Taiyo Yuden FI212C245075-T Multilayer ceramic devices (balance type) Datasheet

Spec Sheet
PrintPDF
Multilayer Ceramic Devices (Balance Type)
FI212C245075-T
Features
Item Summary
Balance Type, 2.0x1.25x0.7mm
for Bluetooth
Lifecycle Stage
Mass Production
Standard packaging quantity (minimum)
Taping Embossed 3000
Products characteristics table
External Dimensions
Bluetooth
Dimension L
2.0 ±0.15 mm
Passband Frequency1 (f1)
2400 to 2500 MHz
Dimension W
1.25 ±0.15 mm
Insertion Loss2 (max)(in f1)
4 dB at 2400 to 2500MHz (-30 to +85 ℃)
Dimension T
Max 0.7 mm
Ripple1 (max)(in f1)
1 dB at 2400 to 2500MHz
VSWR1 (max)(in f1)
2.2 at 2400 to 2500MHz (Unbalanced port)
VSWR2 (max)(in f1)
2.2 at 2400 to 2500MHz (Balanced port)
Amplitude Balance (max)(in f1)
2.0 dB at 2400 to 2500MHz
Phase Balance (in f1)
180 ± 10 deg at 2400 to 2500MHz
Attenuation1 (min)(f1)
40 dB at 880 to 960MHz
Attenuation2 (min)(f1)
18 dB at 1710 to 1990MHz
Attenuation3 (min)(f1)
12 dB at 1990 to 2170MHz
Attenuation4 (min)(f1)
30 dB at 4800 to 5000MHz
Unbalanced port Impedance
50 Ω
Balanced port Impedance
Conjugated match to CSR BC5FM,BC6ROM
Operating Temp. Range
-30 to +85 ℃
RoHS2 Compliance (10 subst.)
Yes
REACH Compliance (181 subst.)
Yes
Halogen Free
Yes
Soldering
Reflow
System
2018.03.07
The data is reference only. Electrical characteristics vary depending on environment or measurement condition.
TAIYO YUDEN reserves the right to make change to the data at any time without notice.
Before making final selection, please check product specification.
http://www.ty-top.com
Powered by TCPDF (www.tcpdf.org)
■Notice for TAIYO YUDEN Products
Please read this notice before using the TAIYO YUDEN products.
!
■
REMINDERS
Please conduct validation and verification of our products in actual condition of mounting and operating environment before using our
products.
■
The product listed in this spec sheet is intended for use in general electronic equipment (e.g., AV equipment, OA equipment, home electric
appliances, office equipment, information and communication equipment including, without limitation, mobile phone, and PC). Please be sure
to contact TAIYO YUDEN for further information before using the products for any equipment which may directly cause loss of human life or
bodily injury (e.g., transportation equipment including, without limitation, automotive powertrain control system, train control system, and
ship control system, traffic signal equipment, disaster prevention equipment, medical equipment classified as Class I, II or III by IMDRF, highly
public information network equipment including, without limitation, telephone exchange, and base station).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g., aerospace equipment,
aviation equipment, medical equipment classified as Class IV by IMDRF, nuclear control equipment, undersea equipment, military equipment).
When our products are used even for high safety and/or reliability‐required devices or circuits of general electronic equipment, it is strongly
recommended to perform a thorough safety evaluation prior to use of our products and to install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way responsible for any damages
incurred by you or third parties arising from use of the product listed in this spec sheet for any equipment requiring inquiry to TAIYO YUDEN or
prohibited for use by TAIYO YUDEN as described above.
■
Information contained in this spec sheet is intended to convey examples of typical performances and/or applications of our products and is not
intended to make any warranty with respect to the intellectual property rights or any other related rights of TAIYO YUDEN or any third parties
nor grant any license under such rights.
■
Please note that the scope of warranty for our products is limited to the delivered our products themselves and TAIYO YUDEN shall not be in
any way responsible for any damages resulting from a fault or defect in our products. Notwithstanding the foregoing, if there is a written
agreement (e.g., supply and purchase agreement, quality assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will
warrant our products in accordance with such agreement.
■
The contents of this spec sheet are applicable to our products which are purchased from our sales offices or authorized distributors
(hereinafter “TAIYO YUDEN’s official sales channel”). Please note that the contents of this spec sheet are not applicable to our products
purchased from any seller other than TAIYO YUDEN’s official sales channel.
■
Caution for Export
The product listed in this spec sheet may require specific procedures for export according to “U.S. Export Administration Regulations”, “Foreign
Exchange and Foreign Trade Control Law” of Japan, and other applicable regulations. Should you have any questions on this matter, please
contact our sales staff.
Similar pages