Kingbright APT3216QWF-D Low power consumption Datasheet

3.2mmx1.6mm SMD CHIP LED LAMP
Part Number: APT3216QWF/D
White
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Descriptions
z 3.2mmx1.6mm SMT LED, 0.75mm thickness.
z The source color devices are made with InGaN Light
Emitting Diode.
z Low power consumption.
z Electrostatic discharge and power surge could damage
z Wide viewing angle.
z Ideal for backlight and indicator.
the LEDs.
z It is recommended to use a wrist band or anti-
z Package : 2000pcs / reel.
z Moisture sensitivity level : level 3.
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
z RoHS compliant.
electrically grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAI2506
REV NO: V.10B
DATE: APR/08/2015
PAGE: 1 OF 6
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: L.Q.Xie
ERP: 1203001960
Selection Guide
Part No.
Dice
APT3216QWF/D
Lens Type
White (InGaN)
Yellow Fluorescent
Viewing
Angle [1]
Iv (mcd) [2]
@ 20mA
Min.
Typ.
2θ1/2
120
250
120°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
VF [1]
Forward Voltage
White
IR
Reverse Current
White
Chromaticity Coordinates
White
X [2]
Device
Max.
Units
Test Conditions
3.3
4.0
V
IF=20mA
50
uA
VR = 5V
pF
VF=0V;f=1MHz
0.31
Y [2]
C
Typ.
0.31
Capacitance
White
100
Notes:
1. Forward Voltage: +/-0.1V.
2. Measurement tolerance of the chromaticity coordinates is ±0.01.
3. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
White
Units
Power dissipation
120
mW
DC Forward Current
30
mA
Peak Forward Current [1]
150
mA
5
V
Reverse Voltage
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAI2506
REV NO: V.10B
DATE: APR/08/2015
PAGE: 2 OF 6
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: L.Q.Xie
ERP: 1203001960
White
APT3216QWF/D
SPEC NO: DSAI2506
REV NO: V.10B
DATE: APR/08/2015
PAGE: 3 OF 6
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: L.Q.Xie
ERP: 1203001960
APT3216QWF/D
White CIE
0.40
c0
0.35
y
b1
0.30
b2
a0
0.25
a2
0.20
0.20
0.25
0.30
0.35
0.40
x
a2
b1
x
y
x
y
x
y
0.263
0.213
0.282
0.245
0.298
0.271
0.282
0.245
0.298
0.271
0.313
0.296
0.265
0.265
0.286
0.299
0.306
0.332
0.242
0.226
0.265
0.265
0.286
0.299
0.313
0.296
0.329
0.325
0.329
0.325
0.358
0.372
0.329
0.371
0.363
0.400
0.306
0.332
0.329
0.371
a0
c0
b2
Notes:
Shipment may contain more than one chromaticity regions.
Orders for single chromaticity region are generally not accepted.
Measurement tolerance of the chromaticity coordinates is ±0.01.
SPEC NO: DSAI2506
REV NO: V.10B
DATE: APR/08/2015
PAGE: 4 OF 6
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: L.Q.Xie
ERP: 1203001960
APT3216QWF/D
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAI2506
REV NO: V.10B
DATE: APR/08/2015
PAGE: 5 OF 6
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: L.Q.Xie
ERP: 1203001960
PACKING & LABEL SPECIFICATIONS
APT3216QWF/D
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAI2506
REV NO: V.10B
DATE: APR/08/2015
PAGE: 6 OF 6
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: L.Q.Xie
ERP: 1203001960
Similar pages