Cynergy3 FFSMC10CU Operates in turbulent fluid Datasheet

FFSMC Series
Submerged type float switch for sewer and industrial waste systems.
This self-weighted cable end float switch is designed for use in turbulent industrial fluids and fluids with suspended
agglomerates, such as sewer water. Version with Polyurethane cable is for use in Fuel Oils.
The switch is water resistant up to a depth of 100m, and is insensitive to humidity and condensation, due to the
particular design of the switch element. This makes it suitable for applications where there may be wide or rapid
fluctuations in ambient or fluid temperatures. Switching capacity of this new design of self-cleaning switch element is
10A at 250V ac.
The outer casing is manufactured in blow moulded Polyethylene (PEHD) and the switch element is surrounded by
non-hygroscopic closed cell expanded polyurethane, hermetically sealing the unit.
The switch is fitted with an internal weight such that it fixes the centre of gravity, and rotation, close to the cable
entry. An external counterweight is supplied to adjust the pivot position.
The moulding shape is rounded to prevent the accumulation of solids, that could cause the float to sink.
Technical Specifications
Cynergy3 part
FFSMC10C
Blue
Contact Form
Switching Current Max. Resistive
Switching Current Max. Inductive
Power Rating
Max
Switching Voltage
Max
Cable Material
Cable length
Body Material
Temperature Range
FFSMC10CU
Red
C/O
10 A
4A
1A
750
180
250
110
AC
DC
AC VA
DC W
AC V
DC V
PVC
°C
°F
bar
Max. working pressure
Model for diesel oil
Model for sewer water
• Operates in Turbulent
Fluids
• Unaffected by
Suspended Solids
Polyurethane
5m
High Density Polyethylene
0 / +55
+ 32 / +131
10
• Cable Mounting
• 100m Depth
Capability
It is necessary to use an auxiliary relay, when switching pump motors or any loads that are not purely resistive.
MECHANICAL
15°
15°
Off - On
Differential
On - Off
195
Cynergy3 Components Ltd
7 Cobham Road
Ferndown Industrial Estate
Wimborne
Dorset BH21 7PE
Tel: +44 (0) 1202 897969
[email protected]
78
ISO 9001C E R T I F IED
www.cynergy3.com
© 2011 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
FFSMC Series
Part Numbering System
FFSMC
10 A U 10
Cable length in metres:
Series
Max. current
Blank = 5M standard
Cable covering:
Contact Form
Blank = PVC
U = Polyurethane
W = WRC Approved
A = n/o
B = n/c
C = c/o
Installation
cable entrance
cable
differential
external counterweight
tie
pipe
wiring diagram for filling pump
wiring diagram for emptying pump
brown
brown
brown
blue
brown
blue
black
pump - off
level drop
pump - on
ISO 9001C E R T I F IED
black
pump - on
level drop
pump - off
www.cynergy3.com
© 2011 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
Similar pages