Cirrus CRD1615A-8W Reduced bom cost compared to cs1615 Datasheet

CRD1615A-8W
CRD1615A-8W
8 Watt Reference Design
Features
General Description
• Supports Cirrus Logic CS1615A
• <1% Minimum Dimming Across a Broad Range of
Dimmers
The CRD1615A-8W reference design demonstrates the
performance of the CS1615A single stage dimmable
AC/DC LED driver IC with a 250mA output driving
10  LEDs in series. The CS1615A is designed to support
a reduced off-chip BOM compared to the CS1615. It
offers best-in-class dimmer compatibility and minimum
dimming performance with leading-edge, trailing-edge, and
digital dimmers. The form factor is targeted to fit into many
LED bulb applications (GU10, A19-type, PAR, BR).
• Line Voltage 108VAC - 132VAC
DIMENSIONS (OVERALL)
• Reduced BOM Cost Compared to CS1615
• Isolated Flyback Topology with Constant-current
Output
• Flicker-free Dimming
Length
• Rated Output Power: 7.5W
• Efficiency: ~82% at 250mA for 10  LEDs in Series
• Power Factor >0.99
Width
Height
2.028  51.5mm   1.004  25.5mm   0.65  16.5mm 
For more information, see Figure 3 on page 6.
ORDERING INFORMATION
CRD1615A-8W-Z
8 Watt Reference Design
Supports CS1615A
Top
Bottom
Cirrus Logic, Inc.
http://www.cirrus.com
Copyright  Cirrus Logic, Inc. 2013
(All Rights Reserved)
AUG‘13
DS1043RD2
CRD1615A-8W
IMPORTANT SAFETY INSTRUCTIONS
Read and follow all safety instructions prior to using this demonstration board.
This Engineering Evaluation Unit or Demonstration Board must only be used for assessing IC performance in a
laboratory setting. This product is not intended for any other use or incorporation into products for sale.
This product must only be used by qualified technicians or professionals who are trained in the safety procedures
associated with the use of demonstration boards.
Risk of Electric Shock
•
The direct connection to the AC power line and the open and unprotected boards present a serious risk of electric
shock and can cause serious injury or death. Extreme caution needs to be exercised while handling this board.
•
Avoid contact with the exposed conductor or terminals of components on the board. High voltage is present on
exposed conductor and it may be present on terminals of any components directly or indirectly connected to the AC
line.
•
Dangerous voltages and/or currents may be internally generated and accessible at various points across the board.
•
Charged capacitors store high voltage, even after the circuit has been disconnected from the AC line.
•
Make sure that the power source is off before wiring any connection. Make sure that all connectors are well
connected before the power source is on.
•
Follow all laboratory safety procedures established by your employer and relevant safety regulations and guidelines,
such as the ones listed under, OSHA General Industry Regulations - Subpart S and NFPA 70E.
Suitable eye protection must be worn when working with or around demonstration boards. Always
comply with your employer’s policies regarding the use of personal protective equipment.
All components and metallic parts may be extremely hot to touch when electrically active.
Contacting Cirrus Logic Support
For all product questions and inquiries contact a Cirrus Logic Sales Representative. To find the one nearest to you
go to www.cirrus.com
IMPORTANT NOTICE
Cirrus Logic, Inc. and its subsidiaries ("Cirrus") believe that the information contained in this document is accurate and reliable. However, the information is subject
to change without notice and is provided "AS IS" without warranty of any kind (express or implied). Customers are advised to obtain the latest version of relevant
information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale
supplied at the time of order acknowledgment, including those pertaining to warranty, indemnification, and limitation of liability. No responsibility is assumed by Cirrus
for the use of this information, including use of this information as the basis for manufacture or sale of any items, or for infringement of patents or other rights of third
parties. This document is the property of Cirrus and by furnishing this information, Cirrus grants no license, express or implied under any patents, mask work rights,
copyrights, trademarks, trade secrets or other intellectual property rights. Cirrus owns the copyrights associated with the information contained herein and gives
consent for copies to be made of the information only for use within your organization with respect to Cirrus integrated circuits or other products of Cirrus. This consent does not extend to other copying such as copying for general distribution, advertising or promotional purposes, or for creating any work for resale.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE ("CRITICAL APPLICATIONS"). CIRRUS PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR
USE IN PRODUCTS SURGICALLY IMPLANTED INTO THE BODY, AUTOMOTIVE SAFETY OR SECURITY DEVICES, LIFE SUPPORT PRODUCTS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF CIRRUS PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S RISK
AND CIRRUS DISCLAIMS AND MAKES NO WARRANTY, EXPRESS, STATUTORY OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, WITH REGARD TO ANY CIRRUS PRODUCT THAT IS USED IN SUCH A MANNER. IF THE CUSTOMER
OR CUSTOMER'S CUSTOMER USES OR PERMITS THE USE OF CIRRUS PRODUCTS IN CRITICAL APPLICATIONS, CUSTOMER AGREES, BY SUCH USE,
TO FULLY INDEMNIFY CIRRUS, ITS OFFICERS, DIRECTORS, EMPLOYEES, DISTRIBUTORS AND OTHER AGENTS FROM ANY AND ALL LIABILITY, INCLUDING ATTORNEYS' FEES AND COSTS, THAT MAY RESULT FROM OR ARISE IN CONNECTION WITH THESE USES.
Cirrus Logic, Cirrus, the Cirrus Logic logo designs, EXL Core, and the EXL Core logo design are trademarks of Cirrus Logic, Inc. All other brand and product names
in this document may be trademarks or service marks of their respective owners.
2
DS1043RD2
CRD1615A-8W
1. INTRODUCTION
The CS1615A is a 120VAC quasi-resonant flyback mode dimmable LED controller IC. The CS1615A uses a digital
control algorithm that is optimized for high efficiency and > 0.99 power factor over an input voltage range (108VAC
to 132VAC). The CS1615A integrates a dimmer compatibility circuit with a constant output current, quasi-resonant
flyback stage. An adaptive dimmer compatibility algorithm controls the dimmer compatibility operation mode to enable flicker-free operation from 0% to 100% output current with leading-edge, trailing-edge, and digital dimmers.
The CRD1615A-8W board is optimized to deliver low system cost in a high-efficiency, flicker-free, phase-dimmable,
solid-state lighting (SSL) solution for incandescent lamp replacement applications. The feedback loop is closed
through an integrated digital control system within the IC. Protection algorithms such as output open/short,
current-sense resistor open/short, and overtemperature thermistors protect the system during abnormal conditions.
When using the CS1615A for a design that does not require active clamp circuitry, the CLAMP pin should be left
floating. Details of these features are provided in the CS1615A/16A data sheet DS1033 Single Stage Dimmable
Controller for LED Lamps.
The CRD1615A-8W board demonstrates the performance of the CS1615A. This reference board has been designed for an output load of 10  LEDs in series at 250mA (  30.0V typical).
This data sheet provides the schematic and PCB layout for the reference design board. The performance graphs
demonstrate the performance of the CS1615A dimmable-controller reference design in terms of Efficiency vs. Line
Voltage, Power Factor vs. Line Voltage, THD vs. Line Voltage, Output Current vs. Line Voltage, and Output Current
vs. Dim Angle.
Extreme caution needs to be exercised while handling this board. This board is to be used by trained professionals
only.
DS1043RD2
3
4
2. SCHEMATIC
( )
2+0
6
*6-/73
9
5
%5
9
)
&
.
&
3/<)/0
X)
X)
9
&
07/32/<
8)
&
12323
5
5
12323
12323
3UL
'
12323
5
/,1(
'(6&5,37,21
$
,1,7,$/5(/($6(
$X[ '
'21273238/$7(
5
N
75
((
$
'
'$7(
(
/('9(
66/73
9
5(9
/
X+
'
6HF
&
$/(/(&
X)
%
5
.
(
95
029'.
9
9B&175/
/('9(
5
2+0
(
&
;5
8)
1(875$/
5
N
'
1:;73
9
=
1=+&
9
&<
;5
S)
4
$2'1
'
&
'
;5
1:;73 S)
9
1:;73
9
&
(/(&
X)
4
13
'
6
*
)%6(16(
8
9''
)%$8;
2+0
6
*
9''
4
'01/
5
.
&75/
6*1'
1&
5
5
.
&
6&/
&75/
6'$
&
;5
8)
5
.
5
.
12323
127(681/(6627+(5:,6(63(&,),('
$//5(6,67259$/8(6$5(,12+06
9''+
(273
5
6285&(
&6$)6=
&
;5
S)
*'
&
5
.
17&
.
W
'
$8;&175/
,$&
5
&/$03
*1'
'
1:;73
9
9B&175/
5
.
12323
$8;,/,$5<+$5':$5($1'5(/$7(''2&80(176
6&+(0$7,&':*
=
$66<':*
=
6+((7
7,7/(
3$57
/%/68%$66<352','$1'5(9
DS1043RD2
Figure 1. Schematic
6&+&5'$:
=B5(9B$
'5$:1%<
&/$0%(57
'$7(
(1*,1((5&/$0%(57
6+((7
2) 6+((7
6,=(
%
CRD1615A-8W
3&%':*
=
CRD1615A-8W
3. BILL OF MATERIALS
Item Rev DescripƟon
1
DIODE RECT 200V 0.8A NPB MINIDIP
2
CAP 0.047uF ±5% 250V POLY NPb RAD
3
CAP 0.068uF ±10% 250V MPOLY NPb RAD
4
CAP 0.15uF ±10% 250V POLY NPb RAD
5
CAP 1uF ±10% 25V X7R NPb 0805
6
A CAP 0.047uF ±10% 25V X7R NPb 0603
7
A CAP 1000pF ±10% 50V X7R 0603
8
CAP 33uF ±20% 35V ALUM ELEC NPb RAD
9
CAP 680uF ±20% 35V AL ELEC NPb RAD
10
CAP 220pF ±10% 600V X7R NPb1206
11
CAP 56pF ±5% 50V C0G NPb 0603
12
CAP 100pF ±10% 50V X7R CER NPb 0603
13
CAP 2200pf ±10% 2KV X7R NPb 1210
14
DIODE HS SWT 100V 150mA NPb SOD323
15
DIODE 600V 1A NPb SMA DO-214AC
16
DIODE SKY RECT 150V 2A NPb DO-214AC
17
DIODE ULT FAST 600V 1A NPb SMA
18
RES 22 OHM 2W ±10% MTLFLM NPb AXIAL
19
IND 10000uH 0.053A MINI-DRUM NPb TH
20
THERM 100K OHM ±5% 0.10mA NPb 0603
21
TRAN MOSFET nCH 2.5A 600V NPb DPAK
22
TRAN MOSFET nCH 30V 5.8A NPb SOT23
23
TRAN MSFET nCH 60V 360mA NPb SOT-23
24
RES 22 OHM 1/8W ±5% NPb 0805 FILM
25
RES 750k OHM 1/8W ±1% NPb 0805 FILM
26
RES 4.7k OHM 1/8W ±5% NPb 0805 FILM
27
RES 470 OHM 2W ±5% MTL FLM NPb AXL
28
RES 47 OHM 1/10W ±1% NPb 0603
29
RES 10k OHM 1/4W ±1% NPb 1206 FILM
30
RES 80.6k OHM 1/10W ±1% 0603 FILM
31
RES 39.2k OHM 1/10W ±1% NPb 0603
32
RES 14k OHM 1/10W ±1% NPB 0603 FILM
33
RES 1.8 OHM 1/4W ±1% NPb 1206 FILM
34
RES 75k OHM 1/10W ±1% NPb 0603 FILM
35
RES 2.61k OHM 1/10W ±1% NPb 0603
36
RES 27K OHM 1/8W ±0.1% NPb 0805
37
RES 1k OHM 1/10W ±5% NPb 0603 FILM
38
XFMR 0.9mH ±10% 10KHz NPb TH
39 B1 IC CRUS TRIAC DIM PFC 120V NPb SO16
40
VARISTOR 240V 210pF 15J 7mm NPb RAD
41
DIODE ZENER 500mW 16V NPb SOD123F
Qty
1
1
1
1
1
1
1
1
1
0
0
1
1
4
1
1
0
1
1
1
1
1
1
1
2
0
1
2
0
1
1
1
1
1
1
1
1
1
1
1
1
Reference Designator
BR1
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10 C11
C12
CY
D1 D2 D4 D8
D3 D7
D6
D9
F1
L1
NTC
Q1
Q2
Q3
R1
R2 R3
R4
R5
R6 R13
R7 R11
R8
R9
R10
R12
R14
R15
R16
R17
TR1
U1
VR1
Z1
MFG
DIODES INC
EPCOS
PANASONIC
EPCOS
TDK
KEMET
KEMET
PANASONIC
PANASONIC
AVX
KEMET
TDK
JOHANSON DIELECTRICS
MICRO COMMERCIAL
MCC
MCC
ST MICROELECTRONICS
TT ELECTRONICS
RENCO
MURATA
ALPHA & OMEGA
DIODES INC
NXP
DALE
PANASONIC
DALE
VISHAY
PANASONIC
DALE
DALE
DALE
DALE
DALE
DALE
DALE
PANASONIC
DALE
KUNSHAN EAGERNESS
CIRRUS LOGIC
BOURNS
NXP
MFG P/N
HD02-T
B32529C3473J
ECQE2683KB
B32529C3154K
C2012X7R1E105K125AB
C0603C473K3RAC
C0603C102K5RAC
ECA1VHG330
EEUFR1V681
1206CC221KAT1A
C0603C560J5GAC
C1608X7R1H101K
202S41W222KV4E
1N4148WX-TP
GS1J-LTP
SS2150-LTP
STTH1L06A
EMC2-22RKI
RL-5480-3-10000
NCP18WF104J03RB
AOD3N60
DMN3404L-7
2N7002P,215
CRCW080522R0JNEA
ERJ6ENF7503V
CRCW08054K70JNEA
PR02000204700JR500
ERJ3EKF47R0V
CRCW120610K0FKEA
CRCW060380K6FKEA
CRCW060339K2FKEA
CRCW060314K0FKEA
CRCW12061R80FKEA
CRCW060375K0FKEA
CRCW06032K61FKEA
ERA-6YEB273V
CRCW06031K00JNEA
EF16-CL011M
CS1615A-FSZ/B1
MOV-07D241K
NZH16C,115
Figure 2. Bill of Materials
DS1043RD2
5
6
4. BOARD LAYOUT
CRD1615A-8W
DS1043RD2
Figure 3. PCB Dimensions
DS1043RD2
7
CRD1615A-8W
Figure 4. Top Silkscreen
8
CRD1615A-8W
DS1043RD2
Figure 5. Bottom Silkscreen
DS1043RD2
9
CRD1615A-8W
Figure 6. Top Routing
10
CRD1615A-8W
DS1043RD2
Figure 7. Bottom Routing
CRD1615A-8W
5. THERMAL IMAGING
Figure 8. Top Thermal
Figure 9. Bottom Thermal
DS1043RD2
11
CRD1615A-8W
6. DIMMER COMPATIBILITY
A19 Lamp with a CS1615A (120V/60Hz)
Date
8/12/2013
Power Factor1,4
Vendor
Cirrus Logic
EN55015 Compliant (Y/N)
Input Voltage
Form Factor
120V/60Hz
1,4
Maximum Input Power (W)
Output Voltage (V)
CS1615A
Topology
Y
Efficiency (%)
81.7
Dimmer 5
Manufacture
Type
9.0
1,2
Output Current (mA)
29.9
1,2
247
Output Current Ripple  120Hz
Flyback
Isolation (Y/N)
9.0
Nominal Input Power (W)
CRD1615A-8W
IC
Y
1,4
A19
Model #
0.994
(mA)1,3
200
1,4
Output Power (W)
7.385
Flicker Free
Steady-State
Monotonic
Dimming
Max Iout (%)
Min Iout (%)
# of lamps
# of lamps
# of lamps
# of lamps
1
5
10
1
5
10
1
5
10
1
5
10
Cooper 6001
Leading Edge
Y
Y
Y
Y
Y
Y
100.0
100.0
98.8
0.4
0.4
0.4
Cooper 9530
Leading Edge
Y
Y
Y
Y
Y
Y
100.4
100.4
99.6
0.4
0.4
0.4
Cooper DI06P
Leading Edge
Y
Y
Y
Y
Y
Y
100.0
100.0
98.8
0.4
0.4
0.4
GE 52136
Leading Edge
N
Y
Y
Y
Y
Y
100.0
100.0
98.8
0.4
0.4
0.4
GE IRIS 45639
Leading Edge
Y
Y
Y
Y
Y
Y
100.0
99.6
98.8
0.4
0.4
0.4
Legrand ADPD703HW4 Leading Edge
Y
Y
Y
Y
Y
Y
100.0
100.0
98.8
0.4
0.4
0.4
Legrand ADTP703UM4
Leading Edge
Y
Y
Y
Y
Y
Y
100.4
100.4
99.2
0.4
0.4
0.4
Leviton 6161
Leading Edge
N
Y
N
Y
Y
Y
99.2
98.8
98.8
0.4
0.8
0.4
Leviton 6613
Leading Edge
Y
Y
Y
Y
Y
Y
100.0
100.0
98.8
0.4
0.4
0.4
Leviton 6615
Trailing Edge
Y
Y
Y
Y
Y
Y
99.6
99.2
98.0
0.4
0.4
0.4
Leviton 6627
Leading Edge
Y
Y
Y
Y
Y
Y
89.9
89.9
91.5
3.2
2.4
2.4
Leviton 6631
Leading Edge
Y
Y
Y
Y
Y
Y
100.0
100.0
98.8
0.4
0.4
0.4
Leviton 6641
Leading Edge
Y
Y
Y
Y
Y
Y
99.6
98.0
98.4
0.4
0.4
0.4
Leviton 6683
Leading Edge
Y
Y
Y
Y
Y
Y
100.0
100.0
98.8
0.4
0.4
0.4
Leviton 6684
Leading Edge
Y
Y
Y
Y
Y
Y
100.0
100.0
98.8
0.4
0.4
0.4
Leviton 700
Leading Edge
Y
Y
Y
Y
Y
Y
100.0
100.0
98.8
0.4
0.4
0.4
Leviton ACE04
Trailing Edge
Y
Y
Y
Y
Y
N
99.6
99.6
98.4
0.4
0.4
0.4
Leviton ACM06
Leading Edge
Y
Y
Y
Y
Y
Y
99.6
99.6
98.8
0.4
0.4
0.4
Leviton ACX10
Leading Edge
Y
N
Y
Y
Y
N
99.6
14.6
10.1
4.5
0.8
0.4
Leviton HCM06
Leading Edge
Y
Y
Y
Y
Y
Y
100.0
100.0
99.2
0.4
0.4
0.4
Leviton IPI06-1L
Leading Edge
Y
Y
Y
Y
Y
Y
100.0
100.0
98.8
0.4
0.4
0.4
Leviton VZM06
Leading Edge
Y
Y
Y
Y
Y
Y
99.6
99.6
98.8
0.8
0.4
0.4
Lutron AB-600M
Leading Edge
Y
Y
Y
Y
Y
Y
93.9
94.3
95.1
0.4
0.4
0.4
12
DS1043RD2
CRD1615A-8W
Dimmer 5
Manufacture
Type
Flicker Free
Steady-State
Monotonic
Dimming
Max Iout (%)
Min Iout (%)
# of lamps
# of lamps
# of lamps
# of lamps
1
5
10
1
5
10
1
5
10
1
5
10
Lutron AY-600P
Leading Edge
Y
Y
Y
Y
Y
Y
98.8
97.2
98.8
0.4
0.4
0.4
Lutron CT-600P
Leading Edge
Y
N
Y
Y
Y
Y
97.6
97.2
98.4
0.4
0.4
0.4
Lutron CT-603PG
Leading Edge
N
Y
Y
Y
Y
Y
81.0
83.0
79.8
0.4
0.4
0.4
Lutron CTCL-153P
Leading Edge
Y
Y
Y
Y
Y
Y
95.5
94.7
95.5
0.4
0.4
0.4
Lutron DV-600P
Leading Edge
Y
Y
Y
Y
Y
Y
98.4
98.4
98.4
0.4
0.4
0.4
Lutron DVCL-153P
Leading Edge
Y
Y
Y
Y
Y
Y
95.5
96.0
96.8
0.4
0.4
0.4
Lutron DVELV-300P
Trailing Edge
Y
Y
Y
N
N
N
88.3
85.8
86.6
0.4
0.4
0.4
Lutron DVW-603PG
Leading Edge
Y
Y
Y
Y
Y
Y
80.6
82.6
79.8
0.4
0.4
0.4
Lutron GL-600P
Leading Edge
Y
Y
Y
Y
Y
Y
96.8
96.8
97.6
0.4
0.4
0.4
Lutron LG-103P
Leading Edge
Y
Y
Y
Y
Y
Y
98.0
97.6
98.4
0.4
0.4
0.4
Lutron MACL-153M
Leading Edge
Y
Y
Y
Y
Y
Y
91.1
90.7
91.1
0.4
0.4
0.4
Lutron MAW-600
Leading Edge
Y
Y
Y
Y
Y
Y
97.2
97.2
98.4
0.4
0.4
0.4
Lutron MIR-600
Leading Edge
Y
Y
Y
Y
Y
Y
96.8
97.2
98.0
0.4
0.4
0.4
Lutron NT2000
Leading Edge
Y
Y
Y
Y
Y
Y
94.7
94.3
96.0
0.4
0.4
0.4
Lutron NTELV-600
Trailing Edge
Y
Y
Y
N
N
N
92.7
92.3
92.7
0.4
0.4
0.4
Lutron NTLV-600
Leading Edge
Y
Y
Y
Y
Y
Y
100.0
100.0
98.8
0.4
0.4
0.4
Lutron Q-603P
Leading Edge
Y
Y
Y
Y
Y
Y
98.4
98.4
98.4
0.4
0.4
0.4
Lutron S-103P
Leading Edge
Y
Y
Y
Y
Y
Y
98.4
97.6
98.4
0.4
0.4
0.4
Lutron S-600P
Leading Edge
Y
N
Y
Y
Y
Y
98.0
97.6
98.4
0.4
0.4
0.4
Lutron SELV-303P
Trailing Edge
Y
Y
Y
N
N
N
89.5
86.6
87.9
0.4
0.4
0.4
Lutron SLV-600P
Leading Edge
N
N
Y
Y
Y
Y
98.8
98.8
98.8
0.4
0.4
0.4
Lutron SLV-603P
Leading Edge
Y
Y
Y
Y
Y
Y
99.2
98.8
98.8
0.4
0.4
0.4
Lutron SPS-600
Leading Edge
Y
Y
Y
Y
Y
Y
98.8
98.8
98.8
0.4
0.4
0.4
Lutron SPSLV-1000
Leading Edge
Y
Y
Y
Y
Y
Y
99.6
99.2
98.8
0.4
0.4
0.4
Lutron TG-600P
Leading Edge
Y
Y
Y
Y
Y
Y
99.6
100.0
98.8
0.4
0.4
0.4
Lutron TG-603PG
Leading Edge
Y
N
Y
Y
Y
Y
83.8
83.8
85.4
0.4
0.4
0.4
Lutron TGCL-153P
Leading Edge
Y
Y
Y
Y
Y
Y
98.0
97.2
98.0
0.4
0.4
0.4
Smarthome 2486D
Leading Edge
Y
Y
Y
Y
Y
Y
100.0
99.6
98.8
0.4
0.4
0.4
1.
2.
3.
4.
5.
Tested at nominal input voltage, nominal input frequency and without a dimmer after soaking for 15 minutes
Average
Peak-to-peak
Measured with Chroma 66202 Power Analyze
This document includes trademarks, trade names, brands, logos, product names and/or product identifiers of companies other
than Cirrus Logic, Inc. All such trademarks, trade names, brands, logos, product names, and product identifiers are for
identification purposes only and are the property of their respective owners, who are not affiliated with Cirrus Logic. Please visit
the respective sites of those owners to obtain a listing or understanding of their trademark rights. This document also includes
results from testing performed by Cirrus Logic for its own purposes and for which there are currently no industry standards. While
this testing was applied objectively, its results may include at least some degree of subjectivity. The testing or test results should
not be interpreted as any comment on the overall quality or suitability of any tested products
DS1043RD2
13
CRD1615A-8W
7. TRANSFORMER CONSTRUCTION
The CRD1615A-8W provides power factor correction and dimmer compatibility with a constant output current, quasiresonant flyback stage. The following sections describe the flyback transformer installed on the CRD1615A-8W.
7.1
Flyback Transformer
The flyback transformer stage is a quasi-resonant peak current-regulated DC-DC converter capable of delivering
the highest possible efficiency with constant current output while minimizing line frequency ripple. The auxiliary winding is used for zero-current detection and overvoltage protection.
4
48T
#27 AWG
( 0.36 mm)
Primary 6
48 T
# 27AWG
( 0.36mm)
A
48T
#30AWG
( 0.255mm)
Secondary
(Triple Ins ulated )
B
5
7
48T
# 33AWG
(0.18mm)
Auxiliary
12
Figure 10. Flyback Transformer Schematic
7.1.1
Electrical Specifications
Characteristics conditions:
• Operating temperature range: -25 °C to +120 °C (including coil heat)
Parameter
Condition
Symbol
Min
Typ
Max
Unit
-
3.75
-
kVRMS
Flyback Transformer
Electrical Strength
Primary Inductance
(Note 1)
(Note 2)
foperate=50/60Hz
fresonant=10kHz, 0.3V at 20°C
LP
0.8
0.9
1.0
mH
fresonant=10kHz, 0.3V at 20°C
LK
H
-
-
20
(Note 2)
tDCR =20°C
1.9
2.2
2.5

Secondary DC Resistance (Note 3)
tDCR =20°C
0.8
1.0
1.2
m
Auxiliary DC Resistance
tDCR =20°C
3.0
3.5
4.0
m
Primary Leakage Inductance(Note 2)
Primary DC Resistance
Notes:
14
1.
2.
3.
4.
(Note 4)
Time = 2sec.
Measured across pins 4 and 5
Measured across pins B and A
Measured across pins 12 and 7
DS1043RD2
CRD1615A-8W
8. PERFORMANCE PLOTS
0.30
Output Current (A)
0.28
0.26
0.24
0.22
0.20
108
110
112
114
116
118
120
122
124
126
128
130
132
128
130
132
Line Voltage (V)
Figure 11. Output Current vs. Line Voltage
85
84
83
Efficiency(%)
82
81
80
79
78
77
76
75
108
110
112
114
116
118
120
122
124
126
Line Voltage (V)
Figure 12. Typical Efficiency vs. Line Voltage
DS1043RD2
15
CRD1615A-8W
1.00
0.99
0.98
Power Factor
0.97
0.96
0.95
0.94
0.93
0.92
0.91
0.90
108
110
112
114
116
118 120 122
Line Voltage (V)
124
126
128
130
132
128
130
132
Figure 13. Power Factor vs. Line Voltage
10
THD (%)
9
8
7
6
5
108
110
112
114
116
118
120
122
124
126
Line Voltage (V)
Figure 14. THD vs Line Voltage
16
DS1043RD2
CRD1615A-8W
300
Output Current (mA)
250
200
Leading Edge
150
Trailing Edge
100
50
0
35
50
65
80
95
110
125
Dim Angle (o)
140
155
170
180
Figure 15. Typical Output Current vs Dim Angle
DS1043RD2
17
CRD1615A-8W
Figure 16. No-dimmer Mode, Startup, 120 VAC
Figure 17. No-dimmer Mode, Steady-state, 120VAC
18
DS1043RD2
CRD1615A-8W
Figure 18. Leading-edge Dimmer Mode, Steady-state, 120VAC
Figure 19. Trailing-edge Dimmer Mode, Steady-state, 120VAC
DS1043RD2
19
CRD1615A-8W
9. CONDUCTED EMI
Device Under Test: CRD1615A-8W-Z
Operating Conditions: NOMINAL
Test Specification: EN55022:2010
Operator Name: CAL
Scan Settings (1 Range)
Frequencies
Receiver Settings
Start
Stop
Step
Res BW
M-Time
Atten
Preamp
150kHz
30MHz
4.5kHz
9kHz (6dB)
50ms
Auto
Off
Final Measurement
Detectors: QP, AV
Peaks: 10
Meas Time: See scan settings
Acc. Margin: 12dB
Figure 20. Conducted EMI
Final Measurement Results
Trace
Frequency
(MHz)
Level
(dBV)
Limit
(dBV)
Delta Limit
(dB)
Delta Ref
(dB)
Comment
1QP
0.19
53.18
64.01
-10.83
N/on
2AV
10.0005
41.29
50.00
-8.71
N/on
* = Limit Exceeded
20
DS1043RD2
CRD1615A-8W
10. REVISION HISTORY
Revision
Date
Changes
RD1
JUL 2013
Preliminary release
RD2
AUG 2013
Content clarification
DS1043RD2
21
Similar pages