ETC2 HT11-020 Nema 11 high torque step motor Datasheet

Applied Motion Products, Inc.
404 Westridge Dr.
Watsonville, CA 95076, USA
1-800-525-1609
Tel (831) 761-6555
Fax (831) 7616544
Product Datasheet
www.Applied-Motion.com
HT11-020
1pc. - 41.00
50pc. - 30.75
NEMA 11 High Torque Step Motor
Product Features
2-phase hybrid step motor
High torque design
Standard NEMA 11 dimensions
Description
Product Description:
The HT11-020 two-phase stepper motor is suitable for a wide range of motion control applications.
Specifications
Part Number:
HT11-020
Frame Size:
NEMA 11
Motor Type:
High torque
Part Number w/Double
Shaft:
HT11-020D
Motor Length:
1.22 inches
Number of Lead
Wires:
Lead Wire
Configuration:
Lead Wire/Cable
Length:
Lead Wire Gauge:
Bipolar Holding
Torque:
Step Angle:
4
flying leads, no connector
8 inches inches
26 AWG
7.08 oz-in
1.8 deg
Bipolar Parallel
Current:
1.0 A/phase
Bipolar Parallel
Resistance:
1.4 Ohms/phase
Bipolar Parallel
Inductance:
1.3 mH/phase
Rotor Inertia:
Integral Gearhead:
Weight:
Storage Temperature:
Operating
Temperature:
Insulation Class:
1.27E-04 oz-in-sec2
No
0.22 lbs
-30 to 70 °C
-20 to 50 °C
Class B (130 ºC)
Maximum Radial Load:
3.37 lbs
Maximum Thrust
Load:
1.80 lbs
Shaft Run Out:
0.001 inch T.I.R. max
Radial Play:
0.001 inch max w/ 1.1 lb load
End Play:
0.003 inch max w/ 1.1 lb load
Perpendicularity:
0.004 inches
Concentricity:
0.003 inches
Downloads
Family Datasheet:
Datasheet:
StepMotorWiring-4-lead.pdf
http://s3.amazonaws.com/applied-motion-pdf/HT11-020.pdf
2D Drawing:
HT11-020_RevA.pdf
3D Drawing:
HT11-020.igs
HT11-020D.igs
Speed-Torque Curves:
HT11-020_TorqueCurves.pdf
Torque Curves
Pricing
HT11-020
HT11-020D
Part No. w/ Single Shaft
Part No. w/ Double Shaft
1pc.
$41.00
$41.00
25pc.
$35.26
$35.26
50pc.
$30.75
$30.75
100pc.
Request a Quote for 100+ piece pricing.
Similar pages