ILLUMINATION LUXEON Z ES Extreme flux density in a micro footprint package for precise optical control LUXEON Z ES is a high power 1.6mm x 2.0mm LED that enables never before seen color consistency, luminance, flux density and design flexibility for lighting solutions. LUXEON Z ES is undomed, a feature that provides unmatched optical flexibility for precise beam angle control. Tested and binned at application conditions, 85°C, LUXEON Z ES emitters are an ideal choice for indoor and outdoor light sources requiring superior beam angles, higher efficacy and lower costs. FEATURES AND BENEFITS PRIMARY APPLICATIONS Micro footprint enables close packaging Architectural Undomed design allows precise optical control Downlights 3- and 5-step MacAdam ellipse: Freedom from Binning enabling color consistency Lamps LM-80 test report available Outdoor Spotlights RoHS DS134 LUXEON Z ES Product Datasheet ©2018 Lumileds Holding B.V. All rights reserved. No. E352519 COMPLIANT Table of Contents General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Peak Wavelength Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Soldering Reflow Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved. i General Product Information Product Test Conditions LUXEON Z ES LEDs are tested and binned with a DC drive current of 700mA at a junction temperature, Tj, of 85°C. Part Number Nomenclature Part numbers for LUXEON Z ES follow the convention below: L X Z A – B C D E – F Where: A – designates voltage (2=3V) B C – designates nominal ANSI CCT or color (22=2200K, 27=2700K, 30=3000K, 35=3500K, 40=4000K, 50=5000K, 57=5700K, 65=6500K, PR=Royal Blue) D E – designates minimum CRI (70=70CRI, 7T=70CRI Typical, 80=80CRI, 90=90CRI, 02=Royal Blue) F designates white color space definition (3=3 SDCM and 5=5 SDCM, not used for Royal Blue) – Therefore, the following part number is used for a LUXEON Z ES White 3V, 3000K 80CRI, which is binned within a 3-step MacAdam ellipse: L X Z 2 – 3 0 8 0 – 3 Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Z ES is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved. 2 Performance Characteristics Product Selection Guide Table 1a. Product performance for LUXEON Z ES White 3V at 700mA and 350mA, Tj=85°C. TYPICAL LUMINOUS EFFICACY (lm/W) TYPICAL LUMINOUS FLUX (lm) 260 133 143 150 LXZ2-4070 220 260 133 143 150 LXZ2-5070 70 220 270 138 149 156 LXZ2-5770 70 [3] 250 270 138 149 156 LXZ2-577T 70 220 270 138 149 156 LXZ2-6570 70 [3] 250 270 138 149 156 LXZ2-657T 80 140 188 96 103 109 LXZ2-2280-x 2700K 80 170 216 110 119 125 LXZ2-2780-x 3000K 80 180 230 117 127 133 LXZ2-3080-x 3500K 80 190 240 122 132 139 LXZ2-3580-x 4000K 80 190 248 127 136 144 LXZ2-4080-x 5000K 80 190 250 128 138 145 LXZ2-5080-x 2700K 90 140 180 92 99 104 LXZ2-2790-x 3000K 90 150 190 97 105 110 LXZ2-3090-x 3500K 90 150 197 101 108 114 LXZ2-3590-x 4000K 90 150 205 105 113 119 LXZ2-4090-x 5700K 90 170 215 110 118 124 LXZ2-5790-x LUMINOUS FLUX [1] (lm) NOMINAL CCT MINIMUM CRI [1] MINIMUM 4000K 70 220 5000K 70 5700K 5700K 6500K 6500K 2200K TYPICAL 700mA TYPICAL LUMINOUS EFFICACY (lm/W) PART NUMBER [2] 350mA Table 1b. Product performance of LUXEON Z ES Royal Blue at 700mA, Tj=85ºC. COLOR Royal Blue RADIOMETRIC POWER [1] (mW) MINIMUM TYPICAL 800 850 TYPICAL RADIANT EFFICIENCY (%) PART NUMBER 45% LXZ2-PR02 Notes for Tables 1a and 1b: 1. Lumileds maintains a tolerance of ±6.5% on both luminous flux and radiometric power and ±2 on CRI measurements. 2. In the part number the -x is the designation for the white color space requirement. On 80CRI and 90CRI versions 3 designates 3 SDCM and 5 designates 5 SDCM. For 70 CRI parts or lower, they will not have an SDCM designation and all parts are binned within a 5-step SDCM. 3. Typical CRI. DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved. 3 Optical Characteristics Table 2. Optical characteristics for LUXEON Z ES at 700mA. PART NUMBER TYPICAL TOTAL INCLUDED ANGLE [1] TYPICAL VIEWING ANGLE [2] LXZ2-xxxx 140° 116° LXZ2-xxxx-x 140° 116° LXZ2-PR02 140° 120° Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. Electrical and Thermal Characteristics Table 3. Electrical and thermal characteristics for LUXEON Z ES at 700mA. FORWARD VOLTAGE [1] (VF) MINIMUM TYPICAL MAXIMUM TYPICAL TEMPERATURE COEFFICIENT OF FORWARD VOLTAGE [2] (mV/°C) LXZ2-xxxx 2.5 2.8 3.25 -1.6 3 LXZ2-xxxx-x 2.5 2.8 3.25 -1.6 3 PART NUMBER TYPICAL THERMAL RESISTANCE—JUNCTION TO SOLDER PAD (°C/W) Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Measured between 25°C and 110°C. Absolute Maximum Ratings Table 4. Absolute maximum ratings for LUXEON Z ES. PARAMETER MAXIMUM PERFORMANCE DC Forward Current [1, 2] Peak Pulsed Forward Current LED Junction Temperature [1] 1200mA for LXZ2-xxxx [1, 3] 1350mA for LXZ2-xxxx (DC & Pulse) 135°C for LXZ2-xxxx ESD Sensitivity Class 3B Operating Case Temperature -40°C to 135°C LED Storage Temperature -40°C to 135°C Soldering Temperature JEDEC 020c 260°C Allowable Reflow Cycles 3 Reverse Voltage (Vreverse) [4, 5] LUXEON LEDs are not designed to be driven in reverse bias Notes for Table 4: 1. Proper current derating must be observed to maintain junction temperature below the maximum. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met: – The frequency of the ripple current is 100Hz or higher – The average current for each cycle does not exceed the maximum allowable DC forward current – The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current 3. Pulsed operation with the maximum peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%. 4. Transient reverse voltages and surge currents due to electrical switching or supply interruptions are acceptable if these events do not last for more than 10ms, the amplitude of the reverse voltage does not exceed 5V and the reverse current is less than 200uA. 5. A maximum 5V reverse voltage for up to 10s is an acceptable beginning of life, one time, test. DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved. 4 Characteristic Curves Spectral Power Distribution Characteristics Figure 1a. Typical normalized power vs. wavelength for LXZx-xxxx at test current, Tj=85ºC. Figure 1b. Typical normalized power vs. wavelength for LXZ2-PR02 at 700mA, Tj=85ºC. DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved. 5 Light Output Characteristics Figure 2a. Typical normalized light output vs. junction temperature for LXZx-xxxx, at test current. Figure 2b. Typical normalized light output vs. junction temperature for LXZ2-PR02, at test current. DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved. 6 Figure 3a. Typical normalized light output vs. forward current for LXZx-xxxx, Tj=85ºC. Figure 3b. Normalized radiant power vs. forward current for LXZ2-PR02, Tj=85ºC. DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved. 7 Forward Current Characteristics Figure 4a. Typical forward current vs. forward voltage for LXZx-xxxx, Tj=85ºC. Figure 4b. Typical forward current vs. forward voltage for LXZ2-PR02, Tj=85ºC. DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved. 8 Radiation Pattern Characteristics Figure 5a. Typical radiation pattern for LXZx-xxxx (white only) at test current, Tj=85°C. Figure 5b. Typical radiation pattern for LXZ2-PR02 at test current, Tj=85°C. DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved. 9 Figure 6a. Typical polar radiation pattern for LXZx-xxxx (white only) at test current, Tj=85°C. Figure 6b. Typical polar radiation pattern for LXZ2-PR02 at test current, Tj=85°C. DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved. 10 Product Bin and Labeling Definitions Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or dominant wavelength and forward voltage. LUXEON Z ES White LEDs are labeled using a 4-digit alphanumeric CAT code following the format below. A B C D A – designates luminous flux/radiometric power bin (example: L=200 to 210 lumens, M=210 to 220 lumens) B C – designates white color bins (example: 5A, 5B, 5C, 5D, 3U, 3L for 3000K parts) D designates forward voltage bin (example: X =2.65 to 2.85V, Y=2.85 to 3.00V) – Therefore, a LUXEON Z ES white LED with a lumen range of 200 to 210, color bin of 5D and a forward voltage range of 2.65 to 2.85V has the following CAT code: L 5 D X LUXEON Z ES Royal Blue LEDs are labeled using a 3-digit alphanumeric CAT code following the format below. A B C A – designates luminous flux/radiometric power bin (example: L=200 to 210 lumens, M=210 to 220 lumens) B – designates Royal Blue peak wavelength bins (example: 3 for peak wavelength of 440nm to 445nm) C – designates forward voltage bin (example: P=2.5 to 2.75V, R=2.75 to 3.00V) Therefore, a LUXEON Z ES Royal Blue with a radiometric power of 1000mW to 1050mW, peak wavelength bin of 3 and a forward voltage range of 2.5 to 2.75V has the following CAT code: Q 3 P DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved. 11 Luminous Flux Bins Table 5 lists the standard photometric luminous flux bins for LUXEON Z ES emitters. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 5. Luminous flux bin definitions for LUXEON Z ES, Tj=85°C. BIN LUMINOUS FLUX [1] (lm) MINIMUM MAXIMUM D 130 140 E 140 150 F 150 160 G 160 170 H 170 180 J 180 190 K 190 200 L 200 210 M 210 220 N 220 230 P 230 240 Q 240 250 R 250 260 S 260 270 T 270 280 U 280 290 Notes for Table 5: 1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. Radiometric Power Bins Table 6. Radiometric power bin definitions for LXZ2-PR02. BIN CODE RADIOMETRIC POWER [1] (mW) MINIMUM MAXIMUM L 800 850 M 850 900 N 900 950 P 950 1000 Q 1000 1050 R 1050 1100 S 1100 1150 Notes for Table 6: 1. Lumileds maintains a tolerance of ±6.5% on radiometric power measurements. DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved. 12 Color Bin Definitions The four lines segmenting the area between 3-Step and 5-step MAE have slope of ±1 when drawn in CIE 1976 color space, with these imaginary lines eminating from the MAE center Figure 7. Color space definition for LUXEON Z ES. Figure 8. 3- and 5-step MacAdam ellipse illustration for Table 7. Table 7. 3- and 5-step MacAdam ellipse color bin definitions for LUXEON Z ES. NOMINAL CCT COLOR SPACE [1] CENTER POINT [2] (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION 2200K Single 3-step MacAdam ellipse (0.5020, 0.4156) 0.00863 0.00398 49.27° 2700K Single 3-step MacAdam ellipse (0.4578, 0.4101) 0.00810 0.00420 53.70° 3000K Single 3-step MacAdam ellipse (0.4338, 0.4030) 0.00834 0.00408 53.20° 3500K Single 3-step MacAdam ellipse (0.4073, 0.3917) 0.00927 0.00414 54.0° 4000K Single 3-step MacAdam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.70° 5000K Single 3-step MacAdam ellipse (0.3447, 0.3553) 0.00822 0.00354 59.60° 2200K Single 5-step MacAdam ellipse (0.5020, 0.4156) 0.01438 0.00663 49.27° 2700K Single 5-step MacAdam ellipse (0.4578, 0.4101) 0.01350 0.00700 53.70° 3000K Single 5-step MacAdam ellipse (0.4338, 0.4030) 0.01390 0.00680 53.20° 3500K Single 5-step MacAdam ellipse (0.4073, 0.3917) 0.01545 0.00690 54.00° 4000K Single 5-step MacAdam ellipse (0.3818, 0.3797) 0.01565 0.00670 53.70° 5000K Single 5-step MacAdam ellipse (0.3447, 0.3553) 0.01370 0.00590 59.60° 5700K Single 5-step MacAdam ellipse (0.3287, 0.3417) 0.01243 0.00533 59.09° 6500K Single 5-step MacAdam ellipse (0.3123, 0.3282) 0.01115 0.00475 58.57° Notes for Table 7: 1. 3-step is available in 80CRI and 90CRI, and 5-step is available in 70CRI, 80CRI and 90CRI. 2. Lumileds maintains a tolerance of ±0.005 on x and y color coordinates in the CIE color space. Table 8. MacAdam ellipse color bin definitions for LXZ2-xxxx, Tj=85°C. BIN SDCM 30 3-step MacAdam ellipse (70CRI, 80CRI, 90CRI) 3U 3-step MacAdam ellipse (80, 90CRI) 3L 3-step MacAdam ellipse (80, 90CRI) 5A 5-step MacAdam ellipse (70, 80, 90CRI) 5B 5-step MacAdam ellipse (70, 80, 90CRI) 5C 5-step MacAdam ellipse (70, 80, 90CRI) 5D 5-step MacAdam ellipse (70, 80, 90CRI) DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved. 13 Forward Voltage Bins Table 9. Forward voltage bin definitions for LXZ2-xxxx. BIN FORWARD VOLTAGE [1] (VF) MINIMUM MAXIMUM P 2.50 2.75 R 2.75 3.00 S 3.00 3.25 X 2.65 2.85 Y 2.85 3.00 Notes for Table 9: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. Peak Wavelength Bins Table 10. Peak wavelength bins for LXZ2-PR02, 700mA, Tj=85°C. BIN PEAK WAVELENGTH [1] (nm) MINIMUM MAXIMUM 3 440 445 4 445 450 5 450 455 Notes for Table 10: 1. Lumileds maintains a tolerance of ±2nm on peak wavelength measurements. DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved. 14 Mechanical Dimensions Figure 9. Mechanical dimensions for LUXEON Z ES. Notes for Figure 9: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved. 15 Soldering Reflow Guidelines tp Tp Critical Zone TL to Tp Ramp-up TL Temperature tL Tsmax Tsmin Ramp-down ts Preheat Area 25 Time 25ºC to Peak JEDEC J-STD-020D Time Figure 10. Visualization of the acceptable reflow temperature profile as specified in Table 11. Table 11. Reflow profile characteristics for LUXEON Z ES. PROFILE FEATURE LEAD FREE ASSEMBLY Preheat Minimum Temperature (Tsmin) 150°C Preheat Maximum Temperature (Tsmax) 200°C Preheat Time (tsmin to tsmax) 60 to 120 seconds Ramp-Up Rate (TL to Tp) 3°C / second maximum Liquidus Temperature (TL) 217°C Time Maintained Above Temperature TL (tL) 60 to 150 seconds Peak / Classification Temperature (Tp) 260°C Time Within 5°C of Actual Temperature (tp) 20 to 40 seconds Ramp-Down Rate (Tp to TL) 6°C / second maximum Time 25°C to Peak Temperature 8 minutes maximum JEDEC Moisture Sensitivity Table 12. Moisture sensitivity levels for LUXEON Z ES. LEVEL 1 FLOOR LIFE SOAK REQUIREMENTS STANDARD TIME CONDITIONS TIME CONDITIONS Unlimited ≤30°C / 85% RH 168 Hours +5 / -0 85°C / 85% RH DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved. 16 Solder Pad Design Figure 11. Solder pad layout for LUXEON Z ES. Notes for Figure 11: 1. All dimensions are in millimeters. 2. The figure shows one of the LUXEON Z ES layouts for close-packing design on Printed Circuit Board (PCB). For more information on assembly and additional layouts, please refer to LUXEON Z ES Application Brief (AB120). 3. The *.dwg files are available at lumileds.com. DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved. 17 Packaging Information Pocket Tape Dimensions Figure 12. Tape dimensions for LUXEON Z ES. Notes for Figure 12: 1. Drawings are not to scale. 2. All dimensions are in millimeters. Reel Dimensions Figure 13. Reel dimensions for LUXEON Z ES. Notes for Figure 13: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS134 LUXEON Z ES Product Datasheet 20180314 ©2018 Lumileds Holding B.V. All rights reserved. 18 About Lumileds Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation, quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is making the world safer, better and more beautiful—with light. To learn more about our lighting solutions, visit lumileds.com. ©2018 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS134 LUXEON Z ES Product Datasheet 20180314 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. A listing of Lumileds product/ patent coverage may be accessed at lumileds.com/patents.