JAE DX4R205JJA Usb 2.0 compatible micro connector Datasheet

COMPONENTS PRODUCT INFORMATION
NEW
USB 2.0 Compatible Micro Connectors
CONNECTOR
MB-0187-3
December 2014
DX4 Series
RoHS Compliant
On-board Type
Mid-mount Type
The DX4 Series is a set of connectors compatible with the Micro-USB type USB 2.0 for
small devices standardized by the USB Implementers Forum, Inc.
Features
Compatible with Universal Serial Bus Micro-USB Cables and Connectors Specification,
Revision 1.01.
Connector type: USB 2.0 compatible, Micro types
Au plating over Pd-Ni alloy is used for mating cycle durability and long product life.
Superior rigidity with high-strength stainless steel shell.
Available in a variety of versions to suit diverse device configurations.
Two-piece shell structure for mid-mount type to prevent contact failure due to flux
scattering during reflow.
Available in reinforced type, with reinforcement plate set in mating area to prevent
damage from plug caused by misaligned mating. (Refer to drawing below)
Reinforcement plate
of mating area
Mating Area Reinforced Type
*In the above drawing the shell is transparent for illustration purposes to show the
reinforcement plate.
General Specifications
No. of Contacts: 5 positions
Contact Resistance:
30m ohm max. (initial)
Dielectric Withstanding Voltage:
AC500Vrms per minute
Insulation Resistance: 1000M ohm (initial)
Rated Current: DC1.8A (Vbus, GND)
Others DC0.5A
Rated Voltage: AC30Vrms
Durability: 10,000 mating cycles
Operating temperature:
-30 Deg. C to +80 Deg. C
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
1/10
MB-0187-3
Materials and Finishes
Component
Material and Finish
Insulator
Synthetic Resin
Contact
Copper alloy / Contact area: Au flash plating over Pd-Ni alloy over Ni
Terminal area: Au flash plating over Ni
Shell
Stainless Steel / Sn plating over Ni
*For more information please refer to individual product drawings.
Ordering Information
DX4 R 0 05 J J 2 R1800
Reel: 1800 pcs. / reel
Series
DX4: USB2.0 Micro
Modification Code: #2
R: Receptacle
Plating Specification
J: Contact area: Au flash over Pd-Ni alloy over Ni
Modification Code: #1
Board Connection Type (Shell area)
J: Through-hole type, H: Hold-down type
No. of Contacts: 5 pos.
Micro-USB
Connector
Type
Type B
Type AB
SJ
Drawing
Specificat
ion
DX4R005JJ2 (Individual Unit)
SJ110578
DX4R005JJ2R1800 (Reel Unit)
SJ110579
JACS30162
DX4R005HJ5 (Individual Unit)
SJ111770
DX4R005HJ5R2000 (Reel Unit)
SJ111771
DX4R005JJ6 (Individual Unit)
SJ112420
DX4R005JJ6R1500 (Reel Unit)
SJ112421
DX4R005JJ7 (Individual Unit)
SJ112422
DX4R005JJ7R1500 (Reel Unit)
SJ112423
DX4RN05JJ3 (Individual Unit)
SJ112800
DX4RN05JJ3R2000 (Reel Unit)
SJ112801
DX4R105JJC (Individual Unit)
SJ113218
DX4R105JJCR1800 (Reel Unit)
SJ113219
DX4R205JJA (Individual Unit)
SJ112925
DX4R205JJAR1800 (Reel Unit)
SJ112926
DX4R305JJB (Individual Unit)
SJ112927
DX4R305JJBR1800 (Reel Unit)
SJ112928
DX4R205JJ8 (Individual Unit)
SJ112802
DX4R205JJ8R2000 (Reel Unit)
SJ112803
DX4R205JJ9 (Individual Unit)
SJ112804
DX4R205JJ9R2000 (Reel Unit)
SJ112805
Part Number
Mounting Type
Mating
Taper
Mating Area
Reinforcement
Plate
Yes
On-board
JACS30185
No
JACS30251
JACS30252
Standard
Mid-mount
No
JACS30257
No
JACS30281
JACS30267
Reverse
On-board
Yes
Standard
No
JACS30268
Reverse
JACS30258
JACS30259
Yes
No
(Standard
Type)
Yes
(Mating
Area
Reinforced
Type)
Yes
Mid-mount
Standard
No
Note: Please place orders in reel units.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
2/10
MB-0187-3
Standard Type (Micro-B): DX4R005JJ2
Unit: mm
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
3/10
MB-0187-3
Standard Type (Micro-B): DX4R005HJ5
Unit: mm
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
4/10
MB-0187-3
Standard Type (Micro-B): DX4R005JJ6
Unit: mm
Type without mating area taper (DX4R005JJ7)
*Design is same as DX4R005JJ6 except the mating
area taper.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
5/10
MB-0187-3
Mating Area Reinforced Type
(Micro-B): DX4RN05JJ3
Unit: mm
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
6/10
MB-0187-3
Mating Area Reinforced Type
(Micro-B): DX4R105JJC
Unit: mm
寸法単位:[mm]
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
7/10
MB-0187-3
Mating Area Reinforced Type (Micro-AB): DX4R205JJA
Unit: mm
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
8/10
MB-0187-3
Mating Area Reinforced Type (Micro-AB): DX4R305JJB
Unit: mm
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
9/10
MB-0187-3
Mating Area Reinforced Type
(Micro-AB): DX4R205JJ8
Type without mating area taper (DX4R205JJ9)
*Design is same as DX4R205JJ8 except the mating
area taper.
Unit: mm
Notice:
1. The values specified in this brochure are only for reference. The products and their specifications are subject to change without notice.
Contact our sales staff for further information before considering or ordering any of our products.
For purchase, a product specification must be agreed upon.
2. Users are requested to provide protection circuits and redundancy circuits to ensure safety of the equipment, and sufficiently review the
suitability of JAE's products to the equipment.
3. The products presented in this brochure are designed for the uses recommended below.
We strongly suggest you contact our sales staff when considering use of any of the products in any other way than the recommended
applications or for a specific use that requires an extremely high reliability.
(1) Applications that require consultation:
(i) Please contact us if you are considering use involving a quality assurance program that you specify or that is peculiar to the industry,
such as:
Automotive electrical components, train control, telecommunications devices (mainline), traffic light control, electric power, combustion
control, fire prevention or security systems, disaster prevention equipment, etc.
(ii) We may separately give you our support with a quality assurance program that
you specify, when you think of a use such as :
Aviation or space equipment, submarine repeaters, nuclear power control systems, medical equipment for life support, etc.
(2) Recommended applications include:
Computers, office appliances, telecommunications devices (terminals, mobile units), measuring equipment, audiovisual equipment, home
electric appliances, factory automation equipment, etc
Product Marketing Division
Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539
Phone: +81-3-3780-2882 FAX: +81-3-3780-2946
* The specifications in this brochure are subject to change without notice. Please contact JAE for information.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
10/10
Similar pages