Advantech MIC-6311-B1I8E Openvpx cpu blade with intelâ® 4th generation coreâ® processor Datasheet

MIC-6311
OpenVPX CPU Blade with
Intel® 4th Generation Core® Processor
Features
ƒƒ 4th Generation Intel® Core® processor up to 4 cores / 8 threads
ƒƒ Intel® QM87 PCH
ƒƒ Triple independent display support
ƒƒ OpenVPX MOD6-PAY-4F1Q2U2T-12.2.1-2 profile compliant
ƒƒ Onboard and SO-DIMM DDR3-1600 up to 16 GB with ECC support
ƒƒ Two SRIOx4 ports and two PCIex8 ports on Fabric interface
ƒƒ Two 1000BASE-T ports on Base interface
ƒƒ Two 1000BASE-T front panel ports
ƒƒ One CFast / one 2.5" SSD storage Device
RoHS
COMPLIANT
2002/95/EC
Introduction
Advantech’s MIC-6311 is a single processor VPX blade based on the Intel® 4th generation Core® i3/i5/i7 platform. It enables the highest performance available in 6U VPX form
factor with two SRIOx4 ports in the VPX data plane and two PCI Express x8 gen. 3 lanes in the VPX expansion plane for workstation and compute intense applications. The two Serial
RapidIO ports offer the possibility to interface the MIC-6311 to digital front ends such as DSP and FPGA cards via a high speed, low latency deterministic interconnect. In addition,
PCI Express ports with up to 8GB/s throughput offer a high performance interface to mainstream peripherals and IO cards. With a SO-DIMM socket and additional soldered, onboard
DRAM with ECC in a dual channel design running up to 1600MT/s, the MIC-6311 offers the ability to fit harsh environments while maintaining maximum memory throughput and
supporting memory expansion using the latest SO DIMM technology. Moreover, the 4th generation Core® processors offer increased cache size and efficiency as well as instruction
set improvements which make the MIC-6311 a high performance compute engine with outstanding floating point and vector processing performance.
Tailored for rugged environments, MIC-6311 has been designed to support conduction-cooling heat sinks. Additionally, it implements an onboard soldered, industrial SSD for maximum
reliability. By using Intel’s latest powerful PCH (Lynx Point) with its advanced SATA controller advanced storage options are supported such as a 2.5" SATA III HDD/SSD socket offering
high storage capacity with up to 6Gbps transfer speed. A CFast socket provides an alternative for implementing a cost efficient, pluggable SSD. An onboard XMC/PMC site with PCIe
x8 gen.3 connectivity can host high speed offload or I/O mezzanines. Two USB 3.0 ports in front panel can connect to the external devices with up to 5Gbps data rate. Network and
remote connectivity can be achieved via a RS232 console (RJ45) and two GbE RJ45 ports, powered by intel’s latest Gigabit Ethernet Controiller, the i350.
The processor’s integrated enhanced graphics engine Iris offers the up to 2x the graphic performance compared to previous generation solutions. Triple independent display support
can be implemented by using the MIC-6311’s VGA front panel port and two Display port / HDMI interfaces on rear transition modules. Audio port support via the backplane interface
enhances media support. Three SATA ports (SATAIII) and four USB ports (2x USB 3.0, 2x USB 3.0) are also connected to backplane to fulfill the demand for extra IO ports or storage.
Two GbE/ SERDES ports support system level IP connectivity and two UART interfaces can be leveraged to interface to legacy devices and consoles.
Specifications
Processor System
Memory
VPX Interface
Graphics
Ethernet
Front I/O Interface
Operating System
CPU
Max. Speed
Chipset
BIOS
Technology
Max. Capacity
Socket
P1
P2
P3
P4
P5
Controller
Controller
Serial (COM)
Ethernet
USB
Miscellaneous
Compatibility
All product specifications are subject to change without notice
Intel® 4 th Generation Core i3/i5/i7 mobile processors up to 2.4 GHz (6MB L2 cache)
2.4 GHz
Intel Lynx Point (QM87)
Redundant AMI UEFI based 8MByte SPI flash
Dual channel DDR3 1600MHz w/ ECC
Configurable up to 16 GB
1 bank soldered onboard, 1x 204-pin SODIMM
2x SRIOx4 Gen2
2x PCIex8 (1 port NT Capable)
64s PMC IO
12d XMC IO; 2x 10/100/1000BT or 2x SerDes (on request) from I350
2x USB3.0; 2x USB 2.0; 3x SATA-III; DisplayPort x2; UART(2x); Audio; KB/Mouse from SIO
Intel embedded graphic controller Iris (3 independent displays)
Intel I350-AM4 Quad Port Gigabit Ethernet Controller
1 RS-232 on RJ-45 connector
2 x RJ-45 10/100/1000BASE-T
2x USB 3.0, 1x USB2.0
XMC/PMC, VGA
Linux; Windows7; VxWorks6.x (on request)
Last updated : 9-Jun-2015
MIC-6311
Specifications (Cont.)
Storage
Power Requirement
Physical Characteristics
2.5" SSD/SATA
CFast
Onboard Flash
Consumption
SATA III
SATA II
8G
56.3W total power envelope with 37W CPU (on request)
66.3W total power envelope with 47W CPU
6HP, 160.00 x 233.35 mm (6.30" x 9.19") (W x D)
0.95kg without peripherals
Operating
Grade 1: 0 ~ 55°C
Grade 2: -25 ~ 70 °C (on request)
95% @ 40° C, non-condensing
PCB Dimensions
Weight
Temperature
Environment
Humidity
Bump
Vibration (5 ~ 500 Hz)
Altitude
VPX
Compliance
Safety
EMC
Note: 1. CFast and 2.5" SSD are mutually exclusive.
Non-operating
-40 ~ 85 °C
95% @ 60° C, non-condensing
25G, 6ms
3.5Grms (without onboard HDD)
15,000ft, 55° C above sea level
40,000ft, -40° C above sea level
OpenVPX (VITA 65)
FCC class A, CE, RoHS
FCC47 CFR Part15, Class A, CE Mark (EN55022/EN55024/EN300386)
Ordering Information
System Board
Model Number
MIC-6311-A1I8E
MIC-6311-B1I8E
MIC-6311-B2C8E
Front Panel
USB3.0
VGA
(type A)
1
2
1
2
-
USB2.0
(type A)
1
1
-
Ethernet
(RJ-45)
2
2
-
Console
(RJ-45)
1
1
-
One CFast Socket / HDD
mounting site
XMC /
PMC
1
1
-
Main On-board Features
Onboard CFast
CPU
Memory Socket
i7-4700QE
8GB
1
i5-4402E
8GB
1
i5-4402E
8GB
1
Memory SODIMM socket
Front panel
(From left to right):
VGA
RJ45(console)
USB2.0 USB3.0
XMC/ PMC
USB 3.0
Two RJ45
One passive
CPU heatsink
Online Download www.advantech.com/products
Storage
Channel
1 SATA-III
1 SATA-III
-
SODIMM
Socket
1
1
-
BMC
No
No
Yes
Similar pages