CHEMI-CON EMZK250ADA Low impedance, 5000-hours-life, 105â Datasheet

SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS
TM
AIchip
Low impedance, 5000-hours-life, 105℃
MZK
-
Series
・Endurance : 5,000 hours at 105℃
・Low impedance
・Rated voltage range : 6.3 to 35V
・Nominal capacitance range : 10 to 150µF
・Suitable for high reliability products
・Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
・RoHS Compliant
MVY
P76
Longer life
MZK
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
-25 to +105℃
6.3 to 35Vdc
±20%(M)
I=0.01CV or 3µA, whichever is greater
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
6.3V 10V 16V 25V 35V
Rated voltage (Vdc)
0.32 0.28 0.26 0.16 0.14
tanδ(Max.)
6.3V 10V 16V 25V 35V
Rated voltage(Vdc)
4
3
2
2
2
Z(-10℃)/Z(+20℃)
1
2
3
4
5
6
7
8
9
A±0.2
A
5.3
6.6
11
12
13
14
15
16
17
18
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47µF:470,100µF:101)
Taping code
Terminal code
Voltage code (ex. 6.3V:6R3,10V:100,35V:350)
Series code
Category
P
C±0.2
B±0.2
φD±0.5
L
5.8
5.8
10
E MZK AAA A DA AAA M AAA G
0.3max.
L±0.3
D
5
6.3
(at 20℃,120Hz)
◆PART NUMBERING SYSTEM
Code : A
W
Size code
E61
F61
(at 20℃, after 2 minutes)
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 5,000 hours
at 105℃.
Capacitance change
≦±30% of the initial value
D.F. (tanδ)
≦300% of the initial specified value
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦±30% of the initial value
D.F. (tanδ)
≦300% of the initial specified value
Leakage current
≦The initial specified value
◆DIMENSIONS [mm]
●Terminal
(at 20℃,120Hz)
B
5.3
6.6
C
5.9
7.2
W
0.5 to 0.8
0.5 to 0.8
P
1.4
1.9
Please refer to "Product code guide (surface mount type)"
◆MARKING
EX) 35V47µF
9C
47
V ZK
●Rated
voltage symbol
Rated voltage (Vdc) 6.3
Symbol
j
10
A
16
C
25
E
35
V
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
82
CAT. No. E1001N
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS
TM
AIchip
Low impedance, 5000-hours-life, 105℃
MZKSeries
-
◆STANDARD RATINGS
WV
(Vdc)
Cap
(µF)
Size code
Impedance
(Ωmax/20℃,100kHz)
Rated ripple current
(mArms/105℃,100kHz)
6.3
10
100
150
33
47
100
68
10
10
22
22
33
47
E61
F61
E61
E61
F61
F61
E61
F61
E61
F61
F61
F61
2.2
1.1
2.2
2.2
1.1
1.1
2.2
1.1
2.2
1.1
1.1
1.1
95
140
95
95
140
140
95
140
95
140
140
140
16
25
35
Part No.
EMZK6R3ADA101ME61G
EMZK100ADA151MF61G
EMZK160ADA330ME61G
EMZK160ADA470ME61G
EMZK160ADA101MF61G
EMZK250ADA680MF61G
EMZK350ADA100ME61G
EMZK350ADA100MF61G
EMZK350ADA220ME61G
EMZK350ADA220MF61G
EMZK350ADA330MF61G
EMZK350ADA470MF61G
◆RATED RIPPLE CURRENT MULTIPLIERS
・Frequency Multipliers
Frequency(Hz)
6.3 to 35Vdc
120
0.40
1k
0.75
10k
0.90
100k
1.00
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
83
CAT. No. E1001N
Similar pages