IRSM005-301MH Half-Bridge IPM for Low Voltage Applications 30A, 100V Description The IRSM005-301MH is a general purpose half-bridge with integrated gate driver in an attractive 7x8mm PQFN package. It is a general purpose building block suitable for a variety of low voltage applications where power density is of critical importance. Typical examples would be advanced motor drives, dc-to-ac and dcto-dc converters. Features • Package with low thermal resistance and minimal parasitics • Low on-resistance HEXFETs: 16 mΩ typ. • Undervoltage lockout on Vcc and Vbs • Independent gate drive in phase with logic input • Gate drive supply range from 10V to 20V • Propagation delay matched to defined spec • 3.3V, 5V and 15V logic input compatible • RoHS compliant Internal Electrical Schematic Ordering Information 1 Orderable Part Number Package Type Form Quantity IRSM005-301MH PQFN 7x8mm Tray 1300 IRSM005-301MHTR PQFN 7x8mm Tape and Reel 2000 www.irf.com © 2014 International Rectifier March 18, 2014 IRSM005-301MH Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the module may occur. These are not tested at manufacturing. All voltage parameters are absolute voltages referenced to VSS unless otherwise stated in the table. The thermal resistance rating is measured under board mounted and still air conditions. Symbol Description Min Max Unit VDS MOSFET Drain-to-Source Voltage --- 100 V IO Maximum DC current per MOSFET @ TC=25°C (Note1) --- 30 A Pd Maximum Power dissipation per MOSFET @ TC =100°C --- 13.5 W TJ (MOSFET & IC) Maximum Operating Junction Temperature --- 150 °C TS Storage Temperature Range -40 150 °C VB High side floating supply voltage -0.3 VS + 20 V VS High side floating supply offset voltage VB - 20 VB +0.3 V VCC Low Side fixed supply voltage -0.3 20 V VIN Logic input voltage LIN, HIN -0.3 VCC+0.3V V Note1: Calculated based on maximum junction temperature. Bond wires current limit is 20A Inverter Static Electrical Characteristics VBIAS (VCC, VBS)=15V, TJ=25ºC, unless otherwise specified. Symbol Description Min Typ Max Units V(BR)DSS Drain-to-Source Breakdown Voltage 100 --- --- V HIN=LIN=0V, ID=250µA VGS(TH) Gate Threshold Voltage 2.0 3.0 4.0 V ID=100µA RDS(ON) Drain-to-Source Voltage --- 16 21 --- 35 --- --- 20 --- IDSS Zero Gate Voltage Drain Current MOSFET Diode Forward Voltage Drop VSD mΩ 250 --- -- 0.7 0.82 --- 0.6 --- --- +/-100 ID=10A, TJ=25°C ID=10A, TJ=150°C + HIN=LIN=0V, V =100V µA --- Conditions V + HIN=LIN=0V, V =100V, TJ=125°C IF=10A IF=10A, TJ=125°C IGSS Gate to Source leakage --- nA RBSOA Reverse Bias Safe Operating Area FULL SQUARE, limited by TJmax Total gate charge --- 36 54 Gate to source charge --- 7 --- Gate to drain charge --- 11 --- Single Pulse Avalanche Energy 6.1 - VGS=+/-20V + QG QGS QGD EAS 2 www.irf.com © 2014 International Rectifier nC V = 100V, VCC=+15V to 0V ID =26A VDS = 20V VGS=10V mJ March 18, 2014 IRSM005-301MH Recommended Operating Conditions Driver Function For proper operation the device should be used within the recommended conditions. All voltages are absolute referenced to COM. The VS offset is tested with all supplies biased at 15V differential. For more details, see IRS2005 data sheet. Symbol Definition Min Typ Max Units VB High side floating supply voltage VS+10 VS+15 VS+20 V VS High side floating supply offset voltage Note 1 --- 100 V VCC Low side and logic fixed supply voltage 10 15 20 V VIN Logic input voltage LIN, HIN COM --- VCC V HIN High side PWM pulse width 1 --- --- µs Deadtime Suggested dead time between HIN and LIN 0.3 0.5 --- µs Static Electrical Characteristics Driver Function VBIAS (VCC, VBS)=15V, TJ=25ºC, unless otherwise specified. The VIN, and IIN parameters are referenced to COM Symbol Definition Min Typ Max Units VIN,th+ Positive going input threshold for LIN, HIN 2.5 --- --- V VIN,th- Negative going input threshold for LIN, HIN --- --- 0.8 V VBSUV+ VBS supply undervoltage, Positive going threshold 8.0 8.9 9.8 V VBSUV- VBS supply undervoltage, Negative going threshold 7.4 8.2 9.0 V VBSUVH VBS supply undervoltage lock-out hysteresis --- 0.8 --- V VCCUV+ VCC/ supply undervoltage, Positive going threshold 8.0 8.9 9.8 V VCCUV- VCC supply undervoltage, Negative going threshold 7.4 8.2 9.0 V VCCUVH VCC supply undervoltage lock-out hysteresis --- 0.8 --- V IQBS Quiescent VBS supply current --- 30 75 µA IQCC Quiescent VCC supply current --- 150 520 µA ILK Offset Supply Leakage Current --- --- 50 µA IO+ IC high output short circuit current 200 290 --- VO=0V VIN=Logic “1” PW<10us IO- IC low output short circuit current 420 600 --- VO=15V VIN=Logic “0” PW<10us IIN+ Input bias current VIN=5V for LIN, HIN --- 4 10 µA IIN- Input bias current VIN=0V for LIN, HIN --- 0.5 1 µA 3 www.irf.com © 2014 International Rectifier March 18, 2014 IRSM005-301MH Dynamic Electrical Characteristics Driver Function VBIAS (VCC, VBS)=15V, TJ=25ºC, CL=1000pF unless otherwise specified. Driver only timing unless otherwise specified. Symbol Description Min Typ Max Units TON Input to Output propagation turn-on delay time (see fig.3) --- 160 220 ns TOFF Input to Output propagation turn-off delay time (see fig. 3) --- 150 220 ns TR Input to Output turn-on rise time (see fig.3) --- 70 170 ns --- 35 95 ns --- --- 50 ns Min Typ Max Units Conditions Input to Output turn-off fall time (see fig. 3) Delay matching, HS and LS turnon/off TF MT Conditions Thermal and Mechanical Characteristics Symbol Description Rth(J-B) Thermal resistance, junction to mounting pad, each MOSFET --- 3.8 --- °C/W Standard reflow-solder process Rth(J-A) Thermal resistance, junction to ambient, each MOSFET --- 40 --- °C/W Mounted on 50mm of four-layer FR4 with 28 vias 2 Input-Output Logic Level Table HIN LIN U,V,W HI HI Shoot-through LO LO ** HI LO V+ LO HI 0 * V+ if motor current is flowing into VS, 0 if current is flowing out of VS into the motor winding 4 www.irf.com © 2014 International Rectifier March 18, 2014 IRSM005-301MH Module Pin-Out Description Pin Name Description 3, 6, 8 COM 2 VCC 15V Gate Drive Supply 4 HIN Logic Input for High Side (Active High) 5 LIN Logic Input for Low Side (Active High) 7 LO Low Side Gate Drive Output 9 G2 Low Side FET Gate 10, 16, 17 VS Phase Output 11 to 15 V- Low Side Source Connection 18 to 23 V+ DC Bus 24 G1 High Side FET Gate 25 HO High Side Gate Drive Output 26, 27 VS Phase Output (-ve of Bootstrap Cap Connection) 1 VB High Side Floating Supply (+ve Bootstrap Cap Connection) Low Side Gate Driver Return 16 VS 17 VS 18-V+ 19 V+ V- 15 V- 14 20 V+ V- 13 21 V+ V- 12 22 V+ V- 11 23 V+ VS 10 24 G1 G2 9 25 HO 28 COM 8 26 VS LO 7 27 VS COM 6 LIN 5 HIN 4 COM VCC 3 2 VB 1 BOTTOM OF PACKAGE VIEW Exposed pad (Pin 28) has to be connected to COM for better electrical performance 5 www.irf.com © 2014 International Rectifier March 18, 2014 IRSM005-301MH Figure 1: Typical Application Connection 1. Bus capacitors should be mounted as close to the module bus terminals as possible to reduce ringing and EMI problems. Additional high frequency ceramic capacitor mounted close to the module pins will further improve performance. 2. Value of the boot-strap capacitors depends upon the switching frequency. Their selection should be made based on IR Design tip DT04-4 or application note AN-1044. Figure 2. IC switching waveforms definitions. 6 www.irf.com © 2014 International Rectifier March 18, 2014 IRSM005-301MH Qualification †† Qualification Level Industrial (per JEDEC JESD 47E) ††† Moisture Sensitivity Level Machine Model ESD Human Body Model RoHS Compliant MSL3 (per IPC/JEDEC J-STD-020C) Class A (±200V) (per JEDEC standard JESD22-A115A) Class 2 (±2000V) (per EIA/JEDEC standard EIA/JES-001A-2011) Yes † Qualification standards can be found at International Rectifier’s web site http://www.irf.com/ †† Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information. HU U ††† Higher MSL ratings may be available for the specific package types listed here. Please contact your International Rectifier sales representative for further information. 7 www.irf.com © 2014 International Rectifier March 18, 2014 IRSM005-301MH Package Outline (Top & Side view) 8 www.irf.com © 2014 International Rectifier March 18, 2014 IRSM005-301MH Package Outline (Bottom View, 1 of 2) 1. 2. 3. 4. 9 For mounting instruction see AN-1168. For recommended PCB via design see AN-1091. For recommended design, solder profile, integration and rework guidelines see AN-1028. For board inspection guidelines see AN-1133. www.irf.com © 2014 International Rectifier March 18, 2014 IRSM005-301MH Tape and Reel Details 10 www.irf.com © 2014 International Rectifier March 18, 2014 IRSM005-301MH Data and Specifications are subject to change without notice IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information 11 www.irf.com © 2014 International Rectifier March 18, 2014