Spec Sheet PrintPDF FBAR/SAW Devices (SAW Duplexers) D5DA942M5K2S2 Features Item Summary SAW, Duplexer, 1.8x1.4x0.6mm Band 8 Lifecycle Stage Mass Production Standard packaging quantity (minimum) Taping Embossed 3000 , 15000pcs Products characteristics table External Dimensions W-CDMA / CDMA / LTE Dimension L 1.8 + 0/- 0.20 mm Type SAW Dimension W 1.4 + 0/- 0.20 mm Function Duplexer Dimension T Max 0.6 mm band Band 8 Insertion Loss (typ) 1.3/1.5 dB System (Tx-ANT/ANT-Rx) Isolation (typ) 58/56 dB Operating Temp. Range -30 to +85 ℃ RoHS2 Compliance (10 subst.) Yes REACH Compliance (168 subst.) Yes Soldering Reflow 2016.11.21 The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the Date at any time without notice. Before making final selection, please check product specification. http://www.ty-top.com Powered by TCPDF (www.tcpdf.org) Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 8 Duplexer DATE Part Number D5DA942M5K2S2 Version 2.1bbE Table 1-1. Item Tx to ANT Insertion loss(*1) Ripple VSWR Min Typ Max 882.4~912.6 - 1.3 - 880.24~914.76 882.4~912.6 Unit Remarks 2.4 dB (*2) -20~+85℃ - 3.6 dB -30~-20℃ - 1.6 3.2 dB -20~+85℃ - 1.5 3.2 dB Ta=+50℃,29dBm, 10000h, LTE modulation - 880.24~914.76 - 1.4 2.1 Ant 880.24~914.76 - 1.4 2.1 927.4~957.6 48 54 - dB(*2) -20~+85℃ 37 - - dB -30~-20℃ 42 - - dB -20~+0℃ 48 54 - dB +0~+85℃ 1565~1606 40 43 - dB 1760~1830 40 48 - dB 2640~2745 28 37 - dB 927.4~957.6 925.24~959.76 925.24~959.76 925.24~959.76 880.24~914.76 1805~1875 2400~2500 45 40 40 1.5 1.8 1.1 1.8 1.7 54 52 49 2.5 3.5 3.0 2.9 2.1 2.1 - dB (*2) dB dB dB 2685~2790 40 48 - dB 925.24~959.76 Insertion loss(*1) Ripple VSWR Specification Condition (MHz) Tx Absolute Attenuation ANT to Rx Final Electrical Specification 880.24~914.76 Input Power Jan.29, 2016 Rx Ant Absolute Attenuation 925.24~959.76 (*1) Specification of insertion loss excludes loss that comes from the test board. (*2) Integrated over +/-1.92MHz around the WCDMA channel center frequency - dB dB dB -20~+85℃ -30~-20℃ -20~+85℃ Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 8 Duplexer DATE Part Number D5DA942M5K2S2 Version 2.1bbE Jan.29, 2016 Final Table 1-2. Electrical Specification Item Tx to Rx Isolation Condition (MHz) 882.4~912.6 880.24～914.76 927.4~957.6 925.24～959.76 Terminating Impedance Specification Device size (L max. x W max. x H max.) dB(*2) dB dB dB(*2) dB dB dB -20~+85℃ 50 // 22nH 50 50 // 8.2nH Ω Single-ended Single-ended Single-ended -30 to +85 ℃ Max 55 48 55 55 40 45 53 58 58 58 56 - Operating Temperature DC impedance to ground Remarks Typ Tx port Rx port Ant port Maximum DC in all ports Unit Min - - Ω Ω VDC Device only 100 MΩ Device only 1.8 x 1.4 x 0.6 mm (*2) Integrated over +/-1.92MHz around the WCDMA channel center frequency 5 -30~+25℃ -20~+85℃ -30~-20℃ -20~+0℃ +0~+85℃ Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 8 Duplexer DATE Part Number D5DA942M5K2S2 Version 2.1bbE Jan.29, 2016 Final Dimensions 0.6max. max <7> <5> <6> <8> index <1> <5> <4> <2> <6> <7> <4> <3> <3> < Top View > < Side View > <8> <2> <1> < Bottom View > Unit: mm Pin assignment Pin No. Pin name Description 1 Rx Receiver 2 GND Ground 3 Tx Transmitter 4 GND Ground 5 GND Ground 6 ANT Antenna 7 GND Ground 8 GND Ground Figure 1. Dimensions and Pin assignment Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 8 Duplexer DATE Part Number D5DA942M5K2S2 Version 2.1bbE Jan.29, 2016 Final Evaluation Circuit Ant (50Ω) L=8.2nH (Q=∞) 6 Rx (50Ω) Tx (50Ω) 2,4, 1 5,7,8 3 L=22nH (Q=∞) GND Figure 2. 1~8 : Pin No. Evaluation Circuit Recommended foot print pattern Common GND External appearance in Chip carrier :Pad pattern :Resist pattern Figure 3. Recommended foot print pattern Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 8 Duplexer DATE Part Number D5DA942M5K2S2 Version 2.1bbE Tx to Ant Ant to Rx Figure 4-1. Electrical Characteristics These data exclude loss that comes from the test board. Jan.29, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 8 Duplexer DATE Part Number D5DA942M5K2S2 Version 2.1bbE Tx to Ant, Ant to Rx Tx to Rx Isolation Figure 4-2. Electrical Characteristics These data exclude loss that comes from the test board. Jan.29, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 8 Duplexer DATE Part Number D5DA942M5K2S2 Version 2.1bbE Tx Port Figure 4-3. Electrical Characteristics Jan.29, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 8 Duplexer DATE Part Number D5DA942M5K2S2 Version 2.1bbE Rx Port Figure 4-4. Electrical Characteristics Jan.29, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 8 Duplexer DATE Part Number D5DA942M5K2S2 Version 2.1bbE Ant Port Figure 4-5. Electrical Characteristics Jan.29, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 8 Duplexer DATE Part Number D5DA942M5K2S2 Version 2.1bbE Tx to Ant (Wide span) Ant to Rx (Wide span) Figure 4-6. Electrical Characteristics Jan.29, 2016 Final Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 8 Duplexer DATE Part Number D5DA942M5K2S2 Version 2.1bbE Jan.29, 2016 Final Ordering Code Ordering Code Packing Reel size Status D5DA942M5K2S2-Z Tape & Reel 3,000 pcs. MP D5DA942M5K2S2-ZA Tape & Reel less than 3,000 pcs. MP D5DA942M5K2S2-Y Tape & Reel 15,000 pcs. MP D5DA942M5K2S2-YA Tape & Reel less than 15,000 pcs. MP D5DA942M5K2S2-Q Bulk few pcs. MP *Minimum order quantity (MOQ) is assigned for each inquiry, Please contact to Sales Representatives. *MP: Mass Production Notice All of the contents specified herein are subject to change without notice due to technical improvements, etc. Please contact Taiyo Yuden Co., Ltd. for further details of product specifications. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. This product is for general electronics equipment such as Audio-Visual equipment, household electronics, office supplies, information services and telecommunications; therefore, in case this product is used for any medical equipment, space equipment, nuclear equipment or disaster prevention equipment, please contact Taiyo Yuden in advance. In case this product is used for general electronics equipment or circuits which require high safety and high reliability, thoroughly evaluate on safety and add a protection circuit if necessary.