 - PCM 27.5 mm
P1 ± 0.5 - PCM ≥ 37.5 mm
DC VOLTAGE RATING
UNDC at 85 °C
450 V 700 V 800 V
UOPDC at 70 °C
500 V 800 V 900 V 1100 V 1350 V 1500 V
UOPDC at 105 °C 300 V 500 V 570 V
900 V
650 V
1100 V 1200 V
800 V
850 V
W
I
INSULATION RESISTANCE
Marking
h
RC between leads, after 1 min > 10 000 s
For UNDC  500 V measuring voltage 100 V
For UNDC > 500 V measuring voltage 500 V
SELF INDUCTANCE (Ls)
6-2
Ø dt
P1 ± 0.5
P2 ± 0.5
Dimensions in millimeters
Ø dt ± 10 % of standard diameter specified
< 1 nH per mm of lead spacing
WITHSTANDING DC VOLTAGE BETWEEN
TERMINALS
1.5 UNDC for 10 s, cut off current 10 mA, rise time 1000 V/s
See document “Voltage Proof Test for Metalized Film
Capacitors” www.vishay.com/doc?28169
APPLICATIONS
High performance DC filtering applications
REFERENCE STANDARDS
MAXIMUM APPLICABLE PEAK TO PEAK
RIPPLE VOLTAGE
0.2 x UNDC
IEC 61071
IEC 60068
CLIMATIC TESTING CLASS
MARKING
40/105/56
C-value; tolerance; rated voltage; code for dielectric
material; code for manufacturing origin; manufacturer’s type
designation; manufacturer’s logo; year and week of
manufacture
RATED TEMPERATURE
85 °C
DIELECTRIC
MAXIMUM PERMISSIBLE CASE
TEMPERATURE
Polypropylene film
105 °C, observing voltage derating
ELECTRODES
LIFE TIME EXPECTANCY
Metallized dielectric capacitor
CONSTRUCTION
Mono construction
ENCAPSULATION
Plastic case, sealed with resin
Flame retardant
TERMINALS
Tinned wires
Document Number: 28164
Revision: 27-May-11
Useful life time: > 100 000 h at UNDC and 70 °C
FIT: < 10 x 10-9/h (10 per 109 component h) at 0.5 x UNDC;
40 °C
DETAIL SPECIFICATION
For more detailed data and test requirements, contact:
[email protected]
GENERAL INFORMATION
Characteristics and definitions used for film capacitors:
www.vishay.com/docs/28147/intro.pdf
For technical questions, contact: [email protected]
www.vishay.com
281
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP 1848 DC-Link
Metallized Polypropylene Film Capacitors
DC Capacitor MKP Type
Vishay Roederstein
COMPOSITION OF CATALOG NUMBER
MULTIPLIER
(nF)
10
4
100
5
1000
6
10 000
7
MKP 1848
CAPACITANCE
(numerically)
Example:
6
12
512
1200 nF
1.2 µF
P1
(mm)
PITCH
CODE
612
12 000 nF
12 µF
27.5
K
712
120 000 nF
120 µF
37.5
P
52.5
Y
09
4
P
4
SPECIAL CODE FOR TERMINAL
TYPE CONSTRUCTION
2
2 pins
4
4 pins P2 = 10.2 mm
5
4 pins P2 = 20.3 mm
(1)
Customized
TOLERANCE
METALLIZED POLYPROPYLENE
VOLTAGE
4
±5%
UN = 45 = 450 VDC
UN = 70 = 700 VDC
UN = 08 = 800 VDC
UN = 09 = 900 VDC
UN = 91 = 1100 VDC
UN = 92 = 1200 VDC
Note
(1) Tabs terminals or customized terminals are available on request
MULTIPLE PINS CAPACITORS
w
l
6 pins
Marking
h
lt
Ø dt
P2
P1
2 x P2
w
l
12 pins
Marking
h
lt
Ø dt
P1
P2
2 x P2
3 x P2
4 x P2
5 x P2
www.vishay.com
282
For technical questions, contact: [email protected]
Document Number: 28164
Revision: 27-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP 1848 DC-Link
Metallized Polypropylene Film Capacitors
DC Capacitor MKP Type
Vishay Roederstein
SPECIFIC REFERENCE DATA 450 VDC
UNDC at 85 °C = 450 V, UOPDC at 70 °C = 500 V, UOPDC at 105 °C = 300 V
CAP.
(9)
DIMENSIONS
(mm) (5)
P1
(µF)
w
h
l
1
2
3
4
5
6
7
8
9
10
12
15
10
12
15
20
22
25
30
9.0
9.0
11.0
11.0
13.0
15.0
15.0
18.0
18.0
18.0
21.0
20.0
18.5
18.5
18.5
21.5
21.5
21.5
24.0
19.0
19.0
21.0
21.0
23.0
25.0
25.0
28.0
28.0
28.0
31.0
35.0
35.5
35.5
35.5
38.5
38.5
38.5
44.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
43.0
43.0
43.0
43.0
43.0
43.0
42.0
35
30.0
45.0 42.0 37.5
40
30.0
45.0 42.0 37.5
40
45
50
55
60
65
70
75
80
90
95
100
25.0
25.0
30.0
30.0
30.0
35.0
35.0
35.0
35.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
50.0
50.0
50.0
50.0
45.0
45.0
45.0
P2
(mm) (mm)
IRMS
(A) (2)
ESR
(m) (3)
tan 
10 kHz
< (10-4) (4)
2
4
pins pins
85
85
85
85
85
85
85
85
85
85
85
85
160 140
160 140
160 140
160 140
160 140
160 140
160 140
MASS SPQ
(6)
PART NUMBER (1)
(g)
(pcs)
6.0
5.5
8.5
8.5
10.5
12.5
11.5
15.0
16.0
15.0
21.5
20.0
34
32
30
36
38
36
48
160
160
130
130
115
100
100
80
80
80
65
70
105
105
105
91
91
91
77
MKP1848510454K2
MKP1848520454K2
MKP1848530454K2
MKP1848540454K2
MKP1848550454K2
MKP1848560454K2
MKP1848570454K2
MKP1848580454K2
MKP1848590454K2
MKP1848610454K2
MKP1848612454K2
MKP1848615454K2
MKP1848610454P*
MKP1848612454P*
MKP1848615454P*
MKP1848620454P*
MKP1848622454P*
MKP1848625454P*
MKP1848630454P*
52.5
52.5
52.5
52.5
52.5
52.5
52.5
52.5
52.5
52.5
52.5
52.5
10.2
10.2
10.2
10.2
10.2
10.2
10.2
10.2/
20.3
10.2/
20.3
10.2
10.2
20.3
20.3
20.3
20.3
20.3
20.3
20.3
20.3
20.3
20.3
200 (10) 70.0
65.0 57.5 52.5
20.3
1.2
20
2000
-
30.5
-
2.0
-
35
-
310
266
20
MKP1848720454Y5 (7)
400 (10)
65.0 57.5 52.5
20.3
1.2
10
4000
-
50.5
-
1.5
-
35
-
380
490
10
MKP1848740454Y5 (8)
130
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
27.5
37.5
37.5
37.5
37.5
37.5
37.5
37.5
tan 
1 kHz
< (10-4) (4)
2
4
2
4
2
4
(mm) (V/µs) (A) pins
pins pins pins pins pins
0.8
75
75
2.5
54
10
0.8
75
150
3
34.5
10
0.8
75
225
4
23.0
10
0.8
75
300
4
20.5
10
0.8
75
375
5
16.5
10
0.8
75
450
6
13.5
10
0.8
75
525 6.5
11.5
10
0.8
75
600 8.5
8.5
10
0.8
75
675 8.5
9.0
10
0.8
75
750
9
8.0
10
0.8
75
900 10
7.0
10
0.8
75 1125 11.5
6.0
10
1.0
40
400 7.5
8 13.5 12.0
18 16
1.0
40
480
8
8.5 11.5 10.0
18 16
1.0
40
600
9
10 9.0
8.0
18 16
1.0
40
800 11
12 7.0
6.0
18 16
1.0
40
880 11 11.5 7.5
6.5
18 16
1.0
40 1000 11.5 12.5 6.5
5.5
18 16
1.0
40 1200 13.5 15 5.5
4.5
18 16
Ø dt dV/dt IPEAK
1.0
40
1400
17
18.5
4.0
3.5
18
16
160 140
57
63
MKP1848635454P*
1.0
40
1600
17
18.5
4.0
3.5
18
16
160 140
60
63
MKP1848640454P*
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
20
20
20
20
20
20
20
20
20
20
20
20
800 13 13.5
900 12.5 13.5
1000 15 15.5
1100 15 15.5
1200 15.5 16.5
1300 19 20.5
1400 18
19
1500 19 20.5
1600 19 20.5
1800 21.5
1900 21.5
2000 23.5
6.5
7.0
5.5
5.5
5.0
4.0
4.5
4.0
4.0
-
6.0
6.0
5.0
5.0
4.5
3.5
4.0
3.5
3.5
3.0
3.0
2.5
35
35
35
35
35
35
35
35
35
-
30
30
30
30
30
30
30
30
30
30
30
30
310
310
310
310
310
310
310
310
310
-
280
280
280
280
280
280
280
280
280
280
280
280
66
70
88
96
91
100
112
108
102
127
124
120
55
55
45
45
45
40
40
40
40
30
30
30
MKP1848640454Y*
MKP1848645454Y*
MKP1848650454Y*
MKP1848655454Y*
MKP1848660454Y*
MKP1848665454Y*
MKP1848670454Y*
MKP1848675454Y*
MKP1848680454Y*
MKP1848690454Y5
MKP1848695454Y5
MKP1848710454Y5
Notes
(1) Change the * symbol with special code for the terminals
(2) Maximum RMS current at 10 kHz, + 85 °C, t = + 15 °C, cap. tol.  ± 5 %
(3) Equivalent series resistance typical values at 10 kHz
(4) Maximum tan  values
(5) Standard dimension
(6) SPQ = Standard Packing Quantity
(7) 6 pins
(8) 12 pins
(9) Intermediate capacitance values available on request.
(10) Under release
Document Number: 28164
Revision: 27-May-11
For technical questions, contact: [email protected]
www.vishay.com
283
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP 1848 DC-Link
Metallized Polypropylene Film Capacitors
DC Capacitor MKP Type
Vishay Roederstein
SPECIFIC REFERENCE DATA 700 VDC
UNDC at 85 °C = 700 V, UOPDC at 70 °C = 800 V, UOPDC at 105 °C = 500 V
tan 
tan 
10 kHz MASS SPQ
1 kHz
(5)
-4
(4)
< (10-4) (4)
< (10 )
PART NUMBER (1)
2
4
2
4
2
4
2
4
pins pins pins pins pins pins pins pins (g) (pcs)
IRMS
(A) (2)
CAP.
DIMENSIONS
(mm) (5)
(µF)
w
1
9.0
19.0 32.0 27.5
-
0.8
75
75
2.5
-
54.0
-
8.0
-
68
-
6.0
160
MKP1848510704K2
2
9.0
19.0 32.0 27.5
-
0.8
75
150
3
-
34.5
-
8.0
-
68
-
5.5
160
MKP1848520704K2
3
11.0 21.0 32.0 27.5
-
0.8
75
225
4
-
23.0
-
8.0
-
68
-
8.5
130
MKP1848530704K2
4
13.0 23.0 32.0 27.5
-
0.8
75
300
5
-
17.0
-
8.0
-
68
-
10.5
115
MKP1848540704K2
5
15.0 25.0 32.0 27.5
-
0.8
75
375
6
-
14.0
-
8.0
-
68
-
12
100
MKP1848550704K2
(9)
h
l
P1
P2
Ø dt dV/dt IPEAK
(mm) (mm) (mm) (V/µs) (A)
ESR
(m) (3)
6
18.0 28.0 32.0 27.5
-
0.8
75
450
7.5
-
11.5
-
8.0
-
68
-
17
80
MKP1848560704K2
7
18.0 28.0 32.0 27.5
-
0.8
75
525
8
-
10.0
-
8.0
-
68
-
16
80
MKP1848570704K2
8
18.0 28.0 32.0 27.5
-
0.8
75
600
8.5
-
8.5
-
8.0
-
68
-
15
80
MKP1848580704K2
9
21.0 31.0 32.0 27.5
-
0.8
75
675
10
-
7.5
-
8.0
-
68
-
22
65
MKP1848590704K2
10
21.0 31.0 32.0 27.5
-
0.8
75
750
10
-
7.0
-
8.0
-
68
-
21
65
MKP1848610704K2
12
20.0 35.0 32.0 27.5
-
0.8
75
900
11.5
-
6.0
-
8.0
-
68
-
20
70
MKP1848612704K2
10
18.5 35.5 43.0 37.5
10.2
1.0
40
400
7.5
8
13.5 12.0
15
13
135
120
34
105
MKP1848610704P*
12
18.5 35.5 43.0 37.5
10.2
1.0
40
480
8
8.5
11.5 10.0
15
13
135
120
32
105
MKP1848612704P*
15
18.5 35.5 43.0 37.5
10.2
1.0
40
600
9
10
9.0
8.0
15
13
135
120
30
105
MKP1848615704P*
20
21.5 38.5 43.0 37.5
10.2
1.0
40
800
11
12
7.0
6.0
15
13
135
120
36
91
MKP1848620704P*
22
24.0 44.0 42.0 37.5
10.2
1.0
40
880
13
13.5
6.0
5.5
15
13
135
120
49
77
MKP1848622704P*
25
24.0 44.0 42.0 37.5
10.2
1.0
40
1000 13.5 14.5
5.5
5.0
15
13
135
120
47
77
MKP1848625704P*
30
30.0 45.0 42.0 37.5 10.2/
20.3
1.0
40
1200
16
17
4.5
4.0
15
13
135
120
62
63
MKP1848630704P*
35
30.0 45.0 42.0 37.5 10.2/
20.3
1.0
40
1400
17
18.5
4.0
3.5
15
13
135
120
55
63
MKP1848635704P*
30
25.0 45.0 57.5 52.5
10.2
1.2
20
600
11
12
9.0
8.0
30
25
270
240
76
55
MKP1848630704Y*
35
25.0 45.0 57.5 52.5
10.2
1.2
20
700
12
12.5
7.5
7.0
30
25
270
240
71
55
MKP1848635704Y*
40
25.0 45.0 57.5 52.5
10.2
1.2
20
800
13
13.5
6.5
6.0
30
25
270
240
66
55
MKP1848640704Y*
45
30.0 45.0 57.5 52.5
20.3
1.2
20
900
14.5
15
6.0
5.5
30
25
270
240
95
45
MKP1848645704Y*
50
30.0 45.0 57.5 52.5
20.3
1.2
20
1000
15
15.5
5.5
5.0
30
25
270
240
88
45
MKP1848650704Y*
55
35.0 50.0 57.5 52.5
20.3
1.2
20
1100
17
18
5.0
4.5
30
25
270
240
112
40
MKP1848655704Y*
60
35.0 50.0 57.5 52.5
20.3
1.2
20
1200
18
19
4.5
4.0
30
25
270
240
107
40
MKP1848660704Y*
65
35.0 50.0 57.5 52.5
20.3
1.2
20
1300
19
20.5
4.0
3.5
30
25
270
240
100
40
MKP1848665704Y*
70
45.0 45.0 57.5 52.5
20.3
1.2
20
1400
-
20
-
3.5
-
25
-
240
128
30
MKP1848670704Y5
75
45.0 45.0 57.5 52.5
20.3
1.2
20
1500
-
21.5
-
3.0
-
25
-
240
123
30
MKP1848675704Y5
80
45.0 45.0 57.5 52.5
20.3
1.2
20
1600
-
21.5
-
3.0
-
25
-
240
119
30
MKP1848680704Y5
160 (10
70.0 65.0 57.5 52.5
20.3
1.2
20
3200
-
30.5
-
2.5
-
28
-
280
264
20
MKP1848716704Y5 (7)
320 (10)
130.0 65.0 57.5 52.5
20.3
1.2
20
6400
-
54
-
1.3
-
28
-
280
359
10
MKP1848732704Y5 (8)
Notes
(1) Change the * symbol with special code for the terminals
(2) Maximum RMS current at 10 kHz, + 85 °C, t = + 15 °C, cap. tol.  ± 5 %
(3) Equivalent series resistance typical values at 10 kHz
(4) Maximum tan  values
(5) Standard dimension
(6) SPQ = Standard Packing Quantity
(7) 6 pins
(8) 12 pins
(9) Intermediate capacitance values available on request.
(10) Under release
www.vishay.com
284
For technical questions, contact: [email protected]
Document Number: 28164
Revision: 27-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP 1848 DC-Link
Metallized Polypropylene Film Capacitors
DC Capacitor MKP Type
Vishay Roederstein
SPECIFIC REFERENCE DATA 800 VDC
UNDC at 85 °C = 800 V, UOPDC at 70 °C = 900 V, UOPDC at 105 °C = 570 V
CAP.
(9)
DIMENSIONS
(mm) (5)
h
l
P1
P2
Ø dt dU/dt IPEAK
IRMS
(A) (2)
ESR
(m) (3)
tan 
tan 
10 kHz MASS SPQ
1 kHz
(5)
-4
(4)
< (10-4) (4)
< (10 )
2
4
2
4
2
4
2
4
(mm) (mm) (mm) (V/µs) (A) pins
pins pins pins pins pins pins pins
PART NUMBER (1)
(µF)
w
(g)
(pcs)
1
9.0
19.0 32.0 27.5
-
0.8
75
75
2
-
62.5
-
7.0
-
60
-
6.5
160
2
11.0 21.0 32.0 27.5
-
0.8
75
150
3.5
-
31.0
-
7.0
-
3
13.0 23.0 32.0 27.5
-
0.8
75
225
4.5
-
21.0
-
7.0
-
60
-
9.0
130
MKP1848520084K2
60
-
11
115
MKP1848530084K2
4
15.0 25.0 32.0 27.5
-
0.8
75
300
5.5
-
15.5
-
7.0
-
60
-
12
100
MKP1848540084K2
5
18.0 28.0 32.0 27.5
-
0.8
75
375
7
-
12.5
-
6
18.0 28.0 32.0 27.5
-
0.8
75
450
7.5
-
10.5
-
7.0
-
60
-
17
80
MKP1848550084K2
7.0
-
60
-
16
80
MKP1848560084K2
7
21.0 31.0 32.0 27.5
-
0.8
75
525
9
-
9.0
-
7.0
-
60
-
23
65
MKP1848570084K2
8
21.0 31.0 32.0 27.5
-
0.8
75
600
9.5
-
8.0
-
7.0
-
60
-
21
65
MKP1848580084K2
9
20.0 35.0 32.0 27.5
-
0.8
75
675
10
-
8.0
-
7.0
-
60
-
21
70
MKP1848590084K2
10
18.5 35.5 43.0 37.5
10.2
1.0
40
400
8
8.5
12.5 11.0
14
12
122 110
32
105
MKP1848610084P*
12
18.5 35.5 43.0 37.5
10.2
1.0
40
480
8.5
9
10.5 9.0
14
12
122 110
30
105
MKP1848612084P*
15
21.5 38.5 43.0 37.5
10.2
1.0
40
600
10
11
8.5
7.5
14
12
122 110
37
91
MKP1848615084P*
20
24.0 44.0 42.0 37.5
10.2
1.0
40
800
13
13.5
6.0
5.5
14
12
122 110
47
77
MKP1848620084P*
22
10.2/
30.0 45.0 42.0 37.5
20.3
1.0
40
880 14.5 15.5
5.5
5.0
14
12
122 110
65
63
MKP1848622084P*
25
30.0 45.0 42.0 37.5
10.2/
20.3
1.0
40
1000 15.5
16
5.0
4.5
14
12
122 110
61
63
MKP1848625084P*
30
25.0 45.0 57.5 52.5
10.2
1.2
10
300
12
12
8.0
7.5
25
22
240 215
69
55
MKP1848630084Y*
35
30.0 45.0 57.5 52.5
20.3
1.2
10
350
13
14.5
7.0
6.0
25
22
240 215
97
45
MKP1848635084Y*
40
30.0 45.0 57.5 52.5
20.3
1.2
10
400 14.5
15
6.0
5.5
25
22
240 215
91
45
MKP1848640084Y*
45
35.0 50.0 57.5 52.5
20.3
1.2
10
450
16
17
5.5
5.0
25
22
240 215
112
40
MKP1848645084Y*
50
35.0 50.0 57.5 52.5
20.3
1.2
10
500
17
18
5.0
4.5
25
22
240 215
104
40
MKP1848650084Y*
55
45.0 45.0 57.5 52.5
20.3
1.2
10
550
-
18.5
-
4.0
-
22
-
215
131
30
MKP1848655084Y5
60
45.0 45.0 57.5 52.5
20.3
1.2
10
600
-
20
-
3.5
-
22
-
215
125
30
MKP1848660084Y5
120 (10)
70.0 65.0 57.5 52.5
20.3
1.2
10
1600
-
27
-
3.2
-
22
-
215
276
20
MKP1848712084Y5 (7)
240 (10)
130.0 65.0 57.5 52.5
20.3
1.2
10
3200
-
48.5
-
1.6
-
22
-
215
393
10
MKP1848724084Y5 (8)
MKP1848510084K2
Notes
(1) Change the * symbol with special code for the terminals
(2) Maximum RMS current at 10 kHz, + 85 °C, t = + 15 °C, cap. tol.  ± 5 %
(3) Equivalent series resistance typical values at 10 kHz
(4) Maximum tan  values
(5) Standard dimension
(6) SPQ = Standard Packing Quantity
(7) 6 pins
(8) 12 pins
(9) Intermediate capacitance values available on request.
(10) Under release
Document Number: 28164
Revision: 27-May-11
For technical questions, contact: [email protected]
www.vishay.com
285
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP 1848 DC-Link
Metallized Polypropylene Film Capacitors
DC Capacitor MKP Type
Vishay Roederstein
SPECIFIC REFERENCE DATA 900 VDC
UNDC at 85 °C = 900 V, UOPDC at 70 °C = 1100 V, UOPDC at 105 °C = 650 V
CAP.
(9)
(µF)
DIMENSIONS
(mm) (5)
w
h
l
P1
P2
Ø dt dV/dt IPEAK
IRMS
(A) (2)
ESR
(m) (3)
tan 
tan 
10 kHz MASS SPQ
1 kHz
(5)
-4
(4)
< (10-4) (4)
< (10 )
2
4
2
4
2
4
2
4
(mm) (mm) (mm) (V/µs) (A) pins
pins pins pins pins pins pins pins
(g)
(pcs)
PART NUMBER (1)
1
9.0
19.0 32.0 27.5
-
0.8
40
40
2
-
63.0
-
7.0
-
50
-
6.0
160
2
13.0 23.0 32.0 27.5
-
0.8
80
160
3.5
-
32.0
-
7.0
-
50
-
11.0
115
MKP1848510094K2
MKP1848520094K2
3
15.0 25.0 32.0 27.5
-
0.8
80
240
5
-
21.0
-
7.0
-
50
-
12.0
100
MKP1848530094K2
4
18.0 28.0 32.0 27.5
-
0.8
80
320
6
-
16.0
-
7.0
-
50
-
16.5
80
MKP1848540094K2
5
21.0 31.0 32.0 27.5
-
0.8
80
400
7.5
-
13.0
-
7.0
-
50
-
22.5
65
MKP1848550094K2
6
21.0 31.0 32.0 27.5
-
0.8
80
480
8.5
-
10.0
-
7.0
-
50
-
21.0
65
MKP1848560094K2
7
20.0 35.0 32.0 27.5
-
0.8
80
560
9
-
9.0
-
7.0
-
50
-
21.0
70
MKP1848570094K2
5
18.5 35.5 43.0 37.5 10.2
1.0
20
100
6
6
18.5 35.5 43.0 37.5 10.2
1.0
40
240
6.5
7
18.5 35.5 43.0 37.5 10.2
1.0
40
280
6.5
8
18.5 35.5 43.0 37.5 10.2
1.0
40
320
7
9
18.5 35.5 43.0 37.5 10.2
1.0
40
360
7.5
8
10
21.5 38.5 43.0 37.5 10.2
1.0
40
400
8.5
6.5 21.0 19.0
12
10
100
90
32
105
MKP1848550094P*
7
18.0 16.0
12
10
100
90
30
105
MKP1848560094P*
7
18.0 16.0
12
10
100
90
33
105
MKP1848570094P*
7.5 16.0 14.0
12
10
100
90
31
105
MKP1848580094P*
14.0 12.0
12
10
100
90
30
105
MKP1848590094P*
9
12.0 11.0
12
10
100
90
39
91
MKP1848610094P*
12
21.5 38.5 43.0 37.5 10.2
1.0
40
480
9.5
10
10.0 9.0
12
10
100
90
36
91
MKP1848612094P*
15
24.0 44.0 42.0 37.5 10.2
1.0
40
600
11
12
8.0
7.0
12
10
100
90
47
77
MKP1848615094P*
16
24.0 44.0 42.0 37.5 10.2
1.0
40
640
11
12
8.0
7.0
12
10
100
90
45
77
MKP1848616094P*
20
10.2/
30.0 45.0 42.0 37.5
20.3
1.0
40
800
14
15.5 6.0
5.0
12
10
100
90
57
63
MKP1848620094P*
15
25.0 45.0 57.5 52.5 10.2
1.2
20
300
9
9.5 14.0 12.0
25
20
200 185
70
55
MKP1848615094Y*
20
25.0 45.0 57.5 52.5 10.2
1.2
20
400
9.5
10
25
20
200 185
73
55
MKP1848620094Y*
22
25.0 45.0 57.5 52.5 10.2
1.2
20
440
10
10.5 11.0 10.0
25
20
200 185
70
55
MKP1848622094Y*
25
30.0 45.0 57.5 52.5 20.3
1.2
20
500
11
11.5 10.0 9.0
25
20
200 185
98
45
MKP1848625094Y*
30
30.0 45.0 57.5 52.5 20.3
1.2
20
600 12.5
8.0
7.0
25
20
200 185
89
45
MKP1848630094Y*
35
35.0 50.0 57.5 52.5 20.3
1.2
20
700 14.5 15.5 7.0
6.0
25
20
200 185
109
40
MKP1848635094Y*
40
35.0 50.0 57.5 52.5 20.3
1.2
20
800 15.5
200 185
99
40
MKP1848640094Y*
45
45.0 45.0 57.5 52.5 20.3
1.2
20
900
124
30
MKP1848645094Y5
50
45.0 45.0 57.5 52.5 20.3
1.2
20
100 (10)
70.0 65.0 57.5 52.5 20.3
1.2
20
200 (10) 130.0 65.0 57.5 52.5 20.3
1.2
20
13
12.0 11.0
17
6.0
5.0
25
20
-
16.5
-
5.0
-
20
1000
-
18.5
-
4.0
-
20
-
185
117
30
MKP1848650094Y5
2000
-
26.5
-
3.3
-
22
-
205
259
20
MKP1848710094Y5 (7)
4000
-
48.5
-
1.6
-
22
-
205
608
10
MKP1848720094Y5 (8)
-
185
Notes
(1) Change the * symbol with special code for the terminals
(2) Maximum RMS current at 10 kHz, + 85 °C, t = + 15 °C, cap. tol.  ± 5 %
(3) Equivalent series resistance typical values at 10 kHz
(4) Maximum tan  values
(5) Standard dimension
(6) SPQ = Standard Packing Quantity
(7) 6 pins
(8) 12 pins
(9) Intermediate capacitance values available on request.
(10) Under release
www.vishay.com
286
For technical questions, contact: [email protected]
Document Number: 28164
Revision: 27-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP 1848 DC-Link
Metallized Polypropylene Film Capacitors
DC Capacitor MKP Type
Vishay Roederstein
SPECIFIC REFERENCE DATA 1100 VDC
UNDC at 85 °C = 1100 V, UOPDC at 70 °C = 1350 V, UOPDC at 105 °C = 800 V
CAP.
(9)
(µF)
1
DIMENSIONS
(mm) (5)
w
h
l
P1
P2
Ø dt dV/dt IPEAK
(mm) (mm) (mm) (V/µs) (A)
11.0 21.0 32.0 27.5
-
0.8
95
IRMS
(A) (2)
ESR
(m) (3)
tan 
tan 
1 kHz
10 kHz MASS SPQ
(5)
< (10-4) (4) < (10-4) (4)
2
4
2
4
2
4
2
4
pins pins pins pins pins pins pins pins
95
3
-
45.5
-
6.0
-
45
-
(g)
(pcs)
9.0
130
PART NUMBER (1)
MKP1848510914K2
2
15.0 25.0 32.0 27.5
-
0.8
95
190
4.5
-
23.0
-
6.0
-
45
-
12.0
100
MKP1848520914K2
3
18.0 28.0 32.0 27.5
-
0.8
95
285
6
-
15.5
-
6.0
-
45
-
16.0
80
MKP1848530914K2
4
21.0 31.0 32.0 27.5
-
0.8
95
380
8
-
11.5
-
6.0
-
45
-
21.5
65
MKP1848540914K2
5
20.0 35.0 32.0 27.5
-
0.8
95
475
9
-
9.5
-
6.0
-
45
-
21.5
65
MKP1848550914K2
5
18.5 35.5 43.0 37.5
10.2
1.0
45
225
6.5
7
18.0 16.0
10
8.5
90
80
33
105
MKP1848550914P*
6
18.5 35.5 43.0 37.5
10.2
1.0
45
270
7
7.5
15.0 13.5
10
8.5
90
80
30
105
MKP1848560914P*
7
21.5 38.5 43.0 37.5
10.2
1.0
45
315
8
8.5
13.0 11.5
10
8.5
90
80
39
91
MKP1848570914P*
8
21.5 38.5 43.0 37.5
10.2
1.0
45
360
9
9.5
11.0 10.0
10
8.5
90
80
37
91
MKP1848580914P*
10.5 10.0 9.0
9
24.0 44.0 42.0 37.5
10.2
1.0
45
405
10
10
24.0 44.0 42.0 37.5
10.2
1.0
45
450
10.5
10
8.5
90
80
50
77
MKP1848590914P*
9.0
8.0
10
8.5
90
80
48
77
MKP1848610914P*
12
30.0 45.0 42.0 37.5
10.2/
20.3
1.0
45
540
12.5 13.5
7.5
6.5
10
8.5
90
80
63
63
MKP1848612914P*
10
25.0 45.0 57.5 52.5
10.2
1.2
23
230
8
8.5
18.0 16.0
20
17
175 155
81
55
MKP1848610914Y*
12
25.0 45.0 57.5 52.5
10.2
1.2
23
276
8.5
15
25.0 45.0 57.5 52.5
10.2
1.2
23
345
9.5
9
15.0 13.0
20
17
175 155
77
55
MKP1848612914Y*
10.5 12.0 10.5
20
17
175 155
70
55
MKP1848615914Y*
20
30.0 45.0 57.5 52.5
20.3
1.2
23
460
11.5 12.5
20
17
175 155
91
45
MKP1848620914Y*
22
35.0 50.0 57.5 52.5
20.3
1.2
23
506
13.5 14.5
8.0
7.0
20
17
175 155
115
40
MKP1848622914Y*
25
35.0 50.0 57.5 52.5
20.3
1.2
23
575
14.5
15
7.0
6.5
20
17
175 155
108
40
MKP1848625914Y*
30
45.0 45.0 57.5 52.5
20.3
1.2
23
690
-
16.5
-
5.0
-
17
-
155
126
30
MKP1848630914Y5
60 (10)
70.0 65.0 57.5 52.5
20.3
1.2
23
1380
-
40
-
2.5
-
18
-
180
256
20
MKP1848660914Y5 (7)
70 (10) 70.0 65.0 57.5 52.5
20.3
1.2
23
1610
-
34.5
-
2.0
-
18
-
180
257
20
MKP1848670914Y5 (7)
120 (10) 130.0 65.0 57.5 52.5
20.3
1.2
23
2760
-
39.5
-
2.4
-
18
-
180
606
10
MKP1848712914Y5 (8)
140 (10) 130.0 65.0 57.5 52.5
20.3
1.2
23
3220
-
43.5
-
2
-
18
-
180
608
10
MKP1848714914Y5 (8)
11
9.0
8.0
Notes
(1) Change the * symbol with special code for the terminals
(2) Maximum RMS current at 10 kHz, + 85 °C, t = + 15 °C, cap. tol.  ± 5 %
(3) Equivalent series resistance typical values at 10 kHz
(4) Maximum tan  values
(5) Standard dimension
(6) SPQ = Standard Packing Quantity
(7) 6 pins
(8) 12 pins
(9) Intermediate capacitance values available on request.
(10) Under release
Document Number: 28164
Revision: 27-May-11
For technical questions, contact: [email protected]
www.vishay.com
287
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP 1848 DC-Link
Vishay Roederstein
Metallized Polypropylene Film Capacitors
DC Capacitor MKP Type
SPECIFIC REFERENCE DATA 1200 VDC
UNDC at 85 °C = 1200 V, UOPDC at 70 °C = 1500 V, UOPDC at 105 °C = 850 V
CAP.
(9)
(µF)
DIMENSIONS
(mm) (5)
w
h
l
P1
P2
Ø dt dV/dt IPEAK
(mm) (mm) (mm) (V/µs) (A)
IRMS
(A) (2)
ESR
(m) (3)
tan 
tan 
10 kHz MASS SPQ
1 kHz
(5)
< (10-4) (4) < (10-4) (4)
2
4
2
4
2
4
2
4
pins pins pins pins pins pins pins pins
(g)
(pcs)
PART NUMBER (1)
1
11.0 21.0 32.0 27.5
-
0.8
100
100
3
-
43.0
-
6.0
-
40
-
9.0
130
MKP1848510924K2
2
15.0 25.0 32.0 27.5
-
0.8
100
200
5
-
21.5
-
6.0
-
40
-
11.5
100
MKP1848520924K2
3
18.0 28.0 32.0 27.5
-
0.8
100
300
6.5
-
14.5
-
6.0
-
40
-
15.0
80
MKP1848530924K2
4
21.0 31.0 32.0 27.5
-
0.8
100
400
8
-
11.0
-
6.0
-
40
-
20.0
65
MKP1848540924K2
5
18.5 35.5 43.0 37.5
10.2
1.0
48
240
6.5
7
17.0 15.0
10
8.5
80
70
31
105
MKP1848550924P*
6
18.5 35.5 43.0 37.5
10.2
1.0
48
288
7.5
8
14.0 12.5
10
8.5
80
70
29
105
MKP1848560924P*
7
21.5 38.5 43.0 37.5
10.2
1.0
48
336
8.5
9
12.0 11.0
10
8.5
80
70
37
91
MKP1848570924P*
8
21.5 38.5 43.0 37.5
10.2
1.0
48
384
9
9.5
10.5 9.5
10
8.5
80
70
35
91
MKP1848580924P*
9
24.0 44.0 42.0 37.5
10.2
1.0
48
432
10.5
11
9.5
8.5
10
8.5
80
70
48
77
MKP1848590924P*
10
24.0 44.0 42.0 37.5
10.2
1.0
48
480
11
11.5
8.5
7.5
10
8.5
80
70
45
77
MKP1848610924P*
12
30.0 45.0 42.0 37.5
10.2/
20.3
1.0
48
576
13
13.5
7.0
6.5
10
8.5
80
70
60
63
MKP1848612924P*
10
25.0 45.0 57.5 52.5
10.2
1.2
24
240
8
8.5
17.0 15.0
18
16
165 150
79
55
MKP1848610924Y*
12
25.0 45.0 57.5 52.5
10.2
1.2
24
288
9
9.5
14.0 12.5
18
16
165 150
74
55
MKP1848612924Y*
15
25.0 45.0 57.5 52.5
10.2
1.2
24
360
10
10.5 11.0 10.0
18
16
165 150
67
55
MKP1848615924Y*
20
35.0 50.0 57.5 52.5
20.3
1.2
24
480
13
14
8.5
7.5
18
16
165 150
115
40
MKP1848620924Y*
22
35.0 50.0 57.5 52.5
20.3
1.2
24
528
14
14.5
7.5
7.0
18
16
165 150
109
40
MKP1848622924Y*
25
35.0 50.0 57.5 52.5
20.3
1.2
24
600
15
15.5
6.5
6.0
18
16
165 150
100
40
MKP1848625924Y*
30
45.0 45.0 57.5 52.5
20.3
1.2
24
720
-
16.5
-
5.0
-
16
-
150
119
30
MKP1848630924Y5
60 (10)
70.0 65.0 57.5 52.5
20.3
1.2
24
1440
-
23
-
4.5
-
17
-
170
264
20
MKP1848660924Y5 (7)
120 (10) 130.0 65.0 57.5 52.5
20.3
1.2
24
2280
-
40.5
-
2.3
-
17
-
170
612
10
MKP1848712924Y5 (8)
Notes
(1) Change the * symbol with special code for the terminals
(2) Maximum RMS current at 10 kHz, + 85 °C, t = + 15 °C, cap. tol.  ± 5 %
(3) Equivalent series resistance typical values at 10 kHz
(4) Maximum tan  values
(5) Standard dimension
(6) SPQ = Standard Packing Quantity
(7) 6 pins
(8) 12 pins
(9) Intermediate capacitance values available on request.
(10) Under release
www.vishay.com
288
For technical questions, contact: [email protected]
Document Number: 28164
Revision: 27-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP 1848 DC-Link
Metallized Polypropylene Film Capacitors
DC Capacitor MKP Type
Vishay Roederstein
CONSTRUCTION DESCRIPTION
Low inductive wound cell elements of metallized polypropylene film, potted with resin in a flame retardant case.
Specific Method of Mounting to Withstand Vibration and Shock
The capacitor unit is designed for mounting on a printed circuit board.
In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the printed circuit
board.
The capacitors shall be mechanically fixed by the leads and the body clamped.
Space Requirements on Printed-Circuit Board
The maximum length and width of film capacitors is shown in the figure:
 Product height with seating plane as given by “IEC 60717” as reference:
Wmax.
P2
2 x P2 ± 0.5 mm
3 x P2 ± 0.5 mm
4 x P2 ± 0.5 mm
5 x P2 ± 0.5 mm
Lmax.
P1
ØD
P1 (mm)
L max. (mm)
W max. (mm)
Ø D (mm)
H (mm)
27.5
l + 1.6
w + 2.0
1.2
h + 0.2
37.5
l + 2.0
w + 3.0
1.5
h + 0.5
52.5
l + 2.4
w + 4.0
1.7
h + 0.5
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
 Storage temperature: Tstg = - 25 °C to + 40 °C with RH maximum 80 % without condensation.
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Document Number: 28164
Revision: 27-May-11
For technical questions, contact: [email protected]
www.vishay.com
289
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP 1848 DC-Link
Metallized Polypropylene Film Capacitors
DC Capacitor MKP Type
Vishay Roederstein
CHARACTERISTICS
Capacitance (typical curve)
Insulation resistance (typical curve)
105
4
3
2
ΔC/C (%)
1
RC (s)
0
104
-1
-2
-3
-4
-5
-6
- 60
- 40
- 20
0
20
40
60
80
100
120
Tamb (°C)
103
0
Lifetime expectancy (typical curve)
20
40
80
100
Tamb (°C)
60
Impedance vs. frequency (typical curve)
100
1.3
Pitch 27.5 mm
1.2
1 µF
1.0
1
85 °C
Z (Ω)
UOPDC/UNDC (V)
10
70 °C
1.1
0.9
12 µF
0.1
0.8
0.7
0.01
105 °C
0.6
0.5
103
104
105
106
Lifetime expectancy (h)
0.001
104
105
106
107
f (Hz)
Impedance vs. frequency (typical curve)
Impedance vs. frequency (typical curve)
10.0
10.0
Pitch 37.5 mm
Pitch 52.5 mm
1.0
1.0
10 µF
Z (Ω)
Z (Ω)
40 µF
0.1
80 µF
80 µF
0.01
0.001
104
0.1
0.01
105
106
107
0.001
104
f (Hz)
www.vishay.com
290
For technical questions, contact: [email protected]
105
106
f (Hz)
107
Document Number: 28164
Revision: 27-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP 1848 DC-Link
Metallized Polypropylene Film Capacitors
DC Capacitor MKP Type
Vishay Roederstein
Maximum IRMS current in function of the ambient temperature
1.6
IRMS operational/IRMS max.
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
50
60
70
80
90
100
Maximum ambient temperature (°C)
110
HEAT CONDUCTIVITY
DIMENSIONS (mm)
HEAT CONDUCTIVITY (mW/°C)
w
h
l
9.0
19.0
32.0
24
11.0
21.0
32.0
28
13.0
23.0
32.0
32
15.0
25.0
32.0
36
18.0
28.0
32.0
44
21.0
31.0
32.0
51
21.0
35.0
32.0
56
18.5
35.5
43.0
54
21.5
38.5
43.0
61
24.0
44.0
42.0
70
30.0
45.0
42.0
81
25.0
45.0
57.5
77
30.0
45.0
57.5
85
35.0
50.0
57.5
100
45.0
45.0
57.5
94
70.0
65.0
57.5
152
130.0
65.0
57.5
243
Power Dissipation and Maximum Component Temperature Rise
The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of
the free air ambient temperature.
The component temperature rise (T) can be measured or calculated by T = P/G:
 T = TC - Tamb = case temperature rise (°C) with a maximum of 15 °C at rated temperature.
 P = IRMS2 x ESR = power dissipation of the component (mW)
 G = heat conductivity of the component (mW/°C)
Document Number: 28164
Revision: 27-May-11
For technical questions, contact: [email protected]
www.vishay.com
291
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP 1848 DC-Link
Vishay Roederstein
Metallized Polypropylene Film Capacitors
DC Capacitor MKP Type
MEASURING THE COMPONENT TEMPERATURE
Thermocouple
The case temperature is measured in unloaded (Tamb) and maximum loaded condition (TC).
To avoid thermal radiation or convection, the capacitor must be tested in a closed area from air circulation.
APPLICATION NOTE AND LIMITING CONDITIONS
These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection.
These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression
capacitors conforming the standards must be used.
To select the capacitor for a certain application, the following conditions must be checked:
• The continuous peak voltage (UP+) shall not exceed the rated DC voltage rating (UNDC)
• The peak-to-peak ripple voltage (UPP) shall not be greater than 0.2 x (UNDC)
Voltage (V)
Non reversing recurrent waveform
Up+ UNDC
Upt
• For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For
information depending of the capacitance value and the number of parallel connections contact: [email protected]
• The voltage peak slope (dU/dt) shall not exceed the pulse slope at the DC voltage rating.
If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by UNDC and divided
by the applied voltage.
For all other pulses following equation must be fulfilled:
T
dU 2
dU
2 x   ------- x dt  U NDC x  -------
 dt 
 dt  rated
0
T is the pulse duration
www.vishay.com
292
For technical questions, contact: [email protected]
Document Number: 28164
Revision: 27-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP 1848 DC-Link
Metallized Polypropylene Film Capacitors
DC Capacitor MKP Type
Vishay Roederstein
Maximum Repetitive Peak Voltages
The capacitor unit may be subjected to the following surge without any significant reduction of lifetime expectancy
REPETITIVE SURGE VOLTAGE
MAXIMUM DURATION PER DAY
1.1 x UNDC
30 % on load duration
1.15 x UNDC
30 min
1.2 x UNDC
5 min
1.3 x UNDC
1 min
1.5 x UNDC
110 ms
INSPECTION REQUIREMENTS
General Notes
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 61071”.
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
ROUTINE TEST-FINAL INSPECTION
5.14.2.1 External inspection,
visual examination
Legible marking as specified
5.14.2.2 Dimensions
See specification drawing
5.3.1
Capacitance
1 kHz at room temperature
See specific reference data
5.3.2
tan 
1 kHz at room temperature
See specific reference data
10 kHz at room temperature
5.5.1.2
Voltage test between terminal
1.5 x UNDC at Tamb.
Duration 10 s
No visible damage or puncture
No flashover
5.7
Insulation resistance
UNDC  500 V measuring voltage 100 V
at room temperature
See specific reference data
UNDC  500 V measuring voltage 500 V
at room temperature
Duration 1 min
TYPE TESTS
5.14.2
External inspection
Check for finish, marking and overall
dimensions
5.14.0
Initial measurements
Capacitance at 1 kHz
tan at 10 kHz
5.14.1.1.4 Robustness of terminations
IEC 60068-2-21
Legible marking and finish as specified
Dimensions: see specific drawing
Tensile Ua1
Wire diameter
section
load
 0.8 mm
 0.5 mm2 10 N
 1.25 mm
 1.2 mm2 20 N
Duration 10 s ± 1 s
Bending Ub method 1
Wire diameter
section
load
 0.8 mm
 0.05 mm3 10 N
 1.25 mm
 0.019 mm3 20 N
4 x 90 °,
Duration 2 s to 3 s/bend
5.14.1.6 Resistance to soldering heat
IEC 60068-2-20
No predrying, Method 1A
Solder bath: 260 °C
Duration 10 s ± 1 s
5.14.4
Capacitance
tan 
Final measurements
Document Number: 28164
Revision: 27-May-11
C/C|  0.5 %
Increase of tan   0.0050
Compared to values measured in 5.14.0
For technical questions, contact: [email protected]
www.vishay.com
293
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP 1848 DC-Link
Vishay Roederstein
Metallized Polypropylene Film Capacitors
DC Capacitor MKP Type
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
5.14.0
Capacitance at 1 kHz
tan at 10 kHz
Initial measurements
5.14.3.1 Vibration
IEC 60068-2-6
10 Hz to 55 Hz: amplitude ± 0.35 mm or
acceleration 98 m/s2
Test duration: 10 frequency cycles, 3 axes
offset from each other by 90°
1 octave/min
Visual examination
5.14.3.2 Shock or impact
IEC 60068-2-6
Pulse shape: half sine
Acceleration: 490 m/s2
Duration t of pulse: 11 ms
Visual examination
5.14.4
Final measurements
Capacitance
tan 
5.5.3.1
Initial measurements
Capacitance at 1 kHz
tan at 10 kHz
R insulation
5.5.3.2
Voltage test between terminal
5.5.3.3
Final measurements
5.9.1
Initial measurements
1.5 x UNDC at Tamb.
Duration 60 s
Capacitance
tan 
R insulation
Capacitance at 1 kHz
tan at 10 kHz
5.9.2
Surge discharge test
1.1 x UNDC
Number of discharges: 5
Time lapse: every 2 min (10 min total)
5.9.3
Voltage test between terminal
Within 5 min after the surge discharge test
Duration 60 s
1.5 x UNDC at Tamb
5.9.3
Final measurements
Capacitance
tan at 10 kHz
5.11.1
Initial measurements
Capacitance at 1 kHz
tan at 10 kHz
5.11.2
Self healing test
1.5 x UNDC
Duration 10 s
Number of clearings 5
Clearing = voltage drop of 5 %
increase the voltage at 100 V/s till 5
clearings occur
with a max. of 2.5 x UNDC
for a duration of 10 s
Capacitance
tan 
5.11.3
Final measurements
5.13.0
Initial measurements
Capacitance at 1 kHz
tan at 10 kHz
5.13.1
Change of temperature acc. to
IEC 60068-2-14
Test Nb
Tmax. = 85 °C
Tmin. = - 40 °C
Transition time: 1 h, equivalent to 1 °C/min
5.13.2
Damp heat steady state
Acc. to IEC 60068-2-78
Test Ca
Tmax. = 40 ± 2 °C
RH = 93 ± 3 %
Duration 56 days
www.vishay.com
294
PERFORMANCE REQUIREMENTS
For technical questions, contact: [email protected]
No visible damage
No visible damage
C/C|  0.5 %
Increase of tan   0.0050
Compared to values measured in 5.14.0
C/C|  0.5 %
Increase of tan   1.2 initial tan  + 0.0001
R insulation  50 % of specified values
C/C|  1.0 %
tan   1.2 initial tan  + 0.0001
Compared to values measured in 5.9.1
C/C|  0.5 %
tan   1.2 x initial tan + 0.0001
Compared to values measured in 5.11.1
Document Number: 28164
Revision: 27-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP 1848 DC-Link
Metallized Polypropylene Film Capacitors
DC Capacitor MKP Type
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
5.5.3.2
Voltage test between terminal
1.5 x UNDC at ambient temperature
Duration 60 s
5.13.3
Final measurements
Visual examination
Capacitance
tan at 1 URMS 10 kHz
5.10.0
Initial measurements
Capacitance at 1 kHz
tan at 10 kHz
5.10.1
Thermal stability test under
overload conditions
5.10.2
Final measurements
5.12
Resonance frequency
measurement
Natural cooling Tamb ± 5 °C
1.21 x Pmax. = (U2/2) x W2 x C x tan  =
121 x (I2 max./W2 x c) x tan 2 with W2 = 2 x p
x f2 for Imax. (see specific reference data)
f2 = 10 kHz
Duration 48 h
Measure the temperature every 1.5 h during
the last 6 h
Capacitance
tan at 10 kHz
Impedance analyser at Tamb
5.10.0
Initial measurements
Capacitance at 1 kHz
tan at 10 kHz
5.15.1
Endurance test between terminals
5.15.2
Final measurements
Sequence
1.4 x UNDC at Tmax. = 85 °C
1.4 x UOPDC at 105 °C
Duration 250 h
1000 x discharge at 1.4 x I (maximum
repetitive peak current in continuous
operation)
1.4 x UNDC at Tmax. = 85 °C
1.4 x UOPDC at 105 °C
Duration 250 h
Capacitance
tan 
5.16.3.0 Initial measurements
5.16.3.1 Destruction test sequence
High DC voltage test
High AC voltage test
5.16.3.2 Final measurements
Document Number: 28164
Revision: 27-May-11
Vishay Roederstein
PERFORMANCE REQUIREMENTS
No puncturing or flashover
Self healing punctures are permitted
C/C|  2.0 %
Increase of tan   0.0150
Compared to values measured in 5.13.0
temperature rise < 1 °C
C/C|  2 %
Increase of tan   1.2 x initial + 0.0150
< 0.9 times the value as specified in typical
curve “Resonant frequency” of this
specification
C/C|  3 %
Increase of tan   0.0150
Compared to values measured in 5.15.0
Capacitance at 1 kHz
at Tmax. = 85 °C
Product enveloped with chees cloth 3 x UNDC
or DC voltage
Until repetitive product healings occur
Duration = 15 min
Audible healings or check healings with
oscilloscope
ACRMS voltage = UNDC x 2 2
with minimum of 250 VAC
Duration = 5 min
Repeat destruction sequence 3 x
Visual examination
No puncturing or flashover
Self healing punctures are permitted
For technical questions, contact: [email protected]
www.vishay.com
295
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
Similar pages