TT CHC-CH8ALF-02-1002-BD Precision ceramic ball grid array Datasheet

Precision Ceramic
Resistors
Ball Grid
Arrays
Precision Ceramic
Precision
Ceramic
HC-Precision
Series
Ball
Grid
Arrays
atio tolerances to ±0.05%
Ball Grid Arrays
bsolute tolerances to ±0.1%
CHC-Precision Series
oHS compliant terminations available
® tolerances to ±0.05%
Ratio
uperior TaNFilm
resistors on ceramic substrate
CHC-Precision Series
tolerances
to ±0.1%SOIC-N package
ame footprintAbsolute
as the industry
standard
• Ratio tolerances to ±0.05%
RoHS compliant
terminations
available
• Absolute
tolerances to
±0.1%
Superior
TaNFilm®
resistors
on
• RoHS compliant terminations availableceramic substrate
• Superior
TaNFilm® resistors
on ceramic
substrateSOIC-N package
Same footprint
as the industry
standard
• Same footprint as the industry standard SOIC-N package
C’s TaNFilm® ceramic Precision Ball Grid Array offers precision
a ceramic
BGA
All Pb-freetolerances
parts comply with in
EU Directive
2011/65/EU
(RoHS2)package.
®
dition, the TaNFilm CHC Series provides all the unique qualities of our other TaNFilm ® packa
nfigurations.
IRC’s TaNFilm® ceramic Precision Ball Grid Array offers precision tolerances in a ceramic BGA package. In
®
ecise state-of-the-art
laser® CHC
trimming
close
tolerances
and
tightother
ratios.
The
TaNFilm® proce
addition, the TaNFilm
Seriesprovides
provides all
the unique
qualities
of our
TaNFilm
package
confi
ables IRC
togurations.
manufacture custom circuit configurations and multiple resistance values without sacrificing
®
Precise
trimming provides
close tolerances
and tight
The TaNFilm
htest tolerance state-of-the-art
and trackinglaser
characteristics
of precision
networks.
Theratios.
Tantalum
Nitride process
resistor materia
enables IRC to manufacture custom circuit configurations and multiple resistance values without sacrificing the
f-passivating
environmental
surpassing
military The
requirements
andresistor
guaranteeing
tightestfor
tolerance
and trackingprotection
characteristics
of precision networks.
Tantalum Nitride
material is exceptio
io stability.
self-passivating for environmental protection surpassing military requirements and guaranteeing exceptional
ratio stability.
r applications
requiring a high degree of reliability, stability, accuracy and low noise, plus the advantages
For
applications
requiring
a high
degree
reliability, stability,
accuracy
and low
noise, plus the advantages of
w resistor configurations,
specify
the
IRCofPrecision
Ceramic
Ball Grid
Arrays.
new resistor configurations, specify the IRC Precision Ceramic Ball Grid Arrays.
Electrical
lectrical
DataData
ackage
Power Rating at 70°C
Package
Power Rating
at 70°C
Element
Network
Element
8-Pad
8-Pad
Network
100mW
100mW
16-Pad
16-Pad
Temperature Range
100mW
Noise
Maximum Voltage
Substrate
Noise
-55°C to +150°C
800mW
50V
(not to exceed √ PxR)
-55°C to +150°C
< -25dB
50V
(not to exceed √ PxR)
Termination
Substrate
400mW
400mW
100mW
Maximum Voltage
Temperature Range
99.5%
Alumina
< -25dB
Solder
plated over
nickel barrier
99.5%
Alumina
800mW
Terminati
Solder
plated ov
nickel barr
Manufacturing Capabilities
Resistance
Range
Available
Absolute Tolerances
Available Ratio Tolerances
(Ratio to R1)
Best
Absolute TCR
Tracking TCR
(Track to R1)
GFD
±100ppm/°C
±20ppm/°C
Available Ratio
Tolerances
GFDC
(Ratio to R1)
±50ppm/°C
±10ppm/°C
JGFDCB
GFDCB
±25ppm/°C
±5ppm/°C
JGFDCB
GFDCBA
±25ppm/°C
±5ppm/°C
anufacturing
Capabilities
10Ω - 25Ω
JGFDC
Resistance25.1Ω - 50Ω Available
JGFDC
Range
Absolute Tolerances
10Ω - 25Ω
50.1Ω - 200Ω
201Ω - 100KΩ
25.1Ω - 50Ω
JGFDC
JGFDC
GFD
GFDC
General Note
IRC reserves the right to make changes in product specification without notice or liability.
General Note
All information is subject to IRC’s own data and is considered accurate at time of going to print.
50.1Ω - 200Ω
J right
G Fto make
D Cchanges
B in product specification withoutGnotice
FD
CB
TT Electronics reserves the
or liability.
©
Advanced
FilmtoDivision
• 4222own
Southdata
Staples
Street
• Corpus Christi
Texas 78411
USAof going to print.
AllIRC
information
is subject
TT Electronics’
and
is considered
accurate
at time
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
© TT Electronics plcJ G F D C B
01Ω - 100KΩ
GFDCBA
Best
Absolute TCR
±100ppm/°C
±50ppm/°C
Tracking TCR
(Track to R1)
±20ppm/°C
±10ppm/°C
BI±25ppm/°C
Technologies IRC Welwyn
A subsidiary
of
±5ppm/°C
TT electronics plc
CHC-Precision
Series Issue May 2009 Sheet 1 of 3
www.ttelectronics.com/resistors
±25ppm/°C
±5ppm/°C
07.14
Precision Ceramic
Ball
Grid
CHC-Precision
Series Arrays
Precision Ceramic
Ball Grid Arrays
Physical and Schematic Data
(View from top)
(View from bottom)
0.058″
±0.005
A1
L
0.025″
±0.010
0.025″
±0.003
0.050″
±0.010
E*
99.6%
Alumina
Substrate
0.250″
±0.003
0.200″
±0.010
A
1
2
N
0.030″ ±0.002
10/90 Sn/Pb solder balls
Number of Columns N
Length L
4
0.200″ ±0.003
8
0.400″ ±0.003
Schematic CH4A
(View from top)
Schematic CH8A
(View from top)
*Rows B, C and D not populated
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
CHC-Precision Series Issue May 2009 Sheet 2 of 3
BI Technologies IRC Welwyn
www.ttelectronics.com/resistors
© TT Electronics plc
07.14
Precision Ceramic
Ball Grid
CHC-Precision
Series Arrays
Precision Ceramic
Ball Grid Arrays
Environmental Data
Maximum
ΔR
Typical
ΔR
Thermal Shock And
Power Conditioning
±0.1%
±0.02%
Low Temperature
Operation
±0.05%
100
% Of Rated P ower
Environmental Test Per
MIL-PRF-83401
Power Derating Curve
±0.02%
50
10
Short-time Overload
±0.05%
±0.02%
Moisture Resistance
±0.1%
±0.03%
25°
±0.1%
±0.03%
150°
Ordering Data
Prefix
Shock
70°
Temperature in °C
CHC -
CH8A
-
03
-
1002
-
B
B
Model
CH4A = 8-pad with 10/90 Sn/Pb terminations
CH4ALF = 8-pad with RoHS compliant
SnAgCu terminations
Vibration
±0.1%
±0.03%
Life
±0.1%
±0.03%
TCR Code
High Temperature
Exposure
±0.1%
±0.03%
Resistor Code
Low Temperature
Storage
±0.05%
CH8A = 16-pad with 10/90 Sn/Pb terminations
CH8ALF = 16-pad with RoHS compliant
SnAgCu terminations
01 = ±100 ppm/°C Commercial Grade
02 = ±50 ppm/°C Commercial Grade
03 = ±25 ppm/°C Commercial Grade
4-digit resistance code
Example: 1002 = 10KΩ; 49R9 = 49.9Ω
±0.01%
Absolute Tolerance Code
J = ±5%; G = ±2%; F = ±1%; D = ±0.5%; C = ±0.25%; B = ±0.1%
Optional R1 Ratio Tolerance Code
F = ±1%; D = ±0.5%; B = ±0.1%; A = ±0.05%
For additional information or to discuss your specific requirements.
please contact our Applications Team using the contact details below.
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
CHC-Precision Series Issue May 2009 Sheet 3 of 3
BI Technologies IRC Welwyn
www.ttelectronics.com/resistors
© TT Electronics plc
07.14
Similar pages