PHILIPS FI1216MK2/HM/PH Desktop video tuner system ccir b/g Datasheet

DISPLAY COMPONENTS
DATA SHEET
FI1216MK2
Desktop video tuner
system CCIR B/G
Preliminary specification
Supersedes data of 1996 Feb 16
File under Display Components, DC03
1997 Mar 13
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
FEATURES
• System CCIR B/G
• True 5 V device (low power dissipation)
• Full frequency range from channel 2 (48.25 MHz) to
channel 69 (855.25 MHz)
• PLL controlled tuning
The analog AFC voltage is fed to the 5-level A/D converter
in the PLL tuning IC, so that the AFC status can be read
via the I2C-bus.
• True-synchronous vision IF demodulator (PLL)
• Demodulated video output, AF sound output, second
sound IF output
• I2C-bus control of tuning, address selection, AFC status
information
ORDERING INFORMATION
• Complies with European regulations on radiation, signal
handling and immunity (“CENELEC 55020, 55013’’ and
‘‘Amtsblatt 15/92”)
TYPE
CATALOGUE
NUMBERS
FI1216MK2/HM/PH standard phono 3139 147 13291
FI1216MK2/HM/IEC IEC
3139 147 13301
• Small horizontally mounted metal housing.
MARKING
DESCRIPTION
The following items of information are printed on a sticker
that is on the top cover of the tuner:
The FI1200MK2 family consists of the following types
FI1216MK2, FI1246MK2, FI1256MK2. They are designed
to meet a wide range of RF applications in the PC
Multi-Media environment.
• Type number
• Code number
• Origin letter of factory
The FI1216MK2 types are available with a single 75 Ω
input for TV reception. The input connector is available in
either standard phono (female socket) or IEC (female
socket).
• Change code
• Year and week code.
The tuning and bandswitching are performed through the
built-in digitally controlled I2C-bus. All front-ends meet the
input immunity and radiation of CENELEC.
INTERMEDIATE FREQUENCIES
The FI1216MK2 consists of a tuner section and an IF
section, which are all designed on a single PCB. The
front-end is assembled in a metal housing made of a
rectangular tin plated steel frame with front and rear covers
which have soldered contacts to the frame. A single phono
or IEC aerial socket is mounted on one side of the frame.
All other connections are made via pins at the bottom.
SYSTEM
FREQUENCY(1)
(MHz)
PAL B/G
Picture carrier
Colour
Sound 1
Sound 2
NICAM
The tuner section is equipped with 3 tuned RF MOSFET
input stages, with a 3-band mixer-oscillator IC, containing
the oscillators, mixers and IF amplifier. Tuning and band
switching in the tuner section are done with a digital
programmable PLL tuning system. This enables tuning
with step-size programmable between 31.25,
50.0 or 62.5 kHz. A DC-DC converter is built around the
PLL synthesizer IC to provide the tuning voltage, thus
making the FI1216MK2 front-end a true 5 V device.
38.90
34.47
33.40
33.16
33.05
Note
1. The oscillator frequency is above the input signal
frequency.
CHANNEL COVERAGE
BAND
Low band
Mid band
High band
The IF section uses a true-synchronous vision IF
demodulator (PLL) with an intercarrier SAW filter in front
of it.
1997 Mar 13
DESCRIPTION
2
CHANNELS
48.25 to 170.00 MHz
170.00 to 450.00 MHz
450.00 to 855.25 MHz
1997 Mar 13
3
DC - DC
VT
11
15
SDA AS
14
+ADC
Fig.1 Electrical block diagram.
SCL
13
PLL
LOW
OSC.
BAND
MID
OSC.
BAND
HIGH
OSC.
BAND
MIXER - OSCILLATOR IC
IF
(+5 V)
VIF
24
FILTER
2nd IF
sound
output
22
TRAP
VIF PLL DEMODULATOR
VCO
CVBS
23
AF
sound
output
MLC279 - 1
25
Desktop video tuner
system CCIR B/G
(+5 V)
VS
12
AGC
LOW BAND
MID BAND
HIGH BAND
Philips Components
Preliminary specification
FI1216MK2
BLOCK DIAGRAM
handbook, full pagewidth
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
PINNING
SYMBOL
PIN
DESCRIPTION
VT
11
tuning voltage (monitor)
VS
12
supply voltage tuner section +5 V
SCL
13
I2C-bus serial clock
SDA
14
I2C-bus serial data
AS
15
I2C-bus address select
n.c.
21
not connected
22
second IF sound output
CVBS
23
Composite Video Baseband Signal output
VIF
24
supply voltage IF section +5 V
AF sound output
25
AF sound output
2nd IF
sound output
−
1997 Mar 13
TH1, TH2, TH3 and TH4
mounting tags (ground)
4
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
LIMITING VALUES
Limiting values under operational conditions
The tuner can be guaranteed to function properly under the following conditions.
SYMBOL
PARAMETER
VS
supply voltage
VS(ripple)
peak-to-peak ripple voltage susceptibility
(at 5 V ±5%); note 1
PIN
supply current
VSCL
SCL bus input voltage
VSDA
SDA bus input voltage
ISDA
SDA bus current (open collector)
VAS
address select voltage; note 2
ZIF
2nd IF sound output load impedance:
−
20
mV
−
−
10
mV
−
−
120
mA
−0.3
−
+5.25
V
−0.3
−
+5.25
V
−1
−
+5
mA
15
−
−
+5.25
V
22
0.5
−
−
kΩ
0.5
−
−
kΩ
−
75
−
Ω
14
AC
ZCVBS
5.25
UNIT
−
13
DC
MAX.
5.00
>100 kHz to 500 kHz
IS
TYP.
4.75
12
20 Hz to 100 kHz
MIN.
V
Composite Video Baseband Signal load
impedance:
DC
23
−
75
−
Ω
tL
load time constant
−
−
100
ns
VIF
IF supply voltage
4.75
5.0
5.25
V
VIF(ripple)
peak-to-peak ripple voltage susceptibility
(at 5 V ±5%); note 1
−
−
20
mV
−
−
10
mV
−
−
100
mA
1.0
−
−
kΩ
0.6
−
−
kΩ
AC
24
20 Hz to 100 kHz
>100 kHz to 500 kHz
IIF
IF supply current
ZAF
AF sound output load impedance:
DC
25
AC
Notes
1. Sinusoidal ripple voltage superimposed on the 5 V supply voltage in the frequency range of 20 Hz to 500 kHz.
Criteria for TV interference >57 dB.
2. For detailed information about the address decoding, refer to Chapter “Application information”.
1997 Mar 13
5
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
Environmental conditions
SYMBOL
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNIT
Non-operational conditions
−25
−
+85
°C
−
−
100
%
−
−
245
m/s2
50 g
−
−
490
m/s2
10 to 55 Hz
−
0.35
−
mm
Tamb
ambient temperature
RH
relative humidity
gB
bump acceleration
25 g
gS
shock acceleration
vibration amplitude
Operational conditions
Tamb
ambient temperature
−10
−
+60
°C
RH
relative humidity
−
−
95
%
OVERALL PERFORMANCE
Conditional data
Unless otherwise specified, all electrical values for Chapter “Overall performance” apply at the following conditions.
SYMBOL
PARAMETER
VALUE
UNIT
Tamb
ambient temperature
25 ±5
°C
RH
relative humidity
60 ±15
%
VS
supply voltage (tuner and IF section)
5 ±0.125
V
ZCVBS
video output load impedance (DC)
>75
Ω
ZIF
IF sound output load impedance (DC)
>500
Ω
tpr
pre-heating time (+5 V at pin 24)
10
minute
ZS(AE)
aerial source impedance (unbalanced)
75
Ω
1997 Mar 13
6
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
TUNER SECTION
Tuner characteristics
For detailed information about the PLL programming, refer to Chapter “Application information”.
The desktop video tuner is guaranteed to function properly within the specified operational conditions, but a certain
deterioration of performance parameters may occur at the limits of the operational conditions.
Test equipment
EQUIPMENT
PARAMETER
DC voltmeter
input impedance
Oscilloscope
input impedance:
VALUE
UNIT
>1
MΩ
resistance
>1
MΩ
capacitance
<15
pF
Spectrum analyzer
input impedance
50
Ω
FET probe
input impedance:
resistance
1
MΩ
capacitance
1997 Mar 13
3.5
pF
output impedance
50
Ω
voltage gain
0
dB
7
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
handbook, full pagewidth
FI1216MK2
aerial
connector
TP2
TP3
11 12 13 14 15
IF
output
22 23 24 25
IF
PROBE
OUT
1
nF
VT
BU2
VS
3
kΩ
SCL
SDA
33
µF
10 nF
TEST JIG
BU5 BU4
BU2
video
out
BU6
+5 V
P
1
kΩ
51
nF
(2)
(1)
SA
DA
CCA010
(1) BU4 loaded with 75 Ω.
(2) 50 µs de-emphasis.
SA = spectrum analyzer.
P = FET probe.
DA = distortion analyzer.
Fig.2 Typical test set up.
1997 Mar 13
8
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
Definitions of test signals (see Fig.2)
TEST SIGNAL
FREQ.
(MHz)
MODULATION
AMPLITUDE
VIDEO
A0: unmodulated vision
carrier
480.25
60 dBµV
A1: CCIR B/G standard signal
with video modulation
480.25
60 dBµV
(top sync)
B1: unmodulated sound
carrier B/G system
485.75
−13 dB w.r.t.
A0 to A1
B2: FM modulated sound
carrier B/G system
485.75
−13 dB w.r.t.
A0 to A1
B3: unmodulated sound
carrier B/G system
478.75
−13 dB w.r.t.
A0 to A1
AUDIO
100% (rest carrier 10%)
2T pulse and bar
1 kHz; modulation frequency
deviation ±27 kHz;
50 µs pre-emphasis
Aerial input characteristics
SYMBOL
PARAMETER
VSWR
reflection coefficient
VPSM
surge protection voltage
Vant
antenna connection
disturbance voltage
1997 Mar 13
CONDITIONS
MIN.
MAX.
UNIT
referred to 75 Ω impedance (worst case on or between −
picture and sound carrier at maximum gain)
5
5
−
kV
−
46
dBµV
<1.75 GHz
9
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
General characteristics
SYMBOL
fb
∆fb
αi
αIF
ZIF
αS
mx
Vosc
tli
αvs
VESD
PARAMETER
frequency range:
low band
mid band
high band
margin:
for low band
for mid/high band
image rejection (nominal gain to 10 dB
gain reduction):
low band
mid band
mid band
high band
IF rejection (picture)
1⁄ IF susceptibility:
2
E2 to E12
E21 to E69
sound-chrominance moiré rejection:
off-air
UHF
cross modulation:
in-channel
in-band
low band (n ±2)
mid band (n ±3)
high band (n ±5)
out of band
breakthrough susceptibility:
E2 to E12; E21 to E69
oscillator voltage at all pins
oscillators lock-in time
the video signal-to-sound interference
ratio with the tuner exposed to sound
signals in the audio frequency range
100 Hz to 10 kHz and sound pressure
levels up to 105 dB (20 µPa)
electrostatic discharge (ESD)
on all pins
CONDITIONS
<300 MHz
>300 MHz
up to 40 dB gain control
up to 30 dB minimum
gain control
charge pump set logic
HIGH
note 1
MIN.
TYP.
MAX.
UNIT
48.25
175.25
455.25
−
−
−
168.25
447.25
855.25
MHz
MHz
MHz
1.5
3
−
−
−
−
MHz
MHz
70
66
60
50
60
−
−
−
−
−
−
−
−
−
−
dB
dB
dB
dB
dB
75
60
−
−
−
−
dBµV
dBµV
56
56
−
−
−
−
dB
dB
70
−
−
dBµV
78
78
84
−
−
−
−
100
−
−
−
−
dBµV
dBµV
dBµV
dBµV
60
−
−
−
−
−
−
70
150
dBµV
dBµV
ms
40
−
−
dB
2
−
−
kV
Note
1. All the pins of the desktop video tuner are protected against electrostatic discharge (ESD) up to 2 kV. The product is
classified in category B (‘‘MIL-STD-883C”).
1997 Mar 13
10
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
Video and audio characteristics (see Fig.2)
PARAMETER
TEST SIGNAL
TEST
POINT
MIN. TYP. MAX.
UNIT
CVBS characteristics:
video amplitude signal at pin 23
A1 (peak-to-peak value)
BU4
0.7
−
1.1
V
DC level sync pulse at pin 23
A1
BU4
−
0.35
−
V
A1
BU4
−1.0
−
+1.0
dB
Video amplitude drop with respect to modulation
0.1 MHz at Tamb = 45 °C:
at 1 MHz
at 2 MHz
A1
BU4
−1.5
−
+1.5
dB
at 3 MHz
A1
BU4
−2.5
−
+1.5
dB
at 4 MHz
A1
BU4
−3.0
−
+2.0
dB
at 4.43 MHz
A1
BU4
−4.0
−
+2.0
dB
Sound carrier rejection
A1 (1 MHz) + B1
BU4
40
−
−
dB
Residual 40.4 MHz signal in video channel:
level of 1.5 MHz
A1 + B3
BU4
−
−
68
dBµV
Residual 77.8 MHz signal in video channel
A1
BU4
−
−
80
dBµV
Second IF sound output level at level of 5.5 MHz
A1 + B1
BU5
84
−
−
dBµV
2T pulse/bar response
A1
BU4
−2.5
−
+2.5
%
2T pulse response
Test on 2T pulse at Tamb = 45 °C:
A1
BU4
−
−
+3.0
%
CVBS S/N (unweighted)
A1 + B1
BU4
41
−
−
dB
Gain limited sensitivity at 1 dB reduction
of video output
A1
BU4
−
−
30
dBµV
AF output level measured via LP 20 kHz filter,
RMS detector, 50 µs de-emphasis
A1 + B2
BU6
0.25
0.35
0.50
V
THD (Total Harmonic Distortion) measured via
LP 20 kHz filter, RMS detector, 50 µs
de-emphasis
A1 + B2
BU6
−
−
0.5
%
S/N measured via CCIR filter, peak
CCIR detector, 50 µs de-emphasis
A1 (6 kHz sine wave,
black-to-white) + B1
BU6
41
−
−
dB
AF 3 dB response measured via LP 20 kHz filter,
RMS detector, de-emphasis off
A1 (black) + B1
BU6
16
−
−
kHz
AM suppression ratio
A1 + B2
BU6
40
−
−
dB
Audio characteristics:
Digital AFC status
PARAMETER
ADC word at I2C-bus during read operation
1997 Mar 13
CONDITIONS
FREQUENCY
DIGITAL
(kHz)
READ-OUT
input voltage at pin 10: 0.0 to 0.15VS
−125
input voltage at pin 10: 0.15 to 0.30VS
−62.5
01
input voltage at pin 10: 0.30 to 0.45VS
0
02
input voltage at pin 10: 0.45 to 0.60VS
+62.5
03
input voltage at pin 10: 0.60 to 1.00VS
+125
04
11
00
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
APPLICATION INFORMATION
A detailed description of the I2C-bus specification, with applications, is given in brochure ‘‘The I2C-bus and how to
use it’’. This brochure may be ordered using the code number 9398 393 40011.
WRITE mode
BITS
BYTE
7
MSB
6
5
4
3
2
1
0
LSB
A(1)
Address byte
1
1
0
0
0
MA1
MA0
0
A
Program divider byte 1
0
n14
n13
n12
n11
n10
n9
n8
A
Program divider byte 2
n7
n6
n5
n4
n3
n2
n1
n0
A
Control information byte 1
1
CP
T2
T1
T0
RSA
RSB
OS
A
Control information byte 2
P7
P6
P5
P4
P3
P2
P1
P0
A
Note
1. A = Acknowledge.
ADDRESS SELECTION
VS = +5 V (PLL supply voltage).
MA1
MA0
ADDRESS
VOLTAGE AT PIN 15
0
0
C0
0.0VS to 0.1VS
0
1
C2
0.2VS to 0.3VS
1
0
C4
0.4VS to 0.6VS
1
1
C6
0.9VS to 1.0VS
PROGRAMMABLE DIVIDER SETTINGS (BYTES 1 AND 2)
Divider ratio:
N = 16 × {fRF(pc) + fIF(pc)}, where (pc) is picture carrier and fRF and fIF are expressed in MHz
fosc = N⁄16 (MHz).
N = (8192 × n13) + (4096 × n12) + (2048 × n11) + (1024 × n10) + (512 × n9) + (256 × n8) + (128 × n7) + (64 × n6) +
(32 × n5) + (16 × n4) + (8 × n3) + (4 × n2) + (2 × n1) + n0
CONTROL BYTE
Charge pump settings:
CP = 1, for fast tuning
CP = 0, for moderate speed tuning with slightly better residual oscillator FM.
Test mode settings:
T2 = T1 = 0; T0 = 1, for normal operation.
PLL disabling:
OS = 0, for normal operation
OS = 1, for switching the charge pump to the high impedance state.
1997 Mar 13
12
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
Ratio select bits
RSA
X
0
1
RSB
0
1
1
STEP SIZE
50 kHz
31.25 kHz (for slow picture search)
62.5 kHz (for normal picture search)
PORTS BYTE
Band switching
BAND
BIT(1)
P0
P1
P2
P3(2)
P4
P5
P6
P7
0
0
0
0
0
0
0
0
0
X
X
X
0
1
1
1
0
1
0
0
0
1
1
0
Low band
Mid band
High band
Notes
1. X = don’t care; P0 to P7 are output ports on the PLL device.
2. P3 is a system switch output for customer applications.
TELEGRAM EXAMPLES (WRITE MODE)
Start - Adb - Ack - Db1 - Ack - Db2 - Ack - Cb - Ack - Pb - Ack - Stop.
Start - Adb - Ack - Cb - Ack - Pb - Ack - Db1 - Ack - Db2 - Ack - Stop.
Start - Adb - Ack - Db1 - Ack - Db2 - Ack - Cb - Ack - Stop.
Start - Adb - Ack - Db1 - Ack - Db2 - Ack - Stop.
Where:
Start = start condition
Adb = address byte
Ack = acknowledge
Db1 = divider byte 1
Db2 = divider byte 2
Cb = control byte
Pb = ports byte
Stop = stop condition.
Remark: for channel selection involving band switching, and to ensure smooth tuning to the desired channel without
causing unnecessary charge pump action, it is recommended to consider the difference between wanted channel
frequency (fw) and the current channel frequency (fc):
• If fw > fc, use telegram as:
Start - Adb - Ack - Db1 - Ack - Db2 - Ack - Cb - Ack - Pb - Ack - Stop.
• If fw < fc, use telegram as:
Start - Adb - Ack - Cb - Ack - Pb - Ack - Db1 - Ack - Db2 - Ack - Stop.
Unnecessary charge pump action will result in very low tuning voltage (VT ≈ 0 V) which may drive the oscillator to extreme
conditions.
1997 Mar 13
13
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
READ mode
The in-lock can be read by setting the R/W bit to 1.
BITS
BYTE
Address byte
Status byte
7
MSB
6
5
4
3
2
1
0
LSB
A(5)
1
1
0
0
0
MA1
MA0
1
A
POR(1)
FL(2)
I2(3)
I1(3)
I0(3)
A2(4)
A1(4)
A0(4)
A
Notes
1. POR = Power On Reset. POR is internally set to 1 in case VS drops below 3 V. The POR bit is reset when an end of
data is detected by the PLL IC.
2. FL = In-lock flag; FL = 1: loop is phase-locked. The loop must be phase-locked during at least 8 periods of the internal
7.8125 kHz reference frequency before the FL flag is internally set to 1.
3. I2, I1 and I0 = digital information for I/O ports P2, P1 and P0 respectively.
4. A2, A1 and A0 = built-in 5-level A/D converter on I/O port P6. AFC information to the controller of the IF section is
available on pin 10 (see Table “Digital AFC status”).
5. A = Acknowledge.
TELEGRAM EXAMPLES (READ MODE)
Start - Adb - Ack - STB - Ack - STB - - Stop (no Ack from processor = End-of-data).
Start - Adb - Ack - STB - - Stop (no Ack from processor = End-of-data).
Where:
STB = Status byte.
Video buffer
A video buffer is built into the video module to enable the
unit to drive a 75 Ω load directly. In case it is required to
use the FI1216MK2 as a replacement for the FI1216 in the
same videocard, it is necessary to replace the 75 Ω series
resistor in the video card by a 0 Ω series resistor. At the
same time the 22 kΩ series resistor in the tuning supply
must be removed.
handbook, halfpage
VCC
R1
R3
100 Ω
R2
15
AS
C1
56 pF
I2C-bus load
The FI1216MK2 contains a series resistor (R = 100 Ω) in
the SCL and SDA lines. Both lines also have a capacitive
load of typical 56 pF (see Fig.3).
R4
C2
56 pF 14
100 Ω
R5
100 Ω
PLL IC
13
SDA
SCL
C3
56 pF
MBH031
Fig.3 I2C-bus load.
1997 Mar 13
14
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
MECHANICAL DATA
33.7
handbook, full pagewidth
+0.2
0
25.9
20.6
16.6
15.8
10.4
9.7 11.5
30.8
31.6 34.2
27.6
(1)
+0.2
0
8.1
± 0.3
26.9
(1)
∅ 8.35
78.4
STANDARD PHONO CONNECTOR
2.5
2
0.8
0.5
5.1
14.4
± 0.2
(2)
7.9
∅ 11
4
14.7
IEC CONNECTOR
59.2
13.5 max
∅ 6.35
+0.10
−0.04
(0.6)
12.9 max
5.2
6
(2×)
1.5 (2×)
1
1.5
(2×)
TH2
8.5
± 0.2
34.7
45.4
∅ 3 (2×)
2.6
41
2.6
TH4
TH3
11
12 13 14 15
21 22
0.64 × 0.64
23 24 25
1.1
5
4.445
84.5
89.2
Dimensions in mm.
(1) Standard phono socket female 75 Ω.
(2) Alternative IEC connection.
Fig.4 Mechanical outline FI-versions.
1997 Mar 13
38.5
28.55
15
MGB515 - 1
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
Aerial connections
Mass
Standard-phono socket female 75 Ω or IEC (female).
Approximately 50 g.
Solderability
Robustness of pins
The solderability of pins and mounting tags when tested
initially and after 16 hours steam ageing in accordance
with ‘‘IEC 68-2-20’’, test Ta, method 1 (solder bath 235 °C
for 2 s), results in a wetted area of 95%. No de-wetting will
occur when soldered at 260 °C for 5 s.
The pins will not be damaged when tested in accordance
with ‘‘IEC 68-2-21’’ :
Resistance to soldering heat
Punching pattern of chassis PCB
The product will not be damaged when tested in
accordance with ‘‘IEC 68-2-20’’, test Tb, method 1A
(solder bath 260 °C for 10 ±1 s).
Field rejects are often related to broken tag joints.
Therefore, the following punching pattern is recommended
(see Fig.5).
• Test Ua1, tensile of 10 N in axial direction
• Test Ua2, thrust of 4 N in axial direction.
78.4
handbook, full pagewidth
3.4
2.3
0.9
2
34.7
unit
contour
∅ 2.1
∅ 1.1
2.6
14.7
MGB514 - 1
4.445
59.2
Dimensions in mm.
Fig.5 Punching pattern seen from solder side.
1997 Mar 13
16
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
TV CHANNEL FREQUENCIES (MHz)
CCIR cable
Vision IF = 38.90 MHz; sound IF = 33.40 MHz.
CHANNEL
FREQ.
RANGE
PICTURE
SOUND
CARRIER
CARRIER
FREQUENCY FREQUENCY
CHANNEL
FREQ.
RANGE
PICTURE
SOUND
CARRIER
CARRIER
FREQUENCY FREQUENCY
E2
47-54
48.25
53.75
S15
258-265
259.25
264.75
E3
54-61
55.25
60.75
S16
265-272
266.25
271.75
E4
61-68
62.25
67.75
S17
272-279
273.25
278.75
S01
68-75
69.25
74.75
S18
279-286
280.25
285.75
S02
75-82
76.25
81.75
S19
286-293
287.25
292.75
S03
82-89
83.25
88.75
S20
293-300
294.25
299.75
S1
104-111
105.25
110.75
S21
302-310
303.25
308.75
S2
111-118
112.25
117.75
S22
310-318
311.25
316.75
S3
118-125
119.25
124.75
S23
318-326
319.25
324.75
S4
125-132
126.25
131.75
S24
326-334
327.25
332.75
S5
132-139
133.25
138.75
S25
334-342
335.25
340.75
S6
139-146
140.25
145.75
S26
342-350
343.25
348.75
S7
146-153
147.25
152.75
S27
350-358
351.25
356.75
S8
153-160
154.25
159.75
S28
358-366
359.25
364.75
S9
160-167
161.25
166.75
S29
366-374
367.25
372.75
S10
167-174
168.25
173.75
S30
374-382
375.25
380.75
E5
174-181
175.25
180.75
S31
382-390
383.25
388.75
E6
181-188
182.25
187.75
S32
390-398
391.25
396.75
E7
188-195
189.25
194.75
S33
398-406
399.25
404.75
E8
195-202
196.25
201.75
S34
406-414
407.25
412.75
E9
202-209
203.25
208.75
S35
414-422
415.25
420.75
E10
209-216
210.25
215.75
S36
422-430
423.25
428.75
E11
216-223
217.25
222.75
S37
430-438
431.25
436.75
E12
223-230
224.25
229.75
S38
438-446
439.25
444.75
S11
230-237
231.25
236.75
S39
446-454
447.25
452.75
S12
237-244
238.25
243.75
S40
454-462
455.25
460.75
S13
244-251
245.25
250.75
S41
462-470
463.25
468.75
S14
251-258
252.25
257.75
1997 Mar 13
17
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
CCIR B/G
Vision IF = 38.90 MHz; sound IF = 33.40 MHz.
CHANNEL
FREQ.
RANGE
PICTURE
SOUND
CARRIER
CARRIER
FREQUENCY FREQUENCY
CHANNEL
FREQ.
RANGE
PICTURE
SOUND
CARRIER
CARRIER
FREQUENCY FREQUENCY
2
47-54
48.25
53.75
40
622-630
623.25
628.75
3
54-61
55.25
60.75
41
630-638
631.25
636.75
4
61-68
62.25
67.75
42
638-646
639.25
644.75
5
174-181
175.25
180.75
43
646-654
647.25
652.75
6
181-188
182.25
187.75
44
654-662
655.25
660.75
7
188-195
189.25
194.75
45
662-670
663.25
668.75
8
195-202
196.25
201.75
46
670-678
671.25
676.75
9
202-209
203.25
208.75
47
678-686
679.25
684.75
10
209-216
210.25
215.75
48
686-694
687.25
692.75
11
216-223
217.25
222.75
49
694-702
695.25
700.75
12
223-230
224.25
229.75
50
702-710
703.25
708.75
21
470-478
471.25
476.75
51
710-718
711.25
716.75
22
478-486
479.25
484.75
52
718-726
719.25
724.75
23
486-494
487.25
492.75
53
726-734
727.25
732.75
24
494-502
495.25
500.75
54
734-742
735.25
740.75
25
502-510
503.25
508.75
55
742-750
743.25
748.75
26
510-518
511.25
516.75
56
750-758
751.25
756.75
27
518-526
519.25
524.75
57
758-766
759.25
764.75
28
526-534
527.25
532.75
58
766-774
767.25
772.75
29
534-542
535.25
540.75
59
774-782
775.25
780.75
30
542-550
543.25
548.75
60
782-790
783.25
788.75
31
550-558
551.25
556.75
61
790-798
791.25
796.75
32
558-566
559.25
564.75
62
798-806
799.25
804.75
33
566-574
567.25
572.75
63
806-814
807.25
812.75
34
574-582
575.25
580.75
64
814-822
815.25
820.75
35
582-590
583.25
588.75
65
822-830
823.25
828.75
36
590-598
591.25
596.75
66
830-838
831.25
836.75
37
598-606
599.25
604.75
67
838-846
839.25
844.75
38
606-614
607.25
612.75
68
846-854
847.25
852.75
39
614-622
615.25
620.75
69
854-862
855.25
860.75
1997 Mar 13
18
Philips Components
Preliminary specification
Desktop video tuner
system CCIR B/G
FI1216MK2
Italy
Vision IF = 38.90 MHz; sound IF = 33.40 MHz.
CHANNEL
PICTURE CARRIER FREQUENCY
SOUND CARRIER FREQUENCY
A
53.75
59.25
B
62.25
67.75
C
82.25
87.75
D
175.25
180.75
E
183.75
189.25
F
197.25
192.75
G
201.25
206.75
H
210.25
215.75
H1
217.25
222.75
H2
224.25
229.75
DEFINITIONS
Data sheet status
Objective specification
This data sheet contains target or goal specifications for product development.
Preliminary specification
This data sheet contains preliminary data; supplementary data may be published later.
Product specification
This data sheet contains final product specifications.
Application information
Where application information is given, it is advisory and does not form part of the specification.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
PURCHASE OF PHILIPS I2C COMPONENTS
Purchase of Philips I2C components conveys a license under the Philips’ I2C patent to use the
components in the I2C system provided the system conforms to the I2C specification defined by
Philips. This specification can be ordered using the code 9398 393 40011.
1997 Mar 13
19
Philips Components – a worldwide company
Argentina: Ierod, BUENOS AIRES,
Tel. (01) 786 7635, Fax. (01) 786 9397.
Pakistan: Philips Electrical Industries of Pakistan Ltd., KARACHI,
Tel. (021) 587 4641-49, Fax. (021) 577 035/587 4546.
Australia: Philips Components Pty Ltd, NORTH RYDE,
Tel. (02) 9805 4455, Fax. (02) 9805 4466.
Philippines: Philips Semiconductors Philippines Inc.,
METRO MANILA, Tel. (02) 816 6380, Fax. (02) 817 3474.
Austria: Österreichische Philips Industrie GmbH, WIEN,
Tel. (01) 601 01 12 41, Fax. (01) 60 101 12 11.
Poland: Philips Poland Sp. z.o.o., WARSZAWA,
Tel. (022) 612 2594, Fax. (022) 612 2327.
Belarus: Philips Office Belarus, MINSK,
Tel. (5172) 200 915, Fax. (5172) 200 773.
Portugal: Philips Portuguesa S.A.,
Philips Components: LINDA-A-VELHA,
Tel. (01) 416 3160/416 3333, Fax. (01) 416 3174/416 3366.
Benelux: Philips Nederland B.V., EINDHOVEN, NL.,
Tel. (+31 40) 2783 749, Fax. (+31 40) 2788 399.
Brazil: Philips Components, SÃO PAULO,
Tel. (011) 821 2333, Fax. (011) 829 1849.
Canada: Philips Electronics Ltd., SCARBOROUGH,
Tel. (0416) 292 5161, Fax. (0416) 754 6248.
China: Philips Company, SHANGHAI,
Tel. (021) 6485 0600, Fax. (021) 6485 5615.
Colombia: Iprelenso Ltda, SANTAFE DE BOGOTA,
Tel. (01) 345 8713, Fax. (01) 345 8712.
Denmark: Philips Components A/S, COPENHAGEN S,
Tel. (32) 883 333, Fax. (31) 571 949.
Finland: Philips Components, ESPOO,
Tel. 9 (0)-615 800, Fax. 9 (0)-615 80510.
France: Philips Composants, SURESNES,
Tel. (01) 4099 6161, Fax. (01) 4099 6427.
Germany: Philips Components GmbH, HAMBURG,
Tel. (040) 2489-0, Fax. (040) 2489 1400.
Greece: Philips Hellas S.A., TAVROS,
Tel. (01) 4894 339/(01) 4894 239, Fax. (01) 4814 240.
Hong Kong: Philips Hong Kong, KOWLOON,
Tel. 2784 3000, Fax. 2784 3003.
India: Philips India Ltd., BOMBAY,
Tel. (022) 4938 541, Fax. (022) 4938 722.
Indonesia: P.T. Philips Development Corp., JAKARTA,
Tel. (021) 520 1122, Fax. (021) 520 5189.
Ireland: Philips Electronics (Ireland) Ltd., DUBLIN,
Tel. (01) 76 40 203, Fax. (01) 76 40 210.
Israel: Rapac Electronics Ltd., TEL AVIV,
Tel. (03) 6450 444, Fax. (03) 6491 007.
Italy: Philips Components S.r.l., MILANO,
Tel. (02) 6752 2531, Fax. (02) 6752 2557.
Japan: Philips Japan Ltd., TOKYO,
Tel. (03) 3740 5028, Fax. (03) 3740 0580.
Korea (Republic of): Philips Electronics (Korea) Ltd., SEOUL,
Tel. (02) 709 -1472, Fax. (02) 709 1480.
Malaysia: Philips Malaysia SDN Berhad
Components Division, PULAU PINANG,
Tel. (04) 657 0055, Fax. (04) 656 5951.
Mexico: Philips Components, EL PASO, U.S.A.,
Tel. (915) 772 4020, Fax. (915) 772 4332.
Russia: Philips Russia, MOSCOW,
Tel. (095) 247 9124, Fax. (095) 247 9132.
Singapore: Philips Singapore Pte Ltd., SINGAPORE,
Tel. 350 2000, Fax. 355 1758.
South Africa: S.A. Philips Pty Ltd., JOHANNESBURG,
Tel. (011) 470 5911, Fax. (011) 470 5494.
Spain: Philips Components, BARCELONA,
Tel. (93) 301 63 12, Fax. (93) 301 42 43.
Sweden: Philips Components AB, STOCKHOLM,
Tel. (+46) 8 632 2000, Fax. (+46) 8 632 2745.
Switzerland: Philips Components AG, ZÜRICH,
Tel. (01) 488 22 11, Fax. (01) 481 77 30.
Taiwan: Philips Taiwan Ltd., TAIPEI,
Tel. (02) 388 7666, Fax. (02) 382 4382.
Thailand: Philips Electronics (Thailand) Ltd., BANGKOK,
Tel. (02) 745 4090, Fax. (02) 398 0793.
Turkey: Türk Philips Ticaret A.S., GÜLTEPE/ISTANBUL,
Tel. (0212) 279 2770, Fax. (0212) 282 6707.
Ukraine: Philips Ukraine Ltd., KIEV,
Tel. (044) 268 7327, Fax. (044) 268 6323.
United Kingdom: Philips Components Ltd., DORKING,
Tel. (01306) 512 000, Fax. (01306) 512 345.
United States:
• Philips Components, JUPITER, FL,
Tel. (561) 745 3300, Fax. (561) 745 3600.
• For literature: (800) 447 3762.
• Display and Wire Wound Components, ANN ARBOR, MI,
Tel. (313) 996 9400, Fax. (313) 761 2776.
• Magnetic Products, SAUGERTIES, NY,
Tel. (914) 246 2811, Fax. (914) 246 0487.
Uruguay: Philips Components, MONTEVIDEO,
Tel. (02) 704 044, Fax. (02) 920 601.
For all other countries apply to: Philips Components,
Marketing Communications, P.O. Box 218, 5600 MD EINDHOVEN,
The Netherlands, Fax. +31-40-2724 547.
COD11
© Philips Electronics N.V. 1997
All rights are reserved. Reproduction in whole or in part is prohibited without the
prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or
contract, is believed to be accurate and reliable and may be changed without notice.
No liability will be accepted by the publisher for any consequence of its use. Publication
thereof does not convey nor imply any license under patent- or other industrial or
intellectual property rights.
New Zealand: Philips New Zealand Ltd., AUCKLAND,
Tel. (09) 849 4160, Fax. (09) 849 7811.
Norway: Norsk A/S Philips, OSLO,
Tel. (22) 74 8000, Fax. (22) 74 8341.
Printed in The Netherlands
Similar pages