Vishay M83401 Thin film resistor network military Datasheet

M83401, C83401
www.vishay.com
Vishay Dale Thin Film
Thin Film Resistor Network Military, MIL-PRF-83401 Qualified,
Type RZ070, RZ080, RZ090, RZ210, RZ220, RZ230,
Single-In-Line SIP
FEATURES
Qualified to meet MIL-PRF-83401 characteristic “R”, “V”, and “H”
These resistor networks are available in 6 pins, 8 pins, and
10 pins in schematic C and G styles. Custom circuits are not
available. Schematic C and G only. They incorporate Vishay
Dale Thin Film’s patented passivated nichrome film to give
superior performance on temperature coefficient of
resistance, thermal stability, noise, voltage coefficient,
power handling and resistance stability. The leads are
attached to the metallized alumina substrates by
Thermo-Compression bonding. The body is molded
thermoset plastic with gold plated copper alloy leads. This
product will outperform all of the requirements of
characteristic “R”, “V”, and “H” of MIL-PRF-83401.
•
•
•
•
•
•
•
•
MIL-PRF-83401 qualified (cage code 57489)
Low Profile 0.195" (4.95 mm seated height)
Characteristics R (± 25 ppm), H, V, K, and M
Hot fused tin/lead 60/40 solder dipped
Rugged molded low profile construction with standoff
100 % screened to groups A MIL-PRF-83410 testing
Tolerances to 0.1 %
Isolated and bussed (schematic C and G)
TYPICAL PERFORMANCE
ABSOLUTE
TRACKING
25
5
TCR
ABSOLUTE
RATIO
0.1
0.1 to 0.05
TOL.
SCHEMATIC
C Schematic (Pin 1 Common)
1
2
3
4
G Schematic (Isolated)
N
1
2 3
4
N
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
SPECIFICATIONS
Passivated nichrome
6, 8, 10
100  to 200 k per resistor
± 25 ppm/°C to 300 ppm/°C
± 5 ppm/°C
± 0.1 % to ± 5.0 %
± 0.1 % to R1
0.06 mW to 0.120 mW (per element typical at + 25 °C) (1)
0.18 W to 1.08 W (1)
R ± 0.05 %
R ± 0.015 %
< 0.1 ppm/V
100 V
- 55 °C to + 125 °C
- 55 °C to + 125 °C
< - 30 dB
< 0.08 μV/°C
R ± 0.01 %
R ± 0.002 %
CONDITIONS
Tolerance dependent (2)
- 55 °C to + 125 °C (1)
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Notes
(1) Consult MIL-PRF-83401
(2) “H” characteristic 100  to 100 k resistance range at 0.1% best
“R” characteristic 250  to 100 k resistance range at 0.1% best
“R” characteristic 250  to 200 k resistance range at 1% best
Revision: 01-Mar-13
Document Number: 60116
61
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M83401, C83401
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
Part
Number
L
Indicates
Pin 1
Date
Code
Vishay
Logo
G
INCHES
MILLIMETERS
A
0.035
0.89
B
0.040
1.02
C
0.100 ± 0.005 non-accum.
2.54 ± 0.13
D
0.019 ± 0.006 typical
0.48 ± 0.15
E
E
0.187 ± 0.010
4.75 ± 0.25
F
0.135
3.43
F
G
0.095
2.41
A
B
H
C
DIMENSION
D
H
0.012 ± 0.004
0.31 ± 0.10
L (6 Pins)
0.583 - 0.023/+ 0.01
14.81 - 0.584/+ 0.254
L (8 Pins)
0.783 - 0.023/+ 0.01
19.89 - 0.584/+ 0.254
L (10 Pins)
0.983 - 0.023/+ 0.01
24.97 - 0.584/+ 0.254
CONSTRUCTION
High Purity
Alumina Substrate
Sputtered
Film System
Gold Plated
Copper Leads
Gold to Gold
Thermo-Compression Bond
(No Internal Solder)
MECHANICAL SPECIFICATIONS
Resistive Element
TAMELOX passivated nichrome
Substrate Material
Alumina
Body Molded
Epoxy
Terminals
Copper alloy
Plating/Solder
Nickel/gold/Sn63 fussed
POWER DERATING
C Schematic (Pin 1 Common Characteristic H)
G Schematic (Isolated Characteristic H)
Low Profile
Low Profile
0.84
0.60
0.54
10 Pin Package
Power Rating (W)
Power Rating (W)
1.08
8 Pin Package
6 Pin Package
10 Pin Package
(Char. R and V)
0.60
0.48
0.36
0.30
Single Resistor
Single Resistor
(Char. R and V)
- 55
+ 25
0
0.12
0.06
Revision: 01-Mar-13
0.12
0.06
+ 70
+ 125 + 150
Ambient Temperature °C
- 55
10 Pin Package
8 Pin Package
6 Pin Package
10 Pin Package
(Char. R and V)
Single Resistor
Single Resistor
(Char. R and V)
0
+ 25
+ 70
+ 125 + 150
Ambient Temperature °C
Document Number: 60116
62
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
M83401, C83401
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M8340107H1000BCUF
M
8
3
4
0
1
0
7
H
1
0
0
0
B
C
U
F
V
MODEL
(5 digits)
SCHEMATIC
(2 digits)
CHARACTERISTIC
(1 digits)
RESISTANCE
(4 digits)
TOLERANCE
(1 digits)
SCHEMATIC
(1 digits)
PACKAGING
(2 digits)
VENDOR
(1 digits)
M83401
Single
in-line
resistor
network
low profile
07 = 6 pin
08 = 8 pin
09 = 10 pin
H = 50 ppm/°C
V = 50 ppm/°C
5 ppm/°C track
R = 25 ppm/°C
5 ppm/°C track
K = 100 ppm/°C
M = 300 ppm/°C
First 3 digits
are significant
figures and the
last digit specifies
the number of
zeros to follow.
(100  to 100 k)
Examples:
1000 = 100 
1001 = 1000 
B = 0.1 % (3)
D = 0.5 % (3)
F=1%
G=2%
J=5%
C=
Pin 1
common
G=
Isolated
resistors
UF =
Tubed
UI =
100 min, 1 mult
(item single
lot date code)
UP =
100 min.,1 mult
(package unit
single lot date)
V (2) =
Vishay Dale
Thin Film
21 = 6 pin (1)
22 = 8 pin (1)
23 = 10 pin (1)
C83401
Non burn in
screened
network
Notes
(1) No internal solder
(2) “V" is not required for characteristics R, H, and V, it is only required for K and M. Characteristics tolerance equal to or greater than 1 %."
(3) “H” characteristic 100  to 100 k resistance range at 0.1% best
“R” characteristic 250  to 100 k resistance range at 0.1% best
“R” characteristic 250  to 200 k resistance range at 1% best
MODEL
M83401
C83401
SCHEMATIC
07 = 6 pin (RZ070)
08 = 8 pin (RZ080)
09 = 10 pin (RZ090)
21 = 6 pin (RZ210)
22 = 8 pin (RZ220)
23 = 10 pin (RZ230)
CHARACTERISTIC
TOLERANCE
H = 50 ppm/°C
100 to 100K
B, D, F, G, J
V = 50 ppm/°C/
5 ppm/°C track
250 to 100K
B, D, F, G, J
250 to 200K
F, G, J
R = 25 ppm/°C
5 ppm/°C track
250 to 100K
B, D, F, G, J
250 to 200K
F, G, J
100 to 100K
B, D, F, G, J
K = 100 ppm/°C
M = 300 ppm/°C
Revision: 01-Mar-13
RESISTANCE
RANGE
SCHEMATIC
C, G
Document Number: 60116
63
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
Similar pages