Omron G3NA-490B-UTU Solid state relay Datasheet

Solid State Relay
G3NA
New Models with 75-A and 90-A Output
Join the Previous Models with 5- to 50-A
Output.
• AC Output Relays with 75-A and 90-A output added.
• All models feature a uniform mounting pitch.
• Built-in varistor effectively absorbs external surges.
• Operation indicator enables monitoring operation.
• Protective cover for greater safety.
• Standard models certified by UL and CSA and -UTU models by VDE (TÜV).
Ordering Information
To Order: Select the part number and add the desired rated input voltage, (e.g., G3NA-240B-100 to 120 VAC)
.
Isolation
Phototriac
Zero cross
function
Yes
Photocoupler
Indicator
Yes
Rated output load
(applicable output load)
5 A at 24 to 240 VAC*
(19 to 264 VAC)
Rated input voltage
5 to 24 VDC
Model
G3NA-205B
100 to 120 VAC
200 to 240 VAC
Phototriac
Photocoupler
10 A at 24 to 240 VAC*
(19 to 264 VAC)
5 to 24 VDC
G3NA-210B
100 to 120 VAC
200 to 240 VAC
Phototriac
Photocoupler
20 A at 24 to 240 VAC*
(19 to 264 VAC)
5 to 24 VDC
G3NA-220B
100 to 120 VAC
200 to 240 VAC
25 A at 24 to 240 VAC*
(19 to 264 VAC)
5 to 24 VDC
G3NA-225B
100 to 120 VAC
200 to 240 VAC
25 A at 200 to 480 VAC*
(180 to 528 VAC)
5 to 24 VDC
G3NA-425B
100 to 240 VAC
(Table continued on next page.)
Solid State Relay
G3NA
451
Isolation
Phototriac
Zero cross
function
Yes
Indicator
Yes
Rated output load
(applicable output load)
40 A at 24 to 240 VAC*
(19 to 264 VAC)
Photocoupler
Rated input voltage
5 to 24 VDC
Model
G3NA-240B
100 to 120 VAC
200 to 240 VAC
Phototriac
Photocoupler
Phototriac
Photocoupler
—
Yes
75 A at 24 to 240 VAC*
(19 to 264 VAC)
5 to 24 VDC
100 to 240 VAC
90 A at 24 to 240 VAC*
(19 to 264 VAC)
100 to 240 VAC
5 to 24 VDC
G3NA-275B-UTU
G3NA-290B-UTU
10 A at 5 to 200 VDC*
(4 to 220 VDC)
5 to 24 VDC
G3NA-D210B
10 A at 200 to 480 VAC*
(180 to 528 VAC)
5 to 24 VDC
20 A at 200 to 480 VAC*
(180 to 528 VAC)
5 to 24 VDC
40 A at 200 to 480 VAC*
(180 to 528 VAC)
5 to 24 VDC
50 A at 200 to 480 VAC
(180 to 528 VAC)
5 to 24 VDC
G3NA-450B
75 A at 200 to 480 VAC
(180 to 528 VAC)
5 to 24 VDC
G3NA-475B-UTU
90 A at 200 to 480 VAC
(180 to 528 VAC)
5 to 24 VDC
100 to 240 VAC
G3NA-410B
100 to 240 VAC
G3NA-420B
100 to 240 VAC
G3NA-440B
100 to 240 VAC
100 to 240 VAC
G3NA-490B-UTU
100 to 240 VAC
*Loss time increases under 75 VAC.
Note: 1. When ordering a TÜV-approved model, add “-UTU” to the model number as shown below:
Example: G3NA-210B-UTU.
2. G3NA-4 are not CE marked.
3. G3NA-2 with “-UTU” are CE marked.
■ Accessories
Heat Sinks
Types
Standard mount
Track mount
Applicable solid-state relays
Model
G3NA-205B, G3NA-210B, G3NA-D210B, G3NA-220B, G3NA-410B, G3NA-420B
Y92B-A100
G3NA-225B, G3NA-240B, G3NA-425B, G3NA-440B
Y92B-A150N
G3NA-440B
Y92B-A250
G3NA-205B, G3NA-210B, G3NA-D210B, G3NA-410B
Y92B-N50
G3NA-220B, G3NA-420B
Y92B-N100
G3NA-225B, G3NA-240B, G3NA-425B, G3NA-440B
Y92B-N150
G3NA-450B
Y92B-P250
G3NA-275B-UTU, G3NA-290B-UTU, G3NA-475B-UTU, G3NA-490B-UTU
Y92B-P250NF
Mounting Track and Accessories
Description
Mounting bracket for G3NA-240B. Changes pitch to 56 mm (2.21 in.) from 47.5 mm (1.73 in.),
the same pitch as G3N-240B.
Model
R99-11
DIN Rail Track, 50 cm (1.64 feet) length; use with Y92B-N❏❏❏ heat sinks
PFP-50N
DIN Rail Track, 1 m (3.28 feet) length; use with Y92B-N❏❏❏ heat sinks
PFP-100N
Spacer
PFP-S
End cap
PFP-M
One-touch mounting plate
R99-12 FOR G3NA
452
Solid State Relay
G3NA
Specifications
■ Input Ratings
(Ambient temperature: 25°C [77°F])
Type
G3NA-2❏❏B
Rated
voltage
Operating
voltage range
Impedance
(See note 1)
Voltage level
Must operate voltage
Must release voltage
4 VDC max.
1 VDC min.
36 kΩ ±20%
75 VAC max. (see note 3)
20 VAC min. (see note 3)
72 kΩ ±20%
150 VAC max. (see note 3)
40 VAC min. (see note 3)
5 mA max. (see note 2)
4 VDC max.
1 VDC min.
5 to 24 VDC
4 to 32 VDC
7 mA max. (see note 2)
100 to 120 VAC
75 to 132 VAC
200 to 240 VAC
150 to 264 VAC
G3NA-4❏❏B
5 to 24 VDC
4 to 32 VDC
G3NA-D210B
100 to 240 VAC
75 to 264 VAC
72 kΩ ±20%
75 VAC max.
20 VAC min.
G3NA-275B-UTU 5 to 24 VDC
G3NA-290B-UTU
4 to 32 VDC
15 mA max. (see note 2)
4 VDC max.
1 VDC min.
G3NA-475B-UTU 100 to 240 VAC
G3NA-490B-UTU
75 to 264 VAC
72 kΩ ±20%
75 VAC max.
20 VAC min.
Note: 1. The input impedance is measured at the maximum value of the rated supply voltage (for example, with the model rated at 100 to 120 VAC,
the input impedance is measured at 120 VAC).
2. With constant current input circuit system, the impedance for the G3NA-2❏❏B-UTU is 15mA max.
3. Refer to the “Characteristic Data” for further details.
■ Output Ratings
Type
Applicable load
Rated
load voltage
Load
voltage range
Load current
With heat sink*
Surge current
Without heat sink
G3NA-205B
24 to 240 VAC
19 to 264 VAC
0.1 to 5 A (at 40°C)
0.1 to 3 A (at 40°C)
60 A (60 Hz, 1 cycle)
G3NA-210B
24 to 240 VAC
19 to 264 VAC
0.1 to 10 A (at 40°C)
0.1 to 4 A (at 40°C)
150 A (60 Hz, 1 cycle)
G3NA-410B
200 to 480 VAC
180 to 528 VAC
0.2 to 10 A (at 40°C)
0.2 to 4 A (at 40°C)
G3NA-220B
24 to 240 VAC
19 to 264 VAC
0.1 to 20 A (at 40°C)
0.1 to 4 A (at 40°C)
G3NA-420B
200 to 480 VAC
180 to 528 VAC
0.2 to 20 A (at 40°C)
0.2 to 4 A (at 40°C)
220 A (60 Hz, 1 cycle)
G3NA-240B
24 to 240 VAC
19 to 264 VAC
0.1 to 40 A (at 40°C)
0.1 to 6 A (at 40°C)
G3NA-440B
200 to 480 VAC
180 to 528 VAC
0.2 to 40 A (at 40°C)
0.2 to 6 A (at 40°C)
440 A (60 Hz, 1 cycle)
G3NA-450B
200 to 480 VAC
180 to 528 VAC
0.2 to 50 A (at 40°C)
0.2 to 6 A (at 40°C)
G3NA-D210B
5 to 200 VDC
4 to 220 VDC
0.1 to 10 A (at 40°C)
0.1 to 4 A (at 40°C)
G3NA-275B-UTU 24 to 240 VAC
19 to 264 VAC
1 to 75 A (at 40°C)
1 to 7 A (at 40°C)
800 A (60 Hz, 1 cycle)
G3NA-475B-UTU 200 to 480 VAC
180 to 528 VAC
1 to 75 A (at 40°C)
1 to 7 A (at 40°C)
800 A (60 Hz, 1 cycle)
G3NA-290B-UTU 24 to 240 VAC
19 to 264 VAC
1 to 90 A (at 40°C)
1 to 7 A (at 40°C)
1,000 A (60 Hz, 1 cycle)
G3NA-490B-UTU 200 to 480 VAC
180 to 528 VAC
1 to 90 A (at 40°C)
1 to 7 A (at 40°C)
1,000 A (60 Hz, 1 cycle)
20 A (10 ms)
*When the appropriate size OMRON heat sink is used.
Solid State Relay
G3NA
453
■ Characteristics
Type
Operate time
G3NA-205B, G3NA-240B
-210B, -220B,
-225B
G3NA-410B,
-420B, -425B,
-440B, -450B
G3NAD210B
G3NA290BUTU
G3NA475BUTU
G3NA490BUTU
DC input
1/2 of load power source cycle + 1 ms max.
AC input
1 1/2 of load power source cycle + 1 ms max. 30 ms max.
DC input
1/2 of load power source cycle + 1 ms max.
AC input
1 1/2 of load power source cycle + 1 ms max. 30 ms max.
3/2 of load power source cycle + 1 ms max.
Output ON voltage drop
1.6 V (RMS)
max.
Leakage current
Release time
Insulation resistance
1/2 of load power source cycle + 1 ms max.
1.8 V (RMS
max.)
1.5 V max.
1.6 V (RMS) max.
1.8 V (RMS) max.
5 mA max. at 100 VAC
10 mA max.
at 200 VAC
5 mA max.
at 200 VDC
5 mA max. at 100
VAC
10 mA max. at 200
VDC
10 mA max. at 200 VAC
20 mA max. at 400 VAC
10 mA max. at 200
VAC
20 mA max. at 400
VAC
2,500 VAC, 50/60 Hz for 1 minute
Malfunction
Malfunction
1,000 m/s2 (approx. 100G)
Ambient temperature
Operating
-30° to 80°C (-22° to 176°F) with no icing
Storage
-30° to 100°C (-22° to 212°F) with no icing
Humidity
45% to 85% RH
Weight
Approx. 60 g
(2.1 oz.)
Note: Data shown are of initial value.
Solid State Relay
4,000 VAC, 50/60 Hz for 1 min.
10 to 55 Hz, 1.5 mm double amplitude
Shock
454
5 ms max.
1/2 of load power source cycle + 1 ms max.
3/2 of load power source cycle + 1 ms max.
100 MΩ min at 500 VDC
Dielectric strength
Vibration
1.6 V (RMS)
max.
1 ms max.
G3NA275BUTU
G3NA
Approx. 70 g Approx. 80 g
(2.5 oz.)
(2.8 oz.)
Approx. 70 g
(2.5 oz.)
Approx. 120 g (4.2 oz.)
Engineering Data
Load Current vs. Ambient Temperature
G3NA-205B
G3NA-210B/410B
G3NA-220B/420B
With standard heat sink
(Y92B-A100 or Y92BN50) or aluminum plate
measuring 75 mm x
75 mm x t3.2 mm
(W x H x t)
Without heat sink
Load current (A)
Load current (A)
Load current (A)
20
16
10
With standard heat sink
(Y92B-A100 or Y92BN50) or aluminum plate
8 measuring 150 mm x
150 mm x t3.2 mm
(W x H x t)
6
5 With iron plate measuring
100 x 100 x t0.8 (W x H x t)
4
Without heat sink
With standard heat sink
(Y92B-A100 or Y92BN100) or aluminum plate
measuring 200 mm x
200 mm x t3.2 mm
(W x H x t)
With iron plate measuring
100 x 100 x t0.8 (W x H x t)
2
Without heat sink
0
G3NA-240B
G3NA-440B
Load current (A)
20
With iron plate measuring
12 100 x 100 x t0.8 (W x H x t)
10
Without heat sink
6
4
2
0
−30−20 0
20
40
60
80
30
With standard heat
sink (Y92B-A150N
or Y92B-N150)
20
With iron plate measuring
12 100 x 100 x t0.8 (W x H x t)
10
Without heat sink
6
4
2
0
−30−20 0
20
40
60
100
Ambient temperature (°C)
G3NA-290B-UTU
G3NA-490B-UTU
80
75
70
100
30
20 With iron plate measuring
100 x 100 x t0.8 (W x H x t)
12
10
7
Without heat sink
4A
20
−30−20
0
20
40
60 70 80 100
Ambient temperature (°C)
80
Load current (A)
Using the Y92B-P250NF
40
30
20
10
6
80
Without heat sink
0
−30 −20
100
0
20
40
60
80
100
Ambient temperature (°C)
G3NA-D210B
20
90
0.6°C/W with
Heat Sink
50
With standard heat sink
(Y92B-P250)
Ambient temperature (°C)
G3NA-275B-UTU
G3NA-475B-UTU
60
50
0.3°C/W with
Heat Sink
70
60
50
Using the Y92B-P250NF
40
35
30
10
Load current (A)
Load current (A)
With standard heat
sink (Y92B-A150N or
Y92B-N150)
Load current (A)
40
40
Load current (A)
With Y92B-A250
or heat sink with a
radiation efficiency
of 1°C/W.
45
45
40
G3NA-450B
60
50
50
30
Ambient temperature (°C)
Ambient temperature (°C)
Ambient temperature (°C)
With standard heat sink
(Y92B-A100 or Y92B-N50)
or aluminum plate measuring
150 mm x 150 mm x t3.2 mm
(W x H x t)
6
5 With iron plate measuring
100 x 100 x t0.8 (W x H x t)
4
Without heat sink
With iron plate measuring
20 100 x 100 x t0.8 (W x H x t)
12
7
4A
Without heat sink
20
−30 −20
0
20
40
60 70 80 100
Ambient temperature (°C)
2
0
−30 −20
0
20
40
60
80
100
Ambient temperature (°C)
Note: The ambient operating temperature of the Y92B-P250NF is
−30 to 70°C. Be sure the operating temperature is within this
range.
Solid State Relay
G3NA
455
One Cycle Surge Current
The values shown by the solid line are for non-repetitive inrush currents.
Keep the inrush current below the values shown by the dotted line if it occurs repetitively.
40
150
100
20
0
10
30 50 100 200
500
1,000
0
5,000
10
30 50
100 200
500 1,000
400
300
100
200
50
100
0
5,000
30 50
100 200
500
1,000
5,000
10
30 50
100 200
500
1,000
5,000
Energized time (ms)
G3NA-290B-UTU
G3NA-490B-UTU
Inrush current (A peak)
30
28
0
10
Energized time (ms)
G3NA-275B-UTU
G3NA-475B-UTU
Inrush current (A peak)
Inrush current (A peak)
150
Energized time (ms)
G3NA-D210B
900
800
700
600
500
400
300
1,200
1,000
800
600
400
200
200
100
0
10 20 30 50 70 100 200 300 500
0
10
1,000 2,000
30
50
100
Energized time (ms)
Temperature
Characteristics (for
Must Operate Voltage
and Must Release
Voltage)
1,000
Heat sink area (cm2)
0
3,000
2,000 Ambient
temperature 80°C
−20
300
200
Aluminum plate
3.2 mm thick
30
20
−40
20
40
60
80
50
100
300
1,000
Energized time (ms)
Ambient
temperature 40°C
1,000
700
500
100
70
50
0
30
G3NA-220B
20
−20
10
Heat Sink Area vs.
Load Current
40
−30
300
Energized time (ms)
G3NA-2❏❏B AC input
Variation rate (%)
200
50
Energized time (ms)
26
24
22
20
18
16
14
12
10
8
6
4
2
0
G3NA-240B
G3NA-440B/-450B
Inrush current (A peak)
Inrush current (A peak)
Inrush current (A peak)
60
G3NA-220B
G3NA-420B
Inrush current (A peak)
G3NA-210B
G3NA-410B
G3NA-205B
100
Ambient temperature (°C)
0
2
4
6
8 10 12 14 16 18 20 22 24
Load current (A)
Thermal Resistance Rth
(Back of Junction SSR) (Examples)
Model
Note: The heat sink area refers to the combined area
of the sides of the heat sink that radiate heat.
For example, when a current of 18 A is allowed
to flow through the SSR at 40°C, the graph
shows that the heat sink area is about 450 cm2.
Therefore, if the heat sink is square, one side of
the heat sink must be 15 cm ( 450 (cm2)/2 ) or
longer.
Thermal Resistance Rth of Heat Sinks
(Examples)
Rth (°C/W)
Model
Rth (°C/W)
G3NA-205B
3.22
Y92B-N50
2.8
G3NA-210B
2.62
Y92B-N100
1.63
G3NA-220B
1.99
Y92B-N150
1.38
G3NA-240B
0.45
Y92B-A100
1.63
G3NA-275B-UTU
G3NA-475B-UTU
G3NA-290B-UTU
G3NA-490B-UTU
0.45
Y92B-A150N
1.37
Y92B-A250
1.00
Y92B-P250NF
0.46
G3NA-D210B
2.62
456
Solid State Relay
G3NA
Note: When using a commercially available heat sink, use one with a
thermal resistance equal to or less that the OMRON Heat Sink.
Dimensions
■ Relays
Note: All units are in millimeters unless otherwise indicated.
G3NA-205B, G3NA-210B, G3NA-220B, G3NA-410B, G3NA-420B
11.9
Four, M4 x 8
4.5 dia. screws
Mounting Holes
Two, 4.3-dia.
or M4 holes
Terminal Arrangement/
Internal Connections
(Top View)
Load
Load
power
supply
58 max. 47.5 44
Output
1
2
(−)
4
(+)
3
47.6±0.2
4.5
25
43 max.
Operating
indicator
13.8
25 max.
27 max.
Input
G3NA-240B, G3NA-440B
11.9
4.5 dia. Two, M5 x 12 screws
Mounting Holes
Two, 4.3-dia.
or M4 holes
Terminal Arrangement/
Internal Connections
(Top View)
Load
Load
power
supply
58 min. 47.5 44
Output
47.6±0.2
Operating
indicator
4.5
25
Two,
M4x8
43 max.
13.8
25 max.
27 max.
1
2
(−)
4
(+)
3
Input
G3NA-D210B
Note: The load can be connected to either the positive or negative side.
11.9
Four, M4 x 8
4.5 dia. screws
Mounting Holes
Terminal Arrangement/
Internal Connections
(Top View)
Two, 4.3-dia.
or M4 holes
Load
58 max. 47.5 44
Load
power
supply
Output
1
−
47.6±0.2
Operating
indicator
4.5
25
43 max.
2
+
(−)
4
13.8
25 max.
27 max.
(+)
3
Input
Note: When connecting the load, either the
positive or negative side of the load
terminals can be connected.
G3NA-275B-UTU, G3NA-475B-UTU, G3NA-290B-UTU, G3NA-490B-UTU
4.5 dia.
12
Two, M5 x 12
screws
Mounting Holes
Two, 4.3-dia.
or M4 holes
Terminal Arrangement/
Internal Connections
(Top View)
Load
58 max.47.5 44
Output
4.5
8.2
25
43 max.
Operating
indicator
Two, M4 x
8 screws
47.6±0.2
1
2
16.8
26 max.
28 max.
(−)
4
Solid State Relay
Input
Load
power
supply
(+)
3
G3NA
457
■ Options (Order Separately)
To mount the Relay to DIN
Track, first mount it to the
One-touch Mounting Plate
and then attach it to the DIN
Track as shown in the
diagram.
One-touch Mounting Plate
The One-touch Mounting Plate is used to mount the GN3A to a DIN
Track.
R99-12 FOR G3NA (for the G3NA and G3NE)
Two, M4 mounting
holes for the G3NA
To remove the Relay from
the DIN Track, pull down on
the tab with a screwdriver in
the direction of the arrow.
30
44
Two, M4 mounting
holes for the G3NE
• When a Relay is mounted to DIN Track, use it within the rating for a
Relay without a heat sink.
• Use the following DIN Tracks: PFP-100N or PFP-100N2.
Mounting Bracket
R99-11 (for the G3NA-240B, G3NA-440B)
Use Mounting Bracket R99-11 so that the G3NA-240B/-440B can be
mounted with the same pitch as that of the G3N-240B.
16
8
5
12.5
56
21
4
4.6
Heat Sinks
Y92B-N50 Heat Sink (for the G3NA-205B, G3NA-210B, G3NA-D210B, G3NA-410B, G3NE-210T(L))
For surface mounting, a 30% derating of the load current is required (from the Load Current vs. Ambient Temperature graphs).
The orientation indicated by the external dimensions is not the correct mounting orientation. When opening mounting holes, refer to the
mounting hole dimensions.
Mounting Holes
4.6 dia.
Two, 4.4-dia.
or M4 holes
Two, M3 holes
Two, 3.2-dia. holes
Two, M4 holes
44 max. 30
35 30.5±0.3
47.6
77 max.
90±0.3
100 max.
5.6
5
47 max.
6
4.5
90±0.4
51 max.
35±0.2
Weight: approx. 200 g
458
Solid State Relay
G3NA
Y92B-N100 Heat Sink (for the G3NA-220B, G3NA-420B, G3NE-220T(L))
For surface mounting, a 30% derating of the load current is required (from the Load Current vs. Ambient Temperature graphs).
The orientation indicated by the external dimensions is not the correct mounting orientation. When opening mounting holes, refer to the
mounting hole dimensions.
Mounting Holes
Two, M4
4.6 dia.
Two, M3 holes
Two, 3.2-dia. holes
holes
Two, 4.4-dia.
or M4 holes
71 max. 30
35 30.5±0.3
75 max.
90±0.4
47.6
77 max.
90±0.3
5.6
28
13
5
100 max.
4.5
100 max.
35±0.2
Weight: approx. 400 g
Y92B-N150 Heat Sink (for the G3NA-240B, G3NA-440B)
For surface mounting, a 30% derating of the load current is required (from the Load Current vs. Ambient Temperature graphs).
The orientation indicated by the external dimensions is not the correct mounting orientation. When opening mounting holes, refer to the
mounting hole dimensions.
Mounting Holes
Two, 3.2-dia. holes
47.6
Two, 4.4-dia.
or M4 holes
Three,
M4 holes
4.6 dia.
35
100 max. 30
56±0.3
77 max.
90±0.3
100 max.
104 max.
28
5.6
5
100 max.
13
4.5
Weight: approx. 560 g
Y92B-P250NF Heat Sink (for the G3NA-275B-UTU, G3NA-475B-UTU, G3NA-290B-UTU, G3NA-490B-UTU)
The orientation indicated by the external dimensions is not the correct mounting orientation. When opening mounting holes, refer to the
mounting hole dimensions.
Observe the precautions given in Mounting Method under Precautions for Correct Use.
Mounting Holes
Fan power supply, 200 VAC 50/60 Hz
172 max.
160 max.
120
130±0.3
M4
80 max. 64
64±0.3
133.4
120 max.
105
110max.
Two, 4.6-dia. holes
47.6
Two, M4 holes Thermostat
NC contact, 90∞C
Two, 4.5-dia. or
M4 holes
Weight: approx. 560 g
Solid State Relay
G3NA
459
Y92B-P250
Four, M4
Mounting Holes
Four, 4.5 dia. or M4
190.5 max.
Four, R2.5
130.5 max.
70 max.
Y92B-A100 Heat Sink
(for the G3NA-205B,
G3NA-210B, G3NA220B, G3NA-410B,
G3NA-420B, G3NAD210B)
Y92B-A150N Heat Sink
(for the G3NA-240B,
G3NA-440B)
90±0.1
90±0.1
R2.2
47.6
90±0.1
Three, M4 holes
Three, M4 holes
Two, M4 holes
Y92B-A250 Heat Sink
(for the G3NA-440B)
R2.2
80.5 max.
1.5
47.6
102 max.
9.6
2
47.6
50±0.1
100 max.
50±0.1
56±0.5
150 max.
Weight: approx. 210 g
Weight: approx. 310 g
50±0.1
56±0.5
250 max.
30
45.5 max.
1.5
Weight: approx. 510 g
Mounting Holes
Y92B-A100
Y92B-A150
Y92B-A250
Four, 4.3-dia. or M4 holes
For surface mounting, a 30% derating of the load current is required (from the Load Current vs. Ambient Temperature graphs).
The orientation indicated by the external dimensions is not the correct mounting orientation. When opening mounting holes, refer to the
mounting hole dimensions.
460
Solid State Relay
G3NA
■ Approvals
UL Recognized (File No. E64562) / CSA Certified (File No. LR35535) - - Ambient Temp. = 40°C
SSR type
Input voltage
Load type
Contact ratings
Without heat sink
G3NA-205B
G3NA-210B
5 to 24 VDC
100 to 120 VAC
200 to 240 VAC
General use/Tungsten
3 A, 240 VAC
With heat sink (see note 1)
5 A, 240 VAC
Motor
2.5 FLA, 15 LRA, 240 VAC
2.5 FLA, 15 LRA, 240 VAC
General use/Tungsten
4 A, 240 VAC
10 A, 240 VAC
Motor
2.5 FLA, 15 LRA, 240 VAC
5 FLA, 30 LRA, 240 VAC
G3NA-220B
General use/Tungsten
4 A, 240 VAC
20 A, 240 VAC
Motor
2.5 FLA, 15 LRA, 240 VAC
10 FLA, 60 LRA, 240 VAC
G3NA-225B
General use/Tungsten
4 A, 240 VAC
25 A, 240 VAC
Motor
2.5 FLA, 15 LRA, 240 VAC
12 FLA, 72 LRA, 240 VAC
G3NA-240B
General use/Tungsten
6 A, 240 VAC
40 A, 240 VAC
20 FLA, 120 LRA, 240 VAC
Motor
5 FLA, 30 LRA, 240 VAC
General use/Tungsten
4 A, 480 VAC
10 A, 480 VAC
Motor
2.5 FLA, 15 LRA, 480 VAC
5 FLA, 30 LRA, 480 VAC
General use/Tungsten
4 A, 480 VAC
20 A, 480 VAC
Motor
2.5 FLA, 15 LRA, 480 VAC
10 FLA, 60 LRA, 480 VAC
G3NA-425B
General use/Tungsten
4 A, 480 VAC
25 A, 480 VAC
Motor
2.5 FLA, 15 LRA, 480 VAC
12 FLA, 72 LRA, 480 VAC
G3NA-440B
General use/Tungsten
6 A, 480 VAC
40 A, 480 VAC
Motor
5 FLA, 30 LRA, 480 VAC
20 FLA, 120 LRA, 480 VAC
G3NA-450B
General use/Tungsten
6 A, 480 VAC
50 A, 480 VAC
Motor
5 FLA, 30 LRA, 480 VAC
24 FLA, 144 LRA, 480 VAC
G3NA-D210B
General use
4 A, 200 VDC
10 A, 200 VDC
G3NA-410B
G3NA-420B
5 to 24 VDC
100 to 240 VAC
Note: 1. When used with the proper OMRON heat sink part number or an appropriately dimensioned equivalent.
2. The rated values approved by each of the safety standards (e.g., UL, CSA, and TÜV) may be different from the performance
characteristics individually defined in this catalog.
3. In the interest of product improvement, specifications are subject to change.
Solid State Relay
G3NA
461
Safety Precautions
! Caution
Touching the charged section may occasionally cause
minor electric shock. Do not touch the G3NA terminal section (the charged section) when the power supply is ON.
Be sure to attach the cover before use.
! Caution
The G3NA and heat sink will be hot and may occasionally
cause minor burns. Do not touch the G3NA or the heat
sink either while the power supply is ON, or immediately
after the power is turned OFF.
3. Wire the G3NA and tighten screws correctly, observing the following precautions
Heat generated by a terminal error may occasionally result in fire
damage. Do not operate if the screws on the output terminal are
loose.
• Abnormal heat generated by wires may occasionally result in
fire damage. Use wires suitable for the load current.
• Abnormal heat generated by terminals may occasionally result
in fire damage. Do not operate if the screws on the output terminal are loose.
Tightening Torque
! Caution
The internal snubber circuit is charged and may occasionally cause minor electric shock. Do not touch the G3NA’s
main circuit terminals immediately after the power is
turned OFF.
! Caution
Be sure to conduct wiring with the power supply turned
OFF, and always attach the terminal cover after completing wiring. Touching the terminals when they are charged
may occasionally result in minor electric shock.
Screw size
Tightening torque
M4
1.2 N•m
M5
2.0 N•m
• Abnormal heat generated by terminals may occasionally result
in fire damage. When tightening terminal screws, be sure that
no non-conductive foreign matter is caught in screw.
• For GN3A Relays of 40 A or higher, use crimp terminals of an
appropriate size for the wire diameter for M5 terminals.
• Do not use any wires with damaged sheaths. These may cause
electric shock or leakage.
! Caution
Do not apply a short-circuit to the load side of the G3NA.
The G3NA may rupture. To protect against short-circuit
accidents, install a protective device, such as a quickburning fuse, on the power supply line.
■ Precautions for Safe Use
Although OMRON continuously strives to improve the quality and
reliability of our relays, the G3NA contains semiconductors, which
are generally prone to occasional malfunction and failure.
Maintaining safety is particularly difficult if a relay is used outside of
its ratings. Always use the G3NA within the rated values. When using
the G3NA, always design the system to ensure safety and prevent
human accidents, fires, and social damage even in the event of
G3NA failure, including system redundancy, measures to prevent
fires from spreading, and designs to prevent malfunction.
• Do not place wiring in the same conduit or duct as high-voltage
lines. Induction may cause malfunction or damage.
• Use wires of an appropriate length, otherwise malfunction and
damage may result due to induction.
• Mount the DIN Track securely. Otherwise, the DIN Track may
fall.
• Be sure that the G3NA clicks into place when mounting it to DIN
Track. The G3NA may fall if it is not mounted correctly.
• Do not mount the G3NA when your hands are oily or dirty, e.g.,
with metal powder. These may cause G3NA failure.
• Tighten the G3NA screws securely. Tightening torque: 0.78 to
0.98 N•m
• Tighten the heat sink screws securely. Tightening torque: 0.98
to 1.47 N•m
• Mount the G3NA in the specified orientation. If the G3NA is
mounted in any other orientation, abnormal heat generation
may cause output elements to short or may cause burning.
4. Preventing Overheating
When using the High-capacity Heat Sink (Y92B-P250NF), always
use a thermostat or other method to protect from overheating in
the event that the fan stops.
5. Do Not Touch Fan Blades
When the fan is operating, do not touch the fan blades with any
part of your body or allow foreign matter to come into contact with
the blades. Always attach the enclosed finger guard when using
the G3NA.
6. Operating Conditions
• Only use the G3NA with loads that are within the rated values.
Using the G3NA with loads outside the rated values may result
in malfunction, damage, or burning.
• Do not use the G3NA if the heat sink fins are bent, e.g., as the
result of dropping the G3NA. Heat dissipation characteristics will
be reduced, possibly causing G3NA failure.
• Use a power supply within the rated frequency range. Using a
power supply outside the rated frequency range may result in
malfunction, damage, or burning.
• Apply a thin layer of Toshiba Silicone’s YG6260 or Sinetsu Silicone’s G746, or a similar product to the heat sink before mounting.
7. Do not transport the G3NA under the following conditions. Failure
or malfunction may occur.
• Conditions under which the G3NA will be exposed to water
1. G3NA malfunction or fire damage may occasionally occur. Do not
apply excessive voltage or current to the G3NA terminals.
2. Heat Dissipation
• Do not obstruct the airflow to the G3NA or heat sink. Doing so
may cause the output element to short, or cause fire damage.
• Be sure to prevent the ambient temperature from rising due to
the heat radiation of the G3NA. If the G3NA is mounted inside a
panel, install a fan so that the interior of the panel is fully ventilated.
• If a material with high thermal resistance, such as wood, is
used, heat generated by the G3NA may occasionally cause fire
or burning. When installing the G3NA directly into a control
panel so that the panel can be used as a heat sink, use a panel
material with low thermal resistance, such as aluminum or steel.
• Use the specified heat sink or one with equivalent or better characteristics.
462
Solid State Relay
G3NA
• High temperatures or high humidity
• Without proper packing
!WARNING
Minor Humon hazard by electric shock may occasionally occur.
Heatsink must be connected to ground in the end product.
Operating and Storage Locations
Relationship between SSRs and Duct Height
Do not use or store the G3NA in the following locations. Doing so
may result in damage, malfunction, or deterioration of performance
characteristics.
Incorrect Example
Duct
Mounting surface
Mounting surface
Vertical
direction
Airflow
Base
Duct
Duct
Do not surround the SSR
with ducts, otherwise the
heat radiation of the SSR
will be adversely affected.
Countermeasure 2
50 mm max.
(A height of no
more than half
the SSR's height
is recommended.)
Duct
Mounting surface
• Do not use or store in locations subject to direct sunlight.
• Do not use in locations subject to ambient temperatures outside
the range –20 to 60°C.
• Do not use in locations subject to relative humidity outside the
range 45% to 85% or locations subject to condensation as the
result of severe changes in temperature.
• Do not store in locations subject to ambient temperatures outside
the range –30 to 70°C.
• Do not use or store in locations subject to corrosive or flammable
gases.
• Do not use or store in locations subject to dust (especially iron
dust) or salts.
• Do not use or store in locations subject to shock or vibration.
• Do not use or store in locations subject to exposure to water, oil, or
chemicals.
• Do not use or store in locations subject to high temperatures or
high humidity.
• Do not use or store in locations subject to salt damage.
• Do not use or store in locations subject to rain or water drops.
Countermeasure 1
Duct
Use short ducts.
If the ducts cannot be
shortened, place the SSR on
a metal base so that it is not
surrounded by the ducts.
Ventilation Outside the Control Panel
Be aware of airflow
Duct
Ventilation
outlet
(axial fan)
■ Precautions for Correct Use
Please observe the following precautions to prevent failure to operate, malfunction, or undesirable effect on product performance.
Before Actual Operation
1. The G3NA in operation may cause an unexpected accident.
Therefore it is necessary to test the G3NA under the variety of
conditions that are possible. As for the characteristics of the
G3NA, it is necessary to consider differences in characteristics
between individual SSRs.
2. Unless otherwise specified, the ratings in this catalog are tested
values in a temperature range between 15°C and 30°C, a relative
humidity range between 25% and 85%, and an atmospheric pressure range between 88 and 106 kPa (standard test conditions
according to JIS C5442). It will be necessary to provide the above
conditions as well as the load conditions if the user wants to confirm the ratings of specific G3NAs.
Mounting Method
SSR Mounting Pitch (Panel Mounting)
Duct
Air inlet
If the air inlet or air outlet has a filter, clean the filter regularly to prevent it from clogging to ensure an efficient flow of air.
Do not locate any objects around the air inlet or air outlet, otherwise
the objects may obstruct the proper ventilation of the control panel.
A heat exchanger, if used, should be located in front of the SSRs to
ensure the efficiency of the heat exchanger.
• Please reduce the ambient temperature of SSRs. The rated load
current of an SSR is measured at an ambient temperature of 40°C.
• An SSR uses a semiconductor in the output element. This causes
the temperature inside the control panel to increase due to heating
resulting from the passage of electrical current through the load. To
restrict heating, attach a fan to the ventilation outlet or air inlet of
the control panel to ventilate the panel. This will reduce the ambient
temperature of the SSRs and thus increase reliability. (Generally,
each 10 °C reduction in temperature will double the expected life.)
Load current (A)
60 mm min.
Required number
of fans per SSR
5A
0.08
10 A
0.16
20 A
40 A
0.31
0.62
75 A
1.2
90 A
1.44
Example: For 10 SSRs with load currents of 10 A,
0.16 x 10 = 1.6
Vertical direction
30 mm min.
80 mm min.
Thus, 2 fans would be required.
Size of fans: 92 mm2, Air volume: 0.7 m3/min,
Ambient temperature of control panel: 30 °C
If there are other instruments that generate heat in the control panel
other than SSRs, additional ventilation will be required.
Solid State Relay
G3NA
463
High-capacity Heat Sink
(Y92B-P250NF)
Ratings and Characteristics of Highcapacity Heat Sink (Y92B-P250NF)
DIN-track Mounting
Fan Ratings
• Assembled DIN Tracks are heavy. Mount the DIN Tracks securely.
Be sure that the Heat Sink is securely locked to the DIN Track.
• Attach End Plates (PFP-M, order separately) to both ends of the
Units on the DIN Track to hold them in place.
• To mount a Heat Sink to a DIN Track, press down at the point indicated by arrow 1 in the diagram and then press in the Heat Sink at
the point indicated by arrow 2.
Rated voltage
200 V
Operating voltage
85% to 110% of rated voltage
Frequency
50/60 Hz
Rated current
(See note.)
0.085 A at 50 Hz
0.072 A at 60 Hz
Rated speed
(See note.)
2,500 r/min at 50 Hz
2,850 r/min at 60 Hz
Note: Average values.
Thermostat Ratings
Vertical
Operating temperature
Approx. 90°C
Contact ratings
3 A at 240 VAC, resistive load
3 A at 24 VDC, resistive load
Fan/Thermostat Characteristics
Applicable DIN Track
Mounting is possible on TE35-15Fe (IEC 60715) DIN tracks. DIN
tracks from the following manufacturers can be used.
Manufacturer
Thickness: 1.5 mm
Thickness: 2.3 mm
Schneider
AM1-DE2000
---
WAGO
210-114 or 210-197
210-118
PHOENIX
N35/15
N35/15/15-2.3
Direct Mounting
• Prepare mounting holes as shown in the diagram. Tightening
torque: 0.98 to 1.47 N•m
64
Insulation class
(Fan)
VDE:E (120°C)
UL: A (105°C)
CSA:B (130°C)
Protection class
1
Insulation
resistance
100 MΩ min. (at 500 VDC) between power supply connections and non-charged metal part
Dielectric strength Fan:
Thermostat:
2,000 VAC for 1 min
1,500 VAC for 1 min
Between power supply connections and noncharged metal part
Ambient operating −30 to 70°C (with no icing)
temperature
Storage
temperature
−40 to 85°C (with no icing)
Ambient operating 25% to 85%
humidity
130±0.3
• When mounting a Heat Sink directly, first remove the Fan Unit, then
mount the Heat Sink by itself before attaching the Fan Unit again.
(Remove the two screws shown in the following diagram.)
Remove screws
Fan Unit
Heat Sink
• First, temporarily mount the Heat Sink with the bottom two screws
and then attach the top two screws with the mounting bracket sandwiched between the Heat Sink and mounting surface. Finally,
tighten all four screws.
464
Solid State Relay
G3NA
• Use a commercial power supply (50/60 Hz) for the Fan.
• Be sure to turn OFF the power supply and wait for the blades to
stop before inspecting the Fan.
• High-precision ball bearings are used in the fan and these may be
damaged if the Fan is dropped or otherwise subjected to shock.
The life and characteristics of the Fan will be reduced if the bearings are damaged. Do not subject the Fan to shock.
• The life of the Fan depends on the ambient temperature, As a
guideline, the Fan life is 40,000 hours for continuous usage at 40°C.
• Be sure there are no objects near the air vents that would restrict
air flow and no loose objects, such as electrical lines.
• The tightening torque of the mounting screw when replacing the
Fan is 0.38 to 0.50 N•m.
• Terminals equivalent to Faston #110 are used for the Fan power
supply terminals.
• Connect the ground screw hole on the fan to PE.
Preventing Overheating with a
High-capacity Heat Sink (Y92B-P250NF)
• When the High-capacity Heat Sink is used, high-capacity switching
at 75 A or 90 A requires forced cooling with a fan. Connect the Fan
to a power supply according to its ratings specifications.
• If the Fan stops due to a power supply error, due to foreign matter
in the power supply connection, or due to aging, the Heat Sink will
heat to high temperatures, possibly resulting in failure of the SSR or
adverse affects on other devices. Implement an overheating prevention measure, such as turning OFF the load current, if the Heat
Sink overheats.
• A thermostat is provided to detect overheating. The thermostat
uses a NC contact, i.e., the circuit will be opened for overheating.
This thermostat can be used to stop the operation of the SSR.
Implement an overheating prevention measure by using this signal
to output an alarm or perform another response applicable to the
system. Also, confirm that there is no problem with the overall system.
• Do not connect the thermostat directly to the load power supply.
Connect it to a contactor or other shutoff device connected above
the SSR.
• Terminals equivalent to Faston #187 are used for the thermostat
terminals.
• Do not place heat-dissipating silicon grease on the thermostat.
• Do not solder the thermostat terminals.
• The following diagram shows a protective circuit example.
Circuit breaker
(contact side)
Circuit breaker
(coil side)
Coil
power
supply
Thermostat
(NC contact)
Input side
Circuit
breaker
Ventilating a High-capacity Heat Sink
(Y92B-P250NF)
• Refer to Ventilation Outside the Control Panel.
Operating Conditions
• Do not apply currents exceeding the rated current otherwise, the
temperature of the G3NA may rise excessively.
• As protection against accidents due to short-circuiting, be sure to
install protective devices, such as fuses and no-fuse breakers, on
the power supply side.
• Do not apply overvoltages to the input circuit or output circuit. Failure or burning may result.
• Do not drop the G3NA or otherwise subject it to abnormal shock.
Malfunction or failure may result.
• Keep the cooling system running continuously during the ON/OFF
operation of the SSR. This is to allow residual heat to dissipate
while the SSR is OFF.
Noise Terminal Voltage
According to EN55011
The G3NA-UTU complies with EN55011 standards when a capacitor
is connected to the load power supply as shown in the following circuit diagram.
Load
C1
Input
Capacitor C1
0.1 µF
G3NA-UTU Output
type
The loss time will increase when the G3NA is used at a low applied
voltage or current. Be sure that this does not cause any problems.
Loss time
Using DC Loads
For a DC or L load, a diode should be connected in parallel the load
to absorb the counter electromotive force of the load.
Load
Input
Load power
supply
SSR
Fuses
Load side
3 m max.
Loss Time
Load
Y92B-P250NF
G3NA
• Connect capacitor C1 to both sides of the input terminals for a
G3NA with a DC input.
• Connect capacitor C2 to both sides of the load power supply output.
• Connect the varistor to both sides of the G3NA output terminals.
• Do not use an input line that is longer than 3 m.
Capacitor C2
• G3NA-2@@: 1 µF, 250 VAC
• G3NA-4@@: 0.5 µF, 500 VAC
C2
Connect a quick-break fuse in series with the load as a short-circuit
protection measure. Use one of the fuses in the following table or one
with equivalent or better characteristics.
Recommended Fuses
G3NA rated
load current
5A
8A
10 A
15 A
20 A
25 A
30 A
40 A
45 A
50 A
75 A
80 A
100 A
Fuse model
60LFF5
60LFF8
60LFF10
60LFF15
60LFF20
50SHA20
60PFF25
50SHA25
60PFF30
50SHA30
50SHA40
50SHA45
50SHA50
50SHA75
50SHA80
50SHB100
Manufacturer
Applicable SSR
Kyosan Electric G3NA-205B
Manufacturing G3NA-210B
Company
G3NA-220B
G3NA-240B
G3NA-275B-UTU
G3NA-290B-UTU
Reverse Connection
The output terminal side of the G3NA-D210B is connected to a builtin diode to protect the SSR from damage that may result from
reverse connection. The SSR, however, cannot withstand one minute
or more if the wires are connected in reverse. Therefore, pay the
utmost attention not to make polarity mistakes on the load side.
Varistor
• G3NA-2@@: 470 V, 0.6 W
• G3NA-4@@: 910 V, 0.8 W
Solid State Relay
G3NA
465
■ Precautions on Operating and Storage Environments
1. Operating Ambient Temperature
3. Vibration and Shock
The rated value for the ambient operating temperature of the G3NA
is for when there is no heat build-up. For this reason, under conditions where heat dissipation is not good due to poor ventilation, and
where heat may build up easily, the actual temperature of the G3NA
may exceed the rated value resulting in malfunction or burning.
Do not subject the G3NA to excessive vibration or shock. Otherwise
the G3NA may malfunction and internal components may be
deformed or damaged, resulting in failure of the G3NA to operate. To
prevent the G3NA from abnormal vibration, do not install the G3NA in
locations or by means that will subject it to vibration from other
devices, such as motors.
When using the G3NA, design the system to allow heat dissipation
sufficient to stay below the Load Current vs. Ambient Temperature
characteristic curve. Note also that the ambient temperature of the
G3NA may increase as a result of environmental conditions (e.g., climate or air-conditioning) and operating conditions (e.g., mounting in
an airtight panel).
2. Transportation
Do not allow the G3NA or the resin portion of the Fan’s thermostat to
come in contact with solvents, such as thinners or gasoline. Doing so
will dissolve the markings on the G3NA.
5. Oil
When transporting the G3NA, observe the following points. Not doing
so may result in damage, malfunction, or deterioration of performance characteristics.
•
•
•
•
4. Solvents
Do not allow the G3NA terminal cover to come in contact with oil.
Doing so will cause the cover to crack and become cloudy.
Do not drop the G3NA or subject it to severe vibration or shock.
Do not transport the G3NA if it is wet.
Do not transport the G3NA under high temperatures or humidity.
Do not transport the G3NA without packing it properly.
■ Operation
1. Leakage Current
2. Screw Tightening Torque
A leakage current flows through a snubber circuit in the G3NA even
when there is no power input. Therefore, always turn OFF the power
to the input or load and check that it is safe before replacing or wiring
the G3NA.
Tighten the G3NA terminal screws properly. If the screws are not
tight, the G3NA will be damaged by heat generated when the power
is ON. Perform wiring using the specified tightening torque.
3. Handling Relays
Varistor
Trigger circuit
Input circuit
Switch element Snubber circuit
Do not mount the G3NA when your hands are oily or dirty, e.g., with
metal powder. These may cause G3NA failure.
Leakage current
4. Do Not Drop
Be careful not to drop a Relay or Heat Sink onto any part of your
body while working. Injury may result. This is particularly true for the
High-capacity Heat Sink (Y92B-P250NF), which weighs 2.5 kg.
466
Solid State Relay
G3NA
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
These terms and conditions
(b) Seller:
Omron Electronic Components LLC and its subsidiaries
(c) Buyer:
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at the time the purchase order is accepted by
Seller. Payments for Products received are due net 30 days unless otherwise stated in
the invoice. Buyer shall have no right to set off any amounts against the amount owing in
respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real
property and income taxes), including any interest or penalties thereon, imposed directly
or indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license
taxes) shall be charged to and remitted by Buyer to Seller.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel
any unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products
shall pass from Seller to Buyer, provided that Seller shall retain a security interest in
the Products until the full purchase price is paid by Buyer;
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier or any claim related to pricing or other charges
must be presented in detail in writing to Seller within 30 days of receipt of shipment.
III. PRECAUTIONS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
(b) Use in consumer Products or any use in significant quantities.
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
IV. WARRANTY AND LIMITATION
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
correctly handled, stored, installed and maintained and not subject to contamination,
abuse, misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
V. INFORMATION; ETC.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and descriptions may be changed at
any time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c) disclosure to noncitizens of regulated technology or information.
VI. MISCELLANEOUS
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).
Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any
dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
Solid State Relay
G3NA
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in
Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
3. Performance Data. Performance data given in this publication is provided as
a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
Global - http://www.omron.com
USA - http://www.components.omron.com
847-882-2288
Cat. No. X301-E-1
Solid State Relay
06/09
G3NA
Specifications subject to change without notice
Printed in USA
Similar pages