E92307A Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 1000V Output Current 3.0A Features • • • • • Glass passivated Bridge Rectifiers Ideal for automated placement Very low profile - max height 1.4 mm Moisture sensitivity: level 1, per J-STD-020 High temperature soldering guaranteed: 260℃/10 seconds case: E92 Mechanical Data • Case:E92,Molding compound meets UL 94V-0 flammability rating • Terminals:Matte tin plated leads,solderable per MIl-STD-750 Method 2026,J-STD-002 and JESD22B102 Typical Applications General purpose use in ac-to-dc bridge full wave rectification for TV,Monitor,SMPS,Adapter, Printer,Audio equipment,and Home Applications application Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average output rectified current Peak forward surge current 8.3 ms single half sinewave superimposed on rated load Rating for fusing (t≤8.3ms) Operating junction and storage temperature range Symbol E92307A Unit VRRM VRMS VDC 1000 V 700 V 1000 V Io(AV)1) 3.0 Io(AV)2) 2.5 IFSM 95 A I2t TJ, TSTG 38 A2s -55 to +150 °C Electrical Characteristics (TA = 25 °C unless otherwise noted) Parameter Symbol Test Conditions E92307A IF=1.5A,Ta=125℃ IF=3.0A,Ta=25℃ 0.95 VF 1.05 Maximum DC reverse current Ta=25℃ at rated DC blocking voltage Ta=125℃ IR Typical junction capacitance CJ 32 RθJA RθJC TBD Typical thermal resistance 4.0 V, 1 MHz juntion to ambient juntion to case Volts 0.95 IF=3.0A,Ta=125℃ 2) Unit 1.0 IF=1.5A,Ta=25℃ Maximum Instantaneous forward voltage A 5.0 µA 100 TBD pF ℃/W Note 1). mounted recommended copper pad areas with Al substrate PCB 2). mounted 13*13mm copper pad areas with FR-4 PCB www.goodark.com 1/3 2017.06-Rev.A E92307A Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 1000V Output Current 3.0A Package Outline Dimensions unit:mm Dim HE E Min 8.55 7.06 Nom. 8.75 7.26 Max 8.95 7.46 D P 6.40 4.80 6.6 5.0 6.80 5.20 A C L 1.30 0.18 1.00 1.4 0.2 1.30 1.50 0.30 1.50 L1 B A1 0.60 0.85 - 0.75 1.0 0.05 1.00 1.15 - A2 - 3.0 - Soldering Pad Reference Unit:mm www.goodark.com 2/3 2017.06-Rev.A E92307A Surface Mount Glass Passivated Single Phase Bridge Rectifier Reverse Voltage 1000V Output Current 3.0A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer ’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 3/3 2017.06-Rev.A