MMD MAC5 14 pin dip oscillator Datasheet

MAC Series 14 Pin DIP Oscillator
 Industry Standard Package
 RoHS Compliant Available
 32.768KHz
 CMOS Output
Frequency Range
32.768KHZ
Frequency Stability (Inclusive of Temperature, Load, Voltage
and Aging)
See Part Number Guide
Operating Temperature
See Part Number Guide
Storage Temperature
-55°C to +125°C
Supply Voltage
5.0VDC ±10%
Supply Current
10mA max
Waveform
CMOS
Logic “0”
10% Vdd max
Logic “1”
90% Vdd min
Duty Cycle
See Part Number Guide
Load
10K Ohms // 15pF
Rise / Fall Time
10% to 90% of waveform
10nSec max
Voh = 70% of Vdd min or No Connection to Enable Output
Vol = 30% of Vdd max or grounded to Disable Output (High Imped-
Tri-State Operation
ance)
Environmental & Mechanical Detail
Shock
Solderability
MIL-STD-883, Method 2002 Cond B
MIL-STD-883, Method 2003
Solvent Resistance
MIL-STD-202, Method 215
Marking Detail
Line 1 = MXXXXX
M
=
MMD
XXXXX
=
Frequency in MHZ
Line 2 = SYYWWL
S =
Vibration
MIL-STD-883, Method 2007, Cond A
YYWW
Gross Leak Test
MIL-STD-883, Method 1014, Cond C
L
Fine Leak Test
MIL-STD-883, Method 1014, Cond A2
MSL
Level 1 per IPC/JEDEC J-STD 20
=
=
Internal Code
4 Numerical Digit Date
Code (Year / Week)
Denotes RoHS Compliant
Line 3 = XXXXX
Internal use only
May vary with lots
Pin 1 Designator
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
In the event of conflict, the requirements of this specification shall govern.
Revisions only with customer approval
Revision:
11/18/10 E
Pg 1 of 2
Part Number Guide
5
MAC
32.768KHZ
Symmetry
Blank = 40/60%
A = 45/55%
14 pin DIP
RoHS Compliant
Blank = Not Compliant
F = Is RoHS Compliant
Frequency
Stability
050 = ±50 ppm
100 = ±100 ppm
Supply Voltage
5 = +5.0 VDC
Operating Temperature
Blank = 0°C to +70°C
27 = -20°C to +70°C
48 = -40°C to +85°C
Value Added Options
Blank = No Added Options
G1 = Gull-Wing (option 1)
G = Gull-Wing (option 2)
CLXXX = Cut Leads
XXX = Lead Length Code
Pin 1 Connection
Blank = No Connect
H = Tri-state
PLEASE CONSULT WITH MMD SALES DEPARTMENT FOR ANY OTHER PARAMETERS OR OPTIONS
Mechanical Details
20.70 [.815]
MAX
5.08 [.200]
MXXXXX
SYYWWL
XXXXX
5.08 [.200]
MIN
.50 [.020]
15.24 [.600]
13.10 [.516]
MAX
1
7
7.62 [.300]
14
8
PIN CONNECTIONS
PIN 1 N/C OR TRI-STATE
PIN 7 CASE GROUND
PIN 8 OUTPUT
PIN 14 SUPPLY VOLTAGE
DIMENSIONS IN BRACKET ARE IN INCHES
EXTERNAL BYPASS CAPACITOR RECOMMENDED
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
In the event of conflict, the requirements of this specification shall govern.
Revisions only with customer approval
Revision:
11/18/10 E
Pg 2 of 2
Similar pages