Renesas NP48N055KLE-E2-AYNote1 Switching n-channel power mos fet Datasheet

To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
3.
4.
5.
6.
7.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
8.
9.
10.
11.
12.
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
DATA SHEET
MOS FIELD EFFECT TRANSISTOR
NP48N055ELE, NP48N055KLE
NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE
SWITCHING
N-CHANNEL POWER MOS FET
DESCRIPTION
These products are N-channel MOS Field Effect Transistors designed for high current switching applications.
<R>
ORDERING INFORMATION
PART NUMBER
NP48N055ELE-E1-AY
Note1, 2
NP48N055ELE-E2-AY
Note1, 2
NP48N055KLE-E1-AY
Note1
NP48N055KLE-E2-AY
Note1
NP48N055CLE-S12-AZ
Note1, 2
NP48N055DLE-S12-AY
Note1, 2
NP48N055MLE-S18-AY
Note1
NP48N055NLE-S18-AY
Note1
LEAD PLATING
PACKING
PACKAGE
TO-263 (MP-25ZJ) typ. 1.4 g
Pure Sn (Tin)
Tape 800 p/reel
TO-263 (MP-25ZK) typ. 1.5 g
Sn-Ag-Cu
Pure Sn (Tin)
TO-220 (MP-25) typ. 1.9 g
Tube 50 p/tube
Notes 1. Pb-free (This product does not contain Pb in the external electrode.)
2. Not for new design
TO-262 (MP-25 Fin Cut) typ. 1.8 g
TO-220 (MP-25K) typ. 1.9 g
TO-262 (MP-25SK) typ. 1.8 g
(TO-220)
FEATURES
• Channel temperature 175 degree rated
• Super low on-state resistance
RDS(on)1 = 17 mΩ MAX. (VGS = 10 V, ID = 24 A)
RDS(on)2 = 21 mΩ MAX. (VGS = 5 V, ID = 24 A)
(TO-262)
RDS(on)3 = 24 mΩ MAX. (VGS = 4.5 V, ID = 24 A)
• Low input capacitance
Ciss = 1970 pF TYP.
• Built-in gate protection diode
(TO-263)
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. D14095EJ5V0DS00 (5th edition)
Date Published October 2007 NS
Printed in Japan
1999, 2000, 2007
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
NP48N055ELE, NP48N055KLE, NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
Drain to Source Voltage (VGS = 0 V)
VDSS
55
V
Gate to Source Voltage (VDS = 0 V)
VGSS
±20
V
Drain Current (DC) (TC = 25°C)
ID(DC)
±48
A
ID(pulse)
±140
A
Drain Current (pulse)
Note1
Total Power Dissipation (TA = 25°C)
PT
1.8
W
Total Power Dissipation (TC = 25°C)
PT
85
W
Channel Temperature
Tch
175
°C
Tstg
−55 to +175
°C
Note2
IAS
46/27/10
A
Note2
EAS
2.1/73/100
mJ
Storage Temperature
Single Avalanche Current
Single Avalanche Energy
Notes 1. PW ≤ 10 μs, Duty cycle ≤ 1%
2. Starting Tch = 25°C, RG = 25 Ω, VGS = 20 → 0 V (see Figure 4.)
THERMAL RESISTANCE
Channel to Case Thermal Resistance
Rth(ch-C)
1.76
°C/W
Channel to Ambient Thermal Resistance
Rth(ch-A)
83.3
°C/W
2
Data Sheet D14095EJ5V0DS
NP48N055ELE, NP48N055KLE, NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE
ELECTRICAL CHARACTERISTICS (TA = 25°C)
CHARACTERISTICS
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
UNIT
Zero Gate Voltage Drain Current
IDSS
VDS = 55 V, VGS = 0 V
10
μA
Gate Leakage Current
IGSS
VGS = ±20 V, VDS = 0 V
±10
μA
Gate to Source Threshold Voltage
VGS(th)
VDS = VGS, ID = 250 μA
1.5
2.0
2.5
V
Forward Transfer Admittance
| yfs |
VDS = 10 V, ID = 24 A
13
25
Drain to Source On-state Resistance
RDS(on)1
VGS = 10 V, ID = 24 A
13
17
mΩ
RDS(on)2
VGS = 5 V, ID = 24 A
16
21
mΩ
RDS(on)3
VGS = 4.5 V, ID = 24 A
18
24
mΩ
Input Capacitance
Ciss
VDS = 25 V,
1970
3000
pF
Output Capacitance
Coss
VGS = 0 V,
250
380
pF
130
240
pF
f = 1 MHz
S
Reverse Transfer Capacitance
Crss
Turn-on Delay Time
td(on)
VDD = 28 V, ID = 24 A,
17
38
ns
tr
VGS = 10 V,
11
27
ns
54
110
ns
9.3
23
ns
VDD = 44 V, VGS = 10 V, ID = 48 A
40
60
nC
QG2
VDD = 44 V,
21
32
nC
QGS
VGS = 5 V,
7
nC
10
nC
IF = 48 A, VGS = 0 V
1.0
V
Rise Time
Turn-off Delay Time
td(off)
Fall Time
tf
Total Gate Charge
QG1
Gate to Source Charge
RG = 1 Ω
ID = 48 A
Gate to Drain Charge
QGD
Body Diode Forward Voltage
VF(S-D)
Reverse Recovery Time
trr
IF = 48 A, VGS = 0 V,
40
ns
Qrr
di/dt = 100 A/μs
55
nC
Reverse Recovery Charge
TEST CIRCUIT 1 AVALANCHE CAPABILITY
D.U.T.
RG = 25 Ω
PG.
VGS = 20 → 0 V
TEST CIRCUIT 2 SWITCHING TIME
D.U.T.
L
50 Ω
VGS
RL
Wave Form
RG
PG.
VDD
VGS
0
VGS
10%
90%
VDD
VDS
90%
BVDSS
IAS
90%
VDS
VGS
0
VDS
10%
0
10%
Wave Form
VDS
ID
τ
VDD
Starting Tch
τ = 1 μs
Duty Cycle ≤ 1%
td(on)
tr
ton
td(off)
tf
toff
TEST CIRCUIT 3 GATE CHARGE
D.U.T.
IG = 2 mA
PG.
50 Ω
RL
VDD
Data Sheet D14095EJ5V0DS
3
NP48N055ELE, NP48N055KLE, NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE
TYPICAL CHARACTERISTICS (TA = 25°C)
Figure2. TOTAL POWER DISSIPATION vs.
CASE TEMPERATURE
Figure1. DERATING FACTOR OF FORWARD BIAS
SAFE OPERATING AREA
PT - Total Power Dissipation - W
dT - Percentage of Rated Power - %
140
100
80
60
40
20
0
0
25
50
75
120
100
80
60
40
20
0
100 125 150 175 200
25
0
50
TC - Case Temperature - °C
100 125 150 175 200
Figure4. SINGLE AVALANCHE ENERGY
DERATING FACTOR
Figure3. FORWARD BIAS SAFE OPERATING AREA
120
ID(pulse)
100
)
on
GS
(
DS
RV
(
d
ite )
Lim0 V
1
=
Po
Lim wer
ite Dis
d
sip
0μ
s
1m
DC
=1
0μ
10
ID(DC)
10
PW
EAS - Single Avalanche Energy - mJ
1000
ID - Drain Current - A
75
TC - Case Temperature - °C
s
s
ati
on
1
Single pulse
TC = 25°C
0.1
0.1
1
10
100
100 mJ
73 mJ
80
IAS = 10 A
27 A
46 A
60
40
20
2.1 mJ
0
25
100
50
75
100
125
150
175
Starting Tch - Starting Channel Temperature - °C
VDS - Drain to Source Voltage - V
Figure5. TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH
rth(t) - Transient Thermal Resistance - °C/W
1000
100
Rth(ch-A) = 83.3°C/W
10
Rth(ch-C) = 1.76°C/W
1
0.1
Single pulse
0.01
10 μ
100 μ
1m
10 m
100 m
1
PW - Pulse Width - s
4
Data Sheet D14095EJ5V0DS
10
100
1000
NP48N055ELE, NP48N055KLE, NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE
Figure6. FORWARD TRANSFER CHARACTERISTICS
1000
Figure7. DRAIN CURRENT vs.
DRAIN TO SOURCE VOLTAGE
140
Pulsed
Pulsed
ID - Drain Current - A
ID - Drain Current - A
120
100
TA = −40°C
25°C
75°C
150°C
175°C
10
1
VGS = 10 V
100
5V
80
60
4.5 V
40
20
0.1
0
1
2
3
5
4
6
1.0
0
10
TA = 175°C
75°C
25°C
−40°C
0.1
0.01
0.01
0.1
1
10
100
RDS(on) - Drain to Source On-state Resistance - mΩ
ID - Drain Current - A
Figure10. DRAIN TO SOURCE ON-STATE
RESISTANCE vs. DRAIN CURRENT
40
Pulsed
30
VGS = 4.5 V
5V
10 V
20
10
0
1
10
100
1000
RDS(on) - Drain to Source On-state Resistance - mΩ
Figure8. FORWARD TRANSFER ADMITTANCE vs.
DRAIN CURRENT
100
VDS = 10 V
Pulsed
VGS(th) - Gate to Source Threshold Voltage - V
| yfs | - Forward Transfer Admittance - S
VGS - Gate to Source Voltage - V
1
3.0
2.0
4.0
VDS - Drain to Source Voltage - V
Figure9. DRAIN TO SOURCE ON-STATE RESISTANCE vs.
GATE TO SOURCE VOLTAGE
40
Pulsed
35
30
25
ID = 24 A
20
15
10
5
0
0
5
10
15
20
VGS - Gate to Source Voltage - V
Figure11. GATE TO SOURCE THRESHOLD VOLTAGE vs.
CHANNEL TEMPERATURE
3.0
VDS = VGS
ID = 250 μA
2.5
2.0
1.5
1.0
0.5
0
−50
0
50
100
150
Tch - Channel Temperature - °C
ID - Drain Current - A
Data Sheet D14095EJ5V0DS
5
Figure12. DRAIN TO SOURCE ON-STATE RESISTANCE vs.
CHANNEL TEMPERATURE
45
Pulsed
40
35
VGS = 4.5 V
5V
10 V
30
25
20
15
10
Figure13. SOURCE TO DRAIN DIODE
FORWARD VOLTAGE
1000 Pulsed
IF - Diode Forward Current - A
VGS = 10 V
10
0V
1
5
ID = 24 A
0
−50
0
50
100
0.1
0
150
0.5
Figure15. SWITCHING CHARACTERISTICS
1000
VGS = 0 V
f = 1 MHz
Ciss
1000
Coss
100
Crss
10
0.1
1
10
td(on), tr, td(off), tf - Switching Time - ns
10000
tf
100
td(off)
td(on)
tr
10
VDD = 28 V
VGS = 10 V
RG = 1 Ω
1
0.1
100
100
10
10
100
Figure17. DYNAMIC INPUT/OUTPUT CHARACTERISTICS
VDS - Drain to Source Voltage - V
trr - Reverse Recovery Time - ns
di/dt = 100 A/μs
VGS = 0 V
1
80
16
70
14
12
60
VDD = 44 V
28 V
11 V
50
10
VGS
40
8
6
30
4
20
VDS
10
2
ID = 48 A
0
0
10
20
30
QG - Gate Charge - nC
IF - Diode Forward Current - A
6
100
ID - Drain Current - A
Figure16. REVERSE RECOVERY TIME vs.
DIODE FORWARD CURRENT
1
0.1
10
1
VDS - Drain to Source Voltage - V
1000
1.5
1.0
VF(S-D) - Source to Drain Voltage - V
Tch - Channel Temperature - °C
Figure14. CAPACITANCE vs. DRAIN TO
SOURCE VOLTAGE
Ciss, Coss, Crss - Capacitance - pF
100
Data Sheet D14095EJ5V0DS
40
0
VGS - Gate to Source Voltage - V
RDS(on) - Drain to Source On-state Resistance - mΩ
NP48N055ELE, NP48N055KLE, NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE
NP48N055ELE, NP48N055KLE, NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE
PACKAGE DRAWINGS (Unit: mm)
Note
1.3 ± 0.2
10.0 ± 0.3
No plating
7.88 MIN.
4
2
3
1.4 ± 0.2
0.7 ± 0.2
2.54 TYP.
9.15 ± 0.3
8.0 TYP.
8.5 ± 0.2
1
5.7 ± 0.4
1.0 ± 0.5
4
4.45 ± 0.2
0.025 to
0.25
P.
.5R
0
TY
R
0.8
2.54 TYP.
P.
TY
0.5 ± 0.2
0.75 ± 0.2
0.5 ±
2.8 ± 0.2
1.Gate
2.Drain
3.Source
4.Fin (Drain)
1
2
1.Gate
2.Drain
2.5
3.Source
15.5 MAX.
5.9 MIN.
4
1
0.75 ± 0.1
2.54 TYP.
1.3 ± 0.2
12.7 MIN.
6.0 MAX.
1 2 3
0.5 ± 0.2
2.8 ± 0.2
0.75 ± 0.3
2.54 TYP.
2
3
1.0 ± 0.5
10 TYP.
Note
4.8 MAX.
1.3 ± 0.2
8.5 ± 0.2
1.3 ± 0.2
4.Fin (Drain)
12.7 MIN.
4.8 MAX.
φ 3.6 ± 0.2
10.0 TYP.
1.3 ± 0.2
3
4)TO-262 (MP-25 Fin Cut)
4
8ο
0.25
Note
10.6 MAX.
0.2
0 to
2.54
3)TO-220 (MP-25)
1.3 ± 0.2
2.54 ± 0.25
4.8 MAX.
10 TYP.
1.35 ± 0.3
2)TO-263 (MP-25ZK)
15.25 ± 0.5
1)TO-263 (MP-25ZJ)
3.0 ± 0.3
<R>
0.5 ± 0.2
2.8 ± 0.2
2.54 TYP.
1.Gate
2.Drain
3.Source
4.Fin (Drain)
2.54 TYP.
1.Gate
2.Drain
3.Source
4.Fin (Drain)
Note Not for new design
Data Sheet D14095EJ5V0DS
7
NP48N055ELE, NP48N055KLE, NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE
1 2 3
0.8 ± 0.1
0.5 ± 0.2
2.54 TYP.
2.5 ± 0.2
2.54 TYP.
1.Gate
2.Drain
3.Source
4.Fin (Drain)
1.3 ± 0.2
1.27 ± 0.2
3.1 ± 0.3
15.9 MAX.
1.27 ± 0.2
4
4.45 ± 0.2
10.1 ± 0.3
3
10.0 ± 0.2
13.7 ± 0.3
13.7 ± 0.3
1 2
4.45 ± 0.2
1.3 ± 0.2
3.1 ± 0.2
4
φ 3.8 ± 0.2
6.3 ± 0.3
2.8 ± 0.3
10.0 ± 0.2
1.2 ± 0.3
6)TO-262 (MP-25SK)
8.9 ± 0.2
5)TO-220 (MP-25K)
0.8 ± 0.1
0.5 ± 0.2
2.54 TYP.
2.5 ± 0.2
2.54 TYP.
1.Gate
2.Drain
3.Source
4.Fin (Drain)
EQUIVALENT CIRCUIT
Drain
Body
Diode
Gate
Gate
Protection
Diode
Remark
Source
The diode connected between the gate and source of the transistor serves as a protector against ESD.
When this device actually used, an additional protection circuit is externally required if a voltage exceeding
the rated voltage may be applied to this device.
8
Data Sheet D14095EJ5V0DS
NP48N055ELE, NP48N055KLE, NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE
<R>
TAPE INFORMATION
There are two types (-E1, -E2) of taping depending on the direction of the device.
Draw-out side
<R>
Reel side
MARKING INFORMATION
NEC
48N055
LE
<R>
Pb-free plating marking
Abbreviation of part number
Lot code
RECOMMENDED SOLDERING CONDITIONS
These products should be soldered and mounted under the following recommended conditions.
For soldering methods and conditions other than those recommended below, please contact an NEC Electronics
sales representative.
For technical information, see the following website.
Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html)
Soldering Method
Soldering Conditions
Infrared reflow
Maximum temperature (Package's surface temperature): 260°C or below
MP-25ZJ, MP-25ZK
Time at maximum temperature: 10 seconds or less
Time of temperature higher than 220°C: 60 seconds or less
Preheating time at 160 to 180°C: 60 to 120 seconds
Recommended
Condition Symbol
IR60-00-3
Maximum number of reflow processes: 3 times
Maximum chlorine content of rosin flux (percentage mass): 0.2% or less
Wave soldering
Maximum temperature (Solder temperature): 260°C or below
MP-25, MP-25K, MP-25SK,
Time: 10 seconds or less
MP-25 Fin Cut
Maximum chlorine content of rosin flux: 0.2% (wt.) or less
Partial heating
Maximum temperature (Pin temperature): 350°C or below
MP-25ZJ, MP-25ZK,
Time (per side of the device): 3 seconds or less
MP-25K, MP-25SK
Maximum chlorine content of rosin flux: 0.2% (wt.) or less
Partial heating
Maximum temperature (Pin temperature): 300°C or below
MP-25, MP-25 Fin Cut
Time (per side of the device): 3 seconds or less
THDWS
P350
P300
Maximum chlorine content of rosin flux: 0.2% (wt.) or less
Caution Do not use different soldering methods together (except for partial heating).
Data Sheet D14095EJ5V0DS
9
NP48N055ELE, NP48N055KLE, NP48N055CLE, NP48N055DLE, NP48N055MLE, NP48N055NLE
• The information in this document is current as of October, 2007. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
• NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
• Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
Similar pages