STMicroelectronics LD39020ADTPU12R 200 ma very low quiescent current linear regulator ic Datasheet

LD39020
200 mA very low quiescent current linear regulator IC
Datasheet - production data
Applications




DFN1x1-4L
SOT23-5L

Mobile phones
Personal digital assistants (PDAs)
Digital still cameras (DSC)
Cordless phones and similar batterypowered systems
Portable media players
Description
Features














Input voltage from 1.5 to 5.5 V
Ultra low dropout voltage (200 mV typ. at
200 mA load)
Very low quiescent current (20 µA typ at no
load, 0.03 µA typ in off mode)
Output voltage tolerance: ±0.5% (A version)
or ± 2.0% @ 25 °C (standard version)
200 mA guaranteed output current
High PSRR (80 dB@1 kHz, 50 db@100
kHz)
Wide range of output voltages available on
request: from 0.8 V up to 5.0 V in 50 mV
step
Logic-controlled electronic shutdown
Internal soft-start
Optional output voltage discharge feature
Compatible with ceramic capacitor COUT =
0.47 µF
Internal constant current and thermal
protections
Available in DFN 1x1-4L and SOT23-5L
Operating temperature range: -40 °C to
125 °C
June 2015
The LD39020 high accuracy voltage regulator
provides 200 mA of maximum current from an
input voltage ranging from 1.5 V to 5.5 V, with a
typical dropout voltage of 200 mV.
It is available in DFN 1x1-4L and SOT23-5L
packages, allowing the maximum space saving.
The device is stabilized with a ceramic capacitor
on the output. The ultra low drop voltage, low
quiescent current and low noise features,
together with the internal soft-start circuit, make
the LD39020 suitable for low power batteryoperated applications.
An enable logic control function puts the
LD39020 in shutdown mode allowing a total
current consumption lower than 0.1 µA. Constant
current and thermal protection are provided.
DocID025316 Rev 3
This is information on a product in full production.
1/30
www.st.com
Contents
LD39020
Contents
1
Diagram ............................................................................................ 5
2
Pin configuration ............................................................................. 6
3
Typical application .......................................................................... 7
4
5
Maximum ratings ............................................................................. 8
Electrical characteristics ................................................................ 9
6
Application information ................................................................ 12
6.1
Soft start function ............................................................................ 12
6.2
Output discharge function ............................................................... 12
6.3
Input and output capacitors ............................................................. 12
7
Typical characteristics .................................................................. 13
8
Package information ..................................................................... 18
9
10
2/30
8.1
DFN4 1x1-4L package information.................................................. 19
8.2
SOT23-5L package information ...................................................... 22
8.3
SOT23-5L packing information........................................................ 24
Order code ..................................................................................... 25
Revision history ............................................................................ 29
DocID025316 Rev 3
LD39020
List of tables
List of tables
Table 1: Pin description .............................................................................................................................. 6
Table 2: Absolute maximum ratings ........................................................................................................... 8
Table 3: Thermal data ................................................................................................................................. 8
Table 4: ESD Performance ......................................................................................................................... 8
Table 5: Electrical characteristics for LD39020T, LD39020DT................................................................... 9
Table 6: Electrical characteristics for LD39020AT, LD39020ADT ............................................................ 10
Table 7: DFN 1x1-4L mechanical data ..................................................................................................... 20
Table 8: SOT23-5L mechanical data ........................................................................................................ 22
Table 9: SOT23-5L tape and reel mechanical data .................................................................................. 24
Table 10: DFN1x1-4L order code ............................................................................................................. 25
Table 11: SOT23-5L order code .............................................................................................................. 28
Table 12: Document revision history ........................................................................................................ 29
DocID025316 Rev 3
3/30
List of figures
LD39020
List of figures
Figure 1: Block diagram .............................................................................................................................. 5
Figure 2: Pin connection (top view) ............................................................................................................ 6
Figure 3: Typical application circuits ........................................................................................................... 7
Figure 4: Output voltage vs. temperature (IOUT = 1 mA) ........................................................................... 13
Figure 5: Output voltage vs. temperature (IOUT = 200 mA) ....................................................................... 13
Figure 6: Line regulation vs. temperature ................................................................................................. 13
Figure 7: Load regulation vs. temperature ................................................................................................ 13
Figure 8: Quiescent current vs. temperature (IOUT = 0 mA) ...................................................................... 14
Figure 9: Quiescent current vs. temperature (IOUT = 200 mA) .................................................................. 14
Figure 10: Shutdown current vs. temperature .......................................................................................... 14
Figure 11: Quiescent current vs. load current .......................................................................................... 14
Figure 12: Quiescent current vs. input voltage ......................................................................................... 14
Figure 13: Dropout voltage vs temperature .............................................................................................. 14
Figure 14: Supply voltage rejection vs. frequency .................................................................................... 15
Figure 15: Supply voltage rejection vs. input voltage ............................................................................... 15
Figure 16: Output noise spectral density .................................................................................................. 15
Figure 17: Stability area vs (COUT, ESR) ................................................................................................... 15
Figure 18: Enable startup (VOUT = 1 V) ..................................................................................................... 15
Figure 19: Enable startup (VOUT = 5 V) ..................................................................................................... 15
Figure 20: Turn-on time (VOUT = 1 V) ........................................................................................................ 16
Figure 21: Turn-off time (VOUT = 1 V) ........................................................................................................ 16
Figure 22: Turn-on time (VOUT = 5 V) ........................................................................................................ 16
Figure 23: Turn-off time (VOUT = 5 V) ........................................................................................................ 16
Figure 24: Line transient (VOUT = 1 V) ....................................................................................................... 16
Figure 25: Line transient (VOUT = 5 V) ....................................................................................................... 16
Figure 26: Load transient (VOUT = 1 V)...................................................................................................... 17
Figure 27: Load transient (VOUT = 5 V)...................................................................................................... 17
Figure 28: DFN 1x1-4L package outline ................................................................................................... 19
Figure 29: DFN 1x1-4L recommended footprint ....................................................................................... 21
Figure 30: SOT23-5L package outline ...................................................................................................... 22
Figure 31: SOT23-5L recommended footprint .......................................................................................... 23
Figure 32: SOT23-5L tape and reel outline .............................................................................................. 24
4/30
DocID025316 Rev 3
LD39020
1
Diagram
Diagram
Figure 1: Block diagram
The output discharge MOSFET is optional.
DocID025316 Rev 3
5/30
Pin configuration
2
LD39020
Pin configuration
Figure 2: Pin connection (top view)
Table 1: Pin description
6/30
Pin n° DFN1x1-4L
Pin n° SOT23-5L
Symbol
1
5
OUT
Output voltage
2
2
GND
Common ground
3
3
EN
Enable pin logic input: low = shutdown,
High = active
4
1
IN
Input voltage
Thermal pad
-
GND
-
4
NC
DocID025316 Rev 3
Function
Connect to GND on the PCB
Not connected
LD39020
3
Typical application
Typical application
Figure 3: Typical application circuits
DocID025316 Rev 3
7/30
Maximum ratings
4
LD39020
Maximum ratings
Table 2: Absolute maximum ratings
Symbol
VIN
Parameter
Value
Unit
- 0.3 to 7
V
- 0.3 to VIN + 0.3
V
- 0.3 to 7
V
Input voltage
VOUT
Output voltage
VEN
Enable input voltage
IOUT
Output current
Internally limited
mA
PD
Power dissipation
Internally limited
mW
TSTG
Storage temperature range
- 40 to 150
°C
TOP
Operating junction temperature range
- 40 to 125
°C
Absolute maximum ratings are those values beyond which damage to the device
may occur. Functional operation under these conditions is not implied. All values
are referred to GND.
Table 3: Thermal data
Symbol
Parameter
Value
Unit
RthJA
Thermal resistance junction-ambient, DFN1x1-4L
250
°C/W
RthJC
Thermal resistance junction-case, SOT23-5L
81
°C/W
RthJA
Thermal resistance junction-ambient, SOT23-5L
255
°C/W
Test conditions
Value
Unit
HBM
4
kV
MM
400
V
CDM
500
V
Table 4: ESD Performance
Symbol
ESD
8/30
Parameter
ESD Protection voltage
DocID025316 Rev 3
LD39020
5
Electrical characteristics
Electrical characteristics
TJ = 25 °C, VIN = VOUT(NOM) + 1 V , CIN = COUT = 1 µF, IOUT = 1 mA, VEN = VIN, unless
otherwise specified.
Table 5: Electrical characteristics for LD39020T, LD39020DT
Symbol
Parameter
VIN
Operating input
voltage
VOUT
VOUT accuracy
∆VOUT
∆VOUT
Static line
(1)
regulation
Static load
regulation
Test conditions
Min.
Max.
Unit
1.5
5.5
V
IOUT = 1 mA, TJ = 25 °C
-2
2
%
IOUT = 1 mA,-40 °C<TJ<125 °C
-3
3
%
VOUT(NOM) + 1 V ≤ VIN ≤ 5.5 V,
IOUT = 10 mA
Typ.
0.02
-40 °C<TJ<125 °C
0.2
IOUT = 0 mA to 200 mA
10
-40 °C<TJ<125 °C
35
IOUT = 200 mA, VOUT = 2.8 V
-40 °C<TJ<125 °C
200
10 Hz to 100 kHz, IOUT = 10 mA
45
VIN = VOUT(NOM)+ 1 V +/- VRIPPLE
VRIPPLE = 0.2 V Freq .=1 kHz
IOUT = 30 mA
80
VIN = VOUT(NOM)+ 1 V +/- VRIPPLE
VRIPPLE = 0.2 V Freq. = 100 kHz
IOUT = 30 mA
55
IOUT = 0 mA
20
IOUT = 200 mA
100
Standby Current
VIN input current in OFF MODE:
VEN = GND
0.03
ISC
Short circuit current
RL = 0
RON
Output voltage
discharge MOSFET
(only on LD39020DT)
Enable input logic
low
VIN = 1.5 V to 5.5 V
-40 °C<TJ<125 °C
Enable input logic
high
VIN = 1.5 V to 5.5 V
-40 °C<TJ<125 °C
Enable pin input
current
VEN = VIN
Dropout voltage
Output noise
voltage
eN
SVR
IQ
Supply voltage
rejection
Quiescent current
IStandby
VEN
IEN
(2)
TON
TSHDN
350
%/mA
mV
µVRM
S
dB
250
40
1
µA
µA
350
mA
100
Ω
0.4
V
1
100
Turn on time
100
Thermal shutdown
160
Hysteresis
20
DocID025316 Rev 3
mV
0.01
IOUT = 30 mA,VOUT = 2.8 V
VDROP
%/V
nA
µs
°C
9/30
Electrical characteristics
Symbol
COUT
LD39020
Parameter
Output capacitor
Test conditions
Min.
Capacitance (see Figure 17:
"Stability area vs (COUT, ESR)")
0.47
Typ.
Max.
Unit
22
µF
Notes:
(1)
Not applicable for Vout(nom) > 4.5 V
(2)
Turn-on time is time measured between the enable input just exceeding VEN high value and the output voltage
just reaching 95 % of its nominal value
TJ = 25 °C, VIN = VOUT(NOM) + 1 V , CIN = COUT = 1 µF, IOUT = 1 mA, VEN = VIN, unless
otherwise specified.
Table 6: Electrical characteristics for LD39020AT, LD39020ADT
Symbol
VIN
VOUT
∆VOUT
∆VOUT
Test conditions
Max.
Unit
1.5
5.5
V
IOUT = 1 mA, TJ = 25 °C
-0.5
0.5
%
IOUT = 1 mA,
-40 °C<TJ<125 °C
-1.5
1.5
%
Operating input
voltage
VOUT accuracy
Static line
(1)
regulation
Static load
regulation
Min.
VOUT(NOM) + 1 V ≤ VIN ≤ 5.5 V,
IOUT = 10 mA
Typ.
0.02
-40 °C<TJ<125 °C
IOUT = 0 mA to 200 mA
10
-40 °C<TJ<125 °C
IOUT = 200 mA, VOUT = 2.8 V
-40 °C<TJ<125 °C
200
10 Hz to 100 kHz, IOUT = 10 mA
45
VIN = VOUT(NOM)+ 1 V +/- VRIPPLE
VRIPPLE = 0.2 V Freq. = 1 kHz
IOUT = 30 mA
80
VIN = VOUT(NOM)+ 1 V +/- VRIPPLE
VRIPPLE = 0.2 V Freq. = 100 kHz
IOUT = 30 mA
55
IOUT = 0 mA
20
IOUT = 200 mA
100
Standby current
VIN input current in OFF MODE:
VEN = GND
0.03
ISC
Short circuit
current
RL = 0
RON
Output voltage
discharge
MOSFET
(only on LD39020ADT)
eN
SVR
IQ
IStandby
Output noise
voltage
Supply voltage
rejection
Quiescent
current
DocID025316 Rev 3
mV
0.01
35
Dropout voltage
%/V
0.2
IOUT = 30 mA,VOUT = 2.8 V
VDROP
10/30
Parameter
%/mA
mV
350
µVRM
S
dB
40
µA
250
1
µA
350
mA
100
Ω
LD39020
Electrical characteristics
Symbol
VEN
IEN
(2)
Parameter
Test conditions
Enable input
logic low
VIN = 1.5 V to 5.5 V
-40 °C<TJ<125 °C
Enable input
logic high
VIN = 1.5 V to 5.5 V
-40 °C<TJ<125 °C
Enable pin input
current
VEN = VIN
TON
Turn on time
TSHDN
Thermal
shutdown
Min.
Output capacitor
Max.
Unit
0.4
V
1
100
100
nA
µs
160
Hysteresis
COUT
Typ.
°C
20
Capacitance (see Figure 17:
"Stability area vs (COUT, ESR)")
0.47
22
µF
Notes:
(1)
Not applicable for Vout(nom) > 4.5 V
(2)
Turn-on time is time measured between the enable input just exceeding VEN high value and the output voltage
just reaching 95 % of its nominal value
DocID025316 Rev 3
11/30
Application information
LD39020
6
Application information
6.1
Soft start function
The LD39020 has an internal soft start circuit. By increasing the startup time up to 100µs,
without the need of any external soft start capacitor, this feature is able to keep the
regulator inrush current at startup under control.
6.2
Output discharge function
The LD39020 integrates a MOSFET connected between Vout and GND. This transistor is
activated when the EN pin goes to low logic level and has the function to quickly discharge
the output capacitor when the device is disabled by the user.
The device is available with or without auto-discharge feature.
See Table 10: "DFN1x1-4L order codes" for more details.
6.3
Input and output capacitors
The LD39020 requires external capacitors to assure the regulator control loop stability.
Any good quality ceramic capacitor can be used but, the X5R and the X7R are suggested
since they guarantee a very stable combination of capacitance and ESR overtemperature.
Locating the input/output capacitors as closer as possible to the relative pins is
recommended.
The LD39020 requires an input capacitor with a minimum value of 1 μF.
This capacitor must be located as closer as possible to the input pin of the device and
returned to a clean analog ground.
The control loop of the LD39020 is designed to work with an output ceramic capacitor.
This capacitor must meet the requirements of minimum capacitance and equivalent series
resistance (ESR), as shown in Fig17. To assure stability, the output capacitor must
maintain its ESR and capacitance in the stable region, over the full operating temperature
range.
The LD39020 shows stability with a minimum effective output capacitance of 220 nF.
However, to keep stability in all operating conditions (temperature, input voltage and load
variations), a minimum output capacitor of 0.47 µF is recommended.
The suggested combination of 1 μF input and output capacitors offers a good compromise
among the stability of the regulator, optimum transient response and total PCB area
occupation.
12/30
DocID025316 Rev 3
LD39020
Typical characteristics
(CIN = COUT = 1 µF, VEN to VIN, TJ = 25°C unless otherwise specified)
Figure 4: Output voltage vs. temperature
(IOUT = 1 mA)
Figure 5: Output voltage vs. temperature
(IOUT = 200 mA)
Figure 6: Line regulation vs. temperature
Figure 7: Load regulation vs. temperature
Load regulation
7
Typical characteristics
DocID025316 Rev 3
13/30
Typical characteristics
LD39020
Figure 8: Quiescent current vs. temperature
(IOUT = 0 mA)
Figure 9: Quiescent current vs. temperature
(IOUT = 200 mA)
Figure 10: Shutdown current vs. temperature
Figure 11: Quiescent current vs. load current
1
0.9
Quiescent current [µA]
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-40
-25
0
25
55
85
125
Temperature [°C]
V IN=4.3V, V EN=G N D
AM13861V1
Figure 12: Quiescent current vs. input voltage
Figure 13: Dropout voltage vs. temperature
275
250
Dropou t Voltage [mV]
225
Io ut = 30 m A
200
Io ut = 50 m A
175
Io ut = 10 0 mA
Io ut = 20 0 mA
150
125
100
75
50
25
0
-40
-25
0
25
55
85
125
Temperature [°C]
AM13864V1
14/30
DocID025316 Rev 3
LD39020
Typical characteristics
Figure 14: Supply voltage rejection vs. frequency
Figure 15: Supply voltage rejection vs. input voltage
100
Io ut = 1mA
90
Io ut = 30 m A
Io ut = 10 0 mA
80
Io ut = 20 0 mA
SVR [dB]
70
60
50
40
30
20
10
0
100
1000
10000
100000
1000000
Frequency [Hz]
VIN=2V +/- 200mV, VOUT= 1V, COUT =1µF
AM13865V1
Figure 16: Output noise spectral density
Figure 17: Stability area vs. (COUT, ESR)
Figure 18: Enable startup (VOUT = 1 V)
Figure 19: Enable startup (VOUT = 5 V)
V EN
V EN
V OUT
V OUT
IOUT
IOUT
V IN =2V, V EN =0V to V IN, I OUT=0.2 A
, V OUT=1 V, T r =5µ s
V IN=5.5 V, V EN=0V to 2V, I OUT=0.2 A
AM13869V1
DocID025316 Rev 3
, V OUT=5V, Tr =5µs
AM13870V1
15/30
Typical characteristics
LD39020
Figure 20: Turn-on time (VOUT = 1 V)
Figure 21: Turn-off time (VOUT = 1 V)
V IN
V IN
V OUT
V OUT
IOUT
IOUT
V IN = V EN = from 0V to 5.5 V, I
OUT = 0.2
A
V IN = V EN = from 5.5 V to 0 V, I OUT = 0.2 A , V OUT= 1 V, T f = 5µ s
, V OUT = 1 V, T r = 5µ s
AM13872V1
AM13871V1
Figure 22: Turn-on time (VOUT = 5 V)
Figure 23: Turn-off time (VOUT = 5 V)
V IN
V IN
V OUT
IOUT
V OUT
IOUT
V IN=V EN= from 0V to 5.5V, I
OUT=0.2A
V IN = V EN = from 5.5 V to 0V, I OUT = 0.2 A , V OUT= 5V, T f = 5µ s
, V OUT=5V, Tr =5µs
AM13873V1
AM13874V1
Figure 24: Line transient (VOUT = 1 V)
Figure 25: Line transient (VOUT = 5 V)
V IN
V IN
V OUT
V OUT
V IN = V EN =from 2V to 3V , I
OUT=10 mA
, V OUT= 1 V, T r =T f =5µ s
V IN= V EN= from 5.1V to 5.5V , I
AM13875V1
16/30
DocID025316 Rev 3
OUT= 10 m A
, V OUT= 5 V, T r = T f = 5µ s
AM13876V1
LD39020
Typical characteristics
Figure 26: Load transient (VOUT = 1 V)
Figure 27: Load transient (VOUT = 5 V)
I O UT
I O UT
V O UT
V O UT
V IN=V EN=2 V, I OUT= from 0 to 0.2 A , V OUT= 1 V, t r =t f =5µ s
V IN=V EN=5.5 V, I OUT= from 0 to 0.2 A , V OUT= 5 V, t r =t f =5µ s
AM13877V1
DocID025316 Rev 3
AM13878V1
17/30
Package information
8
LD39020
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance.
ECOPACK® specifications, grade definitions and product status are available at:
www.st.com. ECOPACK® is an ST trademark.
18/30
DocID025316 Rev 3
LD39020
8.1
Package information
DFN4 1x1-4L package information
Figure 28: DFN 1x1-4L package outline
DocID025316 Rev 3
19/30
Package information
LD39020
Table 7: DFN 1x1-4L mechanical data
mm.
Dim.
Min.
Typ.
Max.
A
0.34
0.37
0.40
A1
0
0.02
0.05
A3
0.10
b
0.17
0.22
0.27
D
0.95
1.00
1.05
D2
0.43
0.48
0.53
E
0.95
1.00
1.05
E2
0.43
0.48
0.53
e
20/30
0.65
L
0.20
K
0.15
DocID025316 Rev 3
0.25
0.30
LD39020
Package information
Figure 29: DFN 1x1-4L recommended footprint
DocID025316 Rev 3
21/30
Package information
8.2
LD39020
SOT23-5L package information
Figure 30: SOT23-5L package outline
Table 8: SOT23-5L mechanical data
mm
Dim.
Min.
22/30
Typ.
Max.
A
0.90
1.45
A1
0
0.15
A2
0.90
1.30
b
0.30
0.50
c
0.09
0.20
D
2.95
E
1.60
e
0.95
H
2.80
L
0.30
0.60
θ
0°
8°
DocID025316 Rev 3
LD39020
Package information
Figure 31: SOT23-5L recommended footprint
Dimensions are in mm.
DocID025316 Rev 3
23/30
Package information
8.3
LD39020
SOT23-5L packing information
Figure 32: SOT23-5L tape and reel outline
D
A
N
T
Po
Bo
Ko
Ao
P
Table 9: SOT23-5L tape and reel mechanical data
Dim.
mm
Min.
Typ.
A
180
C
12.8
D
20.2
N
60
13.0
T
24/30
Max.
13.2
14.4
Ao
3.13
3.23
3.33
Bo
3.07
3.17
3.27
Ko
1.27
1.37
1.47
Po
3.9
4.0
4.1
P
3.9
4.0
4.1
DocID025316 Rev 3
LD39020
9
Order code
Order code
Table 10: DFN1x1-4L order code
Order code
Output voltage (V)
LD39020ADTPU08R
Auto-discharge
(1)
Tolerance (%)
Marking
0.5
A1
2
08
0.5
B1
2
C1
0.5
A2
2
95
0.5
B2
2
C2
0.5
A3
2
10
0.5
B3
2
C3
0.5
A4
2
11
0.5
B4
2
C4
0.5
A5
2
12
0.5
B5
2
C5
0.5
AP
2
13
0.5
BP
2
CP
0.5
A6
2
15
0.5
B6
2
C6
0.5
A7
2
18
0.5
B7
2
C7
Yes
LD39020DTPU08R
LD39020ATPU08R
LD39020TPU08R
0.8
(1)
No
(1)
LD39020ADTPU095R
(1)
Yes
LD39020DTPU095R
LD39020ATPU095R
LD39020TPU095R
(1)
0.95
No
(1)
LD39020ADTPU10R
(1)
Yes
LD39020DTPU10R
LD39020ATPU10R
LD39020TPU10R
(1)
1
No
(1)
LD39020ADTPU11R
(1)
Yes
LD39020DTPU11R
LD39020ATPU11R
LD39020TPU11R
(1)
1.1
No
(1)
LD39020ADTPU12R
(1)
Yes
LD39020DTPU12R
LD39020ATPU12R
LD39020TPU12R
(1)
1.2
No
(1)
LD39020ADTPU13R
Yes
LD39020DTPU13R
LD39020ATPU13R
LD39020TPU13R
(1)
1.3
No
(1)
LD39020ADTPU15R
(1)
Yes
LD39020DTPU15R
LD39020ATPU15R
LD39020TPU15R
(1)
1.5
No
(1)
(1)
LD39020ADTPU18R
Yes
LD39020DTPU18R
LD39020ATPU18R
LD39020TPU18R
(1)
1.8
No
(1)
DocID025316 Rev 3
25/30
Order code
LD39020
Order code
Output voltage (V)
LD39020ADTPU185R
LD39020DTPU185R
LD39020ATPU185R
LD39020TPU185R
Auto-discharge
(1)
0.5
AR
2
85
0.5
BR
2
CR
0.5
A8
2
20
0.5
B8
2
C8
0.5
A9
2
21
0.5
B9
2
C9
0.5
AA
2
25
0.5
BA
2
CA
0.5
AB
2
27
0.5
BB
2
CB
0.5
AC
2
28
0.5
BC
2
CC
0.5
AD
2
85
0.5
BD
2
CD
0.5
AE
2
29
0.5
BE
2
CE
0.5
AF
2
30
0.5
BF
2
CF
1.85
No
(1)
LD39020ADTPU20R
Marking
Yes
(1)
(1)
Tolerance (%)
(1)
Yes
LD39020DTPU20R
LD39020ATPU20R
LD39020TPU20R
2
(1)
No
(1)
LD39020ADTPU21R
(1)
Yes
LD39020DTPU21R
LD39020ATPU21R
LD39020TPU21R
2.1
(1)
No
(1)
LD39020ADTPU25R
(1)
Yes
LD39020DTPU25R
LD39020ATPU25R
LD39020TPU25R
2.5
(1)
No
(1)
LD39020ADTPU27R
(1)
Yes
LD39020DTPU27R
LD39020ATPU27R
LD39020TPU27R
2.7
(1)
No
(1)
LD39020ADTPU28R
(1)
Yes
LD39020DTPU28R
LD39020ATPU28R
LD39020TPU28R
2.8
(1)
No
(1)
LD39020ADTPU285R
(1)
Yes
LD39020DTPU285R
LD39020ATPU285R
LD39020TPU285R
(1)
2.85
No
(1)
LD39020ADTPU29R
(1)
Yes
LD39020DTPU29R
LD39020ATPU29R
LD39020TPU29R
(1)
2.9
No
(1)
LD39020ADTPU30R
(1)
Yes
LD39020DTPU30R
LD39020ATPU30R
LD39020TPU30R
26/30
(1)
3
No
(1)
DocID025316 Rev 3
LD39020
Order code
Order code
Output voltage (V)
LD39020ADTPU31R
Auto-discharge
(1)
Tolerance (%)
Marking
0.5
AG
2
31
0.5
BG
2
CG
0.5
AH
2
32
0.5
BH
2
CH
0.5
AJ
2
33
0.5
BJ
2
CJ
0.5
AK
2
36
0.5
BK
2
CK
0.5
AL
2
40
0.5
BL
2
CL
0.5
AM
2
47
0.5
BM
2
CM
0.5
AN
2
50
0.5
BN
2
CN
Yes
LD39020DTPU31R
LD39020ATPU31R
LD39020TPU31R
(1)
No
(1)
LD39020ADTPU32R
LD39020DTPU32R
LD39020ATPU32R
LD39020TPU32R
3.1
(1)
Yes
(1)
(1)
3.2
No
(1)
LD39020ADTPU33R
(1)
Yes
LD39020DTPU33R
LD39020ATPU33R
LD39020TPU33R
(1)
3.3
No
(1)
LD39020ADTPU36R
(1)
Yes
LD39020DTPU36R
LD39020ATPU36R
LD39020TPU36R
(1)
3.6
No
(1)
LD39020ADTPU40R
(1)
Yes
LD39020DTPU40R
LD39020ATPU40R
LD39020TPU40R
(1)
4
No
(1)
LD39020ADTPU47R
(1)
Yes
LD39020DTPU47R
LD39020ATPU47R
LD39020TPU47R
(1)
4.7
No
(1)
LD39020ADTPU50R
(1)
Yes
LD39020DTPU50R
LD39020ATPU50R
LD39020TPU50R
(1)
5
No
(1)
Notes:
(1)
Available on request.
DocID025316 Rev 3
27/30
Order code
LD39020
Table 11: SOT23-5L order code
Order code
LD39020ADM30R
Output voltage (V)
(1)
Auto-discharge
3.0
Notes:
(1)
28/30
Available on request.
DocID025316 Rev 3
Yes
Tolerance (%)
0.5
Marking
AD30
LD39020
10
Revision history
Revision history
Table 12: Document revision history
Date
Revision
04-Dec-2013
1
Initial release.
02-Apr-2014
2
Updated Table 10: "DFN1x1-4L order codes".
3
Added SOT23-5L package. Modified features and description in
cover page. Updated Section 7: "Pin configuration" and Table 3:
"Thermal data". Added Section 13.2: "SOT23-5L package
information" and Section 13.3: "SOT23-5L packing information".
Minor text changes.
15-Jun-2015
Changes
DocID025316 Rev 3
29/30
LD39020
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2015 STMicroelectronics – All rights reserved
30/30
DocID025316 Rev 3
Similar pages