TI1 LMH0356SQ-40 3-gbps hd/sd sdi reclocker with 4:1 input mux and fr4 eq Datasheet

Product
Folder
Sample &
Buy
Support &
Community
Tools &
Software
Technical
Documents
LMH0356
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
LMH0356 3-Gbps HD/SD SDI Reclocker with 4:1 Input Mux and FR4 EQs
1 Features
3 Description
•
The LMH0356 3-Gbps HD/SD SDI Reclocker with 4:1
Input Mux and FR4 EQs retimes serial digital video
data conforming to the SMPTE ST-424, ST-292, and
ST-259 standards. The LMH0356 operates at serial
data rates of 270 Mbps, 1.483 Gbps, 1.485 Gbps,
2.967 Gbps, and 2.97 Gbps. The LMH0356 supports
DVB-ASI operation at 270 Mbps. The LMH0356
includes an integrated 4:1 input multiplexer for
selecting one of four input data streams for retiming.
In addition, the four inputs of the LMH0356 each have
an FR4 equalizer capable of equalizing 0 to 30 inches
of FR4 trace length.
1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Supports SMPTE ST-424, ST-292, and ST-259
Serial Digital Video Standards
Supports 270-Mbps, 1.483-Gbps, 1.485-Gbps,
2.967-Gbps, and 2.97-Gbps Serial Data Rate
Operation
Supports DVB-ASI at 270 Mbps
Single 3.3-V Supply Operation
430-mW Typical Power Consumption
Integrated 4:1 Multiplexed Input
0 to 30-inch FR4 Equalizer on Each Multiplexed
Input
Two Differential, Reclocked Outputs
Choice of Second Reclocked Output or
Recovered Clock Output
Single 27-MHz External Crystal or Reference
Clock Input
Manual Rate Select Input
SD/HD Operating Rate Indicator Output
Lock Detect Indicator Output
Output Mute Function for Data and Clock
Auto/Manual Reclocker Bypass
Power Saver Mode With Device Power-Down
Control (10-mW Typical Power Consumption in
Disabled State)
Differential LVPECL-Compatible Serial Data
Inputs and Outputs
LVCMOS Control Inputs and Indicator Outputs
48-Pin WQFN or 40-Pin WQFN Package
Industrial Temperature Range: –40°C to 85°C
48-Pin WQFN Version Footprint-Compatible with
the LMH0056 and LMH0036
The LMH0356 automatically detects the incoming
data rate and adjusts itself to retime the incoming
data to suppress accumulated jitter. The LMH0356
recovers the serial data-rate clock and optionally
provides it as an output. The LMH0356 has two
differential serial data outputs; the second output may
be selected as a low-jitter, data-rate clock output.
Controls and indicators are: serial clock or second
serial data output select, manual rate select input,
SD/HD rate indicator output, lock detect output,
auto/manual data bypass, output mute, and device
enable. The serial data inputs, outputs, and serial
clock outputs are differential LVPECL compatible.
The CML serial data and serial clock outputs are
suitable for driving 100-Ω differentially terminated
networks. The control logic inputs and outputs are
LVCMOS compatible.
Device Information(1)
PART NUMBER
LMH0356
SDTV/HDTV and 3-Gbps Serial Digital Video
Interfaces for:
– Digital Video Routers and Switchers
– Digital Video Processing and Editing
Equipment
– DVB-ASI Equipment
– Video Standards and Format Converters
BODY SIZE (NOM)
5.00 mm x 5.00 mm
WQFN (48)
7.00 mm x 7.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Functional Block Diagram
2 Applications
•
PACKAGE
WQFN (40)
SCO_EN
BYPASS/ AUTO BYPASS
RATE0
SD/ HD
CONTROL LOGIC
LOCK DETECT
RATE1
ENABLE
VCCO
BYPASS
50
50
XTAL IN/EXT CLK
XTAL OUT
LOOP FILTER 1
SCO/SDO2
VCO / PLL
SCO/SDO2
LOOP FILTER 2
O/P MUTE
SDI0
SDI0
EQUALIZER
SDI1
SDI1
EQUALIZER
VCCO
50
50
SDO
RETIMER / FIFO
SDO
SDI2
SDI2
EQUALIZER
SDI3
SDI3
EQUALIZER
SEL0
SEL1
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
LMH0356
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
www.ti.com
Table of Contents
1
2
3
4
5
6
7
8
Features ..................................................................
Applications ...........................................................
Description .............................................................
Revision History.....................................................
Description (continued).........................................
Pin Configuration and Functions .........................
Specifications.........................................................
1
1
1
2
3
3
6
7.1
7.2
7.3
7.4
7.5
7.6
7.7
6
6
6
6
7
8
9
Absolute Maximum Ratings .....................................
ESD Ratings..............................................................
Recommended Operating Conditions.......................
Thermal Information ..................................................
DC Electrical Characteristics ....................................
AC Electrical Characteristics.....................................
AC Timing Requirements..........................................
Detailed Description ............................................ 10
8.1 Overview ................................................................. 10
8.2 Functional Block Diagram ....................................... 10
8.3 Feature Description................................................. 11
8.4 Device Functional Modes ....................................... 14
9
Application and Implementation ........................ 15
9.1 Application Information............................................ 15
9.2 Typical Application ................................................. 15
10 Power Supply Recommendations ..................... 19
11 Layout................................................................... 20
11.1 Layout Guidelines ................................................. 20
11.2 Layout Example .................................................... 20
12 Device and Documentation Support ................. 21
12.1
12.2
12.3
12.4
Community Resources..........................................
Trademarks ...........................................................
Electrostatic Discharge Caution ............................
Glossary ................................................................
21
21
21
21
13 Mechanical, Packaging, and Orderable
Information ........................................................... 21
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision K (April 2013) to Revision L
•
2
Page
Added ESD Ratings table, Thermal Information table, Feature Description section, Device Functional Modes
section, Application and Implementation section, Power Supply Recommendations section, Layout section, Device
and Documentation Support section, and Mechanical, Packaging, and Orderable Information section. ............................. 1
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
LMH0356
www.ti.com
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
5 Description (continued)
The LMH0356 is powered from a single 3.3-V supply. Power dissipation is typically 430 mW. The device is
available in two space-saving packages: a 7-mm x 7-mm, 48-pin WQFN and even more space-efficient
5-mm x 5-mm, 40-pin WQFN package.
6 Pin Configuration and Functions
43
42
41
40
39
38
SCO_EN
LF1
44
VEE
LF2
45
VEE
RATE0
46
VEE
RATE1
47
VEE
SEL0
48
VEE
SEL1
RHS Package
48-Pin WQFN
Top View
37
SDI0
1
36
SD/HD
SDI0
2
35
VCC
VCC
3
34
VCC
SDI1
4
33
SDO
SDI1
5
32
SDO
VCC
6
31
VCC
SDI2
7
30
VCC
SDI2
8
29
SCO/SDO2
ENABLE
9
28
SCO/SDO2
SDI3
10
27
VEE
SDI3
11
26
VEE
VCC
12
25
VEE
14
15
16
17
18
19
20
21
22
23
VCC
BYPASS/
AUTO BP
OP MUTE
VEE
XTAL IN/
EXT CLK
VEE
VEE
VEE
XTAL OUT
VEE
24
LOCK DET
13
VEE
LMH0356SQ
(top view)
The exposed die attach pad is the primary negative electrical terminal for this device. It must be connected to the
negative power supply voltage.
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
3
LMH0356
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
www.ti.com
LF2
LF1
37
36
35
34
33
SD/HD
RATE0
38
SCO_EN
RATE1
39
VEE
SEL0
40
VEE
SEL1
RSB Package
40-Pin WQFN
Top View
32
31
SDI0
1
30
VCC
SDI0
2
29
VCC
VCC
3
28
SDO
SDI1
4
27
SDO
SDI1
5
26
VCC
SDI2
6
25
SCO/SDO2
SDI2
7
24
SCO/SDO2
ENABLE
8
23
LOCK DET
SDI3
9
22
NC
SDI3
10
21
NC
BYPASS/
AUTO BP
17
18
19
20
VEE
VCC
16
XTAL OUT
VEE
15
VEE
14
VEE
13
XTAL IN/
EXT CLK
12
OP MUTE
11
VCC
LMH0356SQ-40
(top view)
The exposed die attach pad is the primary negative electrical terminal for this device. It must be connected to the
negative power supply voltage.
Pin Functions
PIN
NAME
BYPASS/
AUTO BYPASS
DESCRIPTION
WQFN
48 PIN
WQFN
40 PIN
15
14
Bypass/Auto Bypass mode select. Bypasses reclocking when high. This pin has
an internal pulldown.
ENABLE
9
8
Device Enable. Powers down device when low. This pin has an internal pullup.
LF1
43
35
Loop Filter.
LF2
44
36
Loop Filter.
LOCK DETECT
24
23
PLL Lock Detect output (active high).
OUTPUT MUTE
16
15
Data and Clock Output Mute input. Mutes the output when low. This pin has an
internal pullup.
RATE0
45
37
Data Rate select input. This pin has an internal pulldown.
RATE1
46
38
Data Rate select input. This pin has an internal pulldown.
SCO/SDO2
28
24
Serial Clock or Serial Data Output 2 Complement.
SCO/SDO2
29
25
Serial Clock or Serial Data Output 2 True.
SCO_EN
37
32
Serial Clock or Serial Data 2 Output select. Sets second output to output the
clock when high and the data when low. This pin has an internal pulldown.
SD/HD
36
31
Data Rate Range output. Output is high for SD and low for HD or 3G.
4
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
LMH0356
www.ti.com
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
Pin Functions (continued)
PIN
DESCRIPTION
WQFN
48 PIN
WQFN
40 PIN
SDI0
1
1
Data Input 0 True.
SDI0
2
2
Data Input 0 Complement.
SDI1
4
4
Data Input 1 True.
SDI1
5
5
Data Input 1 Complement.
SDI2
7
6
Data Input 2 True.
SDI2
8
7
Data Input 2 Complement.
SDI3
10
9
Data Input 3 True.
SDI3
11
10
Data Input 3 Complement.
SDO
32
27
Data Output Complement.
SDO
33
28
Data Output True.
SEL0
47
39
Data Input select input. This pin has an internal pulldown.
SEL1
48
40
Data Input select input. This pin has an internal pulldown.
NAME
VCC
3, 6, 12, 14,
30, 31, 34,
35,
VEE
DAP, 13, 17,
19, 20, 21,
23, 25, 26,
27, 38, 39,
40, 41, 42
12, 17, 18,
20, 33, 34
XTAL IN/EXT CLK
18
16
Crystal or External Oscillator input.
XTAL OUT
22
19
Crystal Oscillator output.
NC
—
21, 22
3, 11, 13, 26,
Positive power supply input.
29, 30
Negative power supply input.
No connect.
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
5
LMH0356
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
www.ti.com
7 Specifications
7.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
MIN
Supply voltage (VCC – VEE)
Logic supply voltage
VEE – 0.15
Logic input current (single input)
UNIT
4
v
VCC + 0.15
V
Vi = VEE – 0.15 V
–5
Vi = VCC + 0.15 V
5
Logic output voltage
mA
VEE – 0.15
VCC + 0.15
V
–8
8
mA
24
mA
125
°C
150
°C
Logic output source/sink current
Serial data output sink current
Junction temperature (TJ)
Storage temperature (Tstg)
(1)
MAX
–65
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
7.2 ESD Ratings
VALUE
V(ESD)
(1)
(2)
Electrostatic discharge
Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 (1)
±8000
Charged-device model (CDM), per JEDEC specification JESD22C101 (2)
±1250
Machine model (MM)
±400
UNIT
V
JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. Manufacturing with
less than 500-V HBM is possible with the necessary precautions. Pins listed as ±8000 V may actually have higher performance.
JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. Manufacturing with
less than 250-V CDM is possible with the necessary precautions. Pins listed as ±1250 V may actually have higher performance.
7.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
MIN
Supply voltage
MAX
UNIT
3.3 – 5%
3.3 + 5%
VEE
VCC
800 – 10%
800 + 10%
mV
16
mA
85
°C
Logic input voltage
Differential serial input voltage
NOM
Serial data or clock output sink current
Operating free-air temperature
–40
V
V
7.4 Thermal Information
LMH0356
THERMAL METRIC (1)
RHS (WQFN)
RSB (WQFN)
48 PINS
40 PINS
UNIT
RθJA
Junction-to-ambient thermal resistance
28.3
31.2
°C/W
RθJC(top)
Junction-to-case (top) thermal resistance
8.8
16.8
°C/W
RθJC(bot)
Junction-to-case (bottom) thermal resistance
1.3
1.2
°C/W
(1)
6
For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report (SPRA953).
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
LMH0356
www.ti.com
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
7.5 DC Electrical Characteristics
over supply voltage and recommended operating temperature ranges (unless otherwise noted) (1) (2)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
VIH
Logic input voltage high level
VIL
Logic input voltage low level
IIH
Logic input current high level
VIH = VCC
IIL
Logic input current low level
VIL = VEE
VOH
Logic output voltage high level
IOH = −2 mA
VOL
Logic output voltage low level
IOL = 2 mA
VSDID
Serial input voltage, differential
VCMI
Input common mode voltage
VSDID = 200 mV
VSDOD
Serial data output voltage,
differential
SDO, SDO2 100-Ω differential
load
620
750
880
mVP-P
SCO 100-Ω differential load,
2970 MHz (3)
400
525
650
mVP-P
VSCOD
Serial clock output voltage,
differential
VCMO
Output common mode voltage
ICC
Power supply current, 3.3-V
supply, total
(1)
(2)
(3)
SDI
2
VCC
VEE
0.8
V
47
65
µA
−18
−25
µA
2
V
VEE + 0.6
(3)
(3)
200
1600
VEE + 0.95
VCC − 0.2
SCO 100-Ω differential load,
1485 or 270 MHz
750
SDO, SCO 100-Ω differential
load
VCC − VSDOD
2970 Mbps, device enabled
Device disabled
(ENABLE = 0)
V
130
3
V
mVP-P
V
mVP-P
V
150
mA
mA
Current flow into device pins is defined as positive. Current flow out of device pins is defined as negative. All voltages are referenced to
VEE (equal to zero volts).
Typical values are stated for: VCC = 3.3 V, TA = 25°C.
This parameter is ensured by characterization over voltage and temperature limits.
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
7
LMH0356
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
www.ti.com
7.6 AC Electrical Characteristics
over supply voltage and recommended operating temperature ranges (unless otherwise noted) (1)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
BRSD
Serial data rate
ST-259
270
Mbps
BRSD
Serial data rate
ST-292
1483, 1485
Mbps
BRSD
Serial data rate
ST-424
2967, 2970
Mbps
TOLJIT
Serial input jitter tolerance 270 Mbps (2) (3) (4)
>6
UIP-P
TOLJIT
Serial input jitter tolerance 270 Mbps
(2) (3) (5)
>0.6
UIP-P
TOLJIT
Serial input jitter tolerance 1483 or 1485 Mbps (2) (3) (4)
>6
UIP-P
TOLJIT
Serial input jitter tolerance 1483 or 1485 Mbps (2) (3) (5)
>0.6
UIP-P
TOLJIT
Serial input jitter tolerance 2967 or 2970 Mbps
(2) (3) (4)
>6
UIP-P
TOLJIT
Serial input jitter tolerance 2967 or 2970 Mbps
tJIT
Serial data output jitter
>0.6
(2) (3) (5)
UIP-P
270 Mbps (3) (6)
0.01
0.03
UIP-P
(3) (7)
tJIT
Serial data output jitter
1483 or 1485 Mbps
0.04
0.05
UIP-P
tJIT
Serial data output jitter
2967 or 2970 Mbps (3) (8)
0.08
0.09
UIP-P
270-Mbps,
<0.1-dB Peaking
275
kHz
1485-Mbps,
<0.1-dB Peaking
1.5
MHz
2970 Mbps,
<0.1-dB Peaking
2.75
MHz
270
MHz
1483
MHz
1485
MHz
2967
MHz
2970
MHz
BWLOOP
Loop bandwidth
FCO
Serial clock output
frequency
270-Mbps data rate
FCO
Serial clock output
frequency
1483-Mbps data rate
FCO
Serial clock output
frequency
1485-Mbps data rate
FCO
Serial clock output
frequency
2967-Mbps data rate
FCO
Serial clock output
frequency
2970-Mbps data rate
tJIT
Serial Clock Output Jitter
SCALG
Serial clock output
alignment with respect to
data interval
See
SCODC
Serial clock output duty
cycle
See
FREF
Reference clock
frequency
FTOL
Reference clock
frequency tolerance
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
8
2
3
psRMS
(3)
40%
60%
45%
55%
(3)
27
MHz
±50
ppm
Typical values are stated for: VCC = 3.3 V, TA = 25°C.
Peak-to-peak amplitude with sinusoidal modulation per SMPTE RP 184-1996 paragraph 4.1. The test data signal shall be color bars.
This parameter is ensured by characterization over voltage and temperature limits.
Refer to A1 in Figure 1 of SMPTE RP 184-1996.
Refer to A2 in Figure 1 of SMPTE RP 184-1996.
PRBS 210– 1, input jitter = 31 psP-P.
PRBS 210– 1, input jitter = 24 psP-P.
PRBS 210– 1, input jitter = 22 psP-P.
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
LMH0356
www.ti.com
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
7.7 AC Timing Requirements
MIN
Acquisition time
See
tr, tf
Logic inputs rise/fall time
10%–90%
tr, tf
Input rise/fall time
20%–80%, 270 Mbps
1.5
(2)
tr, tf
Input rise/fall time
20%–80%, 1483 or 1485 Mbps
tr, tf
Input rise/fall time
20%–80%, 2967 or 2970 Mbps
(2)
tr, tf
Logic outputs rise/fall time
10%–90%
(1)
(2)
(3)
(4)
Output rise/fall time
MAX
15
(2)
tr, tf
NOM
(1)
TACQ
20%–80%
90
ms
ns
1500
ps
270
ps
135
ps
1.5
(3) (4)
UNIT
ns
130
ps
Measured from first SDI transition until Lock Detect output goes high (true).
This specification is ensured by design.
RL = 100-Ω differential.
This parameter is ensured by characterization over voltage and temperature limits.
SDI
NO DATA
270 MBPS DATA
TACQ
NO DATA
1485 MBPS DATA
T2
TACQ
NO DATA
T2
Lock
Dete
ct
T1
T1
T1
SD/HD
SDI
NO DATA
270 MBPS DATA
1485 MBPS DATA
2970 MBPS DATA
TACQ
TACQ
T2
270 MBPS DATA
TACQ
TACQ
T2
T2
Lock
Dete
ct
T1
T1
T1
T1
T1
SD/HD
TACQ = Acquisition Time, defined in AC Timing Requirements
T1 = Time from Lock Detect assertion or deassertion until SD/HD output is valid, typically 37 ns (one 27-MHz clock
period)
T2 = Time from SDI input change until Lock Detect deassertion, 1 ms maximum. SD/HD output is not valid during this
time.
Figure 1. SDI, Lock Detect, and SD/HD Timing
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
9
LMH0356
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
www.ti.com
8 Detailed Description
8.1 Overview
The LMH0356 3-Gbps HD/SD SDI Reclocker with 4:1 Input Mux and FR4 EQs is used in many types of digital
video signal processing equipment. Supported serial digital video standards are ST-259, ST-292, and ST-424.
Corresponding serial data rates are 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.967 Gbps, and 2.97 Gbps. DVB-ASI
data at 270 Mbps may also be retimed. The LMH0356 retimes the serial data stream to suppress accumulated
jitter. It provides two low-jitter, differential, serial data outputs. The second output may be selected to output
either serial data or a low-jitter serial data-rate clock. Controls and indicators are: serial clock or second serial
data output select, manual rate select input, SD/HD rate output, lock detect output, auto/manual data bypass and
output mute.
Serial data inputs are CML and LVPECL compatible. Serial data and clock outputs are differential CML and
produce LVPECL compatible levels. The output buffer design can drive AC or DC-coupled, terminated 100-Ω
differential loads. The differential output level is 750 mVP-P into 100-Ω AC- or DC-coupled differential loads. Logic
inputs and outputs are LVCMOS compatible.
The device package is a 48-pin WQFN or a 40-pin WQFN. Both package options have an exposed die attach
pad. The exposed die attach pad is electrically connected to device ground (VEE) and is the primary electrical
terminal for the device. This terminal must be connected to the negative power supply or circuit ground.
8.2 Functional Block Diagram
SCO_EN
BYPASS/ AUTO BYPASS
RATE0
SD/ HD
CONTROL LOGIC
LOCK DETECT
RATE1
ENABLE
VCCO
BYPASS
50
50
XTAL IN/EXT CLK
XTAL OUT
LOOP FILTER 1
SCO/SDO2
VCO / PLL
SCO/SDO2
LOOP FILTER 2
O/P MUTE
SDI0
SDI0
EQUALIZER
SDI1
SDI1
EQUALIZER
VCCO
50
50
SDO
RETIMER / FIFO
SDO
SDI2
SDI2
EQUALIZER
SDI3
SDI3
EQUALIZER
SEL0
SEL1
10
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
LMH0356
www.ti.com
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
8.3 Feature Description
8.3.1 Functional Block Description
8.3.1.1 Serial Data Input and Outputs
The differential serial data inputs, SDI0-SDI3, accept serial digital video data at the rates specified in Table 1.
Figure 2 shows the equivalent input circuit for SDI[3:0] and SDI[3:0]. The serial data inputs are differential
LVPECL compatible. These inputs have 50-Ω internal terminations (100-Ω differential) with an internal bias as
shown in Figure 2. These inputs are intended to be DC-coupled to devices such as the LMH0344 adaptive cable
equalizer. DC-coupled inputs must be kept within the specified common mode range. The inputs may be ACcoupled if the input signal is outside the input common mode range of the device (such as when interfacing to 5V PECL), and in that case the bias is supplied internally so no additional input biasing is required. See Figure 2
for more information on input interfacing.
The LMH0356 provides four independent, equalized and multiplexed data inputs. The active input channel is
selected via the SEL0 and SEL1 pins, as shown in Table 2. The equalizer on each of the four inputs is capable
of equalizing up to 30 inches of FR4 trace without the need for programming for different trace lengths or data
rates.
The LMH0356 has two retimed, differential, serial data outputs: SDO and SCO/SDO2. These outputs provide
low-jitter, differential, retimed data to devices such as the LMH0302 cable driver. Output SCO/SDO2 is
multiplexed and can provide either a second serial data output or a serial clock output. Figure 3 shows the
equivalent output circuit for SDO, SDO, SCO/SDO2, and SCO/SDO2.
The SCO_EN input controls the operating mode for the SCO/SDO2 output. When the SCO_EN input is high the
SCO/SDO2 output provides a serial clock. When SCO_EN is low, the SCO/SDO2 output provides retimed serial
data.
Both differential serial data outputs, SDO and SCO/SDO2, are muted when the OUTPUT MUTE input is a logic
low level. SCO/SDO2 also mutes when the Bypass mode is activated when this output is operating as the serial
clock output. When muted, SDO and SDO (or SDO2 and SDO2) will assume opposite differential output levels.
The CML serial data outputs are differential LVPECL compatible. These outputs have internal 50-Ω pullups and
are suitable for driving AC- or DC-coupled, 100-Ω center-tapped, AC-grounded or 100-Ω un-center-tapped,
differentially terminated networks.
VCC
20 kW
1 pF
80 kW
VCC
2 kW
SDI[3:0]
VCC
2 kW
50W
network
50W
network
SDI[3:0]
Figure 2. Equivalent SDI Input Circuit (SDI[3:0], SDI[3:0])
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
11
LMH0356
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
www.ti.com
Feature Description (continued)
VCC
VCC
VCC
50:
50:
SDO, SCO/SDO2
SDO, SCO/SDO2
Figure 3. Equivalent SDO Output Circuit (SDO, SDO, SCO/SDO2, SCO/SDO2)
8.3.1.2 Operating Serial Data Rates
This device operates at serial data rates of 270 Mbps, 1483 Mbps, 1485 Mbps, 2967 Mbps, and 2970 Mbps. The
device does not lock to harmonics of these rates. The device does not lock and automatically enters the
reclocker bypass mode for the following data rates: 143 Mbps, 177 Mbps, 360 Mbps, and 540 Mbps.
8.3.1.3 Serial Data Clock/Serial Data 2 Output
The Serial Data Clock/Serial Data 2 Output is controlled by the SCO_EN input and provides either a second
retimed serial data output or a low jitter differential clock output appropriate to the serial data rate being
processed. When operating as a serial clock output, the rising edge of the clock is positioned within the
corresponding serial data bit interval within 10% of the center of the data interval.
Differential output SCO/SDO2 functions as the second serial data output when the SCO_EN input is a logic-low
level. This output functions as the serial clock output when the SCO_EN input is a logic-high level. The SCO_EN
input has an internal pulldown device and the default state of SCO_EN is low (serial data output 2 enabled).
SCO/SDO2 is muted when the OUTPUT MUTE input is a logic low level. When the Bypass mode is activated
and this output is functioning as a serial clock output, the output is muted. If an unsupported data rate is used
while in Auto Bypass mode with this output functioning as a serial clock output, the output is invalid.
8.3.2 Control Inputs and Indicator Outputs
8.3.2.1 Serial Data Rate Selector
The Serial Data Rate Selector (RATE [1:0]) permits the user to fix the operating serial data rate. RATE[1:0] pins
have internal pull-downs which maintain a logic-low input condition unless externally driven to a logic-high
condition. This input also serves to place the device in a test mode. The codes shown in Table 1 select the
desired operating serial data rate. The LMH0356 then enters either the Auto-Rate Detect mode or a single
operating rate. Selecting the 270-Mbps rate mode may also be used when reclocking DVB-ASI data. DVB-ASI
data is MPEG2 coded data that is transmitted in 8B10B coding. The device reclocks this data without harmonic
locking.
Table 1. Data Rate Select Input Codes
RATE [1:0]
CODE
12
DATA RATE OR MODE
00
Auto-Rate Detect mode
01
270 Mbps
10
1483/1485 Mbps, 2967/2970 Mbps
COMMENTS
May be used to support DVB-ASI operation
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
LMH0356
www.ti.com
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
8.3.2.2 Serial Data Input Selector
The Serial Data Input Selector (SEL [1:0]) allows the user to select the active input channel. Table 2 shows the
input selected for a given state of SEL [1:0]. The SEL pins have internal pulldowns.
Table 2. Data Input Select Codes
SEL [1:0] CODE
SELECTED INPUT
00
SDI0
01
SDI1
10
SDI2
11
SDI3
8.3.2.3 Lock Detect
The Lock Detect output, when high, indicates that data is being received and the PLL is locked. Lock Detect may
be connected to the OUTPUT MUTE input to mute the data and clock outputs when no data signal is being
received. Note that when the Bypass/Auto Bypass input is set high, Lock Detect will remain low. See Table 3.
8.3.2.4 OUTPUT MUTE
The OUTPUT MUTE input, when low, mutes the serial data and clock outputs. It may be connected to Lock
Detect or externally driven to mute or un-mute the outputs. If OUTPUT MUTE is connected to Lock Detect, then
the data and clock outputs are muted when the PLL is not locked. This function overrides the Bypass function;
see Table 3. OUTPUT MUTE has an internal pullup device to enable the output by default.
8.3.2.5 Bypass/AUTO BYPASS
The Bypass/Auto Bypass input, when high, forces the device to output the data without reclocking it. When this
input is low, the device automatically bypasses the reclocking function when the device is in an unlocked
condition or the detected data rate is a rate which the device does not support. Note that when the Bypass/Auto
Bypass input is set high, Lock Detect remains low. See Table 3. BYPASS/AUTO BYPASS has an internal
pulldown device.
Table 3. Control Functionality
LOCK DETECT
OUTPUT MUTE
BYPASS/AUTO BYPASS
0
1
X
PLL unlocked, reclocker bypassed
DEVICE STATUS
1
1
0
PLL locked to supported data rate, reclocker not bypassed
X
0
X
Outputs muted
0
LOCK DETECT
X
Outputs muted
1
LOCK DETECT
0
PLL locked to supported data rate, reclocker not bypassed
8.3.2.6 SD/HD
The SD/HD output indicates whether the LMH0356 is processing SD or HD / 3 Gbps data rates. It may be used
to control another device such as the LMH0302 cable driver. When this output is high it indicates that the data
rate is 270 Mbps. When low, the indicated data rate is 1483, 1485, 2967, or 2970 Mbps. The SD/HD output is a
registered function and is only valid when the PLL is locked and the Lock Detect output is high. When the PLL is
not locked (the Lock Detect output is low), the SD/HD output defaults to HD (low). The SD/HD output is
undefined for a short time after lock detect assertion or de-assertion due to a data rate change on SDI. See
Figure 1 for a timing diagram showing the relationship between SDI, Lock Detect, and SD/HD.
8.3.2.7 SCO_EN
Input SCO_EN enables the SCO/SDO2 differential output to function either as a serial clock or second serial
data output. SCO/SDO2 functions as a serial clock when SCO_EN is high. This pin has an internal pulldown
device. The default state (low) enables the SCO/SDO2 output as a second serial data output.
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
13
LMH0356
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
www.ti.com
8.3.2.8 ENABLE
The ENABLE pin is used to enable or disable the LMH0356. When the device is disabled, the output drivers and
most of the internal circuitry are powered down. The crystal oscillator and external clock reference circuitry
(XTAL IN and XTAL OUT) remain active regardless of the state of ENABLE, allowing the 27-MHz reference clock
signal to be generated and passed on to additional reclockers. The ENABLE pin is active high and has an
internal pullup device to enable the LMH0356 by default.
8.3.2.9 Crystal or External Clock Reference
The LMH0356 uses a 27-MHz crystal or external clock signal as a timing reference input. A 27-MHz parallel
resonant crystal and load network may be connected to the XTAL IN/EXT CLK and XTAL OUT pins.
Alternatively, a 27-MHz LVCMOS compatible clock signal may be input to XTAL IN/EXT CLK. Parameters for a
suitable crystal are given in Table 4.
Table 4. Crystal Parameters
PARAMETER
VALUE
Frequency
27 MHz
Frequency stability
±50 ppm at recommended drive level
Operating mode
Fundamental mode, parallel resonant
Load capacitance
20 pF
Shunt capacitance
7 pF
Series resistance
40 Ω (maximum)
Recommended drive level
100 µW
Maximum drive level
500 µW
Operating temperature
−10°C to 60°C
8.4 Device Functional Modes
The LMH0356 features are programmed using pin control. Refer to Control Inputs and Indicator Outputs for
details.
14
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
LMH0356
www.ti.com
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
9 Application and Implementation
NOTE
Information in the following applications sections is not part of the TI component
specification, and TI does not warrant its accuracy or completeness. TI’s customers are
responsible for determining suitability of components for their purposes. Customers should
validate and test their design implementation to confirm system functionality.
9.1 Application Information
The LMH0356 3-Gbps HD/SD SDI Reclocker with 4:1 Input Mux and FR4 EQs is used in many types of digital
video signal processing equipment.
9.2 Typical Application
Figure 4 and Figure 5 show typical system and application circuits for the 48-pin WQFN version of the LMH0356.
0-20" FR4
LMH0344
Equalizer
0-30" FR4
LMH0344
Equalizer
DS25CP104
4x4 LVDS
Crosspoint
LMH0344
Equalizer
LMH0302
Cable Driver
LMH0344
Equalizer
LMH0356
Reclocker
LMH0344
Equalizer
LMH0344
Equalizer
LMH0302
Cable Driver
DS25CP104
4x4 LVDS
Crosspoint
LMH0344
Equalizer
LMH0344
Equalizer
Figure 4. System Block Diagram
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
15
LMH0356
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
www.ti.com
Typical Application (continued)
SCO_EN
RATE0
RATE1
56 nF
SEL0
SEL1
Differential
Data Input 3
10
11
43
LF1
42
VEE
41
VEE
40
VEE
39
VEE
38
VEE
37
SCO_EN
45
44
LF2
RATE0
RATE1
SDI3
SDI3
VCC
14
VCC
13
VEE
12
SDI2
ENABLE
VEE
22
XTAL OUT
23
VEE
24
LOCK DET
9
LMH0356
SDI2
VEE
8
36
SD/ HD
35
VCC
34
VCC
33
SDO
32
SDO
31
VCC
30
VCC
29
SCO/SDO2
28
SCO/SDO2
27
VEE
26
VEE
25
V
SD/ HD
Data
Output
Clock Output or
2nd Data Output
EE
DAP
21
7
20
Differential
Data Input 2
SDI1
VCC
XTAL IN/EXT CLK
VEE
6
SDI1
19
5
17
18
4
OP MUTE
VEE
Differential
Data Input 1
SDI0
VCC
16
3
SDI0
VCC
BP/ AUTO BP
1
2
15
Differential
Data Input 0
SEL0
SEL1
47
46
VCC
48
VCC
ENABLE
27 MHz
LOCK DET
BYPASS/AUTO BP
OP MUTE
39 pF
39 pF
Figure 5. Application Circuit
ENABLE has an internal pullup to enable the device by default. This pin may be pulled low to put the LMH0356
into a powered down mode.
BP/AUTO BP has an internal pulldown to enable Auto Bypass mode by default. This pin may be pulled high to
force the LMH0356 to bypass all data.
OP MUTE has an internal pullup to enable the outputs by default. This pin may be pulled low to mute the
outputs.
The XTAL IN/EXT CLK and XTAL OUT pins are shown with a 27-MHz crystal and the proper loading. The crystal
should match the parameters described in Table 4. Alternately, a 27-MHz LVCMOS compatible clock signal may
be input to XTAL IN/EXT CLK.
The active high LOCK DET output provides an indication that proper data is being received and the PLL is
locked.
The SD/HD output may be used to drive the SD/HD pin of an SDI cable driver (such as the LMH0302) in order to
properly set the cable driver’s edge rate for SMPTE compliance. It defaults to HD/3G (low) when the LMH0356 is
not locked.
16
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
LMH0356
www.ti.com
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
Typical Application (continued)
SCO_EN has an internal pulldown to set the second output (SCO/SDO2) to output data. This pin may be pulled
high to set the second output as a serial clock.
The external loop filter capacitor (between LF1 and LF2) must be 56 nF. This is the only supported value; the
loop filter capacitor must not be changed.
RATE0 and RATE1 have internal pulldowns to select Auto-Rate Detect mode by default. These pins may also be
used to set the device to SD mode or HD/3G mode.
SEL0 and SEL1 have internal pulldowns to select the SDI0 input by default.
9.2.1 Design Requirements
For this design example, use the parameters listed in Table 5 as the input parameters.
Table 5. LMH0356 Design Parameters
DESIGN PARAMETER
REQUIREMENTS
Input AC-coupling capacitors
The user should check output common mode voltage of the device attached
to SDI pins. If AC-coupling capacitor is required, AC-coupling capacitor is
expected to be 4.7 μF ±10%. Refer to Input Output Interfacing for details.
Output AC-coupling capacitors
The user should check input common mode voltage of the device attached to
SDO pins. If AC-coupling capacitor is required, AC-coupling capacitor is
expected to be 4.7 μF ±10%. Refer to Input Output Interfacing for details.
DC power supply coupling capacitors
De-coupling capacitors are required to minimize power supply ripple noise.
Place 4.7-μF and 0.1-μF surface mount ceramic capacitors as close to the
device VCC pin as possible .
High-speed SDI and SDO trace impedance
SDI± and SDO± must be routed with coupled board traces with 100-Ω ± 5%
differential impedance.
Use of ENABLE, RATE0/1, SCO_EN, OP MUTE, and
BP/AUTO BP pins
Set these pins for desired operating mode.
LOCK DET pin
Use this pin for lock indication or to OP MUTE pin to enable output when
locked.
SD/HD Pin
Use SD/HD to set cable driver edge rate or to FPGA for lock rate monitoring.
9.2.2 Detailed Design Procedure
To begin the design process, determine the following:
1. Check that the power supply meets the DC and AC requirements in DC Electrical Characteristics.
2. Select the proper pull-high or pull-low resistors for ENABLE, RATE0/1, SCO_EN, OP MUTE, and BP/AUTO
BP pins.
3. Use SD/HD output signal to set the cable driver edge rate.
4. Refer to Input Output Interfacing for Input or Output DC- or AC-coupling.
5. Choose small 0402 surface mount ceramic capacitors for AC-coupling and bypass capacitors.
6. Pay close attention to high speed printed circuit board layout for the high speed SDI± and SDO± signals.
7. Plan out overall system jitter budget with AC Electrical Characteristics in mind.
9.2.2.1 Input Output Interfacing
The inputs are LVPECL compatible. The LMH0356 has a wide input common mode range, and in most cases
the input should be DC-coupled. For DC-coupling, the inputs must be kept within the common mode range
specified in DC Electrical Characteristics.
Figure 6 shows an example of a DC-coupled interface between the LMH0344 cable equalizer and the LMH0356.
The LMH0344 output common mode voltage and voltage swing are within the range of the input common mode
voltage and voltage swing of the LMH0356. In this figure, the LMH0344 cable equalizer restores the signal after
the coaxial cable. The LMH0356 FR4 equalizer restores the signal after the loss due to the FR4 trace. The
LMH0356 inputs have 50-Ω internal terminations (100-Ω differential) to terminate the transmission line, so no
additional components are required.
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
17
LMH0356
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
www.ti.com
The outputs are LVPECL compatible. SDO is the primary data output and SCO/SDO2 is a second output that
may be set as the serial clock or a second data output. Both outputs are always active. The LMH0356 output
should be DC-coupled to the input of the receiving device as long as the common mode ranges of both devices
are compatible.
Figure 7 shows an example of a DC-coupled interface between the LMH0356 and LMH0302 cable driver. All that
is required is a 100-Ω differential termination as shown. The resistor should be placed as close to the LMH0302
input as possible. If desired, this network may be terminated with two 50-Ω resistors and a center tap capacitor to
ground in place of the single 100-Ω resistor.
The LMH0356 has multiple ground connections, however; the primary ground connection is through the large
exposed DAP. The DAP must be connected to ground for proper operation of the LMH0356.
LMH0344
3G/HD/SD
SDI Cable Equalizer
Coaxial Cable
1.0 PF
75:
SDI
SDO
LMH0356
0-30" FR4 Trace
1.0 PF
3.9 nH
SDI0
SDI
SDI0
SDO
75:
37.4:
Figure 6. DC Input Interface
+3.3V
75:
LMH0302
3G/HD/SD
SDI Cable Driver
75:
5.6 nH
75:
4.7 PF
Coaxial Cable
75:
4.7 PF
Coaxial Cable
SDI
SDO
SDO
LMH0356
100:
SDO
SDO
SD/HD
75:
SDI
SD/HD
75:
5.6 nH
Figure 7. DC Output Interface
18
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
LMH0356
www.ti.com
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
9.2.3 Application Curves
Figure 8. 2.97-Gbps Signal Before FR4 Equalization
(0.6-UI Jitter)
Figure 9. 2.97-Gbps Signal After FR4 Equalization
(0.23-UI Jitter)
Figure 10. 2.97-Gbps Signal After Reclocking
(0.06-UI Jitter)
10 Power Supply Recommendations
Follow these general guidelines when designing the power supply:
1. The power supply must be designed to provide the recommended operating conditions in terms of DC
voltage.
2. The maximum current consumption for the LMH0356 is provided in the data sheet. This figure can be used
to calculate the maximum current the supply must provide.
3. Place 4.7-μF bulk capacitor and 0.1-μF de-coupling capacitors as close to LMH0356 VCC pins as possible.
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
19
LMH0356
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
www.ti.com
11 Layout
11.1 Layout Guidelines
Figure 11 shows a typical PCB layout for the 48-pin WQFN version of the LMH0356. The following guidelines are
recommended for designing the board layout for the LMH0356:
1. Choose a suitable board stack-up such that it supports 100-Ω differential trace routing on board layer 1. This
is typically done with layer 2 ground plane reference for the 100-Ω differential traces.
2. Place 56-nF loop filter capacitor as close to the loop filter pins as possible.
3. Use coupled differential traces with 100-Ω ± 5% impedance for signal routing to SDI± and SDO± pins. These
are usually 5 to 8-mil trace width reference to a ground plane at layer 2.
4. DAP of the package must be connected to the ground plane through an array of via. These nine vias are
solder-masked to avoid solder flowing into the plated-through holes during the board manufacturing process.
DAP is divided into 16 squares (1.09 mm × 1.09 mm) inside 5.1-mm × 5.1-mm landing pad.
5. Connect supply pins VCC and VEE to the power and ground planes with short via. The via is usually placed
tangent to the supply pin landing pad with the shortest trace possible.
6. Power supply bypass capacitors must be placed close to the supply pin. They are commonly placed at the
bottom layer sharing the ground connector of the DAP.
11.2 Layout Example
Figure 11 shows a typical PCB layout for the 48-pin WQFN version of the LMH0356.
56 nF
48 47 46 45 44 43 42 41
SDI0
____
SDI0
VCC
SDI1
____
40 39
38
37
1
36
2
35
3
34
4
33
5
32
6
31
7
30
8
29
SDI1
VCC
SDI2
____
SDI2
VCC
SDI3
____
SDI3
VCC
9
28
10
27
11
26
12
25
13 14
15 16 17 18
19 20
SD0
___
_
SD0
SC0/SDO2
________
SC0/SDO2
21 22 23 24
Figure 11. LMH0356 PCB Layout Example
20
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
LMH0356
www.ti.com
SNLS270L – AUGUST 2007 – REVISED JANUARY 2016
12 Device and Documentation Support
12.1 Community Resources
The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective
contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of
Use.
TI E2E™ Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration
among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help
solve problems with fellow engineers.
Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and
contact information for technical support.
12.2 Trademarks
E2E is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
12.3 Electrostatic Discharge Caution
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
12.4 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
13 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
Submit Documentation Feedback
Copyright © 2007–2016, Texas Instruments Incorporated
Product Folder Links: LMH0356
21
PACKAGE OPTION ADDENDUM
www.ti.com
3-Nov-2015
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
LMH0356SQ-40/NOPB
ACTIVE
WQFN
RSB
40
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 85
L0356
LMH0356SQ/NOPB
ACTIVE
WQFN
RHS
48
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-3-260C-168 HR
-40 to 85
L0356
LMH0356SQE-40/NOPB
ACTIVE
WQFN
RSB
40
250
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 85
L0356
LMH0356SQE/NOPB
ACTIVE
WQFN
RHS
48
250
Green (RoHS
& no Sb/Br)
CU SN
Level-3-260C-168 HR
-40 to 85
L0356
LMH0356SQX-40/NOPB
ACTIVE
WQFN
RSB
40
4500
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 85
L0356
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
3-Nov-2015
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
3-Nov-2015
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
LMH0356SQ-40/NOPB
WQFN
RSB
40
1000
178.0
12.4
5.3
5.3
1.3
8.0
12.0
Q1
LMH0356SQ/NOPB
WQFN
RHS
48
1000
330.0
16.4
7.3
7.3
1.3
12.0
16.0
Q1
LMH0356SQE-40/NOPB
WQFN
RSB
40
250
178.0
12.4
5.3
5.3
1.3
8.0
12.0
Q1
LMH0356SQE/NOPB
WQFN
RHS
48
250
178.0
16.4
7.3
7.3
1.3
12.0
16.0
Q1
LMH0356SQX-40/NOPB
WQFN
RSB
40
4500
330.0
12.4
5.3
5.3
1.3
8.0
12.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
3-Nov-2015
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LMH0356SQ-40/NOPB
LMH0356SQ/NOPB
WQFN
RSB
40
1000
210.0
185.0
35.0
WQFN
RHS
48
1000
367.0
367.0
38.0
LMH0356SQE-40/NOPB
LMH0356SQE/NOPB
WQFN
RSB
40
250
210.0
185.0
35.0
WQFN
RHS
48
250
213.0
191.0
LMH0356SQX-40/NOPB
55.0
WQFN
RSB
40
4500
367.0
367.0
35.0
Pack Materials-Page 2
MECHANICAL DATA
RSB0040A
SQF40A (Rev B)
www.ti.com
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2016, Texas Instruments Incorporated
Similar pages