Lumileds L130-8070001400001 Hot-color targeted industry standard package for uniform light Datasheet

Illumination
LUXEON 3014
Hot-color targeted industry standard
package for uniform light
LUXEON 3014 is an industry standard compatible footprint for ease
of installation into existing 3014 sockets and stays consistent with a
3.0mm x 1.4mm x 0.75mm package. LUXEON 3014 is hot-color targeted
at operating conditions—65°C. This low power device is an ideal
choice when uniformity and reduction in spottiness is necessary for
indoor designs.
Features and Benefits
Primary Applications
Industry standard footprint and package offering compatibility with
existing designs
Indoor Area Lighting
1/9th ANSI micro-color binning enables tight color control
Lamps
Hot-color targeted at 65°C which leads to better color accuracy
Specialty Lighting
Rectangular package design allows for increased uniformity
–– Monochrome LED
Drive at maximum current, 120mA for superior value
–– Channel Lighting
–– Signage
RoHS
DS208 LUXEON 3014 Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved.
No. E352519
COMPLIANT
Table of Contents
General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Packaging and Labeling Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Pocket Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Moisture Barrier Bag (MBB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Shipment Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
i
General Product Information
Product Test Conditions
LUXEON 3014 LEDs are tested with a 20ms monopulse of 60mA at a junction temperature,Tj, of 25°C. Forward voltage and
luminous flux are binned at a Tj of 25°C, while color is hot targeted at a Tj of 65°C.
Part Number Nomenclature
Part numbers for LUXEON 3014 follow the convention below:
L 1 3 0 – A A B B Y Y 1 4 0 0 0 0 C
Where:
A A –
designates nominal CCT (22=2200K, 25=2500K, 27=2700K, 30=3000K, 35=3500K, 40=4000K,
50=5000K, 57=5700K, 65=6500K, 80=8000K, 10=10000K)
B B –
designates minimum CRI (70=70CRI, 80=80CRI, 90=90CRI)
Y Y –
designates platform (HE=new generation for 80CRI, 00=previous generation)
C
designates Lumileds internal code (1 is full distribution base part; 2, 3, etc.=shares the same base part)
–
Therefore, the following part number is used for a new generation LUXEON 3014 3000K 80CRI:
L 1 3 0 – 3 0 8 0 H E 1 4 0 0 0 0 C
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 3014 is
compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the
RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted
materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE).
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1. Product performance of LUXEON 3014 at 60mA and 30mA at test temperature.
Minimum
CRI [2, 3, 4]
Minimum
8000K
70
25
10000K
70
23
Typical
Luminous
Efficacy (lm/W)
Typical
Luminous
Efficacy (lm/W)
Typical
Luminous
Flux (lm)
28
150
15
172
L130-8070001400001
27
145
14
166
L130-1070001400001
Luminous Flux [3] (lm)
Nominal
CCT [1]
Typical
60mA
Part Number
30mA
2200K
80
19
22
118
12
135
L130-2280HE1400001
2500K
80
21
24
129
12
148
L130-2580HE1400001
2700K
80
23
26
140
13
161
L130-2780HE1400001
3000K
80
23
26
140
13
161
L130-3080HE1400001
3500K
80
23
26
140
13
161
L130-3580HE1400001
4000K
80
25
28
150
15
172
L130-4080HE1400001
5000K
80
25
28
150
15
172
L130-5080HE1400001
5700K
80
25
28
150
15
172
L130-5780HE1400001
6500K
80
25
27
145
15
166
L130-6580HE1400001
2200K
90
16
18
97
9
99
L130-2290001400001
2700K
90
18
20
102
11
118
L130-2790001400001
3000K
90
19
20
102
11
118
L130-3090001400001
3500K
90
19
22
113
12
129
L130-3590001400001
4000K
90
20
23
113
12
129
L130-4090001400001
5000K
90
20
23
118
13
140
L130-5090001400001
5700K
90
20
23
118
13
140
L130-5790001400001
6500K
90
20
23
113
12
129
L130-6590001400001
Notes for Table 1:
1. Correlated color temperature is hot targeted at Tj=65°C.
2. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements.
3. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed.
4. For 90CRI products, R9≥50.
Optical Characteristics
Table 2. Optical characteristics for LUXEON 3014 at 60mA, Tj=25°C.
Part Number
Typical Total Included Angle [1]
Typical Viewing Angle [2]
L130-xxxxxx1400001
140°
116°
Notes for Table 2:
1. Total angle at which 90% of total luminous flux is captured.
2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
3
Electrical and Thermal Characteristics
Table 3. Electrical and thermal characteristics for LUXEON 3014 at 60mA, Tj=25ºC.
Part Number
Forward Voltage [1] (V)
Minimum
Typical
MAXIMUM
Typical Temperature
Coefficient of Forward
Voltage (mV/°C) [2]
2.8
3.1
3.3
-2.0 to -4.0
L130-xxxxxx1400001
Typical Thermal
Resistance—Junction
to Solder Pad (°C/W)
35
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
2. Measured between 25°C and 85°C.
Absolute Maximum Ratings
Table 4. Absolute maximum ratings for LUXEON 3014.
Parameter
DC Forward Current
Maximum Performance
120mA
[1,2]
Peak Pulsed Forward Current
[1,3]
LED Junction Temperature [1] (DC & Pulse)
150mA
115°C
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Class 2
Operating Case Temperature [1]
-40°C to 105°C
LED Storage Temperature
-40°C to 100°C
Soldering Temperature
JEDEC 020D 260°C
Allowable Reflow Cycles
3
Reverse Voltage (Vreverse)
-5V
Notes for Table 4:
1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed 15% of the maximum allowable DC forward current
3. At 10% duty cycle with pulse width of 10ms.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
4
Characteristic Curves
Spectral Power Distribution Characteristics
Figure 1a. Typical normalized power vs. wavelength for L130-xx70001400001 at 60mA, Tj=25ºC.
Figure 1b. Typical normalized power vs. wavelength for L130-xx80HE1400001 at 60mA, Tj=25ºC.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
5
Figure 1c. Typical normalized power vs. wavelength for L130-xx90001400001 at 60mA, Tj=25ºC.
Light Output Characteristics
Figure 2a. Typical normalized light output vs. junction temperature for L130-xxxxxx1400001 at 60mA.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
6
Figure 2b. Typical normalized light output vs. forward current for L130-xxxxxx1400001 at Tj=25ºC.
Forward Current Characteristics
Figure 3. Typical forward current vs. forward voltage for L130-xxxxxx1400001 at Tj=25ºC.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
7
Radiation Pattern Characteristics
Figure 4. Typical radiation pattern for L130-xxxxxx1400001 at 60mA, Tj=25ºC.
Figure 5. Typical polar radiation pattern for L130-xxxxxx1400001 at 60mA, Tj=25ºC.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
8
Product Bin and Labeling Definitions
Decoding Product Bin Labeling
In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or
dominant wavelength and forward voltage.
LUXEON 3014 LEDs are labeled using a 5-digit alphanumeric CAT code following the format below:
A x B C D
A x
– designates luminous flux bin (example: G0=19 to 21 lumens, J1=25 to 27 lumens)
B C
– designates color bin (example: 7D, 7E, 7F, 7G, 7H, 7J, 7K, 7L, 7M for 3000K parts)
D
– designates forward voltage bin (example: T=2.80 to 2.90V, W=3.00 to 3.10V)
Therefore, a LUXEON 3014 with a lumen range of 25 to 27, color bin of 7D and a forward voltage range of 2.80 to 2.90V has the
following CAT code:
J 1 7 D T
Luminous Flux Bins
Table 5 lists the standard luminous flux bins for LUXEON 3014 emitters. Although several bins are outlined, product availability in
a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.
Table 5. Luminous flux bin definitions for LUXEON 3014 at 60mA, Tj=25°C.
Bin
Luminous Flux [1] (lm)
Minimum
Maximum
E0
15
17
F0
17
19
G0
19
21
H1
21
23
H2
23
25
J1
25
27
J2
27
29
K1
29
31
K2
31
33
Notes for Table 5:
1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
9
Color Bin Definitions
Figure 6. 3-, 4- and 5-step MacAdam ellipse illustration for Table 6.
Figure 7a. Color bin structure for LUXEON 3014 2200K, hot-color targeted at Tj=65°C.
Table 6a. 3- and 5-step MacAdam ellipse color bin definitions for L130-22xxHE1400001 at 60mA, hot-color targeted at Tj=65°C.
Nominal CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, θ
2200K
Single 3-step MacAdam ellipse
(0.5037, 0.4142)
0.0072
0.0042
51.0°
2200K
Single 5-step MacAdam ellipse
(0.5037, 0.4142)
0.0120
0.0070
51.0°
Notes for Table 6b:
1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
10
Figure 7b. Color bin structure for LUXEON 3014 2500K, hot-color targeted at Tj=65°C.
Table 6b. 3- and 5-step MacAdam ellipse color bin definitions for L130-25xxHE1400001 at 60mA, hot-color targeted at Tj=65°C.
Nominal CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, θ
2500K
Single 3-step MacAdam ellipse
(0.4753, 0.4127)
0.0075
0.0042
53.0°
2500K
Single 5-step MacAdam ellipse
(0.4753, 0.4127)
0.0125
0.0070
53.0°
Notes for Table 6b:
1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.
0.450
0.440
0.430
8J
0.420
8K
8F
8E
y
0.410
8D
8G
8H
0.400
8M
8L
2580
0.390
2870K
0.380
0.370
0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465 0.470 0.475 0.480 0.485 0.490
x
Figure 7c. Color bin structure for LUXEON 3014 2700K, hot-color targeted at Tj=65°C.
Table 6c. 3- and 5-step MacAdam ellipse color bin definitions for L130-27xxxx1400001 at 60mA, hot-color targeted at Tj=65°C.
Nominal CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, θ
2700K
Single 3-step MacAdam ellipse
(0.4578, 0.4101)
0.00810
0.00420
53.70°
2700K
Single 5-step MacAdam ellipse
(0.4578, 0.4101)
0.01350
0.00700
53.70°
Notes for Table 6c:
1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
11
0.445
0.435
0.425
7K
0.415
7J
y
7E
7F
0.405
7D
0.395
7M
7H
2870K
0.385
0.375
7G
7L
3200K
0.365
0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465
x
Figure 7d. Color bin structure for LUXEON 3014 3000K, hot-color targeted at Tj=65°C.
Table 6d. 3- and 5-step MacAdam ellipse color bin definitions for L130-30xxxx1400001 at 60mA, hot-color targeted at Tj=65°C.
Nominal CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, θ
3000K
Single 3-step MacAdam ellipse
(0.4338, 0.4030)
0.00834
0.00408
53.22°
3000K
Single 5-step MacAdam ellipse
(0.4338, 0.4030)
0.01390
0.00680
53.22°
Notes for Table 6d:
1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.
0.430
0.420
0.410
6K
0.400
6F
6J
y
6E
6D
0.390
6G
6L
6H
0.380
3250K
6M
0.370
3750K
0.360
0.380 0.385 0.390 0.395 0.400 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440
x
Figure 7e. Color bin structure for LUXEON 3014 3500K, hot-color targeted at Tj=65°C.
Table 6e. 3- and 5-step MacAdam ellipse color bin definitions for L130-35xxxx1400001 at 60mA, hot-color targeted at Tj=65°C.
Nominal CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, θ
3500K
Single 3-step MacAdam ellipse
(0.4073, 0.3917)
0.00927
0.00414
54.00°
3500K
Single 5-step MacAdam ellipse
(0.4073, 0.3917)
0.01545
0.00690
54.00°
Notes for Table 6e:
1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
12
0.420
0.410
0.400
0.390
y
5K
5F
5E
5J
0.380
5D
5L
5G
0.370
5H
3750K
5M
0.360
4250K
0.350
0.340
0.360 0.365 0.370 0.375 0.380 0.385 0.390 0.395 0.400 0.405 0.410
x
Figure 7f. Color bin structure for LUXEON 3014 4000K, hot-color targeted at Tj=65°C.
Table 6f. 3- and 5-step MacAdam ellipse color bin definitions for L130-40xxxx1400001 at 60mA, hot-color targeted at Tj=65°C.
Nominal CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, θ
4000K
Single 3-step MacAdam ellipse
(0.3818, 0.3797)
0.00939
0.00402
53.72°
4000K
Single 5-step MacAdam ellipse
(0.3818, 0.3797)
0.01565
0.00670
53.72°
Notes for Table 6f:
1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.
0.390
0.380
3K
0.370
3F
3J
0.360
3E
y
3G
3D
0.350
3L
3H
4750K
3M
0.340
5250K
0.330
0.320
0.325
0.330
0.335
0.340
0.345
0.350
0.355
0.360
0.365
x
Figure 7g. Color bin structure for LUXEON 3014 5000K, hot-color targeted at Tj=65°C.
Table 6g. 3- and 5-step MacAdam ellipse color bin definitions for L130-50xxxx1400001 at 60mA, hot-color targeted at Tj=65°C.
Nominal CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, θ
5000K
Single 3-step MacAdam ellipse
(0.3447, 0.3553)
0.00822
0.00354
59.62°
5000K
Single 5-step MacAdam ellipse
(0.3447, 0.3553)
0.01370
0.00590
59.62°
Notes for Table 6g:
1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
13
0.370
0.360
2K
0.350
2F
2J
2E
0.340
y
2G
2D
2L
5250K
2H
0.330
2M
6000K
0.320
0.310
0.310
0.315
0.320
0.325
0.330
0.335
0.340
0.345
0.350
x
Figure 7h. Color bin structure for LUXEON 3014 5700K, hot-color targeted at Tj=65°C.
Table 6h. 3- and 5-step MacAdam ellipse color bin definitions for L130-57xxxx1400001 at 60mA, hot-color targeted at Tj=65°C.
Nominal CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, θ
5700K
Single 3-step MacAdam ellipse
(0.3287, 0.3417)
0.00746
0.00320
59.09°
5700K
Single 5-step MacAdam ellipse
(0.3287, 0.3417)
0.01243
0.00533
59.09°
Notes for Table 6h:
1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.
0.365
0.355
0.345
1K
1F
0.335
1J
y
1E
0.325
1D
1G
1L
6000K
1H
1M
0.315
7000K
0.305
0.295
0.290
0.295
0.300
0.305
0.310
0.315
0.320
0.325
0.330
0.335
x
Figure 7i. Color bin structure for LUXEON 3014 6500K, hot-color targeted at Tj=65°C.
Table 6i. 3- and 5-step MacAdam ellipse color bin definitions for L130-65xxxx1400001 at 60mA, hot-color targeted at Tj=65°C.
Nominal CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, θ
6500K
Single 3-step MacAdam ellipse
(0.3123, 0.3282)
0.00669
0.00285
58.57°
6500K
Single 5-step MacAdam ellipse
(0.3123, 0.3282)
0.01115
0.00475
58.57°
Notes for Table 6i:
1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
14
Figure 7j. Color bin structure for LUXEON 3014 8000K, hot-color targeted at Tj=65°C.
Table 6j. 4-step MacAdam ellipse color bin definitions for L130-8070001400001 at 60mA, hot-color targeted at Tj=65°C.
Nominal CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, θ
8000K
Single 4-step MacAdam ellipse
(0.2966, 0.3126)
0.00844
0.00334
58.64°
Notes for Table 6j:
1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.
Figure 7k. Color bin structure for LUXEON 3014 10000K, hot-color targeted at Tj=65°C.
Table 6k. 4-step MacAdam ellipse color bin definitions for L130-1070001400001 at 60mA, hot-color targeted at Tj=65°C.
Nominal CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, θ
10000K
Single 4-step MacAdam ellipse
(0.2720, 0.2860)
0.00877
0.00332
63.28°
Notes for Table 6k:
1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
15
Forward Voltage Bins
Table 7. Forward voltage bin definitions for LUXEON 3014 at 60mA, Tj=25°C.
Forward Voltage [1] (V)
Bin
Minimum
Maximum
T
2.80
2.90
V
2.90
3.00
W
3.00
3.10
X
3.10
3.20
Y
3.20
3.30
Z
3.30
3.40
Notes for Table 7:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
Mechanical Dimensions
MAX 3,2
1,15
MAX 3,1
1,4
0,75
0,30
± 0,08
2,50
0,70
0,75
2,9
0,7
1,6
Figure 8. Mechanical dimensions for LUXEON 3014.
Notes for Figure 8:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
16
Reflow Soldering Guidelines
tp
Tp
Critical Zone
TL to Tp
Ramp-up
TL
Temperature
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat Area
25
Time 25ºC to Peak
JEDEC J-STD-020D
Time
Figure 9. Visualization of the acceptable reflow temperature profile as specified in Table 8.
Table 8. Reflow profile characteristics for LUXEON 3014.
PROFILE FEATURE
Lead-Free Assembly
Preheat Minimum Temperature (Tsmin)
150°C
Preheat Maximum Temperature (Tsmax)
200°C
Preheat Time (tsmin to tsmax)
60 to 120 seconds
Ramp-Up Rate (TL to Tp)
3°C / second maximum
Liquidus Temperature (TL)
217°C
Time Maintained Above Temperature TL (tL)
60 to 150 seconds
Peak / Classification Temperature (Tp)
260°C
Time Within 5°C of Actual Temperature (tp)
20 to 40 seconds
Ramp-Down Rate (Tp to TL)
6°C / second maximum
Time 25°C to Peak Temperature
8 minutes maximum
JEDEC Moisture Sensitivity
Table 9. Moisture sensitivity levels for LUXEON 3014.
level
3
Floor Life
Soak Requirements Standard
TIme
Conditions
Time
Conditions
168 Hours
≤30°C / 60% RH
192 Hours +5 / -0
30°C / 60% RH
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
17
Solder Pad Design
0.11
Solder mask
1.51
Stencil
0.62
1.61
0.36
0.72
0.70
0.80
0.60
Top copper
Package geometric center
0.69
0.79
Figure 10. Recommended PCB solder pad layout for LUXEON 3014.
Notes for Figure 10:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
Packaging and Labeling Information
There are two labeling formats used on the reel, moisture barrier bag (MBB) and shipment box. Either Format A or Format B is
used throughout all the packaging steps. Lumileds uses CODE 128 barcode font on all the labels.
Pocket Tape
Figure 11. Pocket tape dimensions for LUXEON 3014.
Notes for Figure 11:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
18
Reel
Figure 12. Reel dimensions for LUXEON 3014.
Notes for Figure 12:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
Figure 13a: Example of reel label format A.
Figure 13b. Example of reel label format B.
Notes for Figure 13a and Figure 13b — Reel Label descriptions for customer use:
QR code and all other field labels not described are for Lumileds internal use only.
1. Number of LED emitters in a reel.
2. Lumileds part number.
3. Product category code.
4. Unique production lot identification number. First six numbers refer to manufacturing date code in YYMMDD format. This number is required for traceability purpose.
5. Country code of origin of manufacturing of parts. E.g. MY for Malaysia, CN for China according to ISO 3166-1 alpha-2 document.
6. Lumileds product name. Lumileds part number is provided in MBB label Format B #2 as shown in Figure 25c.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
19
Moisture Barrier Bag (MBB)
Figure 14. Illustration of typical Moisture Barrier Bag (MBB) packaging of a LUXEON emitter reel. MBB consists of humidity indicator
card, desiccant bag, MBB label(s) and LED emitter reel. The MBB package is air-tight sealed per JEDEC J-STD-033C.
Notes for Figure 14:
1. Drawings are not to scale.
There are two MBB labels attached (#1 and #2). The peeled off label (Figure 28) must be detached and affixed to the reel upon
opening of the MBB package.
Figure 15a. Example of MBB label format A.
Notes for Figure 15a — MBB label descriptions for customer use:
QR code and all other field labels not described are for Lumileds internal use only.
1. Number of LED emitters in a reel.
2. Lumileds part number.
3. Customer part number for custom requests only.
4. LED test date in YYWW format.
5. Kitting information for custom request only.
6. Unique production lot identification number. First six numbers refer to manufacturing date code in YYMMDD format. This number is required for traceability purpose.
7. Product category code.
8. Date in which MBB was sealed in YYYYMMDD format.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
20
Figure 15b. Example of MBB label format B #1.
Figure 15c. Example of MBB label format B #2.
Notes for Figure 15b and Figure 15c — MBB label descriptions for customer use:
QR code and all other field labels not described are for Lumileds internal use only.
1. Number of LED emitters in a reel.
2. Lumileds product name.
3. LED test date in YYWW format.
4. Unique production lot identification number. First six numbers refer to manufacturing date code in YYMMDD format. This number is required for traceability purpose.
5. Product category code.
6. Date in which MBB was sealed in YYYYMMDD format.
7. Lumileds part number.
8. Customer part number for custom requests only.
9. Kitting information for custom request only.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
21
Shipment Box
Figure 16. Illustration of MBBs packing into a shipment box.
Notes for Figure 16:
1. Drawings are not to scale.
Figure 17a. Example of shipment box label format A.
Notes for Figure 17a — Shipment box label descriptions for customer use:
All other field labels not described are for Lumileds internal use only.
1. Lumileds part number.
2. Customer part number for custom requests only.
3. Maximum of 10 reels printed per label. For example, if there are 21 reels in a shipment box, there will be 3 labels printed.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
22
Figure 17b. Example of shipment box label format B.
Notes for Figure 17b — Shipment box label descriptions for customer use:
All other field labels not described are for Lumileds internal use only.
1. Lumileds part number.
2. Customer part number for custom requests only.
3. Total number of LED emitters in a shipment box.
4. Maximum of 10 reels printed per label. For example, if there are 21 reels in a shipment box, there will be 3 labels printed.
5. Lumileds product name.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
23
About Lumileds
Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking
LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge.
With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by
maintaining an unwavering focus on quality, innovation and reliability.
To learn more about our portfolio of light engines, visit lumileds.com.
©2017 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds Holding B.V.
in the United States and other countries.
lumileds.com
DS208 LUXEON 3014
Product Datasheet 20170601
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or
any other damages, direct, indirect or consequential, resulting from the use of the provided
information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to
provide the most accurate information and data, the materials and services information and data
are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees
the contents and correctness of the provided information and data. Lumileds Holding B.V. and its
affiliates reserve the right to make changes without notice. You as user agree to this disclaimer
and user agreement with the download or use of the provided materials, information and data.