150~200W Constant Current Mode LED Driver
F
110
M
(for DA-Type only)
■ Features
Constant Current mode output
Metal housing design with functional Ground
Built-in active PFC function
No load / Standby power consumption <0.5W
IP67 / IP65 rating for indoor or outdoor installations
Function options: output adjustable via potentiometer;
3 in 1 dimming (dim-to-off); Smart timer dimming; DAL I
Typical lifetime>50000 hours
5 years warranty
M
ELG-200-C
IP65 IP67
series
8
Type HL
■ Applications
LED street lighting
LED harbor lighting
LED bay lighting
LED greenhouse lighting
LED flood lighting
Type HL for use in Class I, Division 2
hazardous (Classified) location.
Comply with class Ⅱ application
■ Description
ELG-200-C series is a 200W LED AC/DC driver featuring the constant current mode and high
voltage output. ELG-200-C operates from 100~305VAC and offers models with different rated
current ranging between 700mA and 2100mA. Thanks to the high efficiency up to 93%, with
the fanless design, the entire series is able to operate for -40℃~+85℃ case temperature under
free air convection. The design of metal housing and IP67/IP65 ingress protection level allows
this series to fit both indoor and outdoor applications. ELG-200-C is equipped with various function
options, such as dimming methodologies, so as to provide the optimal design flexibility for LED
lighting system.
■ Model Encoding
ELG - 200 - C700 A -
Type
Blank
A
B
DA
Dx
D2
IP Level
IP67
IP65
IP67
IP67
IP67
IP67
{
Blank:2-wire input for standard model
Input wiring type
3Y:3-wire input for standard model
Function options
Rated output current (700/1050/1400/1750/2100mA)
Output wattage
Series name
Function
Io fixed.
Io adjustable through built-in potentiometer.
3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)
DALI control technology.
Built-in Smart timer dimming function by user request.
Built-in Smart timer dimming and programmable function.
Note
In Stock
In Stock
In Stock
In Stock
By request
In Stock
File Name:ELG-200-C-SPEC 2016-11-29
150~200W Constant Current Mode LED Driver
ELG-200-C
series
SPECIFICATION
MODEL
RATED CURRENT
RATED POWER
ELG-200-C700
ELG-200-C1050
ELG-200-C1400
ELG-200-C1750
ELG-200-C2100
700mA
200VAC ~ 305VAC
200.2W
100VAC ~ 180VAC
150.5W
1050mA
1400mA
1750mA
2100mA
199.5W
198.8W
199.5W
201.6W
150.15W
149.8W
95 ~ 190V
71 ~ 142V
CONSTANT CURRENT REGION Note.2 142 ~ 286V
200V
160V
OPEN CIRCUIT VOLTAGE(max.) 300V
Adjustable for A-Type only (via built-in potentiometer)
OUTPUT
CURRENT ADJ. RANGE
525 ~ 1050mA
700 ~ 1400mA
350 ~ 700mA
CURRENT RIPPLE
5.0% max. @rated current
CURRENT TOLERANCE
±5.0%
SET UP TIME
INPUT
151.2W
48 ~ 96V
120V
105V
875 ~ 1750mA
1050 ~ 2100mA
92%
92%
800ms/115VAC, 500ms/230VAC
Note.4
VOLTAGE RANGE
150.5W
57 ~ 114V
Note.3
100 ~ 305VAC
142 ~ 431VDC
(Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
THD< 20%(@load≧50%/115VC,230VAC; @load≧75%/277VAC)
TOTAL HARMONIC DISTORTION (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
EFFICIENCY (Typ.)
93%
1.0A / 230VAC
92%
1.0A/277VAC
AC CURRENT (Typ.)
93%
1.8A / 115VAC
INRUSH CURRENT(Typ.)
COLD START 65A(twidth=680μs measured at 50% Ipeak)/230VAC; Per NEMA 410
MAX. No. of PSUs on 16A
2 units (circuit breaker of type B) / 4 units (circuit breaker of type C) at 230VAC
CIRCUIT BREAKER
LEAKAGE CURRENT
<0.75mA / 277VAC
NO LOAD / STANDBY
POWER CONSUMPTION
No load power consumption <0.5W for Blank / A / Dx / D2-Type
Standby power consumption <0.5W for B / DA-Type
SHORT CIRCUIT
Hiccup mode, recovers automatically after fault condition is removed
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
205 ~ 250V
160 ~ 180V
315 ~ 370V
Shut down o/p voltage, re-power on to recover
125 ~ 150V
105 ~ 130V
Shut down o/p voltage, re-power on to recover
Tcase=-40 ~ +85℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
Tcase=+85℃
MAX. CASE TEMP.
20 ~ 95% RH non-condensing
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 60℃)
VIBRATION
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY STANDARDS
UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384;
GB19510.14,GB19510.1; IP65 or IP67 approved
DALI STANDARDS
Compliance to IEC62386-101, 102, 207 for DA-Type only
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
SAFETY &
ISOLATION
RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC
EMC EMISSION
Compliance to EN55015,EN61000-3-2 Class C (@load≧50%) ; EN61000-3-3; GB17625.1, GB17743
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Earth:6KV,Line-Line:4KV)
EMC IMMUNITY
MTBF
OTHERS DIMENSION
PACKING
NOTE
958.9K hrs min. Telcordia SR-332 (Bellcore)
235Khrs min.
MIL-HDBK-217F (25℃)
244*71*37.5 mm (L*W*H)
1.22Kg; 12pcs /15.2kg / 0.72CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. Please refer to "DRIVING METHODS OF LED MODULE".
3. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details.
4. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 85℃ or less.
7. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com
File Name:ELG-200-C-SPEC 2016-11-29
150~200W Constant Current Mode LED Driver
ELG-200-C
series
BLOCK DIAGRAM
PFC fosc : 50~120KHz
PWM fosc : 60~130KHz
I/P
EMI FILTER
&
RECTIFIERS
POWER
SWITCHING
PFC
CIRCUIT
RECTIFIERS
&
FILTER
O.L.P.
O.T.P.
O.L.P.
PWM & PFC
CONTROL
Vo+
VoDIM+
DIM(B Type)
DETECTION
CIRCUIT
PFC CONTROL
O.V.P.
CASE :FUNCTIONAL GROUND
DRIVING METHODS OF LED MODULE
※ This series works in constant current mode to directly drive the LEDs.
In the constant current region, the highest voltage at the output of the driver
depends on the configuration of the end systems.
100
Vo(%)
Constant
Current area
Should there be any compatibility issues, please contact MEAN WELL.
50
(min.)
Hiccup
Protection
50
100
Io(%)
Typical output current normalized by rated current (%)
File Name:ELG-200-C-SPEC 2016-11-29
ELG-200-C
150~200W Constant Current Mode LED Driver
series
DIMMING OPERATION
※ 3 in 1 dimming function (for B-Type)
AC/N(Blue)
AC/L(Brown)
DIM+( Gray )*
DIM-(Black)**
Vo-(Blue)
Vo+(Brown)
ELG-200-C
* DIM+ for B-Type
DA+ for DA-Type
PROG+ for D2-Type
* *DIM- for B-Type
DA- for DA-Type
PROG- for D2-Type
Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:
0 ~ 10VDC, or 10V PWM signal or resistance.
Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
Dimming source current from power supply: 100μA (typ.)
◎ Applying additive 0 ~ 10VDC
100%
90%
Vo-
+
+
-
-
DIM+
+
Output current (%)
80%
Vo+
70%
60%
50%
40%
30%
Additive Voltage
-
20%
DIM-
10%
“DO NOT connect "DIM- to Vo-"
0%
0V 1V
2V 3V 4V 5V 6V 7V 8V 9V 10V
Dimming input: Additive voltage
◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):
100%
90%
Vo-
+
+
-
-
DIM+
Output current (%)
80%
Vo+
70%
60%
50%
40%
30%
Additive PWM signal
20%
DIM-
10%
“DO NOT connect "DIM- to Vo-"
0%
◎ Applying additive resistance:
100%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Duty cycle of additive 10V PWM signal dimming input
90%
Vo-
+
80%
+
-
-
DIM+
Additive Resistance
Output current (%)
Vo+
70%
60%
50%
40%
30%
DIM“DO NOT connect "DIM- to Vo-"
20%
10%
0%
Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N
(N=driver quantity for synchronized dimming operation )
Dimming input: Additive resistance
Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< I out<8%.
2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle.
File Name:ELG-200-C-SPEC 2016-11-29
ELG-200-C
150~200W Constant Current Mode LED Driver
series
※ DAL I Interface (primary side; for DA-Type)
Apply DALI signal between DA+ and DA-.
DAL I protocol comprises 16 groups and 64 addresses.
First step is fixed at 8% of output.
※ Smart timer dimming function (for Dxx-Type by User definition)
MEAN WELL Smart timer dimming primarily provides the adaptive proportion dimming profile for the output constant current level to perform up to 14
consecutive hours. 3 dimming profiles hereunder are defined accounting for the most frequently seen applications. If other options may be needed,
please contact MEAN WELL for details.
Ex : ◎ D01-Type: the profile recommended for residential lighting
Dimming Level(%)
Set up for D01-Type in Smart timer dimming software program:
T1
T2
T3
T4
TIME**
06:00
07:00
11:00
---
LEVEL**
100%
70%
50%
70%
Operating Time(HH:MM)
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.
Example: If a residential lighting application adopts D01-Type, when turning on the power supply at 6:00pm, for instance:
[1] The power supply will switch to the constant current level at 100% starting from 6:00pm.
[2] The power supply will switch to the constant current level at 70% in turn, starting from 0:00am, which is 06:00 after the power supply turns on.
[3] The power supply will switch to the constant current level at 50% in turn, starting from 1:00am, which is 07:00 after the power supply turns on.
[4] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.
The constant current level remains till 8:00am, which is 14:00 after the power supply turns on.
Ex: ◎ D02-Type: the profile recommended for street lighting
Dimming Level(%)
Set up for D02-Type in Smart timer dimming software program:
T1
T2
T3
T4
T5
TIME**
01:00
03:00
8:00
11:00
---
LEVEL**
50%
80%
100%
60%
80%
Operating Time(HH:MM)
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.
Example: If a street lighting application adopts D02-Type, when turning on the power supply at 5:00pm, for instance:
[1] The power supply will switch to the constant current level at 50% starting from 5:00pm.
[2] The power supply will switch to the constant current level at 80% in turn, starting from 6:00pm, which is 01:00 after the power supply turns on.
[3] The power supply will switch to the constant current level at 100% in turn, starting from 8:00pm, which is 03:00 after the power supply turns on.
[4] The power supply will switch to the constant current level at 60% in turn, starting from 1:00am, which is 08:00 after the power supply turns on.
[5] The power supply will switch to the constant current level at 80% in turn, starting from 4:00am, which is 11:00 after the power supply turns on. The
constant current level remains till 6:30am, which is 14:00 after the power supply turns on.
File Name:ELG-200-C-SPEC 2016-11-29
150~200W Constant Current Mode LED Driver
ELG-200-C
series
Ex: ◎ D03-Type: the profile recommended for tunnel lighting
Dimming Level(%)
Set up for D03-Type in Smart timer dimming software program:
T1
T2
T3
TIME**
01:30
11:00
---
LEVEL**
70%
100%
70%
Operating Time(HH:MM)
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.
Example: If a tunnel lighting application adopts D03-Type, when turning on the power supply at 4:30pm, for instance:
[1] The power supply will switch to the constant current level at 70% starting from 4:30pm.
[2] The power supply will switch to the constant current level at 100% in turn, starting from 6:00pm, which is 01:30 after the power supply turns on.
[3] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.
The constant current level remains till 6:30am, which is 14:00 after the power supply turns on.
File Name:ELG-200-C-SPEC 2016-11-29
ELG-200-C
150~200W Constant Current Mode LED Driver
series
OUTPUT LOAD vs TEMPERATURE
100
100
80
230VAC
input only
40
20
-40
-25
0
10
20
30
50
230VAC
input only
60
LOAD (%)
60
LOAD (%)
80
230VAC
input
only
40
20
70 (HORIZONTAL)
60
-40
-25
0
20
AMBIENT TEMPERATURE,Ta (℃)
45
55
65
85 (HORIZONTAL)
75
Tcase (℃)
STATIC CHARACTERISTIC
POWER FACTOR (PF) CHARACTERISTIC
※ Tcase at 75℃
100
1
90
0.98
0.96
PF
LOAD (%)
80
75
70
60
230V (200W)
277V (150W)
0.92
50
0.9
40
100
110V (200W)
0.94
120
140
160
180
200 240
250
260
270
280
0.88
305
50%
60%
70%
INPUT VOLTAGE (V) 60Hz
80%
90%
100%
LOAD
※De-rating is needed under low input voltage.
TOTAL HARMONIC DISTORTION (THD)
EFFICIENCY vs LOAD
ELG-200-C series possess superior working efficiency that up to 93% can
be reached in field applications.
※ 700mA Model, Tcase at 75℃
※ 700mA Model,Tcase at 75℃
95
20%
94
18%
THD
14%
12%
115VAC (200W)
10%
230VAC (200W)
8%
277VAC (150W)
6%
EFFICIENCY(%)
93
16%
92
91
230V (200W)
89
277V (150W)
88
4%
87
2%
86
0%
110V (200W)
90
85
50%
60%
70%
80%
LOAD
90%
100%
50%
60%
70%
80%
90%
100%
LOAD
File Name:ELG-200-C-SPEC 2016-11-29
ELG-200-C
150~200W Constant Current Mode LED Driver
series
LIFE TIME
120
LIFETIME(Kh)
100
80
60
40
20
0
20
30
40
50
60
70
80
Tcase ( ℃ )
File Name:ELG-200-C-SPEC 2016-11-29
ELG-200-C
150~200W Constant Current Mode LED Driver
series
MECHANICAL SPECIFICATION
CASE NO.: 245A
※ Blank-Type
Unit:mm
244
233
300±20
300±20
71
53.8
220
AC/N(Blue)
AC/L(Brown)
tc
SJOW 17AWGx2C
&H05RN-F 1.0mm 2
32
SJOW 17AWGx2C
&H05RN-F 1.0mm 2
Vo-(Blue)
Vo+(Brown)
79
4-ψ4.5
: Max. Case Temperature
37
37.5
tc
※ A-Type
244
233
300±20
300±20
71
53.8
220
tc
Vo-(Blue)
Vo+(Brown)
79
SJOW 17AWGx2C
&H05RN-F 1.0mm 2
32
SJOW 17AWGx2C
&H05RN-F 1.0mm 2
4-ψ4.5
: Max. Case Temperature
37
37.5
tc
19
AC/N(Blue)
AC/L(Brown)
41.75
File Name:ELG-200-C-SPEC 2016-11-29
ELG-200-C
150~200W Constant Current Mode LED Driver
series
※ B/DA/D2-Type
244
233
300±20
300±20
71
53.8
220
AC/N(Blue)
AC/L(Brown)
tc
32
SJOW 17AWGx2C
&H05RN-F 1.0mm 2
DIM+( Gray )*
DIM-(Black)**
Vo-(Blue)
Vo+(Brown)
79
SJOW 17AWGx2C
&H05RN-F 1.0mm 2
4-ψ4.5
: Max. Case Temperature
37
37.5
tc
* DIM+ for B-Type
DA+ for DA-Type
PROG+ for D2-Type
* *DIM- for B-Type
DA- for DA-Type
PROG- for D2-Type
※ 3Y Model (3-wire input)
244
233
300±20
71
53.8
tc
32
AC/N(Blue)
AC/L(Brown)
FG (Green/Yellow) SJOW 17AWGx2C
&H05RN-F 1.0mm 2
220
79
SJOW 17AWGx2C
&H05RN-F 1.0mm 2
4-ψ4.5
tc
: Max. Case Temperature
◎ Note1: Please connect the case to FG for the complete EMC deliverance.
◎ Note2: Please contact MEAN WELL for input wiring option with FG.
Installation Manual
Please refer to : http://www.meanwell.com/manual.html
File Name:ELG-200-C-SPEC 2016-11-29