Vishay MAL218097705E3 Conductive polymer aluminum capacitors smd (chip), low impedance Datasheet

180 CPS
www.vishay.com
Vishay BCcomponents
Conductive Polymer Aluminum Capacitors
SMD (Chip), Low Impedance
FEATURES
• Useful life: up to 2500 h at 105 °C
• Very low ESR and highest ripple current
• SMD-version with base plate, lead (Pb)-free
reflow solderable
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
180 CPS
105 °C
longer
lifetime
181 CPL
105 °C
APPLICATIONS
• SMD technology, for high temperature reflow soldering
Fig. 1
• Industrial and professional applications
QUICK REFERENCE DATA
DESCRIPTION
Nominal case sizes 
(L x W x H in mm)
Rated capacitance range, CR
Tolerance on CR
Rated voltage range, UR
Category temperature range
• Telecommunications and IT
VALUE
22 μF to 2700 μF
± 20 %
2.5 V to 35 V
-55 °C to +105 °C
Endurance test at 105 °C
2000 h
Useful life at 105 °C
2500 h
Shelf life at 0 V, 105 °C
1000 h
Based on sectional
specification
Climatic category IEC 60068
Revision: 20-May-15
• Portable and mobile equipment
5.3 x 5.3 x 5.7
to 10.4 x 10.4 x 12.6
IEC 60384-18 / CECC 32300
55/105/56
MARKING
• Rated capacitance (in μF)
• Rated voltage (in V)
• Date code, in accordance with IEC 60062
• Blue mark or “-” sign indicating the cathode (the anode is
identified by bevelled edges)
• Code indicating group number (S)
PACKAGING
Supplied in blister tape on reel
Document Number: 28415
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
180 CPS
www.vishay.com
Vishay BCcomponents
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm)
UR (V)
CR
(μF)
22
2.5

4.0

6.3

39



56
68
82
100












120
150
180
220
270
330
390
20

25

35
6.6 x 6.6 x 5.9
-
-
-


-

10.4 x 10.4 x
7.7

10.4 x 10.4 x
12.6
8.4 x 8.4 x 12
-
-

-
-
-



10.4 x 10.4 x
12.6
-
-
8.4 x 8.4 x 12
10.4 x 10.4 x
7.7
-
-
-
-
-

10.4 x 10.4 x
12.6
-
-
-
-
-
-
-
-
-
6.6 x 6.6 x 5.9 6.6 x 6.6 x 7.7 8.4 x 8.4 x 6.7


680
6.6 x 6.6 x 5.9 8.4 x 8.4 x 6.7
6.6 x 6.6 x 7.7 8.4 x 8.4 x 12
8.4 x 8.4 x 6.7
-
820
8.4 x 8.4 x 12

1000

10.4 x 10.4 x
7.7
1200
10.4 x 10.4 x
7.7
8.4 x 8.4 x 12
1500
16

5.3 x 5.3 x 5.7

6.6 x 6.6 x 5.9


5.3 x 5.3 x 5.7 6.6 x 6.6 x 5.9



6.6 x 6.6 x 5.9
6.6 x 6.6 x 5.9

8.4 x 8.4 x 12
10.4 x 10.4 x


5.3 x 5.3 x 5.7 6.6 x 6.6 x 5.9

6.6 x 6.6 x 5.9

12.6

5.3 x 5.3 x 5.7

6.6 x 6.6 x 7.7 8.4 x 8.4 x 6.7
5.3 x 5.3 x 5.7





8.4 x 8.4 x 12
10.4 x 10.4 x


6.6 x 6.6 x 5.9

7.7

6.6 x 6.6 x 5.9


8.4 x 8.4 x 12
6.6 x 6.6 x 5.9
10.4 x 10.4 x
10.4 x 10.4 x


6.6 x 6.6 x 5.9

12.6
12.6
6.6 x 6.6 x 7.7
470
560
10

8.4 x 8.4 x 12 8.4 x 8.4 x 12
-
-
-
-
-
-
10.4 x 10.4 x
12.6
-
-
-
-
-

10.4 x 10.4 x
12.6
-
-
-
-
-
-
2700
10.4 x 10.4 x
12.6
-
-
-
-
-
-
-
HMAX.
MAX. 0.3
Negative
polarity
A2
S
470
6.3V
A2
10
16S
Negative
polarity
2-pin:
Ø 8 mm to 10 mm
min. 0.4 / max. 1.0 (2 x)
2-pin:
≤ Ø 6.3 mm
D
WMAX.
S
HMAX.
MAX. 0.3
D
WMAX.
B
L1MAX.
min. 0.4 / max. 1.0 (2 x)
2200
B
LMAX.
L1MAX.
S
LMAX.
Fig. 2 - Dimensional outline
Revision: 20-May-15
Document Number: 28415
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
180 CPS
www.vishay.com
Vishay BCcomponents
Table 1
DIMENSIONS in millimeters AND MASS
NOMINAL
CASE SIZE
LxWxH
CASE
CODE
LMAX.
WMAX.
HMAX.
ØD
BMAX.
S
L1MAX.
MASS
(g)
5.3 x 5.3 x 5.7
0506
5.5
5.5
6.0
5.0
0.8
1.5
6.1
~ 0.15
6.6 x 6.6 x 5.9
0606
6.8
6.8
6.0
6.3
0.8
2.0
7.4
~ 0.25
6.6 x 6.6 x 7.7
0608
6.8
6.8
8.0
6.3
0.8
2.0
7.4
~ 0.4
8.4 x 8.4 x 6.7
0807
8.6
8.6
7.0
8.0
1.1
3.1
9.2
~ 0.5
8.4 x 8.4 x 12
0812
8.6
8.6
12.5
8.0
1.1
3.1
9.2
~ 0.8
10.4 x 10.4 x 7.7
1008
10.6
10.6
8.0
10
1.3
4.7
11.2
~ 0.9
10.4 x 10.4 x 12.6
1013
10.6
10.6
12.7
10
1.3
4.7
11.2
~ 1.3
Table 2
TAPE AND REEL DIMENSIONS in millimeters, PACKAGING QUANTITIES
NOMINAL
CASE SIZE
LxWxH
CASE
CODE
PITCH
P1
TAPE WIDTH
W
TAPE
THICKNESS
T2
REEL DIAMETER
PACKAGING
QUANTITY
PER REEL
5.3 x 5.3 x 5.7
0506
12
12
6.2
380
1000
6.6 x 6.6 x 5.9
0606
12
16
6.2
380
1000
6.6 x 6.6 x 7.7
0608
12
16
8.3
380
1000
8.4 x 8.4 x 6.7
0807
12
16
6.8
380
1000
8.4 x 8.4 x 12
0812
16
16
13.0
380
400
10.4 x 10.4 x 7.7
1008
16
24
10.0
380
500
10.4 x 10.4 x 12.6
1013
16
24
14.0
380
400
MOUNTING
SOLDERING
The capacitors are designed for automatic placement on to
printed-circuit boards.
Soldering conditions are defined by the curve, temperature
versus time, where the temperature is that measured on the
component during processing.
Optimum dimensions of soldering pads depend amongst
others on soldering method, mounting accuracy, print
layout and / or adjacent components.
For maximum conditions refer to Fig. 4.
Any temperature versus time curve which does not exceed
the specified maximum curves may be applied.
For recommended soldering pad dimensions, refer to Fig. 3
and Table 3.
As a general principle, temperature and duration shall be the
minimum necessary required to ensure good soldering
connections. However, the specified maximum curves
should never be exceeded.
b
a
c
a
Fig. 3 - Recommended soldering pad dimensions
Revision: 20-May-15
Document Number: 28415
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
180 CPS
www.vishay.com
Vishay BCcomponents
Table 3
RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters
CASE CODE
a
b
c
0506
1.4
3.0
1.6
0606
1.9
3.5
1.6
0608
1.9
3.5
1.6
0807
3.0
3.5
2.5
0812
3.0
3.5
2.5
1008
4.0
4.0
2.5
1013
4.0
4.0
2.5
ADVANCED SOLDERING PROFILE FOR LEAD (Pb)-FREE REFLOW PROCESS
T (°C)
TPeak
230
217
t4
t3
200
190
t2
150
t1
25
time (s)
Fig. 4 - Maximum temperature load during reflow soldering
Table 4
REFLOW SOLDERING CONDITIONS for MAL2180xxxE3
PROFILE FEATURES
Max. time from 25 °C to TPeak
CASE CODE
0506 TO 1013
300 s
Max. ramp-up rate to 150 °C
3 K/s
Max. time from 150 °C to 200 °C (t1)
150 s
Max. time from 190 °C to 200 °C (t2)
Ramp up rate from 200 °C to TPeak
Max. time above TLiquidus (217 °C) (t3)
Max. time above 230 °C (t4)
Peak temperature TPeak
Max. time above TPeak minus 5 °C
Ramp-down rate from TLiquidus
110 s
0.5 K/s to 3 K/s
90 s
70 s
260 °C
40 s
3 K/s to 6 K/s
Note
• Temperature measuring point on top of the case and on terminals.
Revision: 20-May-15
Document Number: 28415
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
180 CPS
www.vishay.com
Vishay BCcomponents
ORDERING EXAMPLE
ELECTRICAL DATA
SYMBOL
Conductive polymer 180 CPS series
DESCRIPTION
CR
Rated capacitance at 100 Hz, tolerance ± 20 %
IR
Rated RMS ripple current at 100 kHz, 105 °C
IL2
Max. leakage current after 2 min at UR
tan 
Max. dissipation factor at 100 Hz
Z
Max. impedance at 100 kHz
100 μF / 16 V; ± 20 %
Nominal case size: 6.6 mm x 6.6 mm x 5.9 mm; taped on
reel
Ordering code: MAL218097504E3
Note
• Unless otherwise specified, all electrical values in Table 5 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %
Table 5
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
2.5
4
6.3
10
CR
(μF)
NOMINAL
CASE SIZE
LxWxH
(mm)
IR
105 °C
100 kHz
(mA)
IL2
2 min
(μA)
tan 
100 Hz
Z
100 kHz
20 °C
()
ORDERING CODE
MAL2180...
180
5.3 x 5.3 x 5.7
2800
300
0.12
0.019
97251E3
390
6.6 x 6.6 x 5.9
3160
300
0.12
0.014
97253E3
560
6.6 x 6.6 x 5.9
3500
300
0.12
0.016
97254E3
560
6.6 x 6.6 x 7.7
4200
420
0.12
0.009
97255E3
680
8.4 x 8.4 x 6.7
3370
500
0.12
0.020
97256E3
820
8.4 x 8.4 x 12
5380
500
0.12
0.009
97257E3
1200
10.4 x 10.4 x 7.7
4450
600
0.15
0.013
97258E3
1500
8.4 x 8.4 x 12
5150
750
0.12
0.012
97259E3
2700
10.4 x 10.4 x 12.6
5600
1350
0.15
0.009
97261E3
150
5.3 x 5.3 x 5.7
2730
300
0.12
0.020
97701E3
270
6.6 x 6.6 x 5.9
3160
300
0.12
0.015
97702E3
330
6.6 x 6.6 x 5.9
3160
300
0.12
0.015
97703E3
390
6.6 x 6.6 x 7.7
4200
468
0.12
0.009
97704E3
560
8.4 x 8.4 x 6.7
3220
500
0.12
0.022
97705E3
560
8.4 x 8.4 x 12
5380
500
0.15
0.009
97706E3
1000
10.4 x 10.4 x 7.7
4300
800
0.12
0.014
97707E3
1200
8.4 x 8.4 x 12
4700
960
0.15
0.012
97708E3
1500
8.4 x 8.4 x 12
4700
1200
0.15
0.012
97709E3
2200
10.4 x 10.4 x 12.6
5700
1760
0.15
0.009
97711E3
120
5.3 x 5.3 x 5.7
2660
300
0.12
0.021
97301E3
220
6.6 x 6.6 x 5.9
3160
300
0.12
0.015
97303E3
330
6.6 x 6.6 x 5.9
3390
415
0.12
0.017
97304E3
330
6.6 x 6.6 x 7.7
4200
623
0.12
0.009
97305E3
390
8.4 x 8.4 x 6.7
3220
491
0.12
0.022
97306E3
820
8.4 x 8.4 x 12
4700
1033
0.15
0.013
97307E3
820
10.4 x 10.4 x 7.7
4300
1033
0.12
0.014
97308E3
1500
10.4 x 10.4 x 12.6
5560
1890
0.15
0.010
97309E3
68
5.3 x 5.3 x 5.7
2540
300
0.12
0.023
97401E3
120
6.6 x 6.6 x 5.9
2600
300
0.12
0.022
97402E3
150
6.6 x 6.6 x 7.7
2800
450
0.12
0.015
97403E3
270
8.4 x 8.4 x 6.7
3220
500
0.12
0.022
97404E3
470
10.4 x 10.4 x 7.7
3800
940
0.12
0.019
97405E3
Revision: 20-May-15
Document Number: 28415
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
180 CPS
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
16
20
25
35
CR
(μF)
NOMINAL
CASE SIZE
LxWxH
(mm)
IR
105 °C
100 kHz
(mA)
IL2
2 min
(μA)
tan 
100 Hz
Z
100 kHz
20 °C
()
ORDERING CODE
MAL2180...
39
5.3 x 5.3 x 5.7
2350
300
0.12
0.020
97501E3
39
6.6 x 6.6 x 5.9
2460
300
0.12
0.024
97502E3
68
6.6 x 6.6 x 5.9
2440
300
0.12
0.025
97503E3
100
6.6 x 6.6 x 5.9
2490
320
0.12
0.024
97504E3
150
8.4 x 8.4 x 6.7
3220
500
0.12
0.022
97505E3
220
10.4 x 10.4 x 7.7
3450
704
0.12
0.022
97506E3
270
8.4 x 8.4 x 12
4850
864
0.15
0.012
97507E3
330
10.4 x 10.4 x 12.6
5300
1056
0.15
0.012
97508E3
470
10.4 x 10.4 x 12.6
6100
1504
0.15
0.010
97509E3
820
10.4 x 10.4 x 12.6
5400
2624
0.12
0.012
97511E3
120
6.6 x 6.6 x 5.9
3200
480
0.12
0.025
97201E3
390
8.4 x 8.4 x 12
4950
1560
0.12
0.014
97202E3
560
10.4 x 10.4 x 12.6
5600
2240
0.12
0.012
97203E3
56
6.6 x 6.6 x 5.9
2800
280
0.12
0.030
97601E3
180
8.4 x 8.4 x 12
4650
900
0.12
0.016
97602E3
330
10.4 x 10.4 x 12.6
5000
1650
0.12
0.014
97603E3
22
6.6 x 6.6 x 5.9
2600
154
0.12
0.035
97001E3
82
8.4 x 8.4 x 12
4000
574
0.12
0.020
97002E3
120
10.4 x 10.4 x 12.6
4400
840
0.12
0.018
97003E3
Table 6
ADDITIONAL ELECTRICAL DATA
PARAMETER
CONDITIONS
VALUE
IEC 60384-18, subclause 4.14
Us  1.15 x UR
IEC 60384-18, subclause 4.16; TA  105 °C
Urev  1 V
Voltage
Surge voltage for short periods
Reverse voltage for short periods
USEFUL LIFE AND ENDURANCE
Table 7
ENDURANCE TEST AND USEFUL LIFE
SERIES
CASE CODE
USEFUL LIFE
AT 105 °C (h)
ENDURANCE
AT 105 °C (h)
ENDURANCE
AT 95 °C (h)
ENDURANCE
AT 85 °C (h)
ENDURANCE
AT 75 °C (h)
180 CPS
0506 - 1013
2500
2000
6000
20 000
63 000
Endurance can be calculated by formula below:
L r = L 0 x 10
T0 - Tr
----------------20
Lr: estimated lifetime (h)
L0: base lifetime specified at maximum operating temperature with applied the DC voltage (h)
T0: rated maximum operating temperature (°C)
Tr: actual ambient temperature (°C)
Revision: 20-May-15
Document Number: 28415
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
180 CPS
www.vishay.com
Vishay BCcomponents
Table 8
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
REFERENCE
PROCEDURE
(quick reference)
REQUIREMENTS
Mounting
IEC 60384-18,
subclause 4.3
Shall be performed prior to tests mentioned below;
reflow soldering;
for maximum temperature load
refer to chapter “Mounting”
C/C: ± 5 %
tan   spec. limit
IL2  spec. limit
Endurance
IEC 60384-18 /
CECC 32300,
subclause 4.15
Tamb = 105 °C; UR applied;
for test duration see Table 7
C/C: ± 20 %
tan   2 x spec. limit
IL2  spec. limit
Useful life
CECC 30301,
subclause 1.8.1
Tamb = 105 °C; UR and IR applied;
for test duration see Table 7
C/C: ± 30 %
tan   3 x spec. limit
IL2  spec. limit
Shelf life
(storage at high
temperature)
IEC 60384-18 /
CECC 32300,
subclause 4.17
Tamb = 105 °C; no voltage applied;
1000 h
after test: UR to be applied for 30 min,
24 h to 48 h before measurement
For requirements
see “Endurance test” above
Revision: 20-May-15
Document Number: 28415
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Similar pages