PSEMI EK42412-02 Sp12t rf switch, 10 mhzâ 8 ghz Datasheet

PE42412
Document Category: Product Specification
UltraCMOS® SP12T RF Switch, 10 MHz–8 GHz
Features
Figure 1 • PE42412 Functional Diagram
• High isolation: 39 dB @ 6 GHz
• Low insertion loss: 1.3 dB @ 6 GHz
RFC
• Fast switching time of 232 ns
• Power handling of 33 dBm CW
• Logic select (LS) pin provides maximum control
logic flexibility
• Terminated all-off state mode
• Packaging – 32-lead 5 × 5 × 0.85 mm QFN
Applications
• Wireless infrastructure
• Wireless applications up to 8 GHz
RF1
RF12
RF2
RF11
RF3
RF10
RF4
RF9
RF5
RF8
RF6
RF7
CMOS Control
Driver and ESD
• Filter bank switching
• RF signal routing
switch
configuration
V1 V2 V3 V4
50Ω
Product Description
The PE42412 is a HaRP™ technology-enhanced absorptive SP12T RF switch that supports a frequency range
from 10 MHz to 8 GHz. It delivers high isolation, low insertion loss and fast switching time, making this device
ideal for filter bank switching and RF signal routing in wireless infrastructure and wireless applications up to
8 GHz. No blocking capacitors are required if DC voltage is not present on the RF ports.
The PE42412 is manufactured on Peregrine’s UltraCMOS® process, a patented advanced form of silicon-oninsulator (SOI) technology.
Peregrine’s HaRP technology enhancements deliver high linearity and excellent harmonics performance. It is an
innovative feature of the UltraCMOS process, offering the performance of GaAs with the economy and
integration of conventional CMOS.
©2017, Peregrine Semiconductor Corporation. All rights reserved. • Headquarters: 9380 Carroll Park Drive, San Diego, CA, 92121
Product Specification
DOC-75868-3 – (03/2017)
www.psemi.com
PE42412
SP12T RF Switch
Absolute Maximum Ratings
Exceeding absolute maximum ratings listed in Table 1 may cause permanent damage. Operation should be
restricted to the limits in Table 2. Operation between operating range maximum and absolute maximum for
extended periods may reduce reliability.
ESD Precautions
When handling this UltraCMOS device, observe the same precautions as with any other ESD-sensitive devices.
Although this device contains circuitry to protect it from damage due to ESD, precautions should be taken to
avoid exceeding the rating specified in Table 1.
Latch-up Immunity
Unlike conventional CMOS devices, UltraCMOS devices are immune to latch-up.
Table 1 • Absolute Maximum Ratings for PE42412
Parameter/Condition
Min
Max
Unit
Supply voltage, VDD
–0.3
5.5
V
Digital input voltage (V1, V2, V3, V4, LS)
–0.3
3.6
V
RF input power (RFC–RFX, 50Ω)
See Figure 2
dBm
RF input power into terminated ports, CW(1) (RFX, 50Ω)
See Figure 2
dBm
+150
°C
+150
°C
ESD voltage HBM, all pins(2)
1000
V
ESD voltage CDM, all pins(3)
1000
V
Maximum junction temperature
Storage temperature range
–65
Notes:
1) 100% duty cycle, all bands, 50Ω.
2) Human body model (MIL-STD 883 Method 3015).
3) Charged device model (JEDEC JESD22-C101).
Page 2
DOC-75868-3 – (03/2017)
www.psemi.com
PE42412
SP12T RF Switch
Recommended Operating Conditions
Table 2 lists the recommended operating conditions for the PE42412. Devices should not be operated outside
the recommended operating conditions listed below.
Table 2 • Recommended Operating Conditions for PE42412
Parameter
Supply voltage, VDD
Min
Typ
Max
Unit
2.3
3.3
5.5
V
120
200
µA
Supply current, IDD
Digital input high (V1, V2, V3, V4, LS)
1.17
3.6
V
Digital input low (V1, V2, V3, V4, LS)
–0.3
0.6
V
5
10
µA
µA
RF input power, CW (RFC–RFX)(1)
See Figure 2
dBm
RF input power, pulsed (RFC–RFX)(2)
See Figure 2
dBm
RF input power into terminated ports, CW (RFX)(1)
See Figure 2
dBm
+105
°C
Digital input current
V1, V2, V3, V4
LS
Operating temperature range
–40
+25
Notes:
1) 100% duty cycle, all bands, 50Ω.
2) Pulsed, 5% duty cycle of 4620 µs period, 50Ω.
DOC-75868-3 – (03/2017)
Page 3
www.psemi.com
PE42412
SP12T RF Switch
Electrical Specifications
Table 3 provides the PE42412 key electrical specifications at +25 °C,VDD = 3.3V (ZS = ZL = 50Ω), unless
otherwise specified.
Table 3 • PE42412 Electrical Specifications
Parameter
Path
Condition
Operating frequency
Min
Typ
10 MHz
Max
Unit
8 GHz
As shown
RFC–RF1/12
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
0.7
0.8
0.9
1.1
1.3
2.4
0.9
1.0
1.1
1.4
1.6
3.0
dB
dB
dB
dB
dB
dB
RFC–RF2/11
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
0.8
0.9
1.0
1.2
1.4
1.7
1.0
1.1
1.3
1.5
1.8
2.0
dB
dB
dB
dB
dB
dB
RFC–RF3/10
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
0.8
0.9
1.1
1.3
1.4
1.4
1.0
1.1
1.3
1.5
1.8
1.7
dB
dB
dB
dB
dB
dB
RFC–RF4/9
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
0.9
1.1
1.2
1.4
1.6
2.3
1.1
1.3
1.5
1.7
1.9
2.7
dB
dB
dB
dB
dB
dB
RFC–RF5/8
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
1.0
1.1
1.3
1.5
1.6
2.1
1.2
1.3
1.6
1.8
1.9
2.5
dB
dB
dB
dB
dB
dB
RFC–RF6/7
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
1.0
1.1
1.4
1.7
1.7
2.4
1.2
1.3
1.7
2.0
2.1
3.1
dB
dB
dB
dB
dB
dB
Insertion loss(1)
Page 4
DOC-75868-3 – (03/2017)
www.psemi.com
PE42412
SP12T RF Switch
Table 3 • PE42412 Electrical Specifications (Cont.)
Parameter
Path
Min
Typ
RFC–RF1/12
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
60
42
36
31
26
19
63
44
38
33
28
22
dB
dB
dB
dB
dB
dB
RFC–RF2/11
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
63
47
40
34
30
25
66
49
43
38
33
27
dB
dB
dB
dB
dB
dB
RFC–RF3/10
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
62
48
41
34
30
28
66
50
44
37
33
30
dB
dB
dB
dB
dB
dB
RFC–RF4/9
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
63
50
43
36
31
28
67
52
46
39
34
30
dB
dB
dB
dB
dB
dB
RFC–RF5/8
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
64
56
48
40
33
31
69
60
54
45
37
33
dB
dB
dB
dB
dB
dB
RFC–RF6/7
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
64
55
47
36
32
31
69
57
52
43
39
37
dB
dB
dB
dB
dB
dB
Isolation(1)
Condition
DOC-75868-3 – (03/2017)
Max
Unit
Page 5
www.psemi.com
PE42412
SP12T RF Switch
Table 3 • PE42412 Electrical Specifications (Cont.)
Parameter
Path
Condition
Min
Typ
Max
Unit
RFC–RF1/12
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
25
23
17
16
16
10
dB
dB
dB
dB
dB
dB
RFC–RF2/11
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
24
21
14
14
12
21
dB
dB
dB
dB
dB
dB
RFC–RF3/10
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
24
20
14
13
11
16
dB
dB
dB
dB
dB
dB
RFC–RF4/9
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
24
20
15
14
13
15
dB
dB
dB
dB
dB
dB
RFC–RF5/8
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
23
19
13
13
12
14
dB
dB
dB
dB
dB
dB
RFC–RF6/7
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
23
18
12
12
11
11
dB
dB
dB
dB
dB
dB
Return loss
(active port)
Page 6
DOC-75868-3 – (03/2017)
www.psemi.com
PE42412
SP12T RF Switch
Table 3 • PE42412 Electrical Specifications (Cont.)
Parameter
Path
Condition
Min
Typ
Max
Unit
RFC–RF1/12
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
25
23
17
17
17
9
dB
dB
dB
dB
dB
dB
RFC–RF2/11
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
24
21
15
15
13
15
dB
dB
dB
dB
dB
dB
RFC–RF3/10
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
24
20
14
14
11
17
dB
dB
dB
dB
dB
dB
RFC–RF4/9
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
24
21
15
15
13
10
dB
dB
dB
dB
dB
dB
RFC–RF5/8
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
23
19
14
14
13
11
dB
dB
dB
dB
dB
dB
RFC–RF6/7
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
23
18
13
13
13
11
dB
dB
dB
dB
dB
dB
Return loss (RFC port)
DOC-75868-3 – (03/2017)
Page 7
www.psemi.com
PE42412
SP12T RF Switch
Table 3 • PE42412 Electrical Specifications (Cont.)
Parameter
Path
Condition
Min
Typ
Max
Unit
RF1/12
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
16
15
15
17
20
15
dB
dB
dB
dB
dB
dB
RF2/11
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
16
16
16
17
20
14
dB
dB
dB
dB
dB
dB
RF3/10
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
16
16
16
17
20
17
dB
dB
dB
dB
dB
dB
RF4/9
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
16
15
15
17
19
18
dB
dB
dB
dB
dB
dB
RF5/8
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
16
16
16
17
20
16
dB
dB
dB
dB
dB
dB
RF6/7
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
16
16
15
17
17
11
dB
dB
dB
dB
dB
dB
Return loss (terminated
port)
Page 8
DOC-75868-3 – (03/2017)
www.psemi.com
PE42412
SP12T RF Switch
Table 3 • PE42412 Electrical Specifications (Cont.)
Parameter
Relative insertion
phase(2)
Path
Condition
Min
Typ
Max
Unit
RF2–RF1
(RF11–RF12)
1 GHz
2 GHz
4 GHz
6 GHz
8 GHz
–3.3
–6.1
–10.3
–10.9
–10.5
–2.7
–5.0
–8.1
–7.5
–5.3
–2.1
–3.8
–5.9
–4.0
–0.1
Deg
Deg
Deg
Deg
Deg
RF3–RF1
(RF10–RF12)
1 GHz
2 GHz
4 GHz
6 GHz
8 GHz
–4.0
–7.2
–11.7
–11.6
–9.4
–3.3
–5.9
–9.1
–7.4
–3.9
–2.6
–4.6
–6.5
–3.2
1.7
Deg
Deg
Deg
Deg
Deg
RF4–RF1
(RF9–RF12)
1 GHz
2 GHz
4 GHz
6 GHz
8 GHz
–6.9
–12.4
–23.1
–31.4
–35.8
–5.8
–10.8
–19.3
–25.6
–27.9
–4.7
–9.2
–15.5
–19.8
–20.1
Deg
Deg
Deg
Deg
Deg
RF5–RF1
(RF8–RF12)
1 GHz
2 GHz
4 GHz
6 GHz
8 GHz
–8.8
–15.6
–28.2
–39.2
–44.9
–7.2
–13.5
–24.5
–33.2
–37.8
–5.7
–11.4
–20.7
–27.2
–30.6
Deg
Deg
Deg
Deg
Deg
RF6–RF1
(RF7–RF12)
1 GHz
2 GHz
4 GHz
6 GHz
8 GHz
–11.0
–19.6
–35.0
–50.6
–61.3
–9.1
–17.0
–30.7
–41.7
–49.7
–7.3
–14.4
–26.5
–32.7
–38.2
Deg
Deg
Deg
Deg
Deg
Input 1dB compression
point(3)
RFC–RFX
See
Figure 2
dBm
Input 0.1dB compression
point(3)
RFC–RFX
See
Figure 2
dBm
Input IP2
RFC–RFX
100 MHz–8 GHz
105
dBm
Input IP3
RFC–RFX
100 MHz–8 GHz
60
dBm
RF TRISE/TFALL
10%/90% RF
100
130
ns
Settling time
50% CTRL to 0.05 dB final value
870
1400
ns
Switching time
50% CTRL to 90% or 10% of RF
232
300
ns
Notes:
1) Insertion loss and isolation performance can be improved by a good RF ground on the LS pin (pin 32).
2) Defined with S-parameters, relative insertion phase (RFX–RF1) = ∠S(x+1)1 – ∠S21, where incident Port-1 is RFC, response Port-2 = RF1, and
response Port-(x+1) = RFx.
3) The input 1dB and 0.1dB compression points are linearity figures of merit. Refer to Table 2 for the RF input power (50Ω).
DOC-75868-3 – (03/2017)
Page 9
www.psemi.com
PE42412
SP12T RF Switch
Switching Frequency
Thermal Data
The PE42412 has a maximum 25 kHz switching
frequency. Switching frequency describes the time
duration between switching events. Switching time is
the time duration between the point the control signal
reached 50% of the final value and the point the
output signal reaches within 10% or 90% of its target
value.
Psi-JT (ΨJT), junction top-of-package, is a thermal
metric to estimate junction temperature of a device on
the customer application PCB (JEDEC JESD51-2).
Spurious Performance
ΨJT = (TJ – TT)/P
where
ΨJT = junction-to-top of package characterization
parameter, °C/W
The PE42412 spur fundamental occurs around
5 MHz. Its typical performance is –162 dBm/Hz, with
45 kHz bandwidth.
TJ = die junction temperature, °C
Hot-Switching Capability
P = power dissipated by device, Watts
The maximum hot switching capability of the PE42412
is 20 dBm above 100 MHz. Hot switching occurs
when RF power is applied while switching between
RF ports.
Table 4 • Thermal Data for PE42412
TT = package temperature (top surface, in the
center), °C
Parameter
Typ Unit
ΨJT
20
°C/W
ΘJA, junction-to-ambient thermal resistance
58
°C/W
Page 10
DOC-75868-3 – (03/2017)
www.psemi.com
PE42412
SP12T RF Switch
Control Logic
Table 5 provides the control logic truth table for PE42412.
Table 5 • Truth Table for PE42412
LS(1) V4 V3 V2 V1
RFC– RFC– RFC– RFC– RFC– RFC– RFC– RFC– RFC– RFC– RFC– RFC–
RF1 RF2 RF3 RF4 RF5 RF6 RF7 RF8 RF9 RF10 RF11 RF12
0
0
0
0
0
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
0
1
0
0
0
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
0
0
1
0
0
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
0
1
1
0
0
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
0
0
0
1
0
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
0
1
0
1
0
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
0
0
1
1
0
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
0
1
1
1
0
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
0
0
0
0
1
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
0
1
0
0
1
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
0
0
1
0
1
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
0
1
1
0
1
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
1
1
1
0
1
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
1
0
1
0
1
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
1
1
0
0
1
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
1
0
0
0
1
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
1
1
1
1
0
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
1
0
1
1
0
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
1
1
0
1
0
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
1
0
0
1
0
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
1
1
1
0
0
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
1
0
1
0
0
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
1
1
0
0
0
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
1
0
0
0
0
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
X(2)
0
0
1
1
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Notes:
1) LS has an internal 1 MΩ pull-up resistor to logic high. Connect LS to GND externally to generate a logic 0. Leaving LS floating will generate a
logic 1.
2) LS = don’t care, V4 = 0, V3 = 0, V2 = V1 = 1, all ports are terminated to provide an all isolated state.
DOC-75868-3 – (03/2017)
Page 11
www.psemi.com
PE42412
SP12T RF Switch
Power De-rating Curve
Figure 2 shows the power de-rating curve showing P1dB compression, P0.1dB compression, maximum RF
input power (pulsed), maximum RF input power (CW), absolute maximum RF terminated power (CW), and
maximum RF terminated power (CW).
Figure 2 • Power De-rating Curve, 10 MHz–8 GHz, –40 °C to +105 °C Ambient, 50Ω
P1dB Compression @ 25 °C Ambient/Abs. Max. RF Input Power
P0.1dB Compression @ 25 °C
Max. RF Input Power, Pulsed
Max. RF Input Power, CW
Abs. Max. RF Terminated Power, CW
Max. RF Terminated Power, CW
Input Power (dBm)
45
40
35
30
25
20
15
10
5
10
100
1000
10000
Frequency (MHz)
Page 12
DOC-75868-3 – (03/2017)
www.psemi.com
PE42412
SP12T RF Switch
Isolation Matrix
Table 6 provides RFC-to-port isolation and Table 7 provides port-to-port isolation at +25 °C, VDD = 3.3V
(ZS = ZL = 50Ω).
Table 6 • RFC-to-Port Isolation
Isolation (dB)
“ON”
Port
Frequency
RF1
RF2
RF3
RF4
RF5
RF6
RF7
RF8
RF1
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
–
–
–
–
–
–
70
67
51
41
33
27
68
54
48
41
34
30
87
63
57
50
44
40
87
65
58
51
45
41
87
66
59
49
44
44
91
76
67
55
53
49
93
75
68
61
59
54
89
72
65
59
55
51
88
64
58
52
48
44
83
61
55
51
47
44
75
53
48
43
39
36
RF2
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
67
51
44
35
28
23
–
–
–
–
–
–
71
66
54
44
36
32
91
76
64
55
47
43
90
68
62
54
48
44
88
68
61
50
46
46
93
76
67
56
54
49
91
74
68
61
59
55
90
71
64
59
55
51
86
63
57
52
47
44
81
60
54
50
47
44
74
52
47
43
40
37
RF3
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
64
45
40
34
31
28
67
52
47
42
37
31
–
–
–
–
–
–
80
58
51
44
39
35
91
80
69
59
51
46
93
69
63
52
48
48
92
76
66
55
54
49
90
74
68
61
60
56
89
70
64
58
55
52
86
63
57
51
47
44
80
59
53
50
47
45
73
51
46
43
40
39
RF4
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
63
44
39
34
32
29
66
50
45
39
35
32
67
53
47
41
36
33
–
–
–
–
–
–
70
68
69
54
42
37
69
57
52
43
39
37
91
75
65
54
52
47
89
74
67
60
60
56
90
69
63
57
55
52
85
63
57
51
48
45
80
59
53
49
47
46
73
51
46
43
40
39
RF5
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
63
44
38
33
31
29
66
50
44
38
35
32
67
51
45
38
34
31
68
55
50
43
36
33
–
–
–
–
–
–
70
67
60
49
42
37
92
76
66
54
51
46
92
73
67
60
59
54
90
69
63
57
55
52
85
62
56
51
47
45
81
59
53
50
47
46
73
51
46
43
40
39
RF6
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
63
44
38
33
31
29
66
49
43
38
34
31
66
50
44
37
33
30
67
52
46
39
34
30
69
60
54
45
37
33
–
–
–
–
–
–
91
70
60
46
44
39
92
75
67
58
57
51
87
70
63
56
53
50
85
63
56
50
47
45
80
59
53
49
47
45
74
51
46
42
40
38
DOC-75868-3 – (03/2017)
RF9 RF10 RF11 RF12
Page 13
www.psemi.com
PE42412
SP12T RF Switch
Table 6 • RFC-to-Port Isolation (Cont.)
Isolation (dB)
“ON”
Port
Frequency
RF1
RF2
RF3
RF4
RF5
RF6
RF7
RF8
RF7
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
69
47
42
37
34
31
79
57
51
45
42
38
85
62
56
49
46
43
92
69
63
55
53
49
92
74
67
57
56
52
91
71
61
49
45
42
–
–
–
–
–
–
69
63
57
46
38
34
67
53
46
39
34
31
66
51
44
38
33
30
67
50
45
39
35
33
65
47
41
37
34
33
RF8
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
69
47
42
37
34
31
79
57
51
45
43
38
83
62
56
49
46
43
92
68
62
56
53
50
89
72
66
59
57
54
92
80
70
55
50
50
70
65
57
48
42
38
–
–
–
–
–
–
68
57
52
44
37
33
67
51
45
39
34
31
66
51
45
39
35
33
65
47
42
37
34
34
RF9
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
69
47
41
36
34
32
79
57
51
45
43
38
83
62
56
50
46
44
91
69
62
56
54
51
91
72
66
59
57
54
91
77
69
55
51
49
69
59
53
45
42
39
70
68
65
53
42
37
–
–
–
–
–
–
68
54
48
42
37
33
67
52
46
40
36
34
65
47
42
37
35
34
RF10
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
69
47
42
37
34
31
79
57
51
46
43
38
83
62
56
50
46
43
92
69
63
57
54
51
91
73
66
59
57
54
92
76
69
55
52
51
93
71
64
53
53
50
91
84
69
59
52
46
78
56
50
43
38
34
–
–
–
–
–
–
68
55
50
42
37
34
66
49
43
37
33
32
RF11
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
69
48
42
36
34
31
79
58
51
45
43
38
87
62
56
50
46
43
91
70
63
57
54
50
91
73
67
59
57
54
93
76
69
55
51
51
88
69
61
51
51
48
88
70
63
54
49
45
91
76
63
54
48
44
71
64
53
45
37
32
–
–
–
–
–
–
69
59
44
35
32
30
RF12
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
70
48
42
36
33
30
80
59
52
46
43
37
86
63
57
50
46
43
90
71
64
57
53
50
89
74
67
59
57
53
94
77
70
56
51
50
87
67
59
50
49
46
88
66
59
51
46
42
86
64
58
50
45
41
68
55
48
40
34
30
70
60
48
40
36
33
–
–
–
–
–
–
Page 14
RF9 RF10 RF11 RF12
DOC-75868-3 – (03/2017)
www.psemi.com
PE42412
SP12T RF Switch
Table 7 • Port-to-Port Isolation
Isolation (dB)
“ON”
Port
Frequency
RF1
RF2
RF3
RF4
RF5
RF6
RF7
RF8
RF1
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
–
–
–
–
–
–
63
44
38
32
28
23
67
50
44
37
32
28
81
59
53
47
43
38
84
63
56
49
45
41
85
64
57
48
44
43
91
79
68
56
53
49
90
79
72
64
63
58
90
78
70
62
59
54
87
70
63
55
50
46
91
74
62
52
48
44
87
66
58
49
44
40
RF2
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
63
44
38
33
29
23
–
–
–
–
–
–
62
42
37
31
27
24
76
54
48
43
39
36
82
60
54
48
44
41
83
62
56
48
44
44
92
80
68
56
54
50
92
80
74
65
65
58
91
80
73
65
61
56
91
72
65
57
52
47
90
77
63
55
51
48
93
77
62
54
49
44
RF3
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
68
54
48
42
36
30
65
47
41
36
32
29
–
–
–
–
–
–
68
46
40
36
32
29
78
56
50
45
41
38
81
60
54
47
44
43
90
80
69
56
54
50
92
81
75
67
65
59
92
83
75
66
63
58
90
74
67
58
52
48
91
73
63
56
54
51
91
71
61
56
52
50
RF4
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
69
57
52
45
38
32
68
54
48
42
37
33
64
46
40
35
32
31
–
–
–
–
–
–
63
44
38
33
29
26
67
50
44
38
34
33
90
78
67
54
52
48
90
82
73
65
65
60
93
83
74
66
62
58
90
76
67
58
52
49
91
72
63
56
54
53
88
70
60
56
53
52
RF5
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
70
58
54
46
37
33
69
57
51
44
37
34
67
51
45
39
34
32
63
45
39
34
31
30
–
–
–
–
–
–
63
45
39
34
31
29
88
74
65
53
53
50
89
81
72
65
64
59
90
83
74
65
62
58
89
76
68
58
53
49
91
72
63
56
54
51
87
69
60
56
53
51
RF6
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
69
59
55
46
37
33
69
58
52
44
37
34
68
53
47
40
35
32
67
50
44
38
34
32
64
46
41
36
33
32
–
–
–
–
–
–
85
65
58
45
45
43
91
76
69
60
60
56
91
81
72
63
60
56
91
76
67
57
52
48
89
72
63
55
53
50
88
69
60
55
52
49
DOC-75868-3 – (03/2017)
RF9 RF10 RF11 RF12
Page 15
www.psemi.com
PE42412
SP12T RF Switch
Table 7 • Port-to-Port Isolation (Cont.)
Isolation (dB)
“ON”
Port
Frequency
RF1
RF2
RF3
RF4
RF5
RF6
RF7
RF8
RF7
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
81
60
52
46
41
38
88
69
59
53
46
42
92
78
68
58
53
48
93
81
71
62
60
57
89
75
68
60
59
58
86
64
57
45
45
46
–
–
–
–
–
–
64
46
41
36
34
33
67
50
44
38
34
33
68
52
46
40
35
33
69
57
50
42
37
34
68
55
49
40
35
32
RF8
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
81
60
52
46
41
37
88
68
59
53
46
41
90
78
69
60
53
48
90
83
74
66
61
57
89
79
73
65
62
59
90
74
67
53
53
52
63
45
40
34
32
30
–
–
–
–
–
–
63
44
39
34
31
30
67
51
45
39
34
32
69
56
50
42
37
34
68
54
48
41
35
33
RF9
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
81
60
52
46
41
37
89
68
59
53
46
41
89
79
69
60
53
48
91
82
74
66
61
56
92
81
73
65
62
58
94
77
70
55
52
50
67
51
45
38
36
34
63
44
38
33
29
26
–
–
–
–
–
–
64
46
40
35
32
31
68
53
47
41
37
35
68
53
47
40
36
33
RF10
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
81
60
52
46
41
37
89
69
59
53
46
41
92
78
69
60
53
47
91
84
75
67
62
56
90
81
75
67
62
58
91
80
72
57
53
51
82
61
54
47
47
45
78
56
50
45
41
38
67
45
40
35
32
29
–
–
–
–
–
–
64
46
41
36
32
31
67
51
45
40
35
32
RF11
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
84
63
53
46
41
36
89
72
61
54
46
41
91
74
67
59
52
47
91
80
73
66
61
56
89
81
74
67
62
58
91
79
73
57
52
51
84
63
56
48
48
45
82
60
54
48
45
41
76
54
48
43
39
36
62
42
36
31
27
24
–
–
–
–
–
–
63
43
37
35
32
29
RF12
10–100 MHz
100 MHz–1 GHz
1–2 GHz
2–4 GHz
4–6 GHz
6–8 GHz
88
70
56
47
40
35
93
77
62
54
45
40
93
71
65
57
50
46
90
79
71
64
59
55
90
78
73
65
61
58
92
78
72
56
52
50
86
64
58
49
49
45
84
63
57
50
46
42
82
59
53
47
43
39
67
50
44
38
33
29
63
43
38
34
31
28
–
–
–
–
–
–
Page 16
RF9 RF10 RF11 RF12
DOC-75868-3 – (03/2017)
www.psemi.com
PE42412
SP12T RF Switch
Typical Performance Data
Figure 3–Figure 20 show the typical performance data at +25 °C,VDD = 3.3V (ZS = ZL = 50Ω), unless otherwise
specified.
Figure 3 • Insertion Loss vs. Frequency (RFC–RFX)
Figure 5 • Insertion Loss vs. Frequency Over VDD
(RFC–RF1)
RFC-RF1
RFC-RF2
RFC-RF3
RFC-RF4
RFC-RF5
RFC-RF6
RFC-RF7
RFC-RF8
RFC-RF9
RFC-RF10
RFC-RF11
RFC-RF12
Insertion Loss (dB)
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
0
2
4
Frequency (GHz)
6
-40 °C
+25 °C
+85 °C
2
4
0
2
4
6
8
Frequency (GHz)
+105 °C
6
5.5V
Figure 6 • RFC Port Return Loss vs. Frequency
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
0
3.3V
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
8
Figure 4 • Insertion Loss vs. Frequency Over
Temperature (RFC–RF1)
Insertion Loss (dB)
2.3V
8
Return Loss (dB)
Insertion Loss (dB)
if
Frequency (GHz)
RF1 On
RF2 On
RF3 On
RF4 On
RF5 On
RF6 On
RF7 On
RF8 On
RF9 On
RF10 On
RF11 On
RF12 On
0
-10
-20
-30
-40
-50
0
2
4
6
8
Frequency (GHz)
DOC-75868-3 – (03/2017)
Page 17
www.psemi.com
PE42412
SP12T RF Switch
Figure 7 • RFC Port Return Loss vs. Frequency Over
Temperature (RF1 On)
-40 °C
+25 °C
+85 °C
Figure 10 • RF1 Active Port Return Loss vs. Frequency
Over Temperature
+105 °C
-40 °C
0
-10
-10
Return Loss (dB)
Return Loss (dB)
0
-20
-30
-40
-50
-60
2
4
Frequency (GHz)
6
+105 °C
-20
-30
-40
-50
-60
8
0
Figure 8 • RFC Port Return Loss vs. Frequency Over VDD
(RF1 On)
2.3V
3.3V
2
4
6
Frequency (GHz)
8
Figure 11 • RF1 Active Port Return Loss vs. Frequency
Over VDD
5.5V
2.3V
3.3V
5.5V
2
4
6
0
Return Loss (dB)
0
Return Loss (dB)
+85 °C
-70
0
-10
-20
-30
-40
-50
-10
-20
-30
-40
-50
-60
-70
-60
0
2
4
Frequency (GHz)
6
8
Frequency (GHz)
Figure 12 • Terminated Port Return Loss vs. Frequency
(RF1 On)
RF2
RF3
RF4
RF2
RF3
RF4
RF5
RF5
RF6
RF7
RF8
RF6
RF7
RF8
RF9
RF9
RF10
RF11
RF12
RF10
RF11
RF12
2
4
6
8
Return Loss (dB)
RF1
0
-10
-20
-30
-40
-50
-60
-70
0
0
8
Figure 9 • Active Port Return Loss vs. Frequency
Return Loss (dB)
+25 °C
0
-10
-20
-30
-40
-50
-60
-70
0
2
4
6
8
Frequency (GHz)
Frequency (GHz)
Page 18
DOC-75868-3 – (03/2017)
www.psemi.com
PE42412
SP12T RF Switch
Figure 13 • RF2 Terminated Port Return Loss vs.
Frequency Over Temperature (RF1 On)
-40 °C
+25 °C
+85 °C
Figure 16 • Isolation vs. Frequency Over VDD
(RF1–RF2, RF1 On)
+105 °C
3.3V
2
4
-20
-30
-40
-50
-60
-20
-30
-40
-50
-60
-70
-80
-70
-90
0
2
4
6
8
0
Frequency (GHz)
2.3V
3.3V
-40 °C
5.5V
Isolation (dB)
Return Loss (dB)
0
-20
-30
-40
-50
-60
-70
2
4
6
+25 °C
8
0
2
+85 °C
+105 °C
2.3V
Isolation (dB)
2
4
4
6
8
Figure 18 • Isolation vs. Frequency Over VDD
(RFC–RF2, RF1 On)
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
0
+105 °C
Frequency (GHz)
Figure 15 • Isolation vs. Frequency Over Temperature
(RF1–RF2, RF1 On)
+25 °C
+85 °C
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
Frequency (GHz)
-40 °C
8
Figure 17 • Isolation vs. Frequency Over Temperature
(RFC–RF2, RF1 On)
-10
0
6
Frequency (GHz)
Figure 14 • RF2 Terminated Port Return Loss vs.
Frequency Over VDD (RF1 On)
Isolation (dB)
5.5V
-10
-10
Isolation (dB)
Return Loss (dB)
2.3V
0
0
6
8
0
Frequency (GHz)
3.3V
5.5V
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
2
4
6
8
Frequency (GHz)
DOC-75868-3 – (03/2017)
Page 19
www.psemi.com
PE42412
SP12T RF Switch
Figure 19 • IIP2 vs. RF Port Measured
800 MHz IIP2
4 GHz IIP2
Figure 20 • IIP3 vs. RF Port Measured
2 GHz IIP2
8 GHz IIP2
140
130
IIP3 (dBm)
IIP2 (dBm)
120
110
100
90
80
70
60
800 MHz IIP3
2 GHz IIP3
4 GHz IIP3
8 GHz IIP3
80
75
70
65
60
55
50
45
40
RF Port Measured
RF Port Measured
Page 20
DOC-75868-3 – (03/2017)
www.psemi.com
PE42412
SP12T RF Switch
Evaluation Kit
The high-throw count RF switch evaluation kit (EVK) includes hardware required to control and evaluate the
functionality of the high-throw count switches. The high-throw count RF switch evaluation software can be
downloaded at www.psemi.com and requires a PC running Windows® operating system to control the USB
interface board. Refer to the Multi-throw Count RF Switch Evaluation Kit (EVK) User’s Manual for more information.
Figure 21 • Evaluation Board Layout for PE42412
DOC-75868-3 – (03/2017)
Page 21
www.psemi.com
PE42412
SP12T RF Switch
Pin Information
Table 8 • Pin Descriptions for PE42412 (Cont.)
Pin No.
Pin
Name
15
V4
16
RF7(1)
RF port 7
18
RF8(1)
RF port 8
GND
20
RF9(1)
RF port 9
25
This section provides pinout information for the
PE42412. Figure 22 shows the pin map of this device
for the available package. Table 8 provides a
description for each pin.
22
RF10(1)
RF port 10
GND
NC
RFC
RF12
26
27
28
29
GND
30
RF1
31
32
Pin 1 Dot
Marking
LS
Figure 22 • Pin Configuration (Top View)
Description
Digital control logic input 4
RF2
1
24
RF11
24
RF11(1)
RF port 11
GND
2
23
GND
26
RF12(1)
RF port 12
RF3
3
22
RF10
GND
4
21
GND
28
NC (2)
No connect
RF4
5
20
RF9
29
RFC(1)
RF common port
GND
6
19
GND
31
RF1(1)
RF port 1
RF5
7
18
RF8
GND
8
17
GND
32
LS
Pad
GND
10
11
12
13
14
15
16
GND
VDD
V1
V2
V3
V4
RF7
RF6
9
Exposed
Ground Pad
Table 8 • Pin Descriptions for PE42412
Logic Select—used to determine the
definition for V1, V2, V3 and V4 pins
Exposed pad: ground for proper operation
Notes:
1) RF pins 1, 3, 5, 7, 9, 16, 18, 20, 22, 24, 26, 29 and 31 must be at
0 VDC. The RF pins do not require DC blocking capacitors for
proper operation if the 0 VDC requirement is met.
2) Pin 28 (NC) can be connected to GND or left not connected externally.
Pin No.
Pin
Name
1
RF2(1)
2, 4, 6, 8,
10, 17, 19,
21, 23, 25,
27, 30
GND
3
RF3(1)
RF port 3
5
RF4(1)
RF port 4
7
RF5(1)
RF port 5
9
RF6(1)
RF port 6
11
VDD
Supply voltage (nominal 3.3V)
12
V1
Digital control logic input 1
13
V2
Digital control logic input 2
14
V3
Digital control logic input 3
Description
RF port 2
Ground
Page 22
DOC-75868-3 – (03/2017)
www.psemi.com
PE42412
SP12T RF Switch
Packaging Information
This section provides packaging data including the moisture sensitivity level, package drawing, package
marking and tape-and-reel information.
Moisture Sensitivity Level
The moisture sensitivity level rating for the PE42412 in the 32-lead 5 × 5 × 0.85 mm QFN package is MSL1.
Package Drawing
Figure 23 • Package Mechanical Drawing for 32-lead 5 × 5 × 0.85 mm QFN
0.10 C
A
5.00
(2X)
3.10±0.05
0.40±0.05
(x32)
B
17
0.60
(x32)
24
0.30
(x32)
0.50
(x28)
0.50
(x28)
16
25
5.00
3.10±0.05
0.25±0.05
(x32)
0.10 C
3.15
5.40
32
9
8
1
(2X)
3.50
REF
PIN #1 CORNER
TOP VIEW
CHAMFER
0.35 x 45°
3.15
5.40
BOTTOM VIEW
RECOMMENDED LAND PATTERN
0.10 C
0.10
0.05
0.85±0.05
0.05 C
SEATING PLANE
C A B
C
ALL FEATURES
0.203
REF
0.05
REF
C
SIDE VIEW
Top-Marking Specification
Figure 24 • Package Marking Specifications for PE42412
42412
YYWW
ZZZZZZZ
=
YY =
WW =
ZZZZZZZ =
Pin 1 indicator
Last two digits of assembly year
Assembly work week
Assembly lot code (Maximum seven characters)
DOC-75868-3 – (03/2017)
Page 23
www.psemi.com
PE42412
SP12T RF Switch
Tape and Reel Specification
Figure 25 • Tape and Reel Specifications for 32-lead 5 × 5 × 0.85 mm QFN
Direction of Feed
Section A-A
P1
P0
see
note 1
T
P2
see note 3
D1
D0
A
E
F
see note 3
B0
A0
K0
A0
B0
K0
D0
D1
E
F
P0
P1
P2
T
W0
5.25
5.25
1.10
1.50 + 0.1/ -0.0
1.5 min
1.75 ± 0.10
5.50 ± 0.05
4.00
8.00
2.00 ± 0.05
0.30 ± 0.05
12.00 ± 0.30
A
W0
Pin 1
Notes:
1. 10 Sprocket hole pitch cumulative tolerance ±0.2
2. Camber in compliance with EIA 481
3. Pocket position relative to sprocket hole measured
as true position of pocket, not pocket hole
Dimensions are in millimeters unless otherwise specified
Page 24
Device Orientation in Tape
DOC-75868-3 – (03/2017)
www.psemi.com
PE42412
SP12T RF Switch
Ordering Information
Table 9 lists the available ordering codes for the PE42412 as well as available shipping methods.
Table 9 • Order Codes for PE42412
Order Codes
Description
Packaging
Shipping Method
PE42412A-X
PE42412 SP12T RF switch
Green 32-lead 5 × 5 mm QFN
500 units/T&R
EK42412-02
PE42412 Evaluation kit
Evaluation kit
1/Box
Document Categories
Advance Information
The product is in a formative or design stage. The datasheet contains design target specifications for product development. Specifications and
features may change in any manner without notice.
Preliminary Specification
The datasheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any
time without notice in order to supply the best possible product.
Product Specification
The datasheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended
changes by issuing a CNF (Customer Notification Form).
Sales Contact
For additional information, contact Sales at [email protected].
Disclaimers
The information in this document is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be
entirely at the user’s own risk. No patent rights or licenses to any circuits described in this document are implied or granted to any third party.
Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to
support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death
might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in
such applications.
Patent Statement
Peregrine products are protected under one or more of the following U.S. patents: patents.psemi.com
Copyright and Trademark
©2017, Peregrine Semiconductor Corporation. All rights reserved. The Peregrine name, logo, UTSi and UltraCMOS are registered trademarks and
HaRP, MultiSwitch and DuNE are trademarks of Peregrine Semiconductor Corp.
Product Specification
www.psemi.com
DOC-75868-3 – (03/2017)