Online data sheet DMT10-2-1211 DMT LONG RANGE DISTANCE SENSORS DMT10-2-1211 | DMT LONG RANGE DISTANCE SENSORS A B C D E F H I J K L M N O P Q R S T Ordering information Type Part no. DMT10-2-1211 1027604 Other models and accessories www.sick.com/DMT Detailed technical data Performance Measuring range 0.5 m ... 155 m, 90 % remission 0.5 m ... 65 m, 18 % remission 0.5 m ... 40 m, 6 % remission Resolution ≤ 1 mm Repeatability 7 mm 1) 2) 10 mm 3) 2) Accuracy ± 10 mm 4) 5) Response time 1 ms ... 4,000 ms 6) Cycle time 1,024 per sec. Average depth 1/16/64/256/1,024 Output time 1 ms ... 4,000 ms 7) Aperture delay time ≥ 1 s 7) Light source Laser, infrared Laser class 1 (EN 60825-1:Nov.2001, IEC 60825-1:ÄM2:2001) Typ. light spot size (distance) 20 mm (+ 5 x distance in m) Note Mechanical aperture Special characteristic Mechanical aperture 1) Dependent on distance and remission, 7 mm, at 6% ... 90% remission from 0.5 m ... 65 m, at 6% ... 18% remission from 0.5 m ... 40 m, at 6% remission from 0.5 m ... 15 m. 2) 3) Environmental conditions constant, min. warm-up time 30 min, average depth 1,024, statistical error 1 σ. Dependent on distance and remission, 10 mm, at 6% ... 90% remission from 60 m ... 155 m, at 6% ... 18% remission from 40 m ... 65 m, at 6% remission from 15 m ... 40 m. 4) 5) 6) 7) 23 °C air temperature, 977 hPa, min. warm-up time 30 min. When operating in ambient temperatures between +40 °C ... +55 °C the accuracy can decrease by factor 2.5. Dependent on averaging method, averaging depth, timeout, baud rate, data output, output format, and delay time. Dependent on averaging method, averaging depth, timeout, baud rate, data output, and output format. Interfaces Data interface PROFIBUS DP Interface for parametrization RS-232 2 DISTANCE SENSORS | SICK Online data sheet | 2016-03-17 13:18:11 Subject to change without notice DMT10-2-1211 | DMT LONG RANGE DISTANCE SENSORS Mechanics/electronics Supply voltage Vs DC 18 V ... 30 V, limit values Ripple < 5 Vpp 1) Power consumption ≤ 6 W 2) Initialization time 6s Connection type 1 x terminal connection, 1 x Sub D, 9-pin Weight Approx. 1,200 g Output current IA 100 mA 1) 2) May not fall short of or exceed VS tolerances. Without load. Ambient data Enclosure rating IP 65 Protection class III 1) Electromagnetic compatibility (EMC) EN 55011:1998 Kl. B, Gr.1 EN 61000-6-2 Ambient temperature Operation: –10 °C ... +55 °C Operation with cooling case: –10 °C ... +75 °C Storage: –25 °C ... +70 °C Temperature drift Typ. 0.6 mm/K 2) Typ. 0.3 mm/K 3) Mechanical load 1) 2) 3) Shock: (IEC 60068-2-27, –2-29) Sine: (IEC 60068-2-6) Reference voltage DC 50 V PELV-voltage (EN 50178) -10° C ... 0° C, +40 °C ... +55 °C. 0 °C ... +40 °C. 2016-03-17 13:18:11 | Online data sheet Subject to change without notice DISTANCE SENSORS | SICK 3 DMT10-2-1211 | DMT LONG RANGE DISTANCE SENSORS Dimensional drawing (Dimensions in mm (inch)) M 1 95 (3.74) 15.5 (0.61) 213.5 (8.41) 56.5 5 139 (5.47) 18 (2.22) 55 M6 21.5 42.5 (0.85) 12.5 6 96 (3.78) (0.14) 8 9 ß (2.17) (0.71) (0.49) 23 4 3.5 H I J K L M N O P Q R S T 70 (2.76) 6 DMT10-2-x2xx DML40-2-x2xx 99.5 (3.92) 1.5 (0.06) A B C D E F 7 (1.67) 102.5 (4.04) ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ Dust protection tube Laser pointer pilot light Alignment sight Function indicator Zero level Mounting hole M6 threaded - 6 mm deep Connector cover PG9 Sub-D, 9-pin Sub-D, 9-pin Connection type DMTxxx-2 RS-232/PROFIBUS Connector 5 1 6 ① ⑤ ⑥ ⑨ 4 9 NReset M NC = normally closed NC = normally closed DISTANCE SENSORS | SICK Online data sheet | 2016-03-17 13:18:11 Subject to change without notice DMT10-2-1211 | DMT LONG RANGE DISTANCE SENSORS DMTxxx-2 RS-232/PROFIBUS Socket, Sub-D, 9-pin 1 5 6 9 ① ⑤ ⑥ ⑨ NC = normally closed M L+ NC = normally closed DMTxxx-2 RS-232/PROFIBUS PG9 12 1 2 ① Pin 1 ② Pin 2 Connection diagram Connection diagram DMxxx-2-x21x RS-232 RS-232 1 2 3 5 RESET RxD TxD GND Connection type DMxxx-2 RS-232/PROFIBUS, socket 3 B 4 RTS 5 GND 6 +5 V 8 A DMTxxx-2 RS-232/PROFIBUS PG9 1 2 L+ M 2016-03-17 13:18:11 | Online data sheet Subject to change without notice DISTANCE SENSORS | SICK 5 DMT10-2-1211 | DMT LONG RANGE DISTANCE SENSORS A B C D E F H I J K L M N O P Q R S T Adjustment possible ßàáâ ⑩ ⑪ ⑫ ⑬ Q2 function indicator Q1 function indicator Operating indicator, green Plausibility (measurement error) red Recommended accessories Other models and accessories www.sick.com/DMT Brief description Type Part no. BEF-GH-DME 5309130 Connecting cable (female connector - open) 2020319 Terminal and alignment brackets Alignment unit for DMT/DML, incl. mounting material, steel, zinc coated, mounting hardware included Plug connectors and cables Head A: female connector, D-Sub, 9-pin, straight Head B: cable Cable: serial, unshielded, 3 m 6 DISTANCE SENSORS | SICK Online data sheet | 2016-03-17 13:18:11 Subject to change without notice Online data sheet SICK at a glance SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” Worldwide presence: Contacts and other locations – www.sick.com SICK AG | Waldkirch | Germany | www.sick.com