Components MMGGD0L Subminiature precision snap-acting switch Datasheet

MM Series
Subminiature Precision Snap-acting Switches
Features/Benefits
• Low level and power switching
• Long electrical and mechanical life
• Increased overtravel
• Reliable snap-acting mechanism
Specifications
Materials
CONTACT RATING: From low level* to 7 AMPS @ 250 V AC.
ELECTRICAL LIFE: 100,000 cycles at full rated load.
INSULATION RESISTANCE: 1,000 ohm min.
DIELECTRIC STRENGTH: 1,000 V RMS min. @ sea level.
OPERATING TEMPERATURE: –67 F to 275 F (–55 C to 135 C).
OPERATING FORCE: 5 oz. (142 grams) max. at actuator button.
MOUNTING: 2-56 screws, torque 2 in/lbs max.
SWITCH HOUSING: Heat resistant phenolic (UL 94V-0).
ACTUATOR BUTTON: Heat resistant phenolic (UL 94V-0).
SPRING: Beryllium copper CDA alloy C17200.
PIVOT: Brass CDA alloy 260.
MOVABLE CONTACTS: Fine silver for ratings greater than 1 AMP @
125 V AC. 24K gold for 1 AMP @ 125 V AC or less.
STATIONARY CONTACTS: Fine silver inlay on copper CDA alloy
C10200 for ratings greater than 1 AMP @ 125 V AC. 24K gold on
copper CDA alloy C10200 for 1 AMP @ 125 V AC or less.
TERMINALS: Copper CDA alloy C18700.
*Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @
20 V AC or DC max.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service center.
Snap-acting
J
Typical Applications
• Limited space constraints
• Miniaturized military devices
• Communication devices
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages J-31 through J-32. For additional options not shown in catalog, consult Customer Service Center.
M M
G G
Series
MM SP, Mom.
Operating Force
GG 5 oz./142 grams
Electrical Rating
D1 7 A, 250 V AC
F5 1 A, 125 V AC, 30 V DC
Actuator
P0 Pin plunger
D0 Plunger, high overtravel
L0 Leaf
L2 Leaf, high force, low motion
W0 Leaf roller
W2 Leaf roller, high force, low motion
Terminations
C Single turret solder
L Left formed PC thru-hole
R Right formed PC thru-hole
T PC thru-hole, .035”
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
J–30
www.ck-components.com
MM Series
Subminiature Precision Snap-acting Switches
SWITCH WITH STANDARD OPTIONS
MMGGD1P0C
MMGGD1P0C
BASIC
OPERATING
FORCE
(OZ./GRAMS)
PART NUMBER
5
142
MMGGD1P0C
SERIES
MM
ELECTRICAL
RATING
7 AMPS @ 250 V AC.
OPERATING FORCE
SPDT MOMENTARY
OPTION
CODE
BASIC SWITCH
OPERATING FORCE
5 oz. (142 grams) maximum for basic switch
with pin plunger actuator (‘P0’ actuator option).
GG
ELECTRICAL RATING
CONTACT MATERIAL
OPTION
CODE
RoHS
COMPLIANT*
RoHS
COMPATIBLE*
D1
Yes
Yes
Fine silver.
Fine silver inlay on copper alloy.
7 AMPS @ 250 V AC.
F5
Yes
Yes
24K Gold.
24K Gold on copper alloy.
From low level* to 1 AMP
@ 125 V AC, 30 V DC.
MOVABLE CONTACT
STATIONARY CONTACT
ELECTRICAL RATING
Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications.
All models
with all options.
Consult Customer Service Center for availability and delivery of nonstandard ratings.
* Low Level=conditions where no arcing occurs during switching,
i.e., 0.4 VA max. @ 20 V AC or DC max.
ACTUATOR
OPTION CODE
FIG.
DIM. A
DIM. B
DIM. C
P0
D0
FIG. 1
Pin Plunger
FIG. 2
Leaf
FIG. 3
Plunger
L0
L2
W0
W2
FIG. 4
Leaf Roller
FIG. 5
Leaf
FIG. 6
Leaf Roller
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
J–31
www.ck-components.com
Snap-acting
NOTE: Operating force varies with actuator option, see ACTUATOR option section.
J
MM Series
Subminiature Precision Snap-acting Switches
ACTUATOR
SWITCH CHARACTERISTICS
OPTION
CODE
MAXIMUM OPERATING
FORCE (OZ./GRAMS)
MINIMUM RELEASE
FORCE (OZ./GRAMS)
MAXIMUM
DIFFERENTIAL
TRAVEL
MAXIMUM
PRETRAVEL
MINIMUM
OVERTRAVEL
NOTE: For basic switch operating forces, see page J-31
.
TERMINATIONS
C
L
SINGLE TURRET SOLDER
LEFT FORMED PC THRU-HOLE
Snap-acting
J
PC MOUNTING
T
R
PC THRU-HOLE, .035
RIGHT FORMED PC THRU-HOLE
PC MOUNTING
PC MOUNTING
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
J–32
www.ck-components.com
Similar pages