ETC2 MB6G Multipurpose boxes with lid Datasheet

Multipurpose Boxes with Lids
ABS
Multipurpose Boxes with Lids
These boxes are moulded in ABS to give maximum strength but can be easily punched or drilled for individual requirements and to
produce a professional looking end product. They are available in black, white and light grey. MB2, MB3, MB5 and MB8 have
polished finish
Printed circuit board slots are provided on certain types to allow ease of manufacture
• Wide range of multipurpose boxes
• Integral PCB guides (except MB6, MB6W and MB6G)
• Lid retained by M3.5 screws into brass inserts
• Employ high-performance ferrites with superior frequency characteristics
• CMB4, MB6 and MB7 have matt finish
• MB4 and MB6 lids retained by 6 × 4 BA screws into brass inserts
Dimension Table
Overall Dimensions
Width
(W)
Depth
(D)
Height
(H)
Nominal Wall
Thickness
100
76
41
118
98
45
216
130
85
4
150
100
60
2.5
220
150
64
3
177
120
83
150
80
50
1.5
2.5
Rib Spacing Rib Spacing
Side
Side
(W)
(D)
Black Part
Number
White Part
Number
Grey Part
Number
20
20
-
MB2W
-
23
33
-
MB3W
-
20
-
MB4W
MB4G
32
MB5
MB5W
MB5G
-
-
MB6
MB6W
MB6G
23
40
-
MB7W
MB7G
20
23
MB8
MB8W
MB8G
20
Dimensions : Millimetres
www.element14.com
www.farnell.com
www.newark.com
Page <1>
14/04/12 V1.1
Multipurpose Boxes with Lids
ABS
Material Data
ABS material - Ronfalin 103 grade
Properties
Mechanical Properties
Charpy notched impact strength
at +23 °C
at -20 °C
Unit
kJ / m2
10
7
Test Methods
ISO
DIN
-
-
179/2c
53453
-
-
-
-
180/3A
-
-
-
-
-
R527/1C
53455-3-5
-
-
-
-
178B
-
-
53452
-
-
Izod notched impact strength
at +23 °C (thickness 6.4 mm)
at -20 °C (thickness 6.4 mm)
kJ / m2
17
9
Tensile test
Tensile strength at yield
Elongation at yield
N / mm2
49
4
Flexural test
Flexural strength
Modulus in flexure
N / mm2
87
2,400
Surface hardness
Rockwell hardness
Ball indention hardness
R scale
110
90
-
-
2039/2
-
2039/1
53456
°C
75/A
53461/A
-
-
90
97
-
-
-
-
97
94HB (1.5 mm)
306/B50
53460
UL94
-
kg / m3
-
-
1,050
1183/A
53479
Melt flow index
13
1133/19
53735/U
Gloss
59
-
67530
200 to 230 °C
-
-
Thermal Properties
HDT
Unannealed
Annealed
Vicat softening temperature
Flammability properties
Physical Properties
Density
Processing temperatures
www.element14.com
www.farnell.com
www.newark.com
Page <2>
14/04/12 V1.1
Multipurpose Boxes with Lids
ABS
Part Number Explanation:
MB2
W
Type
Colour
Type
Colours
: MB2, MB3, MB4, MB5, MB6, MB7 and MB8
: Blank = Black, W = White and G = Grey
Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of
it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
www.element14.com
www.farnell.com
www.newark.com
Page <3>
14/04/12 V1.1
Similar pages