Willow DG86-6021-98-1024-NIL High current automotive relay Datasheet

DG86 series
high current automotive relay
• Limiting continuous current up to 200A
• IP67 Sealed
• Screw Clamp Terminals for contacts
• Shrouded coil terminals
(fits Yazaki® connector)
• RoHS Compliant
Contacts
Contact number & arrangement
SPST-NO
Contact material
AgNi + W (Tungsten pre-contact)
Max. switching voltage
DC 27V
Min. switching current / voltage
Rated load (13.5VDC resistive at 23°C)
DC1 200A (5.5hrs continuous max. time with 25sqmm cable size)
Rated load (24VDC resistive at 23°C)
DC1 100A
Max. switching current (resistive)
13.5VDC 300A (3mins max.) / 400A (40secs max.) / 700A (5sec)
24VDC 120A
Initial resistance
≤50mΩ (1A/24VDC)
Coil
Rated voltage
DC 12, 24V
Must release voltage
≥0.125Un
Operating range of supply voltage
See coil table 1
Rated power consumption
DC 3.6W
Insulation
Insulation resistance
10MΩ at 500VDC, 25°C, 50%RH
Dielectric strength
coil to contact 500Vrms, 1min
contact to contact 500Vrms, 1min
General Data
Operating time
mS 15mS max (excluding bounce, without coil suppresion)
Release time
mS 10mS max (excluding bounce, without coil suppresion)
Electrical Life
ops 1 x 105
Mechanical life
ops 1 x 106
Dimensions
Weight
L x W x H 73 x 43.8 x 43.8 mm (including bracket and terminals - see Fig.1)
Approx. 100g
Ambient temperature
storage -40 to 100°C
operating -40 to 85°C
Shock resistance
Functional: 6mS, 10g
Vibration resistance
10Hz - 500Hz, 10g
Page 1 of 2
Ref: DG86 050713JHM
www.aecsensors.com
Sales Department Tel: (888) 847-6552
DG86 series
high current automotive relay
Coil Data
Table 1
Nominal Voltage
(VDC)
Coil Voltage Code
Must Operate
Voltage Max.
(VDC)
Coil Resistance (Ω)
±10%
Parallel Resistor
(optional)
± 10% (Ω)
Must Release
voltage min. (VDC)
1012
12
40
9.6
4.5 - 1.5
560
1024
24
160
19.2
9.0 - 3.0
2200
* At ambient temperature of 85’C, maximum allowable voltage should be reduced by 28%
Ordering codes
Contact
material
Type
D
G
8
6
-
6
Contact
arrangement
0
2
1
Cover protection and
mounting
-
9
8
Coil code
-
-
Contact material
60
-
Options
See Coil Table 1
AgNi with W pre-leading
Contact arrangement
21
-
SPST-NO (1N/O, 1 Form A)
Cover protection category
9
-
IP67 cover with mounting bracket
Connection mode
8
-
Screw Terminals (M6) for contacts, shrouded blades for coil
Parallel Component Options
Nil
-
No option
R
-
Resistor (see Table 1 for values)
D
-
Diode (+85 / -86) (1N4007)
DR
-
Diode reversed (-85 / + 86) (1N4007)
Overall Dimensions
Fig. 1
30
87
30
2 x M6 Bolt supplied
Torque 6.5Nm Max
85
86
Dimensions in mm
Notes:
1: All parameters, unless otherwise specified, are measured at ambient temperature of 23ºC.
Specifications are subject to change without notice. E&OE.
Page 2 of 2
Ref: DG86 050713JHM
www.aecsensors.com
Sales Department Tel: (888) 847-6552
85
86
87
Similar pages