2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) DF59 Series DF59 floating amount ±0.5mm(X,Y, Z directions) OY^gZXi^dc ¤%#*bb MY^gZXi^dc ¤%#*bb Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. NY^gZXi^dc ¤%#*bb DF59S/SN floating amount Features ●Common to all series ±0.5mm(X,Y direction), ±0.2mm(Z direction) OY^gZXi^dc 1. High Operating Temperature ¤%#' DF59’s are rated at temperatures up to 105 ç. MY^gZXi^dc ●DF59 2. Swing Lock Structure (Wire-to-Board) The DF59 features a “swing-lock” mechanism that employs both a positive and friction lock. This helps to prevent accidental unmating by severe wiring and mechanical stress. ¤%#* NY^gZXi^dc ¤%#*bb Fig.1 3. Short-Circuit Pin The Short-Circuit Pin allows the termination of an open circuit. Typically used at the end of a series of connected circuit boards. 4. Multi Function Design Swing-Lock Structure (Board-to-Wire Type) Positive Lock The DF59 has the ability to function as either a Board-toWire or Board-to-Board System. The PCB mounted receptacle is designed to mate with the W-to-B, B-to-B, and Short Circuit Pin connectors. This multi function ability allows versatility while keeping connectors to a minimum. 5. Contact Design Friction Lock The terminal design features two-point contact to ensure a highly reliable connection. 6. Common Applicator Crimping can be performed using the applicator (AP105DF11-22S) for the existing series DF11-22S C F(A), by replacing the die with the one for DF59 series. * For crimping quality standards and crimping conditions, crimping needs to be performed in accordance with the specific conditions of DF59-22PCFA. 2.48mm Fig.2 Short-Circuit Pin 8jggZci8^gXj^i ●Common to DF59/59S/59SN 7. Floating Structure (Board-to-Board) The Board-to-Board connector can be used to connect two PCB together in a co-planar arrangement and features a “Stress free contact” that floats ± 0.5mm in the X, Y and Z dimensions. 8. Space Savings The DF59 series offers high performance in a compact, space saving design; featuring a 2mm pitch and coupled with a mated height of only 2.48mm with AWG#22 cable. The single position floating plugs DF59S and DF59SN are specifically designed to save space, and can be mounted in high density applications. Fig.3 W-to-B structure (DF59M) Clear tactile click and high locking strength achieved by the robust locking mechanism Mating force : 16N min. (in a horizontal direction) 16N min. 9. Robust locking structure on DF59M (W-to-B Connection) The lock mechanism on compact DF59M provides 16N horizontal lock strength. (Fig.4) 10. Standardization of PCB layout The DF59S/SN type is used on board-to-board connections, and the DF59M type is intended for wire-to-board connections. Although they have different receptacles, the PCB mounting pattern can be used for these two types. Different combinations of these connectors can be used in the same system with a common PCB. This allows for standardization of PCB. (Fig.5) (Note) Each stencil mask is necessary Fig.4 Standardization of PCB pattern DF59S/SN type and DF59M type can be used in the same system by using a common PCB. Fig.5 2016.1e 1 DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) Product Specifications Current rating Ratings Voltage rating DF59/S/SN 3A DF59M 6A (22 AWG), 5A (24 AWG) 4A (26 AWG), 3A (28 AWG) DF59/S/SN AC/DC 230V (Note 3) DF59M AC/DC 350V (Note 3) Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Items Operating Temperature : -40 to 105ç (Note 1) Operating Humidity Range : 20 to 80% Storage Temperature Range : -10 to 60ç (Note 2) Storage Humidity Range : 40 to 70% (Note 2) Specifications Conditions 1.Contact resistance DF59-＊P-2FC/SP 50mø min. DF59S/SN DF59M-1S-H 45mø min. DF59-＊P-2C 30mø min. 2.Vibration No electrical discontinuity over 1µs. 3.Shock No electrical discontinuity over 1µs. 4.Humidity ■Contact resistance ■Insulation resistance DF59-＊P-2FC/SP Temperature 40 ± 2ç, humidity 90 to 95%, 50mø min. DF59S/SN left for 96 hours 1000Mø max. DF59M 45mø min. DF59-＊P-2C 30mø min. Under 6V DC, must be measured by 100mA (DC or 1000Hz) Frequency 10 to 55Hz, single amplitude 0.75mm, 3 directions, 10 cycles each 2 Acceleration 490 m/s , 11ms; duration, sine half-wave 3 cycles in each of the 3 axis. ■Contact resistance ■Insulation resistance 5.Temperature cycle DF59-＊P-2FC/SP 50mø min. DF59S/SN DF59M 45mø min. DF59-＊P-2C 30mø min. 1000Mø max. ■Contact resistance 6. Operating Life 7.Resistance to soldering heat (-55ç: 30 min. ➝ 5-35ç: 2 to 3 min. ➝85ç: 30 min. ➝5-35ç: 2 to 3 min.) 5 cycles ■Number of insertion and withdrawal force DF59-＊P-2FC/SP DF59-＊P-2FC/SP 50mø min. DF59S/SN 30 times DF59M 45mø min. 20 times DF59-＊P-2C 30mø min. 10 times 10 times No melting of resin which affect the performance. Reflow : Depends on recommended temperature profile. Hand soldering : Soldering iron temperature 350 ± 10ç, 3 sec. Note 1 : Including temperature rise caused by current flow. Note 2 : The term “storage” refers to products stored for long period of time prior to mounting and use. Operating temperature and humidity range covers connectors after installation, storage, shipment or during transportation. Note 3 : The rated voltage is the applied voltage when connectors are mounted parallel to each other on the PCB with a distance of 1.6mm or more between them. Hirose recommends his mounting distance. This mounting distance is required in order to prevent creepage between the printed wiring to maintain an effective voltage of 300V, according to IEC 60664 and JIS C 60664 standards. Materials / Finish Items DF59 Receptacle DF59S Parts Materials Treatment UL Specification Insulator LCP Natural Gold plated UL94V-0 Contact DF59M DF59 Floating plug DF59S DF59SN Crimp contact DF59M Short pin Crimp case Crimp contact 2 Insulator Contact Insulator Contact Insulator Contact Insulator Contact Insulator Contact Phosphor bronze Copper Alloy PBT Brass LCP Brass LCP Brass Copper Alloy PBT Brass PBT Phosphor bronze Tin plated White Gold plated Natural Tin plated Natural Tin plated White Gold plated White Gold plated --------------UL94V-0 --------------UL94V-0 --------------UL94V-0 --------------UL94V-0 --------------UL94V-0 --------------- DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) Ordering Information Please refer to the ordering information below for each connector type ●Receptacle DF 59 # − * S − * V r q w e q Series Name : DF t y u y Pitch w Series No. : 59 None : Single contact type e None : Standard 2 : Standard 2mm (4mm : Without the central contact) u Termination form S：B-to-B type Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. M：W-to-B type V : SMT straight type (B-to-B type) r Number of contacts : 1, 2, 3, 4 H : SMT right angle type (W-to-B type) t Type of connector S : Receptacle ●Plug DF 59 # − * P − * FC q w e r t y q Series Name : DF u t Type of connector w Series No. : 59 P : Plug e None : Standard y Pitch S：Single contact type 2 : DF59 : 2mm (4mm : Without the central contact) SN：Single contact slim type None : DF59S/SN/M r Number of contacts u Termination form DF59 ：2, 3, 4 DF59S/SN：1 FC : Floating ●Short-Circuit pin DF 59 − * P − 2 SP q w e r t y q Series Name : DF t Pitch : 2mm w Series No. : 59 y Termination form e Number of contacts：2, 3, 4 SP : Short Pin r Type of connector P : Plug ●Crimp Socket DF 59 − * P − 2 C q w e r t y q Series Name : DF t Pitch : 2mm w Series No. : 59 y Termination form e Number of contacts：2, 3, 4 r Type of connector C : Crimp case P : Plug ●Contact（W-to-B） DF 59 M − 2224 PCF q w e r t q Series Name : DF w Series No. : 59 e None : Standard M：Single contact type (W-to-B M=micro) r Applicable Wire t Form Type/Package Type/Plating type PCFA : Plug crimping contact·Reel contact·Gold plating PCA : Plug crimping contact·Bulk contact·Gold plating PCF : Plug crimping contact·Reel contact·Tin plating PC : Plug crimping contact·Bulk contact·Tin plating 22 ：22 AWG 2224：22 to 24 AWG 2628：26 to 28 AWG 3 DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) Straight Receptacle (SMT) '#,* ,#** ,#.* 6 7 KVXjjb VgZV 6 %#, F G 11.5±0.1 22.25 +0.2 1.75±0.1 0 (24) :¤%#%* + 0 0 .1 &#%*¤%#%* &#)¤%#%* 4±0.1 2±0.1 12±0.1 F +#&*¤%#%* %#+*¤%#%* ●Packaging Dimensions 5 ●Recommended PCB Dimensions (t=1.6mm) Ø1 . Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. '#( E2' 8 9 F-F G G-G &#)¤%#%* &#&¤%#%* E2'¤%#%* Unreeling Direction 8¤%#%* [Specification No.] (51) : Gold plating, emboss packaging Unit : mm Part No. HRS No. No. of contacts A B C D E DF59-2S-2V(51) 667-0001-0 51 2 7.2 5.3 2.0 6.0 6.62 DF59-3S-2V(51) 667-0002-3 51 3 9.2 7.3 4.0 8.0 8.62 DF59-4S-2V(51) 667-0003-6 51 4 11.2 9.3 6.0 10.0 10.62 DF59-2S-4V(51) 667-0021-8 51 2* 9.2 7.3 4.0 8.0 8.62 * DF59-2S-4V(51) is made by removing the middle pin of DF59-3S-2V(51) at the factory. Note : Please order in full reel quantities. (2,000 pcs/reel) 2.65 Floating Plug Part No. DF59-2P-2FC(50) DF59-3P-2FC(50) DF59-4P-2FC(50) DF59-2P-4FC(50) HRS No. 667-0006-4 50 667-0007-7 50 667-0008-0 50 667-0020-5 50 No. of contacts 2 3 4 2* B A P=2 17.1 A 7.2 9.2 11.2 9.2 B 2.0 4.0 6.0 4.0 * DF59-2P-4FC(50) is made by removing the middle pin of DF59-3P-2FC(50) at the factory. Note : Please order in full tray quantities. (50 pcs/tray) 4 [Specification No.] (50) : Gold plating, tray packaging Unit : mm Packaged Quantity/Tray 50 DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) Short-Circuit Pin 6 '#)( '#'- 8 E2' [Specification No.] (50) : Gold plated, Tray packaging Unit : mm Part No. HRS No. No. of contacts A B C DF59-2P-2SP(50) 667-0017-0 50 2 7.2 5.9 2.0 DF59-3P-2SP(50) 667-0018-3 50 3 9.2 7.9 4.0 DF59-4P-2SP(50) 667-0046-9 50 4 11.2 9.9 6.0 Packaged Quantity/Tray 100 Note : Please order in full tray quantities. Note : For 4 pos. type contact No.1 and 2, No.3 and 4 are connected respectively. Crimp Socket -#&* 6 7 9 '#)) 8 E2' '#)( '#'- Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. ,#.* 7 [Specification No.] None : 100 pcs/pack Unit : mm Part No. HRS No. No. of contacts A B C D DF59-2P-2C 667-0011-4 00 2 7.2 5.9 5.2 2.0 DF59-3P-2C 667-0012-7 00 3 9.2 7.9 7.2 4.0 DF59-4P-2C 667-0013-0 00 4 11.2 9.9 9.2 6.0 Note : Please order in full pack quantities. (100 pcs/pack) 5 DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) Crimp contact &#*) Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. %#, %#- &#' +#& ( %#-* &#* i2%#' Part No. HRS No. Packaging Quantity DF59-22PCFA 667-0016-8 00 Reel contact (Note 1) 10,000 contacts / reel DF59-22PCA 667-0022-0 00 Bulk contact (Note 2) 100 contacts / pack Treatment Gold plated Note 1 : Please order reel contacts by full reel quantities. (10,000 pcs/reel) Note 2 : Please order loose piece contacts in full pack. (100 pcs/pack) ●Applicable Wire (Tin plated soft copper wire) Conductor Size (Wire Constitution) 22 AWG (17 /Ø0.16mm) Jacket Diameter ●Recommended Wire UL1061, UL3265 UL1061 (Ø1.26mm) ●Strip Length UL3265 (Ø1.38mm) 1.7 to 2.3mm Note : Please contact your nearest Hirose Sales Representative for information regarding compatible wire Remarks: Please consult with our sales representative when using wires other than applicable wire. Note : The strip length is a reference value. Please make adjustments so finished crimps will meet the specified values. Refer to the crimping quality standards (ATAD-H0504) for details. 6 DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) 0.2±0.1 1.7±0.3 1.1±0.2 1±0.15 Contact portion Vacuum area 5.8±0.3 4.3±0.2 1.45±0.15 1.55±0.15 Single Contact Type Straight Receptacle (SMT) 1±0.2 Lock portion 1.1±0.2 1.7±0.3 1±0.2 1.5±0.05 Part No. DF59S-1S-V(21) 3.05±0.05 Lock portion Board edge 1.75±0.1 +0.1 0 Distance between pads:3.0mm Min. Board edge t=0.3±0.05 A-A Contact portion Mount the lock portion side towards the board edge. B B-B Distance between pads:3.0mm Min. A (16) 7.5±0.1 Lock portion +0.2 0 6.2±0.05 Contact portion A 14.25 0.9±0.05 1.5±0.05 4±0.1 Ø1.5 4±0.1 2±0.1 ●Recommended PCB Dimensions (t=1.6mm) 0.9±0.05 B Unreeling Direction HRS No. 667-0024-6 21 [Specification No.] (21) : Tin plating, emboss packaging Note : Please order in full reel quantities. (10,000 pcs/reel) Single Contact Type Floating Plug 21.6±0.3 2.±0.37 Part No. DF59S-1P-FC(21) HRS No. 667-0023-3 21 1.13±0.2 CAV No. HRS logo mark Plug center markings [Specification No.] (21) : Tin plating, emboss packaging Note : Please order in full reel quantities. (10,000 pcs/reel) Single Contact Slim Type Floating Plug 1.7±0.2 Part No. DF59SN-1P-FC(21) HRS No. 667-0028-7 21 1.17±0.2 HRS logo mark Plug center markings G 17.7±0.3 Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. ●Packaging Dimensions CAV No. [Specification No.] (21) : Tin plating, emboss packaging Note : Please order in full reel quantities. (10,000 pcs/reel) Note : Use the special (DF59SN-1P-FC/IN-TOOL) tool for connector insertion. 7 DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) ■Single Contact Type Right Angle Receptacle (SMT) 2.2±0.3 1±0.2 4.4±0.3 1.95±0.2 Vacuum area 4±0.1 4±0.1 2±0.1 A B Part No. Pattern prohibition area (2.6) PCB end side(Conductor) HRS No. DF59M-1S-H(21) 667-0041-5 21 3.3mm MIN (2mm MIN) 1.5±0.05 2.6±0.05 A-A (1) (5.9) (1.3) 4.6±0.05 8±0.1 (0.2) 1.2±0.05 t=0.3±0.05 The size between pattern : 1.6mm MIN (0.2) (5.9) Parallel Arrangement Recommended PCB Layout(５ : １) 1.5±0.05 Connector outline 4.6±0.05 0.6±0.05 3.7±0.05 1.2±0.05 0.9±0.05 Recommended PCB pattern(５ : １) ●Packaging Dimensions 9±0.1 0 14.25+0.2 (16) Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. ●Recommended PCB Dimensions (t=1.6mm) 1.75±0.1 1.2±0.2 2.6±0.3 A B B-B Vacuum area Direction of unreeling [Specification No.] (21) : Tin plating, emboss packaging Note 1 : Please order in full reel quantities. (10,000 pcs/reel) Note 2 : This connector is designed to mate with Crimp contact of DF59M only. (P.8) ■Single Contact Type Crimp Contact HRS No. Recommended Wire DF59M-2224PCF 667-0042-8 00 DF59M-2224PC 667-0044-3 00 UL10368 DF59M-2628PCF 667-0043-0 00 DF59M-2628PC 667-0045-6 00 Applicable Wire Jacket Diameter Conductor Size Wire Constitution 22 AWG 17/Ø0.16mm Ø1.11 to 1.26mm 24 AWG 11/Ø0.16mm 22 AWG 17/Ø0.16mm Ø1.26mm 24 AWG 11/Ø0.16mm Ø1.11mm 7/Ø0.16mm 26 AWG Ø0.88 to 0.98mm 28 AWG 7/Ø0.17mm Ø0.98mm 26 AWG 7/Ø0.16mm Ø0.88mm 28 AWG 7/Ø0.17mm 1.15±0.2 0.5±0.2 2±0.2 5.45±0.3 3±0.2 2.5±0.2 1.25±0.2 P=5.5±0.2 Part No. 0.82±0.2 1±0.2 1.85±0.2 t=0.2±0.05 By Type Quantity Reel contact (Note 1) Bulk contact (Note 2) Reel contact (Note 1) Bulk contact (Note 2) Treatment 10,000/reel 100/pack Tin plated 10,000/reel 100/pack Note 1 : Please order reel contacts by full reel quantities. (10,000 pcs/reel) Note 2 : Please order loose piece contacts in full pack. (100 pcs/pack) Note 3 : Please consult with our sales representative when using wires other than applicable wire. Note 4 : The strip length is a reference value. Please make adjustments so finished crimps will meet the specified values. Refer to the crimping quality standards (ATAD-H0778) for details. 8 DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) Applicable Crimping Tool Types Part No. HRS No. AP105-DF59-22P 901-4619-8 00 AP105-DF59M-2224P 901-4638-2 Applicator Press Unit Hand Tool （W-to-B） CM-105 Remarks DF59-22PCFA DF59M-2224PCF (Note 2) Manufactured by Japan Automatic Machine Co., Ltd. DF59M-2628PCF (Note 2) Manufactured by Japan Automatic Machine Co., Ltd. 901-0005-4 00 DF59-22PCA HT801/DF59-22P 901-4619-8 00 ※UL1061 AWG#22 Only DF59M-2224PC HT801/DF59M-2224P 550-0420-3 ※UL10368 AWG#22、24 Only DF59M-2628PC HT801/DF59M-2628P 550-0421-6 ※UL10368 AWG#26、28 Only DF59-22PCFA 550-0179-2 00 DF-C-PO(B) DF59-22PCA DF-C-PO(A) 550-0170-8 00 DF59M Series Extraction Tool（B-to-B）DF59SN-1P-FC/IN-TOOL 667-0040-2 00 DF59SN-1P-FC Note 1 : Customers are strongly encouraged to utilize HRS application tooling or tooling created by a Hirose tooling partner. Hirose assumes no liability for customers using tooling from non-recognized sources. Note 2 : Please contact Japan Automatic Machine Co., Ltd. (hereinafter J.A.M.) through their website regarding crimping issues when using applicators manufactured by J.A.M. URL http://www.jam-net.co.jp Mating Dimensions ●Board-to-board connection (floating plug) ●Short-circuit pin connection [Standard] (17.1) DF59-*S-2V (0.5) DF59-*S-2V DF59-*P-2SP (7.95) (2.48) (2.8) DF59-*P-2FC DF59-*S-2V [Single contact slim type] Contact portion Lock Contact portion portion ●Wire-to-Board Mated condition (1.7) [Standard] (2.48) DF59-*P-2C (18.6) (17.7) DF59-*S-2V (1.2) DF59SN-1P-FC DF59S-1S-V (0.5) DF59S-1S-V ●Wire-to-Board connection [Single contact type] Lock portion [Single contact type] Contact portion (2.7) Contact portion (21.6) DF59S-1P-FC (1.18) Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Hand Tool − AP105-DF59M-2628P 901-4639-5 DHS887300H-UP − DHS887200H-UP Applicable Contact DF59S-1S-V (0.5) DF59S-1S-V 9 DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) Operating Precautions 1. Recommended Temperature Profile (Lead-free soldering possible) 10sec MAX MAX 250ç 250 220ç Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. TEMPERATURE （ç） 200 180ç 150 100 50 0 TIME （sec） 90 − 120sec PRE-HEATING TIME 60sec MAX SOLDERING TIME [Applicable Conditions] 1. Peak Temperature : MAX 250ç 2. Heated Area : 220ç or above, within 60 sec. 3. Pre-heating Area : 150 to 180ç, 90 to 120 sec. 4. Number of Times : within 2 times *Measured at contact lead area Please be noted that the reflow condition may vary depending on soldering paste type, manufacturer of soldering material, board size, as well as conditions of other mounting materials. (*1) Above temperature profile is our recommended value. 2. Recommended Hand Solder Conditions 3. Recommended Screen Thickness, Open Ratio (Pattern Area Ratio) 10 Soldering iron temperature : 350 ± 10ç, soldering time : within 3 seconds Thickness 0.1mm, Open ratio : 100% 4. Warpage of PC board Maximum of 0.02mm at the connector center, with both ends of the connector as reference points. 5. Cleaning Condition Cleaning with IPA is possible. (Cleaning is not recommended. In case of cleaning, please evaluate if it causes a decrease in the performance which includes mechanical operation and environmental resistance.) 6. Precautions ■ When inserting crimp-type (solderless) terminals to crimping (solderless) sockets, to maintain reliable performance, please do not insert obliquely. ■ DO NOT mate/un-mate a non-terminated plug with a non-mounted receptacles. This may lead to damage or deformation of the contacts. ■ Please note that pulling on the wires or cable during un-mating may cause damage. ■ DO NOT apply flux to the contact terminals when hand soldering the receptacle to the board. Flux can wick into the electrical contact areas and may lead to connection failures. ■ Slight discoloration on the insulating materials will not affect form, fit or function of the connectors. ■ Please refer to the following for the points for proper handling regarding mating/unmating operations. “DF59 Insertion and Removal Manual” “DF59S Insertion and Removal Manual” ATAD-H0651 “DF59SN Insertion and Removal Manual” ATAD-H0719 “DF59M Operation manual” ATAD-H0779 DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. MEMO : 11 Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. DF59 Series●2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) Powered by TCPDF (www.tcpdf.org) USA: HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS 2300 Warrenville Road, Suite 150, Downers Grove, IL 60515 Phone : +1-630-282-6700 http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE 2841 Junction Ave, Suite 200 San Jose, CA. 95134 Phone : +1-408-253-9640 Fax : +1-408-253-9641 http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) 17197 N. Laurel Park Drive, Suite 253, Livonia, MI 48152 Phone : +1-734-542-9963 Fax : +1-734-542-9964 http://www.hirose.com/us/ THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 1101 CC Amsterdam Z-O Phone : +31-20-6557460 Fax : +31-20-6557469 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Herzog-Carl-Strasse 4 D-73760 Ostfildern (Scharnhauser Park) Phone : +49-711-4560-02-1 Fax : +49-711-4560-02-299 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. NUERNBERG OFFICE Neumeyerstrasse 22-26, 90411 Nurnberg Phone : +49-911 32 68 89 63 Fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE Bayernstr. 3, Haus C 30855 Langenhagen, Germany Phone : +49-511 97 82 61 30 Fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ FRANCE: HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE Regus La Garenne Colombes,Place de La Belgique, 71 Boulevard National La Garenne Colombes, 92250, France Phone : +33 (0) 1 7082 3170 Fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ UNITED KINGDOM: HIROSE ELECTRIC EUROPE BV (UK BRANCH) 4 Newton Court, Kelvin Drive, Knowlhill, Milton Keynes, MK5 8NH Phone : +44-1908 202050 Fax : +44-1908 202058 http://www.hirose.com/eu/ CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. 1601, Henderson Metropolitan, NO.300, East Nanjing Road, Huangpu District, Shanghai, China 200001 Phone : +86-21-6391-3355 Fax : +86-21-6391-3335 http://www.hirose.com/cn/ CHINA: HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, 100025 Phone : +86-10-5165-9332 Fax : +86-10-5908-1381 http://www.hirose.com/cn/ CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008 Phone : +86-755-8207-0851 Fax : +86-755-8207-0873 http://www.hirose.com/cn/ HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 1001, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +852-2803-5338 Fax : +852-2591-6560 http://www.hirose.com/hk/ TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 103 8F, No.87, Zhengzhou Rd., Taipei Phone : +886-2-2555-7377 Fax : +886-2-2555-7350 http://www.hirose.com/tw/ KOREA: HIROSE KOREA CO., LTD. 250, Huimanggongwon-ro, Siheung-si, Gyeonggi-do, Korea, 429-849 Phone : +82-31-496-7000,7124 Fax : +82-31-496-7100 http://www.hirose.co.kr/ SINGAPORE: INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD. 10 Anson Road #26-16, International Plaza Office NO.519, Regus-Green Boulevard, Level5, Tower C, Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India 079903, Singapore Phone : +91-12-660-8018 Phone : +65-6324-6113 Fax : +91-120-4804949 Fax : +65-6324-6123 http://www.hirose.com/sg/ http://www.hirose.com/sg/ MALAYSIA: PENANG REPRESENTATIVE OFFICE 1-21-01, Suntech @ Penang Cybercity (1164), Lintang Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. Phone : +604-619-2564 Fax : +604-619-2574 http://www.hirose.com/sg/ ® 12 INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma Gandhi (MG) Road, Bangalore 560 001, Karnataka, India Phone : +91-80-4120 1907 Fax : +91-80-4120 9908 http://www.hirose.com/sg/ THAILAND: BANGKOK OFFICE (REPRESENTATIVE OFFICE) Unit 4703, 47th FL., 1 Empire Tower, South Sathorn Road, Yannawa, Sathorn, Bangkok 10120 Thailand Phone : +66-2-686-1255 Fax : +66-2-686-3433 http://www.hirose.com/sg/ 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 01/2016. Contents are subject to change without notice for the purpose of improvements.