MPS MP2013GQ 40v, 150ma, low quiescent current linear regulator Datasheet

MP2013
40V, 150mA, Low Quiescent Current
Linear Regulator
DESCRIPTION
FEATURES
The MP2013 is a low power linear regulator that
supplies power to systems with high voltage
batteries. It includes a wide 2.5V to 40V input
range, low dropout voltage and low quiescent
supply current. The low quiescent current and
low dropout voltage allow operations at
extremely low power levels. Therefore, the
MP2013 are ideal for the low power
microcontrollers and the battery-powered
equipments.
•
•
•
The MP2013 provides wide variety of fixed
output voltage options (if request): 1.8V, 1.9V,
2.3V, 2.5V, 3.0V, 3.3V, 3.45V, 5.0V; and also
provides the output adjustable option (from
1.215V to 15V).
The regulator output current is internally limited
and the device is protected against over-load
and over-temperature conditions.
The MP2013 also includes thermal shutdown
and current limiting fault protection, and is
available in QFN6 (2x2mm), QFN8 (3x3mm)
and TSOT23-5 packages.
•
•
•
•
•
•
•
•
2.5V to 40V Input Range
3.2µA Quiescent Supply Current
Stable With low-value output ceramic
capacitor (> 0.47 μF)
150mA specified current
620mV Dropout at 150mA Load
Available in Fixed and Adjustable output
(1.215 V to 15 V) versions
Output ±2% Accuracy
Specified current limit
Thermal Shutdown
-40°C to +125°C Specified Junction
Temperature Range
Available in TSOT23-5, QFN6 (2x2mm), or
QFN8 (3x3mm) Packages
APPLICATIONS
•
•
•
•
•
Industrial/Automotive Applications
Portable/Battery-Powered Equipment
Ultra low power Microcontrollers
Cellular Handsets
Medical Imaging
All MPS parts are lead-free and adhere to the RoHS directive. For MPS green
status, please visit MPS website under Products, Quality Assurance page.
“MPS” and “The Future of Analog IC Technology” are registered trademarks of
Monolithic Power Systems, Inc.
TYPICAL APPLICATION
IN1
IN1
OUT
IN2
FB
GND
Output Adjustable Version
MP2013 Rev. 1.0
4/23/2014
OUT
Vout
IN2
VOUT
FB
GND
Output Fixed Version
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
1
MP2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR
ORDERING INFORMATION
Part Number*
MP2013GJ
MP2013GG
MP2013GQ
MP2013GQ-33
Package
TSOT23-5
QFN6 (2x2mm)
QFN8 (3x3mm)
QFN8 (3x3mm)
Top Marking
AFF
AX
AFF
AGG
* For Tape & Reel, add suffix –Z (e.g. MP2013GJ–Z);
PACKAGE REFERENCE
TSOT23-5
QFN6(2x2mm)
QFN8(3x3mm)
ABSOLUTE MAXIMUM RATINGS (1)
Thermal Resistance
IN1, IN2 ..................................... -0.3V to +42V
OUT ............................................. -0.3V to +17V
FB ................................................ -0.3V to +6V
Lead Temperature ................................... 260°C
Storage Temperature ............... -65°C to +150°C
(2)
Continuous Power Dissipation (TA = +25°C)
QFN8(3x3mm) .........................................2.08W
QFN6(2x2mm) .........................................1.25W
TSOT23-5 ................................................0.45W
TSOT23-5 ............................. 220 .... 110 .. °C/W
QFN6(2x2mm) ....................... 80 ...... 16 ... °C/W
QFN8(3x3mm) ....................... 48 ...... 11 ... °C/W
ESD SUSCEPTIBILITY (3)
HBM (Human Body Mode) ..........................2kV
MM (Machine Mode) ................................ 200V
Recommended Operating Conditions
(4)
Supply Voltage VIN .......................... 2.5V to 40V
Output Voltage VOUT ................... 1.215V to 15V
Operating Junction Temp. (TJ). -40°C to +125°C
MP2013 Rev. 1.0
4/23/2014
(5)
θJA
θJC
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature TJ (MAX), the junction-toambient thermal resistance θJA, and the ambient temperature
TA. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by PD (MAX) = (TJ
(MAX)-TA)/θJA. Exceeding the maximum allowable power
dissipation will cause excessive die temperature, and the
regulator will go into thermal shutdown. Internal thermal
shutdown circuitry protects the device from permanent
damage.
3) Devices are ESD sensitive. Handling precaution
recommended.
4) The device is not guaranteed to function outside of its
operating conditions.
5) Measured on JESD51-7, 4-layer PCB.
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
2
MP2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR
ELECTRICAL CHARACTERISTICS
VOUT(NOM) = 5V (VIN≥6V) or FB (VIN<6V), IOUT = 1mA, COUT = 1μF, TJ = 25°C, unless otherwise noted.
Parameter
Symbol
Input Voltage
Output Voltage range
Condition
Min
2.5
40
V
1.215
15
V
MP2013
IGND
MP2013-33
ILIMIT
Output Voltage Accuracy
FB Voltage
VFB
Dropout Voltage
VIN=VOUT(NOM)-0.1V
VDROPOUT
FB Pin Input Current
IFB
(6)
Line Regulation
(7)
Load Regulation
Output Voltage PSRR
MP2013 Rev. 1.0
4/23/2014
(8)
Units
VIN
VIN=2.5V to 40V
Load Current Limit
Max
VOUT
0<IOUT<1mA,
GND Pin Current
Typ
1mA<IOUT<30mA,
VIN=2.5V to 15V
30mA<IOUT<150mA,
VIN=3V to 6V
0<IOUT<1mA,
VIN=4.3V to 40V
1mA<IOUT<30mA,
VIN=4.3V to 15V
30mA<IOUT<150mA,
VIN=4.3V
3.2
7.2
14
18
35
50
µA
4.4
8
15
19
35
50
VOUT = 0V,
VIN=6V to 15V
MP2013-33, VIN=4.3V, IO=0
180
270
400
mA
3.234
3.3
3.366
V
FB = OUT, VIN=5V
1.191
1.215
1.239
V
MP2013, ILOAD = 150mA,
VOUT(NOM)=5V
620
900
MP2013-33, ILOAD = 150mA
740
900
–50
+4
+50
nA
0.98
1.25
1.52
μA
0.01
0.05
%/V
0.003
0.005
0.005
0.01
MP2013, VFB = 1.3V,
VIN=6V,OUT floating
MP2013-33,VFB = 1.3V,
VIN=6V,OUT floating
VIN = 2.5 to 40V,
ILOAD = 1mA, OUT = FB
MP2013, ILOAD = 100μA to 150mA,
OUT = FB, VIN=3V to 6V
MP2013-33, ILOAD = 100μA to
150mA, VIN=4.3V to 6V
100Hz, CIN = 100pF, COUT = 4.7μF
ILOAD=10mA, VIN = 6V
1kHz, CIN = 100pF, COUT = 4.7μF
ILOAD=10mA, VIN = 6V
100kHz,CIN = 100pF, COUT = 4.7μF
ILOAD=10mA, VIN = 6V
mV
%/mA
58
dB
41
dB
55
dB
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
3
MP2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR
ELECTRICAL CHARACTERISTICS (continued)
VOUT(NOM) = 5V (VIN≥6V) or FB (VIN<6V), IOUT = 1mA, COUT = 1μF, TJ = 25°C, unless otherwise noted.
Parameter
Symbol
Thermal Shutdown
(8)
Hysteresis
Notes:
6) Line Regulation=
(8)
TSD
150
ΔTSD
| VOUT[ VIN(MAX ) ] − VOUT[ VIN(MIN) ] |
(VIN(MAX) − VIN(MIN) ) × VOUT(NOM)
7) Load Regulation=
Min
Typ
RLOAD=500Ω,
COUT=6.8µF, VOUT = 5V
Startup Response Time
Thermal Shutdown
Condition
| VOUT[IOUT (MAX ) ] − VOUT[IOUT (MIN) ] |
(IOUT(MAX) − IOUT(MIN) ) × VOUT(NOM)
Max
Units
2.5
ms
165
°C
20
°C
× (% / V)
× (% / mA)
8) Derived from bench characterization. Not tested in production.
MP2013 Rev. 1.0
4/23/2014
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
4
MP2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR
PIN FUNCTIONS
Pin #
Name Description
TSOT23-5
QFN6
(2x2mm)
QFN8
(3x3mm)
3
1
1
IN1
Input Voltage. Connect a 2.5V to 40V supply to this pin.
2
2
2
IN2
VIN pin to power internal logic. Connect to IN1.
1
3,
exposed
pad
4,
exposed
pad
GND
5
4
5
FB
4
6
8
OUT
5
3, 6, 7
NC
MP2013 Rev. 1.0
4/23/2014
Ground (the exposed pad and GND pin must be connected to the
same ground plane)
Feedback input pin, regulated to 1.215V nominally. Connected to an
external resistive divider between OUT and GND to set output
voltage. For fixed output version, this pin can be just float.
Regulated output voltage, only low-value ceramic capacitor (≥
0.47μF) on output is required for stability.
No connection. May be left open or tied to Ground for improved
thermal performance.
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
5
MP2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR
TYPICAL CHARACTERISTICS
MP2013 Rev. 1.0
4/23/2014
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
6
MP2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR
TYPICAL PERFORMANCE CHARACTERISTICS
CIN = 1μF, COUT = 4.7μF, VOUT=5V, TA = +25ºC, unless otherwise noted
MP2013 Rev. 1.0
4/23/2014
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
7
MP2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
CIN = 1μF, COUT = 4.7μF, VOUT=5V, TA = +25ºC, unless otherwise noted
MP2013 Rev. 1.0
4/23/2014
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
8
MP2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR
OPERATION
The MP2013 is a linear regulator that supplies
power to systems with high voltage batteries. It
includes a wide 2.5V to 40V input range, low
dropout voltage and low quiescent supply
current.
The MP2013 provides wide variety of fixed
output voltage options: 1.8V, 1.9V, 2.3V, 2.5V,
3.0V, 3.3V, 3.45V, 5.0V; and also provides the
output adjustable option (from 1.215V to 15V).
The output adjustable version has an output
that is adjustable from 1.215V to 15V with a
simple resistor divider. It uses external
feedback, allowing the user to set the output
voltage with an external resistor divider. The
typical FB pin voltage is 1.215V.
The regulator output current is internally limited
and the device is protected against over-load
and over-temperature conditions.
The peak output current is limited to around
270mA,
which
exceeds
the
150mA
recommended continuous output current.
When the junction temperature is too high, the
thermal sensor sends a signal to the control
logic that will shutdown the IC. The IC will
restart when the temperature has sufficiently
cooled.
The maximum power output current is a
function of the package’s maximum power
dissipation for a given temperature.
The maximum power dissipation is dependent
on the thermal resistance of the case and the
circuit board, the temperature difference
between the die junction and the ambient air,
and the rate of air flow. The GND pin and
Exposed Pad must be connected to the ground
plane for proper dissipation.
VIN1
UVLO
Vreference
EA
VOUT
VIN2
GND
FB
For fixed output
version only
Figure 1: Functional Block Diagram
MP2013 Rev. 1.0
4/23/2014
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
9
MP2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR
APPLICATION INFORMATION
COMPONENT SELECTION
Setting the Output Voltage
Set the output voltage of the MP2013 by using a
resistor divider as shown:
OUT
VOUT
MP2013
R1
FB
GND
R2
Figure 2: FB Resistor Divider to Set VOUT
Choose R2=1MΩ to maintain a 1.215µA
minimum load. Calculate the value for R1 using
the following equation:
 V

R1 = R2 ×  OUT − 1
 1.215V 
OUTPUT NOISE
For fixed output version, VOUT also can be
adjusted by adding external resistor divider. Just
note to take internal FB resistor divider into
consideration when choose external divider.
MP2013
VOUT
OUT
R1_IN
R2_IN
GND
R1
FB
R2
Figure 3: FB Divider of Fixed Output Version
The internal FB resistor dividers for different fixed
output versions please see below table.
Table 1: Internal FB Resistor Divider
Fixed Output Voltage
R1_IN
R2_IN
3.3V
1.72MΩ
1MΩ
MP2013 Rev. 1.0
4/23/2014
Input Capacitor
For proper operation, place a ceramic capacitor
(C1) between 1µF and 10µF of dielectric type
X5R or X7R between the input pin and ground.
Larger values in this range will help improve line
transient response.
Output Capacitor
For stable operation, use a ceramic capacitor
(C2) of type X5R or X7R between 1µF and 10µF.
Larger values in this range will help improve load
transient response and reduce noise. Output
capacitors of other dielectric types may be used,
but are not recommended as their capacitance
can deviate greatly from their rated value over
temperature.
To improve load transient response, add a small
ceramic (X5R, X7R or Y5V dielectric) 22nF feed
forward capacitor in parallel with R1. The feed
forward capacitor is not required for stable
operation.
The MP2013 will exhibit noise on the output
during normal operation. This noise is negligible
for most applications. However, in applications
that include analog-to-digital converters (ADCs)
of more than 12 bits, one needs to consider the
ADC’s power supply rejection specifications. The
feed forward capacitor C2 across R1 will
significantly reduce the output noise.
PCB LAYOUT GUIDE
PCB layout is very important to achieve good
regulation, ripple rejection, transient response
and thermal performance. It is highly
recommended to duplicate EVB layout for
optimum performance.
If change is necessary, please follow these
guidelines and take figure 5 for reference.
1) Input and output bypass ceramic capacitors
are suggested to be put close to the IN Pin
and OUT Pin respectively.
2) Ensure all feedback connections are short
and direct. Place the feedback resistors and
compensation components as close to the
chip as possible.
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
10
MP2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR
3)
Connect IN, OUT and especially GND
respectively to a large copper area to cool
the chip to improve thermal performance and
long-term reliability.
VOUT
VIN
IN1
C1
C2
OUT
MP2013
IN2
GND
C2
GND
R2
R1
GND
FB
5
4
NC
6
3
NC
NC
7
2
IN2
OUT
8
1
IN1
R1
FB
R2
C3
OUT
C3
C1
IN
Figure 5: PCB Layout (Top Layer)
GND
C1
1 GND
DESIGN EXAMPLE
R2
C3
FB 5
R1
2 IN2
3 IN1
C1
1uF
IN2
GND
C2 R1
22nF 1.72MΩ
FB
R2
1MΩ
C3
4.7uF
GND
FB
4
Figure 6: Design Example
3 GND
NC
5
2
IN2
OUT
6
1
IN1
C3
MP2013 Rev. 1.0
4/23/2014
OUT
3.3V
OUT
R1
VOUT
IN1
MP2013
R2
OUT
VIN
C2
OUT 4
IN
C2
Below is a design example following the
application guidelines for VOUT=3.3V with
feedforward cap.
C1
IN
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
11
MP2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR
TYPICAL APPLICATION CIRCUITS
VIN
VOUT
IN1
OUT
3.3V
MP2013
C1
1uF
IN2
GND
R1
1.72MΩ
FB
C2
4.7uF
R2
1MΩ
Figure 7: 3.3V Output Typical Application Circuit
VIN
VOUT
IN1
OUT
3.3V
MP2013
C1
1uF
IN2
GND
C2 R1
22nF 1.72MΩ
FB
R2
1MΩ
C3
4.7uF
Figure 8: 3.3V Output with Feedforward Capacitor
VOUT
VIN
IN1
OUT
5V
MP2013
C1
1uF
IN2
GND
R1
3.1MΩ
FB
R2
1MΩ
C2
4.7uF
Figure 9: 5V Output Typical Application Circuit
MP2013 Rev. 1.0
4/23/2014
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
12
MP2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR
PACKAGE INFORMATION
QFN8 (3x3mm)
0.30
0.50
2.90
3.10
PIN 1 ID
MARKING
0.20
0.30
2.90
3.10
PIN 1 ID
INDEX AREA
1.45
1.75
PIN 1 ID
SEE DETAIL A
8
1
2.25
2.55
0.65
BSC
4
5
TOP VIEW
BOTTOM VIEW
PIN 1 ID OPTION A
0.30x45º TYP.
PIN 1 ID OPTION B
R0.20 TYP.
0.80
1.00
0.20 REF
0.00
0.05
DETAIL A
SIDE VIEW
NOTE:
2.90
0.70
1) ALL DIMENSIONS ARE IN MILLIMETERS.
2) EXPOSED PADDLE SIZE DOES NOT INCLUDE MOLD FLASH.
3) LEAD COPLANARITY SHALL BE0.10 MILLIMETER MAX.
4) JEDEC REFERENCE IS MO-229, VARIATION VEEC-2.
5) DRAWING IS NOT TO SCALE.
1.70
0.25
2.50
0.65
RECOMMENDED LAND PATTERN
MP2013 Rev. 1.0
4/23/2014
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
13
MP2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR
QFN6 (2x2mm)
1.90
2.10
0.30
0.40
PIN 1 ID
MARKING
0.20
0.30
1.90
2.10
PIN 1 ID
INDEX AREA
0.65
0.85
PIN 1 ID
SEE DETAIL A
6
1
1.25
1.45
0.65
BSC
3
4
TOP VIEW
BOTTOM VIEW
0.80
1.00
0.20 REF
PIN 1 ID OPTION A
0.30x45º TYP.
PIN 1 ID OPTION B
R0.20 TYP.
0.00
0.05
SIDE VIEW
DETAIL A
1.90
0.70
NOTE:
0.70
1) ALL DIMENSIONS ARE IN MILLIMETERS.
2) EXPOSED PADDLE SIZE DOES NOT INCLUDE MOLD FLASH.
3) LEAD COPLANARITY SHALL BE0.10 MILLIMETER MAX.
4) JEDEC REFERENCE IS MO-229, VARIATION VCCC.
5) DRAWING IS NOT TO SCALE.
0.25
1.40
0.65
RECOMMENDED LAND PATTERN
MP2013 Rev. 1.0
4/23/2014
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
14
MP2013 - 40V, 150mA, LOW QUIESCENT CURRENT LINEAR REGULATOR
TSOT23-5
0.95
BSC
0.60
TYP
2.80
3.00
5
4
1.20
TYP
1.50
1.70
1
2.60
3.00
2.60
TYP
3
TOP VIEW
RECOMMENDED LAND PATTERN
0.84
0.90
1.00 MAX
0.09
0.20
SEATING PLANE
0.30
0.50
0.95 BSC
0.00
0.10
SEE DETAIL "A"
FRONT VIEW
SIDE VIEW
NOTE:
GAUGE PLANE
0.25 BSC
0o-8o
0.30
0.50
DETAIL “A”
1) ALL DIMENSIONS ARE IN MILLIMETERS.
2) PACKAGE LENGTH DOES NOT INCLUDE MOLD FLASH
,
PROTRUSION OR GATE BURR.
3) PACKAGE WIDTH DOES NOT INCLUDE INTERLEAD FLASH
OR PROTRUSION.
4) LEAD COPLANARITY(BOTTOM OF LEADS AFTER FORMING)
SHALL BE 0.10 MILLIMETERS MAX.
5) DRAWING CONFORMS TO JEDEC MO-193, VARIATION AA.
6) DRAWING IS NOT TO SCALE.
NOTICE: The information in this document is subject to change without notice. Please contact MPS for current specifications.
Users should warrant and guarantee that third party Intellectual Property rights are not infringed upon when integrating MPS
products into any application. MPS will not assume any legal responsibility for any said applications.
MP2013 Rev. 1.0
4/23/2014
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
15
Similar pages