TT CB0565A Excellent high frequency performance Datasheet

Resistors
Make Possible
Ceramic Ball Grid
Termination Arrays
Ceramic Ball Grid
Ceramic
Ball Grid
CHC
Series
Termination
Arrays
Superior TaNFilm® resistors
on ceramic substrate
Termination
Arrays
High density networks on a reduced footprint
High
purity alumina
substrate
Excellent
CHC
Series high frequency performance
®
• Superior
TaNFilm
resistors
on ceramic substrate
Standard
tolerances
to ±1%
• Superior TaNFilm® resistors on ceramic substrate
• High
density
networks
on
a
reduced
footprint
RoHS
compliant
terminations
• High
density
networks
on a reduced available
footprint
• Excellent high frequency performance
• Excellent high frequency performance
Standard tolerances
tolerancesto
to±1%
±1%
•• Standard
•• RoHS
RoHS compliant
compliantterminations
terminationsavailable
available
Ball grid
terminations
CHC Series
High
High purity alumina
puritysubstrate
alumina
substrate
Ball grid
Ball grid
terminations
terminations
All Pb-free parts comply with EU Directive 2011/65/EU (RoHS2)
IRC’s Chipscale
terminal
Chipscale on
onceramic
ceramicCHC
CHCoffers
offershigh
highperformance
performance
terminal
solutions
solutions in
in aa small
smallsurface
surfacemount
mountpackage.
package.Sn/Pb
Sn/Pbsolder
solderballs
balls
placed
and
placed on
on aa ceramic
ceramicsubstrate
substratepermit
permitvery
verylow
lowparasitic
parasiticinductance
inductance
and
capacitance.
and
reduces
ground
bounce.
IRC’s
proven
capacitance.This
Thisimproves
improvesspeeds,
speeds,lowers
lowerspropagation
propagationdelays,
delays,
and
reduces
ground
bounce.
IRC’s
proven
tantalum
nitride
thin
film
technology
can
handle
the
most
demanding
applications.
tantalum nitride thin film technology can handle the most demanding applications.
For all of your high density, small footprint termination needs, use IRC’s CHC Termination arrays.
For all of your high density, small footprint termination needs, use IRC’s CHC Termination arrays.
Electrical Data
Electrical Data
Package
Package
CB0565A
CB0565A
CB0565B
CB0565B
CD0865A
CD0865A
CD0865B
CD0865B
CD1065A
CD1065A
CD1065B
CD1065B
CC0910A
CC0910B
CC0910A
CD0910A
CC0910B
CD0910B
CD0910A
Resistance
Range
(Ω)
Resistance
Absolute
Tolerances
Absolute
10Rtoto10.0K
4.7K
10R
±1%,
±5%±2%
Range
(Ω)
10R
to 4.7K
to 2.2K
10.0K
10R to
10R
10Rtoto4.7K
2.2K
10R
10Rtoto4.7K
4.7K
10R to 10.0K
10R to 4.7K
Tolerances
±1%,
±2%
±1%,±5%
±2%
±5%±2%
±1%,
±5%
±1%,
±2%
±1%, ±2%
10R to 4.7K
±5%
10R to 2.2K
±5%
±1%, ±2%
10R to 4.7K
±1%, ±2%
10R to 10.0K
±5%
10R to 4.7K
10R to 4.7K
10R to 2.2K
±1%, ±2%
±1%, ±2%
±5%
±5%
10Rtoto4.7K
2.2K
10R
±1%,±2%
±2%
±1%,
10Rtoto10.0K
4.7K
10R
±5%
±5%
10R
10Rtoto2.2K
4.7K
±1%,
±1%,±2%
±2%
10R
10R to
to 4.7K
10.0K
±5%
±5%
10R
10Rtoto4.7K
2.2K
±1%,
±1%,±2%
±2%
10R to 10.0K
±5%
10R to 2.2K
±1%, ±2%
10R to 4.7K
±5%
10R to 4.7K
10R to 10.0K
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±5%
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
±100ppm/°C
Rating 70°C*
Temperature
0.6W
0.6W
1.2W
1.2W
1.6W
1.6W
0.1W
-40°C to +85°C
0.1W
-40°C to +85°C
1.2W
1.2W
1.2W
±1%, ±2%
±5%
*Rated power is from 0°C to 70°C derated linearly to 0W at 85°C.
±100ppm/°C
CD0910B
General
Note
Rating 70°C*
±5%
10R to
to 4.7K
10.0K
10R
10R to 4.7K
Absolute TCR
Package Power Element Power
Operating
Rating
70°C*
70°C*
Package
Power Rating
Element
Power Temperature
Operating
±1%,±5%
±2%
10R to 2.2K
10R to 10.0K
Absolute TCR
10R to 2.2K
±1%, ±2%
10R to 4.7K
±5%
1.2W
IRC reserves the right to make changes in product specification without notice or liability.
General
All informationNote
is subject to IRC’s own data and is considered accurate at time of going to print.
TT Electronics
reservesis
thefrom
right to0°C
maketo
changes
in product
specification
without
notice
liability.
*Rated
power
70°C
derated
linearly
to 0W
ator85°C.
© IRC Advanced
Film
Division • 4222
South Staples Street • Corpus Christi Texas 78411 USA
All
information
subject
to TT 361
Electronics’
data
and is considered accurate at time of going to print.
Telephone:
361 992is7900
• Facsimile:
992 3377 •own
Website:
www.irctt.com
A subsidiary of
TT electronics plc
CHC Series Issue April 2011 Sheet 1 of 4
www.ttelectronicsresistors.com
General Note
©
Electronics
IRCTT
reserves
the right to plc
make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print.
07.14
A subsidiary of
TT electronics plc
Ceramic Ball Grid
Ceramic
Ball Grid
Termination Arrays
Termination
Arrays
CHC Series
Make Possible
Return Loss Data (50Ω Nominal)
Average return loss for 0.65mm pitched bussed schematic for elements away from reference pins.
For example: CB0565B, reference pins are A3 or B3
Average return loss for 1mm pitc hed bussed schematic respect to reference pin.
Where reference pins are B1 to B9 referring to CC0910B schematic.
0
5
5
10
10
15
15
M a g n it u d e ( - d B )
M a g n it u d e ( - d B )
0
20
25
30
35
20
25
30
35
40
40
45
45
50
50
0
5
10
15
20
25
30
35
0
40
2
4
6
Frequency (GHz)
Typical Return Loss For CC0910B-01-50R0-F
8
10
Frequency (GHz )
14
12
16
18
20
Typical Return Loss For CD1065B-01-50R0-F
Eye Diagram Data
Ideal Terminator
IRC CHC-CC0910B-01-50R0-F Terminator
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
0
zs1
zs1
Impedance Response Data
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
0
Time, nsec
Ideal 50 Terminator
Impedance response to 100psec rising edge
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
Time, nsec
0.8
0.9
1.0
1.1
1.2
IRC CHC-CC0910B-01-50R0-F Terminator
Impedance response to 100psec rising edge
CHC Series Issue April 2011 Sheet 2 of 4
www.ttelectronicsresistors.com
© TT Electronics plc
07.14
Ceramic Ball Grid
Termination
Arrays
CHC Series
Ceramic Ball Grid
Termination Arrays
Make Possible
Environmental Data
Environmental Test
Specification
Typical
Maximum
Thermal shock
MIL-PRF-83401
±0.01%
±0.02%
Low temperature operation
MIL-PRF-83401
±0.01%
±0.05%
Short time overload
MIL-PRF-83401
±0.01%
±0.05%
High temperature exposure
MIL-PRF-83401
±0.03%
±0.05%
Effects of solder
MIL-PRF-83401
±0.01%
±0.05%
MIL-STD-202, Method 206
65°C, 45% RH, with bias
±0.02%
±0.01%
MIL-PRF-83401
±0.01%
±0.02%
Moisture resistance
Life
Physical Data and Schematic Diagrams for 1.0mm Pitch Series
A
A
B
B
C
C
0.64mm ±0.05 diameter
solder bumps
9.00mm
±0.15mm
1.00mm
±0.25mm
1.00mm
±0.25mm
4.0mm
±0.15mm
D
D
1
2
3
4
5
6
7
8
1
9
CD0910A isolated schematic
(view from top)
2
3
4
5
6
7
8
9
1
CD0910B bussed schematic
(view from top)
A
A
B
B
C
2
3
0.50mm
±0.25mm
4
5
6
7
8
9
0.63m m
±0.1mm
1.27m m
±0.16mm
0.64mm ±0.05 diameter
solder bump s
9.00m m
±0.15mm
1.00m m
±0.25mm
1.00m m
±0.25mm
3.0m m
±0.15mm
C
1
2
3
4
5
6
7
8
9
CC0910A isolated schematic
(view from top)
1
2
3
4
5
6
7
8
9
CC0910B bussed schematic
(view from top)
1
2
3
4
5
6
7
8
0.50mm
±0.25mm
9
1.27m m
±0.16m m
0.63m m
±0.1mm
Note: Contact A1 indicator marked with dot on top of part. Coplanarity between solder bumps 0.06mm.
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
CHC Series Issue April 2011 Sheet 3 of 4
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
www.ttelectronicsresistors.com
© TT Electronics plc
07.14
Ceramic Ball Grid
Ceramic
Ball Grid
Termination Arrays
Termination
Arrays
CHC Series
Make Possible
Physical Data and Schematic Diagrams for 0.65mm Pitch Series
A
6.4m m
±0.1m m
A
0.35mm diameter
solder bump s
0.65mm
B
B
C
C
0
5
D
D
2
3
4
5
6
7
8
9
10
1
CD1065A isolated schematic
(view from top)
2
3
4
5
6
7
8
9
D
B
B
A
10
A
2
3
4
5
B
C
C
7
6
8
9
10
0.64m m
±0.1m m
0.275mm ±0.1m m
20
0.38 mm
±0.1m m
25
30
35
5.1m m
±0.1m m
40
0.35mm diameter
solder bump s
0.65mm
45
B
2.5mm
±0.1m m
A
1
15
CD1065B bussed schematic
(view from top)
A
10
M a g n it u d e ( - d B )
1
D
Average return loss for 0.65mm pitched bussed schematic for elements0.65
away
mmfrom reference pins.
C CB0565B, reference pins are A3 or B3
For example:
C
50
0
2
D
4
6
8
10
14
0.65mm
12
Frequency (GHz )
C
16
18
20
2.5mm
±0.1m m
B
A
D
D
1
2
3
4
5
6
7
8
CD0865A isolated schematic
(view from top)
1
2
3
4
5
6
7
8
1
2
4
3
5
7
6
8
0.643mm
±0.1m m
0.275mm ±0.1m m
CD0865B bussed schematic
(view from top)
0.381mm
±0.1m m
3.2mm
±0.1mm
A
A
B
B
0.35mm diameter
solder bump s
0.65mm
B
1
2
3
4
5
CB0565A isolated schematic
(view from top)
CB0565B bussed schematic
(view from top)
0.65mm
A
1
2
3
4
5
0.275mm ±0.1mm
1.2mm
±0.1mm
0.64m m
±0.1mm
0.38mm
±0.1mm
Note: Contact A1 indicator marked with dot on top of part. Coplanarity between solder bumps 0.06mm.
Ordering Data
Prefix
CHC - CD0865
A - 01 - 51R1 - J
Model
CB0565 = 2 × 5, 0.65mm pitch array
CD0865 = 4 × 8, 0.65mm pitch array
CD1065 = 4 × 10, 0.65mm pitch array
CC0910 = 3 × 9, 1.0mm pitch array
CD0910 = 4 × 9, 1.0mm pitch array
Schematic
A = Isolated schematic with 60/40 Sn/Pb (0.65mm pitch) or 90/10 Pb/Sn (1.0mm pitch) terminations
ALF = Isolated schematic with RoHS compliant terminations
B = Bussed schematic with 60/40 Sn/Pb (0.65mm pitch) or 90/10 Pb/Sn (1.0mm pitch) terminations
BLF = Bussed schematic with RoHS compliant terminations
Absolute TCR Code
01 = ±100ppm/°C
Four Digit Resistance Code
Standard resistance values
10R0 = 10Ω; 15R0 = 15Ω; 22R0 = 22Ω; 33R0 = 33Ω; 47R0 = 47Ω; 50R0 = 50Ω; 51R1 = 51.1Ω;
75R0 = 75Ω; 1000 = 100Ω; 1001 = 1.00KΩ; 1002 = 10.0KΩ; 2201 = 2.20KΩ; 4701 = 4.70KΩ
Absolute Tolerance Code
J = ±5%; G = ±2%; F = ±1%
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
CHC Series Issue April 2011 Sheet 4 of 4
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
www.ttelectronicsresistors.com
© TT Electronics plc
07.14
Similar pages