TDK B78108E1332K000 Rf chokes, bc sery Datasheet

Inductors
RF chokes, BC+ series
Series/Type:
Ordering code:
B78108E, B78148E
Date:
Version:
July 2015
Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then
change the color to "white". This ensures that the table disappears (invisible) for the customer PDF.
Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it!
Identification/Classification 1
Inductors
(header 1 + top left bar):
Identification/Classification 2
RF chokes, BC+ series
(header 2 + bottom left header bar):
Ordering code: (top right header bar)
Series/Type: (bottom right header bar)
B78108E, B78148E
Preliminary data (optional):
Department:
SZ MAG PD IN/T
Date:
July 2015
Version:
 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Inductors
RF chokes, BC+ series
B78108E, B78148E
BC chokes
Rated inductance 0.1 μH … 100 μH
Rated current 640 mA .. 7300 mA
Construction
 Ferrite drum core
 Winding: enamel copper wire
 Flame-retardant lacquer coating
B78108E
Features





Very high rated current
High saturation behaviour
High self-resonance frequency
Suitable for wave soldering
RoHS-compatible
Applications





DC-DC converter
Filtering of supply voltage & battery charger (EMI)
RF blocking and filtering
Decoupling and interference suppression
For telecommunications, LED and energy-saving
lamps, solar LED lamps, entertainment electronics
B78148E
Terminals




Radially bent to 5mm lead spacing (B78148E)
Central axial leads (B78108E)
Base material Cu
Electroplated with nickel and pure tin
Marking
 Inductance indicated by color bands in accordance
with IEC 60062
Delivery mode and packing units
 Taped, Ammo and reel packing
 Packing units:
Ammo
(pcs./pack.)
Axial
2500
Radial
2500
Reel
(pcs./reel)
5000
2000
SZ MAG PD IN/T
Please read Cautions and warnings and
Important notes at the end of this document.
July 2015
Page 2 of 8
Inductors
RF chokes, BC+ series
B78108E, B78148E
Dimensional drawings
B78108E (axial leads, taped)
Dimensions in mm
Minimum lead spacing 12.5 mm
B78148E (central radial leads, taped)
Dimensions in mm
Packing
n (mm):
w (mm):
Dimensions in mm
axial 72 + 1, radial 42 + 1
axial 84 max., radial 54 max.
L x W x H (max. mm):
axial: 275 x 80 x 140, radial: 340 x 50 x 210
SZ MAG PD IN/T
Please read Cautions and warnings and
Important notes at the end of this document.
July 2015
Page 3 of 8
Inductors
RF chokes, BC+ series
B78108E, B78148E
Technical data and measuring conditions
Rated inductance LR
Measured with LCR meter Agilent 4284A
or impedance analyzer Agilent 4294A
Measuring current:
Measuring temperature:
1 mA
+20 ºC
Q factor Qmin
Measured with impedance analyzer Agilent 4294A, +20 °C
Rated temperature TR
+40 °C
Rated current IR
Maximum permissible DC current based on rated temperature
of +40 °C and component temperature of max. +125 °C
Saturation current Isat
Max. permissible DC with inductance decrease
∆L/L0 of approx. 10%, at +20 ºC (Agilent 4284A and 42841A)
DC resistance Rmax
Measured at +20 ºC
Resonance frequency fres,min
Measured with Agilent 4294A or 8753ES, +20 °C
Solderability (lead-free)
Sn95.5Ag3.8Cu0.7:
Wetting of soldering area:
Resistance to soldering heat
(+260 ±5)°C, 10 s (to IEC 60068-2-20, test Tb)
Tensile strength of leads
≥ 20 N (to IEC 60068-2-21, test Ua)
Climatic category
55/125/56 (to IEC 60068-1)
Storage conditions
Mounted: –55 °C ... +125 °C
Packaged: –25 °C ... +40 °C, ≤ 75% RH
Weight
Approx. 0.38 g
(+245 ±5) °C, (3 ±0.3) s
≥ 90% (to IEC 60068-2-20, test Ta)
Mounting information:
When bending the leads, take care that the start-of-winding areas at the face ends (protected by glue
and lacquer) are not subjected to any mechanical stress.
SZ MAG PD IN/T
Please read Cautions and warnings and
Important notes at the end of this document.
July 2015
Page 4 of 8
Inductors
RF chokes, BC+ series
B78108E, B78148E
Characteristics and ordering codes
LR
Tolerance
μH
0.1
fL
MHz
Qmin
fQ
MHz
IR
mA
Isat
mA
Rmax
Ω
fres, min Ordering code 1)
MHz (reel packing) 2)
1.0
50
7.96
7300
17000
0.015
700
B781*8E1101M000
0.15
1.0
50
7.96
6500
14500
0.017
650
B781*8E1151M000
0.22
1.0
55
7.96
5900
12200
0.019
610
B781*8E1221M000
0.33
1.0
60
7.96
5300
10100
0.023
480
B781*8E1331M000
0.47
1.0
60
7.96
5000
8500
0.027
400
B781*8E1471M000
0.68
1.0
60
7.96
4600
7100
0.031
360
B781*8E1681M000
1.0
60
7.96
4150
5800
0.038
260
B781*8E1102K000
1.5
1.0
60
7.96
3800
4800
0.047
235
B781*8E1152K000
2.2
1.0
50
7.96
3400
4000
0.057
150
B781*8E1222K000
3.3
1.0
45
7.96
3050
3250
0.073
75
B781*8E1332K000
4.7
1.0
45
7.96
2750
2700
0.085
35
B781*8E1472K000
6.8
1.0
40
7.96
2450
2300
0.105
25
B781*8E1682K000
10
1.0
35
7.96
2250
2000
0.136
20
B781*8E1103K000
15
0.1
40
0.796
1600
1450
0.230
15
B781*8E1153K000
22
0.1
40
0.796
1300
1250
0.350
12
B781*8E1223K000
0.1
50
0.796
1050
1000
0.550
9.0 B781*8E1333J000
47
0.1
40
0.796
950
870
0.680
8.0 B781*8E1473J000
68
0.1
45
0.796
780
720
0.900
6.5 B781*8E1683J000
100
0.1
60
0.796
640
580
1.450
6.0 B781*8E1104J000
1.0
33
±20% ≙ M
±10% ≙ K
±5% ≙ J
1) Replace the * by code number “0” for axial taping or by “4” for radial taping.
2) For Ammo pack the last digit has to be a “9”. Example: B78108E1223K009
SZ MAG PD IN/T
Please read Cautions and warnings and
Important notes at the end of this document.
July 2015
Page 5 of 8
Inductors
RF chokes, BC+ series
B78108E, B78148E
Impedance |Z| versus frequency f
Inductance L versus DC load current IDC
measured with impedance analyzer Agilent
4294A or S-parameter network analyzer Agilent
8753ES, typical values at +20 °C
measured with LCR meter Agilent 4284A
and 42841A , typical values at +20 °C
Ω
Q factor versus frequency f
measured with impedance analyzer
Agilent 4294A, typical values at +20 °C
Current derating IOP/IR
versus ambient temperature TA
(rated temperature TR = +40 °C)
SZ MAG PD IN/T
Please read Cautions and warnings and
Important notes at the end of this document.
July 2015
Page 6 of 8
Inductors
RF chokes, BC+ series
B78108E, B78148E
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation Washing processes may damage the product due
to the possible static or cyclic mechanical loads (e.g. ultrasonic cleaning). They may cause cracks to
develop on the product and its parts,
which might lead to reduced reliability or lifetime.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to breakage
of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can only
be carried out by the customer.
Display of ordering codes for EPCOS products
The ordering code for one and the same product can be represented differently in data sheets,
data books, other publications and the website of EPCOS, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying represantations of the
ordering codes are due to different processes employed and do not affect the
specifications of the respective products. Detailed information can be found on the Internet
under www.epcos.com/orderingcodes.
SZ MAG PD IN/T
Please read Cautions and warnings and
Important notes at the end of this document.
July 2015
Page 7 of 8
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very high
level of operational safety and especially in customer applications in which the malfunction or
failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of the
customer application or other action taken by the customer (e.g. installation of protective circuitry
or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or
failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material
Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed
questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell,
MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT,
SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries.
Further information will be found on the Internet at www.epcos.com/trademarks.
Page 8 of 8
Similar pages