LITEON LTW-5630AZL40 Led middle power Datasheet

LED Middle POWER
5630AZLxx Series
LED Middle POWER
5630 Product Data Sheet
AZLxx Series
Created Date:
Revision: 7,
03 / 01 / 2013
06 / 06 / 2014
1
BNC-OD-C131/A4
Created Date : 05/26/2007
Revison : 1.01, 05/26/2008
LED Middle POWER
5630AZLxx Series
1. Description
The LiteON 5630 Product series is a wide beam angle standard-dimension package, combining the lifetime and reliability
advantages of Light Emitting Diodes with the brightness of conventional lighting. It gives you total design freedom and
unmatched brightness, creating a new opportunities for solid state lighting to displace conventional lighting technologies.
1.1 Features






Package in 8mm tape on 7" diameter reels.
Compatible with automatic placement equipment.
Compatible with infrared and vapor phase reflow solder process.
EIA STD package.
I.C. compatible.
Meet green product and Pb-free(According to RoHS)
1.2 Available Part Numbers
CCT
Part Number
6500K
LTW-5630AZL65
5700K
LTW-5630AZL57
5000K
LTW-5630AZL50
4000K
LTW-5630AZL40
3500K
LTW-5630AZL35
3000K
LTW-5630AZL30
2700K
LTW-5630AZL27
02
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
2. Outline Dimensions
Part No.
Lens Color
Source Color
LTW-5630AZL65
LTW-5630AZL57
LTW-5630AZL50
LTW-5630AZL40
Orange
InGaN Blue
LTW-5630AZL35
LTW-5630AZL30
LTW-5630AZL27
Notes:
1. All dimensions are in millimeters.
2. Tolerance is ±0.2 mm (.008") unless otherwise noted.
03
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
3. Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Rating
Unit
Code4
Po
700
mW
Continuous Forward Current
IF
200
mA
Pulse Forward Current
IFP
260
mA
Operating Temperature Range
Pulse Forward Current
Storage Temperature Range
Topr
-40 ~ +85
°C
Tstg
-40 ~ +100
°C
Tj
≦120
°C
Power Dissipation
Junction Temperature
Notes :
1. 1/10 duty cycle, Pulse width ≤100μs.
2. Forbid to operating at reverse voltage condition for long.
3. It is recommended to follow de-rating curve to use maximum rating to ensure LED can operated normally.
04
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
4. Electro-Optical Characteristics
4.1 Typical Performance
Test
Parameter
Symbol
Values
Unit
Condition
Correlated Color Temp.
CCT
Typ.
2700
3000
3500
4000
5000
5700
6500
Chromaticity
x
Typ.
0.458
0.434
0.408
0.382 0.345
0.329 0.312
Coordinates
y
Typ.
0.410
0.403
0.392
0.380 0.355
0.342 0.328
Min
41.0
42.5
44.0
44.0
45.5
44.0
42.5
Typ.
50
53
54
55
54
55
53
Max.
59.0
60.5
62.0
62.0
63.5
62.0
60.5
133
141
144
146
144
146
141
‘K
-
Luminous Flux
1
Φv
lm
Optical Efficiency
ηopt
Typ.
Color Rendering Index
CRI
Min.
80
-
Viewing Angle
2θ1/2
Typ.
120
deg
Min
2.9
Typ.
3.13
Max.
3.3
Rjt
Typ.
15
°C/W
ESD
Min
5K
HBM
lm/W
IF = 120mA
Forward Voltage
VF
Thermal Resistance
ESD-Withstand Voltage
V
V
Notes
1. Luminous flux is the total luminous flux output as measured with an integrating sphere.
2. Iv (flux v) classification code is marked on each packing bag.
3. The chromaticity coordinates (x, y) is derived from the 1931 CIE chromaticity diagram.
4. Caution in ESD:
Static Electricity and surge damages the LED. It is recommended using a wrist band or anti-electrostatic
glove when handling the LED. All devices, equipment and machinery must be properly grounded.
5. CAS140B is the test standard for the chromaticity coordinates (x, y) & v.
6. The chromaticity coordinates (x, y) guarantee should be added +/- 0.01 tolerances
7. CRI measurement allowance is ±5
8. The thermal resistance is defined
as the figure, Rjt is the Rth from Tj to thermal pad solder:
Reference for thermal resistance:
Using 2.5x 2.5x 0.17 cm aluminum MCPCB,
Rjt=15°C/W, Rjs=19 °C/W
05
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
4.2 Forward Current vs. Lumen and Voltage
Lumen (lm)
Current
VF
(mA)
(V)
2700K
3000K
3500K
4000K
5000K
5700K
6500K
20
2.76
9.2
9.8
10.0
10.2
10.0
10.1
9.9
40
2.85
18.1
19.3
19.7
20.0
19.7
20.0
19.3
60
2.93
26.6
28.3
28.8
29.3
28.8
29.2
28.2
80
3.00
34.5
36.9
37.5
38.1
37.4
38.1
36.9
100
3.06
42.4
45.1
45.9
46.7
45.9
46.7
45.0
120
3.13
50.0
53.0
54.0
55.0
54.0
55.0
53.0
140
3.19
57.0
60.5
61.6
62.9
61.7
62.8
60.6
160
3.25
64.0
68.0
69.2
70.4
69.3
70.4
68.0
180
3.31
70.4
74.9
76.2
77.7
76.3
77.6
74.9
200
3.36
76.3
81.2
82.7
84.2
82.7
84.0
81.2
06
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
4.3 Relative Spectral Power Distribution at Typical Current
3000K
5000K
25degC
25degC
85degC
85degC
4.4 Radiation Characteristics
0°
100%
90%
30°
Relative Intensity (%)
80%
70%
60%
60°
50%
40%
30%
20%
10%
0%
90°
60
30°
0°
50
07
100
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
4.5 Forward Current vs. Forward Voltage
4.6 Forward Current Derating Curve vs. Ambient Temperature
4.7 Relative Intensity vs. Junction Temperature
08
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
4.8 Forward Voltage vs. Junction Temperature
09
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
5. Binning Definition
5.1 Color Bin
6500K
5700K
010
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
5000K
4000K
011
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
3500K
3000K
012
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
2700K
013
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
5.2 Color Rank
6500K
Rank
-
x
y
1
0.3048
2
-
x
y
0.3209
1
0.3145
0.3028
0.3304
2
3
0.3117
0.3393
3
K1
Rank
(IF = 120 mA)
Rank
-
x
y
0.3187
1
0.3098
0.3200
0.3138
0.3238
2
0.3081
0.3299
0.3177
0.3277
3
0.3166
0.3384
4
0.3177
0.3277
-
x
y
K3
K5
4
0.3124
0.3341
4
0.3172
0.3330
5
0.3081
0.3299
5
0.3213
0.3371
6
0.3089
0.3249
6
0.3221
0.3261
1
0.3068
0.3113
1
0.3117
0.3393
2
0.3048
0.3209
2
0.3205
0.3481
3
0.3089
0.3249
3
0.3213
0.3371
K2
K4
4
0.3098
0.3200
4
0.3172
0.3330
5
0.3138
0.3238
5
0.3166
0.3384
6
0.3145
0.3187
6
0.3124
0.3341
Tolerance on each Hue bin (x,y) is +/- 0.01.
5700K
Rank
-
x
y
1
0.3215
2
-
x
y
0.3353
1
0.3294
0.3306
1
0.3256
0.3331
0.3207
0.3462
2
0.3293
0.3364
2
0.3251
0.3444
3
0.3292
0.3539
3
0.3331
0.3398
3
0.3333
0.3518
4
0.3331
0.3398
J1
Rank
(IF = 120 mA)
Rank
J3
J5
4
0.3292
0.3481
4
0.3332
0.3458
5
0.3251
0.3444
5
0.3371
0.3493
6
0.3254
0.3388
6
0.3366
0.3369
1
0.3222
0.3243
1
0.3292
0.3539
2
0.3215
0.3353
2
0.3376
0.3616
3
0.3254
0.3388
3
0.3371
0.3493
J2
J4
4
0.3256
0.3331
4
0.3332
0.3458
5
0.3293
0.3364
5
0.3333
0.3518
6
0.3294
0.3306
6
0.3292
0.3481
Tolerance on each Hue bin (x,y) is +/- 0.01.
014
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
5000K
Rank
-
x
y
1
0.3371
2
-
x
y
0.3493
1
0.3441
0.3376
0.3616
2
3
0.3464
0.3688
3
H1
Rank
(IF = 120 mA)
Rank
-
x
y
0.3428
1
0.3407
0.3462
0.3446
0.3493
2
0.3416
0.3589
0.3485
0.3524
3
0.3500
0.3657
4
0.3485
0.3524
-
x
y
H3
H5
4
0.3458
0.3623
4
0.3493
0.3591
5
0.3416
0.3589
5
0.3533
0.3624
6
0.3412
0.3525
6
0.3515
0.3487
1
0.3366
0.3369
1
0.3464
0.3688
2
0.3371
0.3493
2
0.3551
0.3760
3
0.3412
0.3525
3
0.3533
0.3624
H2
H4
4
0.3407
0.3462
4
0.3493
0.3591
5
0.3446
0.3493
5
0.3500
0.3657
6
0.3441
0.3428
6
0.3458
0.3623
Tolerance on each Hue bin (x,y) is +/- 0.01.
4000K
Rank
-
x
y
1
0.3703
2
-
x
y
0.3726
1
0.3784
0.3647
1
0.3746
0.3689
0.3736
0.3874
2
0.3806
0.3725
2
0.3784
0.3841
3
0.3871
0.3959
3
0.3865
0.3762
3
0.3914
0.3922
4
0.3865
0.3762
G1
Rank
(IF = 120 mA)
Rank
G3
G5
4
0.3849
0.3881
4
0.3890
0.3842
5
0.3784
0.3841
5
0.3952
0.3880
6
0.3766
0.3765
6
0.3898
0.3716
1
0.3670
0.3578
1
0.3871
0.3959
2
0.3703
0.3726
2
0.4006
0.4044
3
0.3766
0.3765
3
0.3952
0.3880
G2
G4
4
0.3746
0.3689
4
0.3890
0.3842
5
0.3806
0.3725
5
0.3914
0.3922
6
0.3784
0.3647
6
0.3849
0.3881
Tolerance on each Hue bin (x,y) is +/- 0.01.
015
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
3500K
Rank
-
x
y
1
0.3943
2
-
x
y
0.3853
1
0.4018
0.3996
0.4015
2
3
0.4148
0.4090
3
F1
Rank
(IF = 120 mA)
Rank
-
x
y
0.3752
1
0.3983
0.3804
0.4050
0.3837
2
0.4042
0.3970
0.4118
0.3869
3
0.4188
0.4041
4
0.4118
0.3869
-
x
y
F3
F5
4
0.4115
0.4006
4
0.4153
0.3955
5
0.4042
0.3970
5
0.4223
0.3990
6
0.4013
0.3887
6
0.4147
0.3814
1
0.3889
0.3690
1
0.4148
0.4090
2
0.3943
0.3853
2
0.4299
0.4165
3
0.4013
0.3887
3
0.4223
0.3990
F2
F4
4
0.3983
0.3804
4
0.4153
0.3955
5
0.4050
0.3837
5
0.4188
0.4041
6
0.4018
0.3752
6
0.4115
0.4006
Tolerance on each Hue bin (x,y) is +/- 0.01.
3000K
Rank
-
x
y
1
0.4223
2
-
x
y
0.3990
1
0.4260
0.3854
1
0.4244
0.3923
0.4299
0.4165
2
0.4303
0.3943
2
0.4324
0.4100
3
0.4431
0.4213
3
0.4361
0.3964
3
0.4451
0.4146
4
0.4361
0.3964
E1
Rank
(IF = 120 mA)
E3
E5
4
0.4388
0.4123
4
0.4406
0.4055
5
0.4324
0.4100
5
0.4468
0.4077
6
0.4284
0.4011
6
0.4373
0.3893
1
0.4147
0.3814
1
0.4431
0.4213
2
0.4223
0.3990
2
0.4562
0.4260
3
0.4284
0.4011
3
0.4468
0.4077
E2
Rank
E4
4
0.4244
0.3923
4
0.4406
0.4055
5
0.4303
0.3943
5
0.4451
0.4146
6
0.4260
0.3854
6
0.4388
0.4123
Tolerance on each Hue bin (x,y) is +/- 0.01.
016
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
2700K
Rank
-
x
y
1
0.4468
2
-
x
y
0.4077
1
0.4483
0.4562
0.4260
2
3
0.4688
0.4290
3
D1
Rank
(IF = 120 mA)
Rank
-
x
y
0.3919
1
0.4477
0.3998
0.4534
0.4011
2
0.4576
0.4183
0.4591
0.4025
3
0.4697
0.4211
4
0.4591
0.4025
D3
D5
4
0.4636
0.4197
4
0.4644
0.4118
5
0.4576
0.4183
5
0.4703
0.4132
6
0.4527
0.4090
6
0.4593
0.3944
1
0.4373
0.3893
1
0.4688
0.4290
2
0.4468
0.4077
2
0.4813
0.4319
3
0.4527
0.4090
3
0.4703
0.4132
D2
D4
4
0.4477
0.3998
4
0.4644
0.4118
5
0.4534
0.4011
5
0.4697
0.4211
6
0.4483
0.3919
6
0.4636
0.4197
Tolerance on each Hue bin (x,y) is +/- 0.01.
017
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
5.3 Flux Bin
2700K
 v Bin
 v Luminous Flux Spec. Table
Lumen (lm) at IF = 120 mA
Min
Max
CF
41.0
45.5
FI
45.5
IL
LO
3000K
 v Bin
EH
44.0
48.5
50.0
HK
48.5
53.0
50.0
54.5
KN
53.0
57.5
54.5
59.0
NQ
57.5
62.0
 v Luminous Flux Spec. Table
Lumen (lm) at IF = 120 mA
DG
42.5
47.0
GJ
47.0
JM
MP
5000K
 v Bin
 v Luminous Flux Spec. Table
Lumen (lm) at IF = 120 mA
Min
Max
FI
45.5
50.0
51.5
IL
50.0
54.5
51.5
56.0
LO
54.5
59.0
56.0
60.5
OR
59.0
63.5
 v Luminous Flux Spec. Table
Lumen (lm) at IF = 120 mA
Min
Max
EH
44.0
48.5
HK
48.5
KN
NQ
5700K
 v Bin
 v Luminous Flux Spec. Table
Lumen (lm) at IF = 120 mA
Min
Max
EH
44.0
48.5
53.0
HK
48.5
53.0
53.0
57.5
KN
53.0
57.5
57.5
62.0
NQ
57.5
62.0


Lumen (lm) at IF = 120 mA
Max
Max
 v Bin
 v Bin
 v Luminous Flux Spec. Table
Min
Min
3500K
4000K
6500K
 v Bin
 v Luminous Flux Spec. Table
Lumen (lm) at IF = 120 mA
Min
Max
DG
42.5
47.0
GJ
47.0
51.5
JM
51.5
56.0
MP
56.0
60.5
Tolerance on each Luminous Flux bin is +/- 10%.
018
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
I F =120 mA
Code
lm
C
41.0
D
42.5
E
44.0
F
45.5
G
47.0
H
48.5
I
50.0
J
51.5
K
53.0
L
54.5
M
56.0
N
57.5
O
59.0
P
60.5
Q
62.0
R
63.5
CCT
2700K
3000K
3500K
4000K
EH
EH
5000K
5700K
6500K
CF
DG
DG
FI
EH
FI
GJ
GJ
HK
HK
IL
HK
IL
JM
JM
KN
KN
LO
KN
LO
MP
MP
NQ
NQ
NQ
OR
019
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
5.4 Voltage Bin
VF Spec. Table
Forward Voltage (volts) at IF = 120mA
VF Bin
Min
Max
V1
2.9
3.1
V2
3.1
3.2
V3
3.2
3.3
Tolerance on each Forward Voltage bin is +/- 0.1V
6. Bin Code List
※ Notes: Full Rank on Label
Example: V1 / HK / G5
Forward Voltage Rank
Luminous Flux Rank
Color Rank
V1
HK
G5
020
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
7. Reflow Soldering Characteristics
Profile Feature
Lead Free Assembly
Average Ramp-Up Rate (TSmax to TP)
3°C / second max
Preheat Temperature Min (TSmin)
150°C
Preheat Temperature Max (TSmax)
200°C
Preheat Time (tSmin to tSmax)
60 – 180 seconds
Time Maintained Above Temperature (TL)
217°C
Time Maintained Above Time (tL)
60 – 150 seconds
Peak / Classification Temperature (TP)
260°C
Time Within 5°C of Actual Peak Temperature (tP)
5 seconds
Ramp – Down Rate
6°C / second max
Time 25°C to Peak Temperature
8 minutes max
Notes:
1.
The LEDs can be soldered using the reflow soldering or hand soldering method. The recommended hand
soldering condition is 350 °C max. and 2 secs max. for one time only, and the recommended reflow soldering
condition is 260 °C max. and 5 secs max. for three times max.
2.
All temperatures refer to topside of the package, measured on the package body surface.
021
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
3.
The soldering condition referring to J-STD-020B. The storage ambient for the LEDs should not exceed 30 °C
temperature or 70% relative humidity. It is recommended that LEDs out of their original packaging are
soldered within one week. For extended storage out of their original packaging, it is recommended that the
LEDs were stored in a sealed container with appropriate desiccant, or desiccators with nitrogen ambient. If
the LEDs were unpacked more than 168hrs, baking the LEDs at 60 ℃ for 24hrs before soldering process.
4.
The soldering profile could be further referred to different soldering grease material characteristic. The
grease vendor will provide this information.
5.
A rapid-rate process is not recommended for the LEDs cooling down from the peak temperature.
6.
Although the recommended reflow conditions are specified above, the reflow or hand soldering
condition at the lowest possible temperature is desirable for the LEDs.
7.
LiteOn cannot make a guarantee on the LEDs which have been already assembled using the dip
soldering method.
022
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
8. Reliability Test
No
1
2
3
4
5
Test item
Test Condition
Steady State Operating Life of
High Temperature (HTOL)
Steady State Operating Life of
High Temperature (HTOL)
Steady State Operating Life of
High Temperature (HTOL)
Steady State Operating Life of
High Temperature (HTOL)
Steady State Operating Life of
Low Temperature (LTOL)
Duration
Number of
Damaged
Ts=55℃, IF=120mA
1000 hrs
0/20
Ts=85℃, IF=120mA
1000 hrs
0/20
Ts=55℃, IF=180mA
1000 hrs
0/20
Ts=85℃, IF=180mA
1000 hrs
0/20
Ta=-40℃, IF=120mA
1000 hrs
0/20
500 hrs
0/20
Pulse Wet Operating Life of
60℃/90%RH, IF=120mA
High Temperature (PWHTOL)
30mins ON/30min OFF
7
High Temperature Storage (HTS)
100℃
1000 hrs
0/20
8
Low Temperature Storage (LTS)
-40℃
1000 hrs
0/20
9
Thermal Cycle (TC)
200 cycle
0/20
10
Thermal Shock (TS)
200 cycle
0/20
11
Solder Resistance (SR)
265℃, 3X MSL
5sec
0/20
12
Solder Ability (SA)
245℃5sec, 95% coverage
5sec
0/11
13
Mechanical Shock (MS)
1500G 0.5msec pulse shock
14
Random Vibration (RV)
6G RMS, 10-2000Hz, 10min
Variable Vibration Frequency
10-2000-10Hz, log or linear sweep rate, 20G
(VVF)
for 1 min, 1.5mm each apply 3x per axis
Salt Spread (SS)
35℃, 30g/m /day
6
15
16
-40℃~100℃
30min dwell 5min transfer
-40℃~100℃
20min dwell 20sec transfer
each 6
0/6
axis
2
per axis
0/6
over 6hrs
0/6
48hrs
0/11
Criteria for Judging the Damage
Criteria for Judgment
Item
Symbol
Test Condition
Min.
Forward Voltage
VF
IF=Typical Current
Luminous Flux
lm
IF=Typical Current
CCX&CCY
x,y
IF=Typical Current
Max.
U.S.L. x 1.1
L.S.L. x 0.7
Shift<0.02
023
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
9. User Guide

Cleaning
Do not use unspecified chemical liquid to clean LED they could harm the package. If cleaning is necessary,
immerse the LED in ethyl alcohol or isopropyl alcohol at normal temperature for less than one minute.

Recommend Printed Circuit Board Attachment Pad
Infrared / vapor phase
Reflow Soldering

Package Dimensions of Tape
Note: All dimensions are in millimeters (inches).
024
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series

Package Dimensions of Reel
Notes:
1. Empty component pockets sealed with top cover tape.
2. 7 inch reel-3000 pieces per reel.
3. Minimum packing quantity is 500 pieces for remainders.
4. The maximum number of consecutive missing lamps is two.
5. In accordance with EIA-481-1-B specifications.
025
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
10. Cautions
10.1 Application
The LEDs described here are intended to be used for ordinary electronic equipment (such as office
equipment, communication equipment and household applications).Consult Liteon’s Sales in advance for
information on applications in which exceptional reliability is required, particularly when the failure or
malfunction of the LEDs may directly jeopardize life or health (such as in aviation, transportation, traffic
control equipment, medical and life support systems and safety devices).
10.2 Storage
This product is qualified as Moisture sensitive Level 3 per JEDEC J-STD-020 Precaution when handing
this moisture sensitive product is important to ensure the reliability of the product.
The package is sealed:
The LEDs should be stored at 30°C or less and 90%RH or less. And the LEDs are limited to use
within one year, while the LEDs is packed in moisture-proof package with the desiccants inside.
The package is opened:
The LEDs should be stored at 30°C or less and 60%RH or less. Moreover, the LEDs are limited to
solder process within 168hrs. If exceeding the storage limiting time since opened, that we
recommended to baking LEDs at 60°C at least 24hrs. To seal the remainder LEDs return to package,
it’s recommended to be with workable desiccants in original package.
10.3 Cleaning
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary.
10.4 Drive Mode
An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs
connected in parallel in an application, it is recommended that a current limiting resistor be
incorporated in the drive circuit, in series with each LED as shown in Circuit A below
Circuit model A
Circuit model B
026
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
(A) Recommended circuit.
(B) The brightness of each LED might appear different due to the differences in the I-V characteristics
of those LEDs.
10.5 ESD (Electrostatic Discharge)
Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage:
Use of a conductive wrist band or anti-electrostatic glove when handling these LEDs.
All devices, equipment, and machinery must be properly grounded.
Work tables, storage racks, etc. should be properly grounded.
Use ion blower to neutralize the static charge which might have built up on surface of the
LED’s plastic lens as a result of friction between LEDs during storage and handling.
ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, low
forward voltage, or “no lightup” at low currents.To verify for ESD damage, check for “light up” and VF of
the suspect LEDs at low currents.The VF of “good” LEDs should be >[email protected] for InGaN product
and >[email protected] for AlInGaP product.
10.6 Suggested Checking List:
Training and Certification
1. Everyone working in a static-safe area is ESD-certified?
2. Training records kept and re-certification dates monitored?
Static-Safe Workstation & Work Areas
1. Static-safe workstation or work-areas have ESD signs?
2. All surfaces and objects at all static-safe workstation and within 1 ft measure less
than 100V?
3. All ionizer activated, positioned towards the units?
4. Each work surface mats grounding is good?
Personnel Grounding
1. Every person (including visitors) handling ESD sensitive (ESDS) items wear wrist strap,
heel strap or conductive shoes with conductive flooring?
2. If conductive footwear used, conductive flooring also present where operator stand
or walk?
027
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
LED Middle POWER
5630AZLxx Series
3. Garments, hairs or anything closer than 1 ft to ESD items measure less than 100V*?
4. Every wrist strap or heel strap/conductive shoes checked daily and result recorded for
all DLs?
5. All wrist strap or heel strap checkers calibration up to date?
Note: *50V for Blue LED.
Device Handling
1. Every ESDS items identified by EIA-471 labels on item or packaging?
2. All ESDS items completely inside properly closed static-shielding containers when
not at static-safe workstation?
3. No static charge generators (e.g. plastics) inside shielding containers with ESDS items?
4. All flexible conductive and dissipative package materials inspected before reuse
or recycle?
Others
1. Audit result reported to entity ESD control coordinator?
2. Corrective action from previous audits completed?
3. Are audit records complete and on file?
10.7 Others:
Do not put any pressure on the light emitting surface either by finger or any hand tool and do
not stack the products. Stress or pressure may cause damage to the wires of the LED array.
This product is not designed for the use under any of the following conditions, please confirm
the performance and reliability are well enough if you use it under any of the following
conditions
Do not use sulfur-containing materials in commercial products including the materials such as
seals and adhesives that may contain sulfur.
Do not put this product in a place with a lot of moisture (over 85% relative humidity), dew
condensation, briny air, and corrosive gas (Cl, H2S, NH3, SO2, NOX, etc.), exposure to a
corrosive environment may affect silver plating.
The appearance and specifications of the product may be modified for improvement without
prior notice.
028
BNC-OD-C131/A4
Created Date: 03/01/2013
Revision:
7, 06/06/2014
Similar pages